Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quadrupole”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A methodology to compute the critical current limit in Nb3Sn magnets

Numerous experiments have shown that the loads applied to Nb3Sn strands and cables can reduce their critical current. Experiments, performed on uniaxially loaded strands, allowed to define clear laws to describe the evolution of the critical surface as a function of the applied current, field, temperature and strain. It is, however, still unclear how these laws can be applied to superconducting magnets. The present paper proposes a methodology to estimate the critical current and temperature margin reduction on superconducting magnets due to stress on the superconducting material. The methodology is tested on the MQXF magnets, a quadrupole developed for the High Luminosity LHC project, and successfully validated by comparing computed strain with data from strain gauge measurements. Overall, results suggested that, because of the stresses arising in winding during assembly, cool-down and powering, the current limit of the magnet is lower than the expected short sample limit, and that the most critical region does not coincide with the peak field location.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Ferrimagnetism in EuFe 4 As 12 revealed by 153 Eu NMR and 75 As NQR measurements

Filled skutterudite compound EuFe 4 As 12 shows the highest magnetic ordering temperature of T C =154K among Eu-based skutterudite compounds, but its magnetic ground state has not been determined yet. In this study, we performed 153 Eu nuclear magnetic resonance (NMR) and 75 As nuclear quadrupole resonance (NQR) measurements on EuFe 4 As 12 to reveal its magnetic ground state as well as the physical properties from a microscopic point of view. From the temperature and magnetic field dependence of 153 Eu NMR spectrum in the magnetically ordered state, we found that the Eu ions are in Eu 2+ state with a nearly 7 μB corresponding to S=7/2 spins. Combined with the magnetization measurements, which show the reduced saturation moments of 4.5 μB/f.u., we determined the ground magnetic structure in EuFe 4 As 12 to be ferrimagnetic where the Eu 2+ 4f and the Fe 3d ordered moments are ferromagnetically aligned in each sublattice but the moments between the sublattices are antiferromagnetically aligned. We also found the local distortion at the Eu site from the cubic symmetry in the magnetically ordered state. The relationship between the rattling motion of Eu atoms and the local symmetry of the Eu ions is discussed. From the 75 As NQR nuclear spin-lattice relaxation time measurements as well as 153 Eu NMR measurements, we found that the 4f electrons of the Eu ions are well described by the local moment picture in both the magnetic and paramagnetic metallic states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Nanoscale heterogeneity induced by nonmagnetic Zn dopants in the quantum critical metal CeCoIn 5 : 115 In NQR/NMR and 59 Co NMR study

We report antiferromagnetism in a prototypical quantum critical metal CeCoIn 5 is known to be induced by slight substitutions of nonmagnetic Zn atoms for In. In nominally 7% Zn-substituted CeCoIn 5 , an antiferromagnetic (AFM) state coexists with heavy fermion superconductivity. Heterogeneity of the electronic states is investigated in Zn-doped CeCoIn 5 by means of nuclear quadrupole and magnetic resonances (NQR and NMR). Site-dependent NQR relaxation rates 1/T 1 indicate that the AFM state is locally nucleated around Zn substituents in the matrix of a heavy fermion state, and percolates through the bulk at the AFM transition temperature T N . At lower temperatures, an anisotropic superconducting (SC) gap below the SC transition temperature Tc, and the SC state permeates through the AFM regions via a SC proximity effect. Applying an external magnetic field induces a spin-flop transition near 5T, reducing the volume of the AFM regions. Consequently, a short-ranged inhomogeneous AFM state survives and coexists with a paramagnetic Fermi liquid state at high fields.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microscopic characterization of the magnetic properties of the itinerant antiferromagnet La 2 Ni 7 by La 139 NMR/NQR measurements

