Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Raman investigation of the uranium compounds U 3 O 8 , UF 4 , UH 3 and UO 3 under pressure at room temperature

Our current state-of-the-art X-ray diffraction experiments are primarily sensitive to the position of the uranium atom. While the uranium - low-Z element bond (such as U-H or U-F) changes under pressure and temperature the X-ray diffraction investigations do not reveal information about the bonding or the stoichiometry. Questions that can be answered by Raman spectroscopy are (i) whether the bonding strength changes under pressure, as observed by either blue- or red-shifted peaks of the Raman active bands in the spectrum and (ii) whether the low-Z element will eventually be liberated and leave the host lattice, i.e. do the fluorine, oxygen, or hydrogen atoms form dimers after breaking the bond to the uranium atom. Therefore Raman spectra were also collected in the range where those decomposition products would appear. Raman is particularly well suited to these types of investigations due to its sensitivity to trace amounts of materials. One challenge for Raman investigations of the uranium compounds is that they are opaque to visible light. They absorb the incoming radiation and quickly heat up to the point of decomposition. This has been dealt with in the past by keeping the incoming laser power to very low levels on the tens of milliWatt range consequently affecting signal to noise. Recent modern investigations also used very small laser spot sizes (micrometer range) but ran again into the problem of heating and chemical sensitivity to the environment. In the studies presented here (in contrast to all other studies that were performed at ambient conditions only) we employ micro-Raman spectroscopy of samples situated in a diamond anvil cell. This increases the trustworthiness of the obtained data in several key-aspects: (a) We surrounded the samples in the DAC with neon as a pressure transmitting medium, a noble gas that is absolutely chemically inert. (b) Through the medium the sample is thermally heat sunk to the diamond anvils, diamond of course possessing the very best heat conductivity of any material. Therefore local heating and decomposition are avoided, a big challenge with other approaches casting doubts on their results. (c) This in turn benefits the signal/noise ratio tremendously since the Raman features of uranium-compounds are very small. The placement of the samples in DACs allows for higher laser powers to impinge on the sample spot while keeping the spot-size larger than in previous studies and keep the samples from heating up. Raman spectroscopy is a very sensitive non-invasive technique and we will show that it is even possible to distinguish the materials by their origin / manufacturer as we have studied samples from Cameco (Canada) and IBI-Labs (US-Florida) and can compare with ambient literature data for samples from Strem (US-MA) and Areva (Pierrelatte, France).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The stress, surface spin and dipolar interaction in the diluted NiFe{sub 2}O{sub 4} nanoparticles by the SiO{sub 2} matrix: Characterization and analyses

Well-dispersed uniform NiFe{sub 2}O{sub 4} nanoparticles (NPs) with an average particle size of 15.4 nm were synthesized by thermal decomposition of a metal–organic salt, and then were diluted in a SiO{sub 2} matrix via a sol–gel method with different concentration. The magnetization (M) dependence of NiFe{sub 2}O{sub 4}/SiO{sub 2} on the temperature (T) and on the applied magnetic field (H) was systematically characterized by the Quantum Design superconducting quantum interference device (SQUID) PPMS system. The results of M ~ H/T divide the magnetic properties between 10 K and 300 K into two regions: the low temperature blocked-particle regime below the blocking temperature T{sub B} and the interacting superparamagnetic (ISP) regime above T{sub B}. In the ISP regime, all samples deviate from the ideal Langevin superparamagnetic behavior due to the effective anisotropy induced by the stress, surface spins and interparticle dipolar interaction. The Raman spectra indicate that the stress in all samples exhibits the vibration behavior, which leads to the effective anisotropy and hence coercivity vibration. - Graphical abstract: Display Omitted - Highlights: • Increase of NiFe{sub 2}O{sub 4} NPs' concentration elevates T{sub B} and broadens ZFC peak. • NiFe{sub 2}O{sub 4}/SiO{sub 2} samples do not exhibit the ideal superparamagnetism above T{sub B}. • Stress leads to the effective anisotropy and hence H{sub c} vibration. • Stress vibration was characterized in detail by the Raman spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Raman measurements in silica glasses irradiated with energetic ions

