Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “QUARTZ”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Quartz-enhanced photoacoustic spectroscopy sensor for ethylene detection with a 3.32 μm distributed feedback laser diode

An antimonide distributed feedback quantum wells diode laser operating at 3.32 μm at near room temperature in the continuous wave regime has been used to perform ethylene detection based on quartz enhanced photoacoustic spectroscopy. An absorption line centered at 3007.52 cm{sup −1} was investigated and a normalized noise equivalent absorption coefficient (1σ) of 3.09 10{sup −7} cm{sup −1} W Hz{sup −1/2} was obtained. The linearity and the stability of the detection have been evaluated. Biological samples’ respiration has been measured to validate the feasibility of the detection setup in an agronomic environment, especially on ripening apples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Short-lived species detection of nitrous acid by external-cavity quantum cascade laser based quartz-enhanced photoacoustic absorption spectroscopy

Spectroscopic detection of short-lived gaseous nitrous acid (HONO) at 1254.85 cm{sup −1} was realized by off-beam coupled quartz-enhanced photoacoustic spectroscopy (QEPAS) in conjunction with an external cavity quantum cascade lasers (EC-QCL). High sensitivity monitoring of HONO was performed within a very small gas-sample volume (of ∼40 mm{sup 3}) allowing a significant reduction (of about 4 orders of magnitude) of air sampling residence time which is highly desired for accurate quantification of chemically reactive short-lived species. Calibration of the developed QEPAS-based HONO sensor was carried out by means of lab-generated HONO samples whose concentrations were determined by direct absorption spectroscopy involving a ∼109.5 m multipass cell and a distributed feedback QCL. A minimum detection limit (MDL) of 66 ppbv (1 σ) HONO was achieved at 70 mbar using a laser output power of 50 mW and 1 s integration time, which corresponded to a normalized noise equivalent absorption coefficient of 3.6 × 10{sup −8 }cm{sup −1} W/Hz{sup 1/2}. This MDL was down to 7 ppbv at the optimal integration time of 150 s. The corresponding 1σ minimum detected absorption coefficient is ∼1.1 × 10{sup −7 }cm{sup −1} (MDL ∼ 3 ppbv) in 1 s and ∼1.1 × 10{sup −8 }cm{sup −1} (MDL ∼ 330 pptv) in 150 s, respectively, with 1 W laser power.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Room temperature analysis of dielectric function of ZnO-based thin film on fused quartz substrate

A set of sample consist of pure ZnO and Cu-doped ZnO film were grown on fused-quartz substrates using pulsed laser deposition (PLD) technique. Here, we report room temperature spectroscopic ellipsometry analysis (covering energy range of 0.5 to 6.3 eV) of pure ZnO film and Cu doped ZnO film at 8 in at. %. The thickness of pure ZnO and Cu-doped ZnO film using in this study is about 350 nm. To extract the dielectric function of ZnO thin film, multilayer modeling is performed which takes into account reflections at each interface through Fresnel coefficients. This method based on Drude-Lorentz models that connect with Kramers-Kronig relations. The best fitting of Ψ (amplitude ratio) and Δ (phase difference) taken by SE measurement are obtained reasonably well by mean the universal fitting of three different photon incident angles. The imaginary part of dielectric function (ε{sub 2}) show the broad peak at around 3.3 eV assigned as combination of optical band energy edge with excitonic states. The exitonic states could not be observed clearly in this stage. The evolution of extracted dielectric function is observable by introducing 8% Cu as indicated by decreasing of excitonic intensity. This result indicates the screening of excitonic state. This study will bring us to have a good undestanding for the role of Cu impurities for ZnO thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Communication: Hole localization in Al-doped quartz SiO{sub 2} within ab initio hybrid-functional DFT