In this study, 139 La nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) measurements have been performed to investigate the magnetic properties of the itinerant magnet La 2 Ni 7 , which shows a series of antiferromagnetic (AFM) phase transitions at T N1 = 61 K, T N2 = 56 K, and T N3 = 42 K under zero magnetic field. Two distinct La NMR signals were observed due to the two crystallographically inequivalent La sites in La 2 Ni 7 (La1 and La2 in the La 2 Ni 4 and the LaNi 5 subunits of the La 2 Ni 7 unit cell, respectively). From the 139 La NQR spectrum in the AFM state below T N3 , the AFM state was revealed to be a commensurate state where Ni-ordered moments align along the crystalline c axis. Owing to the two different La sites, we were able to estimate the average values of the Ni-ordered moments (0.09 – 0.10 μB / Ni and 0.17 μB / Ni around La1 and La2, respectively) from 139 La NMR spectrum measurements in the AFM state below T N3 , suggesting a nonuniform distribution of the Ni-ordered moments in the AFM state. In contrast, a more uniform distribution of the Ni-ordered moments in the saturated paramagnetic state induced by the application of high magnetic fields is observed. The temperature dependence of the sublattice magnetization measured by the internal magnetic induction at the La2 site in the AFM state was reproduced by a local-moment model better than the self-consistent renormalization (SCR) theory for weak itinerant antiferromagnets. Given the small Ni-ordered moments in the magnetically ordered state, our results suggest that La 2 Ni 7 has characteristics of both itinerant nature and localized nature in its magnetism. With this in mind, it is noteworthy that the temperature dependence of nuclear spin-relaxation rates (1/T 1 ) in the paramagnetic state above T N1 measured at zero magnetic field can be explained qualitatively by both the SCR theory and the local-moment model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Coulomb excitation of 80 Sr and the limits of the 𝑁 ≈ 𝑍 ≈ 40 island of deformation

The region of 𝑁 ≈ 𝑍 ≈ 40 has long been associated with strongly deformed nuclear configurations. The presence of this strong deformation was recently confirmed through lifetime measurements in 𝑁 ≈ 𝑍 Sr and Zr nuclei. Theoretically, however, these nuclei present a challenge due to the vast valence space required to incorporate all necessary orbitals. Recent state-of-the-art predictions indicate a near axial prolate deformation for 𝑁 = 𝑍 and 𝑁 = 𝑍+2 nuclei between 𝑁 = 𝑍 = 36 and 𝑁 = 𝑍 = 40. In this work we investigate the shores of this island of deformation through a sub-barrier Coulomb excitation study of the 𝑁 = 𝑍+4 nucleus, 80 Sr . Extracting a spectroscopic quadrupole moment of 𝑄 𝑠 ⁡($2^+_1$)= $0.5^{+0.8}_{−0.9}$𝑒⁢b, we find that 80 Sr is inconsistent with significant axial prolate deformation with a significance of 1.5⁢𝜎. This result, albeit with a large uncertainty, indicates that the predicted region of strong prolate deformation around 𝑁 = 𝑍 = 40 is tightly constrained to the quartet of nuclei: 76,78 Sr and 78,80 Zr .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Field quality of the 4.5 m-long MQXFA pre-series magnets for the HL-LHC Upgrade as observed during magnet assembly

We report that the U.S. High-Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP) is developing MQXFA magnets, a series of 4.5 m long 150 mm aperture high-field Nb 3 Sn quadrupole magnets for the HL-LHC upgrade at CERN. Five pre-series magnets, MQXFA03 through MQXFA07, have been developed. During the magnet assembly stage, we perform magnetic measurements on the coil-pack sub-assembly and magnets after loading to track the field quality for two purposes. First, it serves as a quality assurance tool to check if the magnetic field quality is on track to meet the acceptance criteria. Magnetic measurements are used to understand if magnetic shims are needed to compensate low-order field errors and to meet the field quality targets. Second, the measurements during the assembly stage can also help understand the field quality, especially the geometric field errors, for Nb 3 Sn accelerator magnets. Here we summarize the measurement results of the pre-series MQXFA magnets, including the magnetic axis and twist angle. The results will provide useful feedback for the series production of Nb 3 Sn magnets and on the optimization of field quality of accelerator magnets based on the wind-and-react Nb 3 Sn technology.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Universal Approach to Rapid Amplified Plasmonic Sensing Using Helix Defect Phase Transition Polymers