Ion irradiation with energetic He{sup +} (2.5 MeV), O{sup 4+} (13.5 MeV), Si{sup 4+} (24.4 MeV) and Cu{sup 7+} (32.6 MeV) species at several fluences (from 5 × 10{sup 12} to 1.65 × 10{sup 15} ion/cm{sup 2}) were performed in three types of SiO{sub 2} glasses with different OH content (KU1, KS-4V and Infrasil 301). After ion implantation the Raman spectra were measured and compared with the spectra of unirradiated samples. Irradiated samples of the three fused silica grades exhibit changes in the broad and asymmetric R-band (ω{sub 1} around 445 cm{sup −1}), in D{sub 1} (490 cm−1) and D{sub 2} (605 cm{sup −1}) bands associated to small-membered rings. The D{sub 2} band shows an increase with increasing fluences for different ions, indicating structural changes. Raman spectra of ion-irradiated samples were compared with the spectra of neutron irradiated samples at fluences 10{sup 17} n/cm{sup 2} and 1018 n/cm{sup 2}. Macroscopic surface cracking was detected, mainly at fluences corresponding to deposited energies between 10{sup 23} eV/cm{sup 3} and 10{sup 24} eV/cm{sup 3} (after ion beam shutdown)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Uranium diphosphonates templated by interlayer organic amines

The hydrothermal treatment of uranium trioxide and methylenediphosphonic acid with a variety of amines (2,2-dipyridyl, triethylenediamine, ethylenediamine, and 1,10-phenanthroline) at 200 Degree-Sign C results in the crystallization of a series of layered uranium diphosphonate compounds, [C{sub 10}H{sub 9}N{sub 2}]{l_brace}UO{sub 2}(H{sub 2}O)[CH{sub 2}(PO{sub 3})(PO{sub 3}H)]{r_brace} (Ubip2), [C{sub 6}H{sub 14}N{sub 2}]{l_brace}(UO{sub 2}){sub 2}[CH{sub 2}(PO{sub 3})(PO{sub 3}H)]{sub 2}{center_dot}2H{sub 2}O{r_brace} (UDAB), [C{sub 2}H{sub 10}N{sub 2}]{sub 2}{l_brace}(UO{sub 2}){sub 2}(H{sub 2}O){sub 2}[CH{sub 2}(PO{sub 3}){sub 2}]{sub 2}{center_dot}0.5H{sub 2}O{r_brace} (Uethyl), and [C{sub 12}H{sub 9}N{sub 2}]{l_brace}UO{sub 2}(H{sub 2}O)[CH{sub 2}(PO{sub 3})(PO{sub 3}H)]{r_brace} (Uphen). The crystal structures of the compounds are based on UO{sub 7} units linked by methylenediphosphonate molecules to form two-dimensional anionic sheets in Ubip2 and UDAB, and one-dimensional anionic chains in Uethyl and Uphen, which are charge balanced by protonated amine molecules. Interaction of the amine molecules with phosphonate oxygens and water molecules results in extensive hydrogen bonding in the interlayer. These amine molecules serve both as structure-directing agents and charge-balancing cations for the anionic uranium phosphonate sheets and chains in the formation of the different coordination geometries and topologies of each structure. Reported herein are the syntheses, structural and spectroscopic characterization of the synthesized compounds. - Graphical abstract: The Raman spectra of the synthesized compounds and an illustration of the stacking of the layers with the diprotonated triethylenediamine molecules in [C{sub 6}H{sub 14}N{sub 2}]{l_brace}(UO{sub 2}){sub 2}[CH{sub 2}(PO{sub 3})(PO{sub 3}H)]{sub 2}{center_dot}2H{sub 2}O{r_brace} UDAB. Solvent water molecules are removed for clarity. The corresponding Raman spectra for the complexes synthesized is also shown. The structure is constructed from UO{sub 7} pentagonal bipyramids (yellow), oxygen=red, phosphorus=magenta, carbon=black, and nitrogen=blue. Highlights: Black-Right-Pointing-Pointer Organic amines act both as charge-balancing and as structure-directing agents. Black-Right-Pointing-Pointer Extensive hydrogen bonding interactions with solvent water molecules and amines. Black-Right-Pointing-Pointer Altering the organic amine (size or flexibility) affects structure formation.