We investigate the long-standing problem of hole localization at the Al impurity in quartz SiO{sub 2}, using a relatively recent DFT hybrid-functional method in which the exchange fraction is obtained ab initio, based on an analogy with the static many-body COHSEX approximation to the electron self-energy. As the amount of the admixed exact exchange in hybrid functionals has been shown to be determinant for properly capturing the hole localization, this problem constitutes a prototypical benchmark for the accuracy of the method, allowing one to assess to what extent self-interaction effects are avoided. We obtain good results in terms of description of the charge localization and structural distortion around the Al center, improving with respect to the more popular B3LYP hybrid-functional approach. We also discuss the accuracy of computed hyperfine parameters, by comparison with previous calculations based on other self-interaction-free methods, as well as experimental values. We discuss and rationalize the limitations of our approach in computing defect-related excitation energies in low-dielectric-constant insulators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of laser shock experiments on precompressed samples using a quartz reference and application to warm dense hydrogen and helium

Megabar (1 Mbar = 100 GPa) laser shocks on precompressed samples allow reaching unprecedented high densities and moderately high ~10 3 –10 4 K temperatures. We describe in this paper a complete analysis framework for the velocimetry (VISAR) and pyrometry (SOP) data produced in these experiments. Since the precompression increases the initial density of both the sample of interest and the quartz reference for pressure-density, reflectivity, and temperature measurements, we describe analytical corrections based on available experimental data on warm dense silica and density-functional-theory based molecular dynamics computer simulations. Finally, using our improved analysis framework, we report a re-analysis of previously published data on warm dense hydrogen and helium, compare the newly inferred pressure, density, and temperature data with most advanced equation of state models and provide updated reflectivity values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic motion of resonantly vibrating quartz crystal visualized by time-resolved X-ray diffraction

Transient atomic displacements during a resonant thickness-shear vibration of AT-cut α-quartz are revealed by time-resolved X-ray diffraction under an alternating electric field. The lattice strain resonantly amplified by the alternating electric field is ∼10{sup 4} times larger than that induced by a static electric field. The resonantly amplified lattice strain is achieved by fast displacements of oxygen anions and collateral resilient deformation of Si−O−Si angles bridging rigid SiO{sub 4} tetrahedra, which efficiently transduce electric energy into elastic energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable hard X-ray spectrometer utilizing asymmetric planes of a quartz transmission crystal

A Cauchois type hard x-ray spectrometer was developed that utilizes the (301) diffraction planes at an asymmetric angle of 23.51° to the normal to the surface of a cylindrically curved quartz transmission crystal. The energy coverage is tunable by rotating the crystal and the detector arm, and spectra were recorded in the 8 keV to 20 keV range with greater than 2000 resolving power. The high resolution results from low aberrations enabled by the nearly perpendicular angle of the diffracted rays with the back surface of the crystal. By using other asymmetric planes of the same crystal and rotating to selected angles, the spectrometer can operate with high resolution up to 50 keV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Scanning thermal microscopy based on a quartz tuning fork and a micro-thermocouple in active mode (2ω method)

A novel probe for scanning thermal microscope using a micro-thermocouple probe placed on a Quartz Tuning Fork (QTF) is presented. Instead of using an external deflection with a cantilever beam for contact detection, an original combination of piezoelectric resonator and thermal probe is employed. Due to a non-contact photothermal excitation principle, the high quality factor of the QTF allows the probe-to-surface contact detection. Topographic and thermal scanning images obtained on a specific sample points out the interest of our system as an alternative to cantilevered resistive probe systems which are the most spread.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Discrete conical emission rings observed upon filamentation of a femtosecond laser pulse in quartz

Supercontinuum emission observed upon filamentation of transform-limited collimated femtosecond laser pulses in a transparent condensed medium (fused KU-1 quartz) is studied experimentally and numerically. The splitting of diverging conical supercontinuum emission into discrete rings was observed with increasing the pulse energy. (special issue devoted to the 80th birthday of S.A. Akhmanov)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New functional capabilities of quartz for laser parameter measurements