Abstract Permittivity sensing is a critically important analytical tool for bioscience, environmental, and industrial applications. The response time for commonly used plasmonic permittivity sensors is fundamentally set by the reaction kinetics of chemically adsorbed analytes. In this work, the proposal is to overcome this limit by combining plasmonic sensors with phase transition materials possessing a rapid amplified electrostatic response such as quadrupole moment induced molecular helix reversal. As a proof‐of‐concept, rapid sensing of CO 2 on a phase transition polytetrafluoroethylene substrate and amplification of permittivity response in plasmonic Fabry–Perot sensor is shown. The demonstrated universal approach holds promise for a wide range of applications in fast, real time sensing and monitoring of biological and environmental processes.

Shugayev, Roman↗
DOE OSTI2023

Extremely Thin Perfect Absorber by Generalized Multipole Bianisotropic Effect

Symmetry breaking plays a crucial role in understanding the fundamental physics underlying numerous physical phenomena, including the electromagnetic response in resonators, giving rise to intriguing effects such as directional light scattering, supercavity lasing, and topologically protected states. Here, this work demonstrates that adding a small fraction of lossy metal (as low as 1 × 10 −6 in volume) to a lossless dielectric resonator breaks inversion symmetry (IS), thereby lifting its degeneracy, leading to a strong bianisotropic response. In the case of the metasurface composed of such resonators, this effect leads to unidirectional perfect absorption while maintaining nearly perfect reflection from the opposite direction. It has developed more general Onsager‐Casimir relations for the polarizabilities of particle arrays, taking into account the contributions of quadrupoles, which shows that bianisotropy is not solely due to dipoles, but also involves high‐order multipoles. The experimental validation demonstrates an extremely thin terahertz‐perfect absorber with a wavelength‐to‐thickness ratio of up to 25,000, where the material thickness is only 2% of the theoretical minimum thickness dictated by the fundamental limit. The findings can pave a new route to design devices for applications involving optical‐to‐heat conversion processes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Decomposition of Irganox 1010 in plastic bonded explosives

Abstract Degradation pathways of Irganox 1010 in aged plastic bonded explosive (PBX) 9501 were investigated using ultrahigh performance liquid chromatography coupled to quadrupole time of flight mass spectrometry (UHPLC‐QTOF). Using a targeted approach, a total of 44 Irganox 1010 decomposition products were discovered. These decomposition products were formed through hydrolysis, scission, and/or oxidation of Irganox 1010. The hydrolytic decomposition of Irganox is a straightforward process resulting in the cleavage of the ester group(s) while oxidation and scission are more complicated and can happen at multiple locations on the Irganox 1010 molecule. Moreover, due to the symmetric nature of Irganox 1010, multiple decomposition reactions can occur. Indeed some decomposition products exhibited hydrolysis, oxidation, and scission. In order to probe any trends in the aged PBX 9501 samples, principal component analysis (PCA) was implemented. The greatest chemical differences between the aged PBX samples was hydrolysis of the ester functional groups on Irganox 1010. Despite the negative connotations of hydrolysis, the Irganox 1010 decomposition products are still able to function as a radical scavenger in PBX 9501 as intended.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Large–scale asymmetry in galaxy spin directions: Analysis of galaxies with spectra in DES, SDSS, and DESI Legacy Survey