36 MATERIALS SCIENCE↗

Mixed quantum/classical approach to OH-stretch inelastic incoherent neutron scattering spectroscopy for ambient and supercooled liquid water and ice Ih

OH-stretch inelastic incoherent neutron scattering (IINS) has been measured to determine the vibrational density of states (VDOS) in the OH-stretch region for liquid water, supercooled water, and ice Ih, providing complementary information to IR and Raman spectroscopies about hydrogen bonding in these phases. In this work, we extend the combined electronic-structure/molecular-dynamics (ES/MD) method, originally developed by Skinner and co-workers to simulate OH-stretch IR and Raman spectra, to the calculation of IINS spectra with small k values. The agreement between theory and experiment in the limit k → 0 is reasonable, further validating the reliability of the ES/MD method in simulating OH-stretch spectroscopy in condensed phases. The connections and differences between IINS and IR spectra are analyzed to illustrate the advantages of IINS over IR in estimating the OH-stretch VDOS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, optical, and magnetic properties of Mn and Fe-doped Co{sub 3}O{sub 4} nanoparticles

Mn and Fe-doped Co{sub 3}O{sub 4} nanoparticles were prepared by a simple precipitation method. The synthesized particles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), UV-Vis absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and vibrating sample magnetometer (VSM) techniques. XRD analysis showed the cubic structure of Co{sub 3}O{sub 4}. SEM and TEM images confirmed the formation of interconnected nanoparticles. Mn and Fe-doped Co{sub 3}O{sub 4} showed broad absorption in the visible region compared to undoped sample and the band gap values are red shifted. Five Raman active modes were observed from the Raman spectra. FTIR spectra confirmed the spinel structure of Co{sub 3}O{sub 4} and the doping of Mn and Fe shifts the vibrational modes to lower wave number region. The magnetic measurements confirmed that Fe-doped Co{sub 3}O{sub 4} shows a little ferromagnetic behavior compared to undoped and Mn-doped Co{sub 3}O{sub 4}, which could be related to the uncompensated surface spins and the finite size effects.

36 MATERIALS SCIENCE↗

TiO{sub 2} synthesized by microwave assisted solvothermal method: Experimental and theoretical evaluation

In this study, a microwave assisted solvothermal method was used to synthesize TiO{sub 2} with anatase structure. The synthesis was done using Ti (IV) isopropoxide and ethanol without templates or alkalinizing agents. Changes in structural features were observed with increasing time of synthesis and evaluated using periodic quantum chemical calculations. The anatase phase was obtained after only 1 min of reaction besides a small amount of brookite phase. Experimental Raman spectra are in accordance with the theoretical one. Micrometric spheres constituted by nanometric particles were obtained for synthesis from 1 to 30 min, while spheres and sticks were observed after 60 min. - Graphical abstract: FE-SEM images of anatase obtained with different periods of synthesis associated with the order–disorder degree. Display Omitted - Highlights: • Anatase microspheres were obtained by the microwave assisted hydrothermal method. • Only ethanol and titanium isopropoxide were used as precursors during the synthesis. • Raman spectra and XRD patterns were compared with quantum chemical calculations. • Time of synthesis increased the short-range disorder in one direction and decreased in another.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A detailed examination of the growth of CdSe thin films through structural and optical characterization

Highlights: ► Urbach tail width decreases by about 200 meV with the film thickness. ► A coefficient of strain of around 3 × 10{sup −3} along [0 0 2] axis was predicted. ► Compressive strain gives rise to about 11 meV red shift in the band gap energy. ► A relative shift of about 2 cm{sup −1} of LO{sub 1} phonon mode in Raman spectra was observed between different thickness films. - Abstract: Different thickness CdSe thin films were grown on glass substrates by physical vapor deposition and characterized by optical and structural investigations. Urbach energy related to the width of the optical absorption tail decreases from 430 meV for a film thickness of 50 nm to 200 meV for 450 nm. The film thickness dependent grain sizes were estimated by using effective mass model under quantum size effect from the shift of around 500 meV in the asymptotic absorption edge. The X-ray diffraction (XRD) pattern is consistent with CdSe hexagonal crystal structure which indicates crystal growth mode along c axis. XRD peaks broaden and shift depending on film thicknesses which are presumably due to strain and size effect. We observe both blue and red shift depending on thickness in Longitudinal Optical phonon frequency in Raman spectra with respect to that of the source CdSe powder which could also be due to strain on thin films and/or finite crystallite size. In this work we combine the results of optical absorption, Raman and XRD spectroscopies to study the evolution of grain size, strain and structural disorder depending on film thickness.