This paper presents novel pyroelectric sensor design concepts for laser output measurements using a pyroelectric response induced in quartz. The proposed sensor design strategy relies on the relationship between the electric field configuration in a thermodynamically nonequilibrium crystal and the purpose-designed electrode geometry for light flux measurements. We describe various classes of pyroelectric sensors based on polarisation effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Annealing of induced absorption in quartz glasses by ArF laser radiation

Annealing of individual bands of electron-beam-induced absorption (IA) in the region of 150 - 400 nm in KS-4V, KU-1, and Corning 7980 (ArF Grade) quartz glasses by ArF laser radiation is studied. It is shown that the phototransformation of the IA spectra occurs mainly due to a significant decrease in the amplitudes of bands at {lambda} = 183.5, 213, and 260 nm. The role played by interstitial oxygen, hydrogen, and chlorine in the formation and relaxation of glass defects is considered. (effects of laser radiation on matter. laser plasma)

36 MATERIALS SCIENCE↗

Interpreting In-Situ X-ray Diffraction Data from High Pressure Deformation Experiments using Elastic Plastic Self Consistent Models: an Example using Quartz

We present synchrotron x-ray diffraction observations from a deformation experiment on fine-grained polycrystalline quartz using the newly developed deformation DIA apparatus. During deformation experiments we were able to observe the elastic strain of the (100), (101) and (112) lattice reflections. The elastic strains are typically converted into stresses and interpreted in terms of the differential stress supported by the specimen. Consistently with results from others obtained using this technique to deform monomineralic polycrystals, our results show substantial variations in stress levels between grain populations. Rather than averaging the lattice reflection stresses or choosing a single reflection to determine the macroscopic stress supported by the specimen, we explore the use of elastic-plastic self-consistent (EPSC) models. We are able to match the measured differential elastic lattice strains with an EPSC model in which basal and prism {l_angle}a{r_angle} slips are activated. An interesting outcome of the EPSC model is the prediction that the macroscopic stress experienced by the sample should be greater than the stress calculated from any of the reflections that we observed. This observation serves as a caution against using reflection stresses as a proxy for the macroscopic stress in in situ deformation experiments.

43 PARTICLE ACCELERATORS↗

Multipole effects in atom-surface interactions: A theoretical study with an application to He-{alpha}-quartz

We address some practically important and experimentally relevant questions concerning atom-surface interactions. For example, the quadrupole interaction of an atom with a dielectric macroscopic surface is obtained with full allowance for retardation and in closed form, valid for an arbitrary atom-surface distance. We also explore the relevance of higher-order multipole effects in atom-surface interactions, and we find that details in the dielectric response function of the surface material have to be resolved in order to accurately calculate the atom-surface potential. They lead to important effects at an intermediate range which cannot be explained by either short-range or long-range asymptotics. A numerical example (helium interacting with {alpha}-quartz) is included in order to illustrate this aspect.

74 ATOMIC AND MOLECULAR PHYSICS↗

Spectral and temporal characterization of a fused-quartz-microresonator optical frequency comb

We report on the fabrication of high-Q, fused-quartz microresonators and the parametric generation of a frequency comb with 36-GHz line spacing using them. We have characterized the intrinsic stability of the comb in both the time and frequency domains to assess its suitability for future precision metrology applications. Intensity autocorrelation measurements and line-by-line comb control reveal near-transform-limited picosecond pulse trains that are associated with good relative phase and amplitude stability of the comb lines. The comb's 36-GHz line spacing can be readily photodetected, which enables measurements of its intrinsic and absolute phase fluctuations.