Multiple previous studies using several different probes have shown considerable evidence for the existence of cosmological–scale anisotropy and a Hubble–scale axis. One of the probes that show such evidence is the distribution of the directions toward which galaxies spin. The advantage of the analysis of the distribution of galaxy spin directions compared to the cosmic microwave background anisotropy is that the ratio of galaxy spin directions is a relative measurement, and therefore less sensitive to background contamination such as Milky Way obstruction. Another advantage is that many spiral galaxies have spectra, and therefore allow to analyze the location of such axis relative to Earth. This paper shows an analysis of the distribution of the spin directions of over 90K galaxies with spectra. That analysis is also compared to previous analyses using the Earth–based Sloan Digital Sky Survey, Panoramic Survey Telescope and Rapid Response System, and Dark Energy Spectroscopic Instrument Legacy Survey, as well as space–based data collected by Hubble Space Telescope. Finally, the results show very good agreement between the distribution patterns observed with the different telescopes. The dipole or quadrupole axes formed by the spin directions of the galaxies with spectra do not necessarily go directly through Earth.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Energy-resolved mass spectrometry as a tool for identification of lignin depolymerization products

Lignin is the largest source of bio-based aromatic compounds in nature, and its valorization is essential to the sustainability of lignocellulosic biorefining. Characterizing lignin-derived compounds remains challenging due to the heterogeneity of this biopolymer. Tandem mass spectrometry is a promising tool for lignin structural analytics, as fragmentation patterns of model compounds can be extrapolated to identify characteristic moieties in complex samples. This work extends previous resonance excitation type collision-induced dissociation (CID) methods that identified lignin oligomers containing β-Ο-4, β-5, and β-β bonds, to also identify characteristics of 5-5, β-1, and 4-Ο-5 dimers, enabled by quadrupole time-of-flight (QTOF) CID with energy-resolved mass spectrometry (ERMS). Overall, beam type ERMS offers in-depth structural information and could ultimately contribute to tools for high-throughput lignin dimer identification.

09 BIOMASS FUELS↗
DOE OSTI2020

Comparative study on the novel umami‐active peptides of the whole soybeans and the defatted soybeans fermented soy sauce

Abstract BACKGROUND Two kinds of soy sauce produced via fermentation of the whole soybeans and the defatted soybeans (soy sauce termed ‘SSS’ and ‘SSD’, respectively) were subjected to the treatment using aqueous ethanol solutions with high concentrations. Then tasty peptides were separated from SSS and SSD by sensory guided fractionation, using macroporous resin and reverse‐phase high‐performance liquid chromatography (RP‐HPLC), and identified by ultra‐performance liquid chromatography quadrupole time‐of‐flight tandem mass spectrometry (UPLC‐Q‐TOF‐MS/MS). Results The result showed that umami‐active fractions and ≤ 3 kDa peptides were mainly concentrated in the supernatants resulted from the treatment with 60% ethanol and the precipitates resulted from the treatment with 80% ethanol. The contents of ammonia nitrogen, non‐salt solids, bitter amino acids, amino acids in peptides and the proportion of ≤ 3 kDa peptides in SSS were higher than those in SSD. Sixteen and fourteen tasty peptides were separated from SSS and SSD, among them five dipeptides (γ‐Glu‐Glu, Glu‐Glu, γ‐Glu‐Cys, γ‐Glu‐Leu, Glu‐Leu and Ile‐Glu) with a glutamic acid residue were identified both in SSS and SSD, which have been reported as umami/kokumi‐active peptides in soy sauce. Several peptides identified from SSS (Thr‐Gly‐Cys, Gly‐Leu‐Glu, Val‐Glu‐Ala‐Leu and Gly‐Gly‐Gly‐Glu) and SSD (Asp‐Arg, Asp‐Ala‐Glu, Glu‐Val‐Cys and Gly‐Gly‐Gly‐Glu) are tasty and/or umami‐active peptides but have not been reported as tasty peptides in the past. Conclusion Most of the peptides separated from SSD and SSS could impart an umami‐enhancing effect on soy sauce, and the marginally more kokumi and bitterness hydrophobic peptides were found in SSS than SSD. © 2020 Society of Chemical Industry