36 MATERIALS SCIENCE↗

Electronic states and phonon properties of Ge{sub x}Si{sub 1−x} nanostructures

Ge{sub x}Si{sub 1−x} nanostructures that can be manipulated through size reduction, geometry variation, and alloying, are considered as one of the key developments for next generation technologies, due to their easy processing, unique properties, and compatibility with the existent silicon-based microelectronic industry. In this review, we have thoroughly discussed the major advances in electronic structures and phonon properties of Ge{sub x}Si{sub 1−x} nanocrystals (NCs). Experimental and theoretical characterization related to several main factors, for example, size, composition, strain, temperature, and interface and surface were presented with special emphasis in low-frequency Raman scattering. Current difficulties in explaining the Raman spectra are the assignment of the low-frequency modes because of the complexity of the environment around the NCs, thus different theoretical models are introduced in detail to deal with different properties of Ge{sub x}Si{sub 1−x} alloy NCs including Lamb’s theory, complex-frequency (CF) model, core–shell matrix (CMS) model and spatial coherence effect model. - Highlights: • Major advances in electronic structures and phonon properties of Ge{sub x}Si{sub 1−x} nanocrystals are discussed thoroughly. • Experimental and theoretical characterization related to size, composition, strain, temperature, and interface/surface are elucidated. • Low-frequency Raman spectra are specially described based on spatial coherence effect model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopic studies on diamond like carbon films synthesized by pulsed laser ablation

Hydrogen free Diamond like Carbon (DLC) thin films enriched with C-C sp{sup 3} bonding were grown on Si (111) substrates at laser pulse energies varying from 100 to 400 mJ (DLC-100, DLC-200, DLC-300, DLC-400), by Pulsed Laser Ablation (PLA) utilizing an Nd:YAG laser operating at fundamental wavelength. Structural, optical and morphological evolutions as a function of laser pulse energy were studied by micro Raman, UV-Vis spectroscopic studies and Atomic Force Microscopy (AFM), respectively. Raman spectra analysis provided critical clues for the variation in sp{sup 3} content and optical energy gap. The sp{sup 3} content was estimated using the FWHM of the G peak and found to be in the range of 62-69%. The trend of evolution of sp{sup 3} content matches well with the evolution of I{sub D}/I{sub G} ratio with pulse energy. UV-Vis absorption study of DLC films revealed the variation of optical energy gap with laser pulse energy (1.88 – 2.23 eV), which matches well with the evolution of G-Peak position of the Raman spectra. AFM study revealed that roughness, size and density of particulate in DLC films increase with laser pulse energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Constraint on the potassium content for the superconductivity of potassium-intercalated phenanthrene

Raman-scattering measurements were performed on K{sub x}phenanthrene (0 ⩽ x ⩽ 6.0) at room temperature. Three phases (x = 3.0, 3.5, and 4.0) are identified based on the obtained Raman spectra. Only the K{sub 3}phenanthrene phase is found to exhibit the superconducting transition at 5 K. The C–C stretching modes are observed to broaden and become disordered in K{sub x}phenanthrene with x = 2.0, 2.5, 6.0, indicating some molecular disorder in the metal intercalation process. This disorder is expected to influence the nonmetallic nature of these materials. The absence of metallic character in these nonsuperconducting phases is found from the calculated electronic structures based on the local density approximation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of disorder and isotopic substitution in the specific heat and Raman scattering in LuB{sub 12}

Precision measurements of the specific heat and spectral intensity I({omega}) of Raman scattering for Lu{sup N}B{sub 12} single crystal samples with various boron isotopes (N = 10, 11, nat) have been performed at low and intermediate temperatures. A boson peak in the low-frequency part of the I({omega}) spectrum has been observed for the first time for lutetium dodecaboride at liquid nitrogen temperatures. It has been shown that low-temperature anomalies in the specific heat, along with the features of Raman spectra, can be interpreted in terms of the transition to a cageglass state at T* = 50-70 K, which appears when Lu{sup 3+} ions are displaced from the centrosymmetric position in cavities of a rigid covalent boron sublattice towards the randomly located boron vacancies. The concentrations of various two-level systems that correspond to two types of vibrational clusters with correlation lengths of 12-15 and 18-22 A, respectively, have been estimated. The vibrational density of states of LuB{sub 12} has been calculated from Raman spectra in the model of soft atomic potentials. An approach has been proposed to explain the dielectrization of the properties of the YbB{sub 12} compound at T < T*, as well as the features of the formation of magnetic structures in RB{sub 12} antiferromagnets (R = Tb, Dy, Ho, Er, Tm) and the suppression of superconductivity in LuB{sub 12}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