47 OTHER INSTRUMENTATION↗

Vitreous silica formation within shear bands in a dynamically compacted granular crystalline α‐quartz

A shear band is a heterogeneous, narrow seam within a solid material whose formation is caused by intense localized shearing when a sufficiently large amount of deformation occurs. If that deformation occurs at a sufficiently rapid rate, with operative friction, then co‐located ephemeral heating will occur in the shear band. In this study, shear bands were produced from dynamic shear‐induced compaction of a granular form of crystalline α‐quartz (SiO 2 ). The produced shear bands were approximately 25‐µm thick and were examined with scanning electron microscopy/electron backscatter diffraction, transmission electron microscopy, Raman spectroscopy, and nanoindentation. Further, they were found to contain a mixture of vitreous silica and small‐sized crystallites. This finding is significant because the presence of the vitreous silica within the shear band is a postmortem indicator that the localized temperature had reached or exceeded the melting temperature (∼1723°C) of crystalline SiO 2 during the rapid shear and compaction and then sufficiently rapid cooling quenched in that vitreous state.

36 MATERIALS SCIENCE↗

Preparation of TiO{sub 2} thin films on the inner surface of a quartz tube using atmospheric-pressure microplasma

Titanium dioxide (TiO{sub 2}) thin films were prepared on the inner surface of a quartz tube, with inner and outer diameters of 1 and 3 mm, respectively, using plasma-enhanced chemical vapor deposition with titanium tetraisopropoxide and oxygen (O{sub 2}) as reactants and helium as the carrier gas at atmospheric pressure. A microplasma was generated inside the tube by rf (13.56 MHz) excitation using externally attached parallel-plate electrodes. The characteristics of the deposited films were examined by scanning electron microscopy, x-ray photoelectron spectroscopy, and x-ray diffraction. A typical as-deposited film had an amorphous structure with a smooth surface and was transparent. With increasing O{sub 2} concentration in the plasma gas phase, the deposited film surface was covered with a large number of TiO{sub 2} nanoparticles. However, the deposited films were a mixture of TiO{sub 2} and amorphous carbon and showed rough surface in the absence of O{sub 2} in the source gas. The effects of the O{sub 2} concentration in the plasma gas on the characteristics of the deposited TiO{sub 2} films are discussed on the basis of the analysis of the gas species generated in the plasma using optical emission spectroscopy.

36 MATERIALS SCIENCE↗

In-situ etch rate study of Hf{sub x}La{sub y}O{sub z} in Cl{sub 2}/BCl{sub 3} plasmas using the quartz crystal microbalance

The etch rate of Hf{sub x}La{sub y}O{sub z} films in Cl{sub 2}/BCl{sub 3} plasmas was measured in-situ in an inductively coupled plasma reactor using a quartz crystal microbalance and corroborated by cross-sectional SEM measurements. The etch rate depended on the ion energy as well as the plasma chemistry. In contrast to other Hf-based ternary oxides, the etch rate of Hf{sub x}La{sub y}O{sub z} films was higher in Cl{sub 2} than in BCl{sub 3}. In the etching of Hf{sub 0.25}La{sub 0.12}O{sub 0.63}, Hf appeared to be preferentially removed in Cl{sub 2} plasmas, per surface compositional analysis by x-ray photoelectron spectroscopy and the detection of HfCl{sub 3} generation in mass spectroscopy. These findings were consistent with the higher etch rate of Hf{sub 0.25}La{sub 0.12}O{sub 0.63} than that of La{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

Low-Dispersion Multimode Fibers with a Core Made of Fluorine-Doped Quartz Glass

The causes of the occurrence and the method of the elimination of defects of non-bridging oxygen in multimode fluorosilicate optical fibers prepared by the modified method of chemical vapor deposition are considered. The solution is the use of support tubes obtained by quartz surfacing in a hydrogen atmosphere. In this case, there is no absorption band in a range of 630 nm caused by nonbridging oxygen in the spectrum of optical losses of gradient fluorosilicate optical fibers of W-type. Attenuation in a visible spectrum range is mainly determined by the level of Rayleigh scattering and the mode dispersions at a wavelength of 342 and 683 nm are 1.2 ± 0.1 and 0.7 ± 0.2 ps/m, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