Zhu, Xiping↗
DOE OSTI2021

Solid‐state nuclear magnetic resonance of spin‐9/2 nuclei 115 In and 209 Bi in functional inorganic complex oxides

Abstract Indium and bismuth are technologically important elements, in particular as oxides for optoelectronic applications. 115 In and 209 Bi are both I = 9/2 nuclei with high natural abundances and moderately high frequencies but large nuclear electric quadrupole moments. Leveraging the quadrupolar interaction as a measure of local symmetry and polyhedral distortions for these nuclei could provide powerful insights on a range of applied materials. However, the absence of reported nuclear magnetic resonance (NMR) parameters on these nuclei, particularly in oxides, hinders their use by the broader materials community. In this contribution, solid‐state 115 In and 209 Bi NMR of three recently discovered quaternary bismuth or indium oxides are reported, supported by density functional theory calculations, numerical simulations, diffraction and additional multinuclear ( 27 Al, 69,71 Ga, and 121 Sb) solid‐state NMR measurements. The compounds LiIn 2 SbO 6 , BiAlTeO 6 , and BiGaTeO 6 are measured without special equipment at 9.4 T, demonstrating that wideline techniques such as the QCPMG pulse sequence and frequency‐stepped acquisition can enable straightforward extraction of quadrupolar tensor information in I = 9/2 115 In and 209 Bi even in sites with large quadrupolar coupling constants. Relationships are described between the NMR observables and local site symmetry. These are amongst the first reports of the NMR parameters of 115 In, 121 Sb, and 209 Bi in oxides.

Griffith, Kent J.↗
DOE OSTI2021

Liquid Chromatography Mass Spectrometry study of eutectic bis(2,2-dinitropropyl) acetal/formal

This study is the first attempt to document methodology development undergone using liquid chromatography tandem quadrupole time of flight mass spectrometry (LC-QTOF) to investigate degradation products of eutectic bis(2,2-dinitropropyl) acetal/formal nitroplasticizer (called NP here). Method properties investigated are: desolvation temperature (°C) and spray voltage (V) of the electrospray ionization source, and the development of an acetone system rinse to prevent any residual contamination between sample injections. Details are given on why it is essential to investigate method optimization with changes shown in MS/MS analysis in addition to MS results. Trends in MS/MS analytic results reveal important relationships between baseline and aged materials. In addition to verification of previously proposed fragments, insights offered by this newly developed methodology will also identify new degradation products and shed light on the complexity of NP degradation chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Identification of 2,2-dinitropropanol, a Hydrolyzed Product of Aged Eutectic Bis(2,2-dinitropropyl) Acetal – Bis(2,2-dinitropropyl) Formal Mixture

Eutectic bis(2,2-dinitropropyl) acetal - bis(2,2-dinitropropyl) formal mixture, nitroplasticizer (herein called NP) has historically been produced by either the ter Meer or oxidative nitration synthesis process, wherein 2,2-dinitropropanol (DNPOH) is produced as an intermediate step in both processes. Therefore that DNPOH, could be present in NP either as a production or hydrolysis degradation product is worth investigation. Here, we synthesized DNPOH, validated the synthesis using NMR, and identified DNPOH in aged NP using liquid chromatography tandem time of flight – quadrupole mass spectrometry (LC-QTOF). Using these results, for the first time we positively identify that DNPOH is absent from NP after its production, but is present as a degradation product through hydrolysis from a thermo-chemical aging profile of NP. To hydrolyze NP, prerequisite is the presence of both water and acid. Despite the presence of water in NP, DNPOH is only generated in the late stage of the aging process, when acid concentration is sufficiently high. It has been previously shown both theoretically and experimentally that a primary step of NP degradation is HONO elimination followed by decomposition, wherein nitric acid, nitrous acid, and water are produced (NP→NP’+2HONO and 2HONO→NO+NO 2 +H 2 O). It is shown from this reaction series that water slows HONO decomposition and therefore in small quantities, 100 s of ppm, water actually stabilizes NP against hydrolysis by equilibrium and reducing acidity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Installation protocol for charge transfer dissociation mass spectrometry on ion trapping mass spectrometers