1D coordination polymers with polychalcogenides as linkers between metal atoms

The reactions of zinc metal with elemental selenium and selenium/sulfur mixtures in liquid ammonia or methylamine under solvothermal conditions in closed glass ampoules at 50 °C lead within some days specifically to [Zn(NH{sub 3}){sub 2}Se{sub 4}]{sub n} (1), [Zn(MeNH{sub 2}){sub 2}Se{sub 4}]{sub n} (2), [Zn(NH{sub 3}){sub 2}Se{sub 2.23}S{sub 1.77}]{sub n} (3). From MnCl{sub 2}, Rb{sub 2}Se and excess Se in n-butylamine [Mn({sup n}BuNH{sub 2}){sub 4}Se{sub 6}]{sub n} (4) is obtained after prolonged reaction time at ambient temperature. The compounds are sensitive towards air and loss of NH{sub 3} or the amine ligands. The crystal structures were determined by single crystal diffraction at low temperatures. As a common structural feature, all compounds represent 1D coordination polymers with polychalcogenide chains as linkers between the metal atoms and consist of infinite [M–Ch{sub m}–]{sub n} chains (M=Zn, Mn; Ch{sub m}=Se{sub 4}, (S/Se){sub 4}, Se{sub 6}). The Zn central atoms in 1–3 have tetrahedral coordination with two amine ligands, the Mn atoms in 4 have octahedral coordination with four amine ligands and cis position of the two Se atoms. Raman spectra of 1–3 show the stretching mode vibrations of the Ch{sub 4} groups. The observation of S–S, S–Se, and Se–Se vibration bands in the spectrum of 3 indicates the presence of mixed S/Se polyanions. An optical band gap of 1.86(5) eV was determined for 2 by diffuse reflectance spectroscopy. - Graphical abstract: The reaction of Zn and Se in liquid methylamine yields dark red [Zn(NH{sub 2}CH{sub 3})Se{sub 4}], a 1D coordination polymer consisting of helical Zn–Se{sub 4}–Zn– chains. - Highlights: • A series of 1D coordination polymers consisting of metal amine complexes concatenated by polychalcogenide ions is presented. • Syntheses were performed as solvothermal reactions in liquid ammonia, liquid methylamine and n-butylamine. • Crystal structures are dominated by helices [M–Ch{sub m}]{sub n}. • Raman spectra show the presence of mixed S/Se polyanions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure induced phase transformation in U{sub 2}O(PO{sub 4}){sub 2}

The high pressure behavior of U{sub 2}O(PO{sub 4}){sub 2} has been investigated with the help of Raman scattering and X-ray diffraction measurements up to {approx}14 and 6.5 GPa, respectively. The observed changes in the Raman spectra as well as the X-ray diffraction patterns suggest that U{sub 2}O(PO{sub 4}){sub 2} undergoes a phase transition at {approx}6 GPa to a mixture of a disordered ambient pressure phase and a new high pressure phase. The new phase resembles the triclinic mixed-valence phase of uranium orthophosphate (U(UO{sub 2})(PO{sub 4}){sub 2}). On release of pressure the initial phase is not retrieved. - Graphical abstract: The high pressure behavior of U{sub 2}O(PO{sub 4}){sub 2} has been investigated with the help of Raman scattering and X-ray diffraction measurements up to {approx}14 and 6.5 GPa, respectively. The observed changes in the Raman spectra as well as the X-ray diffraction patterns suggest that U{sub 2}O(PO{sub 4}){sub 2} undergoes a phase transition at {approx}6 GPa to a mixture of a disordered ambient pressure phase and a new high pressure phase. The new phase resembles the triclinic mixed-valence phase of uranium orthophosphate (U(UO{sub 2})(PO{sub 4}){sub 2}). On release of pressure the initial phase is not retrieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial niobium dioxide thin films by reactive-biased target ion beam deposition