Abstract Rationale Charge transfer dissociation (CTD) is a novel fragmentation technique that demonstrates enhanced structural characterization for a wide variety of molecules compared to standard fragmentation techniques like collision‐induced dissociation (CID). Alternative fragmentation techniques, such as electron transfer dissociation, electron capture dissociation, and ultraviolet photodissociation, also overcome many of the shortfalls of CID, but none of them are a silver bullet that can adequately characterize a wide variety of structures and charge states of target compounds. Given the diversity of structural classes and their occasional obstinance towards certain activation techniques, alternative fragmentation techniques are required that rely on novel or alternative modes of activation. Methods Herein, we present a step‐by‐step protocol for the installation of CTD on a quadrupole ion trap mass spectrometer and best practices for optimizing the signal‐to‐noise ratio and acquisition times for CTD mass spectra. Results In addition to two CTD installations in the Jackson laboratory, CTD has also been installed, and is currently in operation, on two 3D ion trap mass spectrometers in France: one in the laboratory of Dr. David Ropartz and Dr. Hélène Rogneaux at INRAE in Nantes, and the other in the laboratory of Dr. Jean‐Yves Salpin at Université d'Évry Val‐d'Essonne, part of the Paris‐Saclay University system. Conclusions Here, we provide a visual protocol to help others accomplish the instrument modification.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

The Importance of Decarbonylation Mechanisms in the Atomic Layer Deposition of High-Quality Ru Films by Zero-Oxidation State Ru(DMBD)(CO) 3

Achieving facile nucleation of noble metal films through atomic layer deposition (ALD) is extremely challenging. To this end, η 4 -2,3-dimethylbutadiene ruthenium tricarbonyl (Ru(DMBD)(CO) 3 ), a zero-valent complex, has recently been reported to achieve good nucleation by ALD at relatively low temperatures and mild reaction conditions. Here, we study the growth mechanism of this precursor by in situ quartz-crystal microbalance and quadrupole mass spectrometry during Ru ALD, complemented by ex situ film characterization and kinetic modeling. These studies reveal that Ru(DMBD)(CO) 3 produces high-quality Ru films with excellent nucleation properties. This results in smooth, coalesced films even at low film thicknesses, all important traits for device applications. However, Ru deposition follows a kinetically limited decarbonylation reaction scheme, akin to typical CVD processes, with a strong dependence on both temperature and reaction timescale. The non-self-limiting nature of the kinetically driven mechanism presents both challenges for ALD implementation and opportunities for process tuning. By surveying reports of similar precursors, we suggest that the findings can be generalized to the broader class of zero-oxidation state carbonyl-based precursors used in thermal ALD, with insight into the design of effective saturation studies.

chemical vapor deposition↗
DOE OSTI2024

Higher-order tails and RG flows due to scattering of gravitational radiation from binary inspirals

Abstract We establish and develop a novel methodology to treat higher-order non-linear effects of gravitational radiation that is scattered from binary inspirals, which employs modern scattering-amplitudes methods on the effective picture of the binary as a composite particle. We spell out our procedure to study such effects: assembling tree amplitudes via generalized-unitarity methods and employing the closed-time-path formalism to derive the causal effective actions, which encompass the full conservative and dissipative dynamics. We push through to a new state of the art for these higher-order effects, up to the third subleading tail effect, at order$$ {G}_N^5 $$ G N 5 and the 5-loop level, which corresponds to the 8.5PN order. We formulate the consequent dissipated energy for these higher-order corrections, and carry out a renormalization analysis, where we uncover new subleading RG flow of the quadrupole coupling. For all higher-order tail effects we find perfect agreement with partial observable results in PN and self-force theories, where available.

Physics↗