Epitaxial NbO{sub 2} thin films were synthesized on Al{sub 2}O{sub 3} (0001) substrates via reactive bias target ion beam deposition. X-ray diffraction and Raman spectra were used to confirm the tetragonal phase of pure NbO{sub 2}. Through XPS, it was found that there was a ∼1.3 nm thick Nb{sub 2}O{sub 5} layer on the surface and the bulk of the thin film was NbO{sub 2}. The epitaxial relationship between the NbO{sub 2} film and the substrate was determined. Electrical transport measurement was measured up to 400 K, and the conduction mechanism was discussed.

36 MATERIALS SCIENCE↗

Complete characterization by Raman spectroscopy of the structural properties of thin hydrogenated diamond-like carbon films exposed to rapid thermal annealing

We have demonstrated that multi-wavelength Raman and photoluminescence spectroscopies are sufficient to completely characterize the structural properties of ultra-thin hydrogenated diamond-like carbon (DLC:H) films subjected to rapid thermal annealing (RTA, 1 s up to 659 °C) and to resolve the structural differences between films grown by plasma-enhanced chemical vapor deposition, facing target sputtering and filtered cathodic vacuum arc with minute variations in values of mass density, hydrogen content, and sp³ fraction. In order to distinguish unequivocally between films prepared with different density, thickness, and RTA treatment, a new method for analysis of Raman spectra was invented. This newly developed analysis method consisted of plotting the position of the Raman G band of carbon versus its full width at half maximum. Moreover, we studied the passivation of non-radiative recombination centers during RTA by performing measurements of the increase in photoluminescence in conjunction with the analysis of DLC:H networks simulated by molecular dynamics. The results show that dangling bond passivation is primarily a consequence of thermally-induced sp² clustering rather than hydrogen diffusion in the film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Double resonant Raman scattering in nanographite films

Experimental results are presented on Raman scattering in graphite films produced by DC plasmaenhanced chemical vapor deposition from a methane-hydrogen gas mixture. Scanning electron and probe microscopy data show that, depending on substrate material and deposition time, the deposited film is either a mesoporous material consisting of graphite nanocrystallites with basal planes oriented perpendicular to the substrate surface or an atomically flat, nanometer-thick stack of graphene layers parallel to the substrate. A comparative Raman spectroscopy analysis is performed for film samples deposited on nickel and silicon substrates for 5 and 60 min, as well as for highly ordered graphite samples. The Raman spectra of the examined samples correspond to the double resonant scattering mechanism. The behavior of Raman peak position and intensity as functions of excitation wavelength suggests a high degree of structural order in the graphite films deposited on nickel for 5 min. The results obtained are used to show that the thickness of these films is 1.5 {+-} 0.5 nm.

36 MATERIALS SCIENCE↗

Unraveling the Correlation between Raman and Photoluminescence in Monolayer MoS 2 through Machine‐Learning Models

Abstract 2D transition metal dichalcogenides (TMDCs) with intense and tunable photoluminescence (PL) have opened up new opportunities for optoelectronic and photonic applications such as light‐emitting diodes, photodetectors, and single‐photon emitters. Among the standard characterization tools for 2D materials, Raman spectroscopy stands out as a fast and non‐destructive technique capable of probing material's crystallinity and perturbations such as doping and strain. However, a comprehensive understanding of the correlation between photoluminescence and Raman spectra in monolayer MoS 2 remains elusive due to its highly nonlinear nature. Here, the connections between PL signatures and Raman modes are systematically explored, providing comprehensive insights into the physical mechanisms correlating PL and Raman features. This study's analysis further disentangles the strain and doping contributions from the Raman spectra through machine‐learning models. First, a dense convolutional network (DenseNet) to predict PL maps by spatial Raman maps is deployed. Moreover, a gradient boosted trees model (XGBoost) with Shapley additive explanation (SHAP) to bridge the impact of individual Raman features in PL features is applied. Last, a support vector machine (SVM) to project PL features on Raman frequencies is adopted. This work may serve as a methodology for applying machine learning to characterizations of 2D materials.

Lu, Ang‐Yu↗