Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PrIMe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Lunar Surface Missions for Resource Reconnaissance: NASA's PRIME-1 and VIPER

In 2019 NASA announced it would return to the Moon where it would seek to establish a sustainable lunar presence. In Situ Resource Utilization (ISRU) is a critical part of the infrastructure needed to sustain and grow human surface exploration. NASA further codified its ISRU intentions with the release of the Moon to Mars objectives in 2022, which calls out specific infrastructure goals, and in the release of the Architecture Definition Document in 2023. While there are a variety of resources that are of interest, including oxygen from regolith minerals, water is a game changing resource for in-situ consumable and propellant production. NASA’s intention of targeting of the lunar polar region for Artemis is, in part due to the potential of water resources there.

Lunar↗
DOE OSTI2021

Creep Behavior of a High-$\gamma^{\prime}$ Ni-Based Superalloy Fabricated via Electron Beam Melting

Additive manufacturing enables the fabrication of complex engineering components previously inaccessible through traditional processes. Nickel-base superalloys with large γ' volume fraction are typically considered non-weldable and therefore exhibit a propensity for cracking during the fusion process. These crack-prone materials, however, are of great importance in gas turbine engines due to their excellent high temperature creep resistance. In this study we investigate the creep behavior of IN738LC produced by the electron beam melting process. Here, we find that with appropriate post-build heat treatment the creep response of material oriented in the build direction exhibits deformation and rupture behavior comparable to that of conventionally cast IN738 & IN738LC. In the transverse direction properties fall below the expected cast behavior, however, we argue this is likely due to differences in grain scale and crystallographic texture. It may be possible to coarsen the grain morphology with appropriate process-parameter optimization in order to reduce the severity of intergranular fracture in the transverse direction. These results illustrate that high temperature properties exhibited by additively manufactured IN738LC are suitable for the hot section of gas turbine engines.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Minor Elements and Solidification Cracking During Laser Powder-Bed Fusion of a High $\gamma ^{\prime }$ CoNi-Base Superalloy

Here, the cracking behavior of a high γ' volume fraction CoNi-base superalloy fabricated via laser powder bed fusion (LPBF) is studied in relation to the content of carbon and boron. Severe cracking occurred with the increase in boron content from 0.08 to 0.16 at. pct (0.015 to 0.029 wt pct), while compositions with 0.1 to 0.36 at. pct C (0.02 to 0.076 wt pct) and 0.08 at. pct B exhibited minimal cracking. Assessment of cracks in the high-boron composition shows a variation in crack density with printing parameters, and alignment of the cracks with the build direction. Scanning electron microscopy (SEM) of the crack surfaces shows evidence of a solidification cracking mode. Differential thermal analysis (DTA) reveals a decreased incipient melting temperature for the high-boron composition, and atom probe tomography (APT) is used to measure the enrichment at grain boundaries, revealing distinct boron segregation. Scheil-Gulliver solidification simulations for the different C and B levels are consistent with the incipient melting behavior observed with DTA. Evaluation of the solidification cracking susceptibility from the simulations allow for comparison of the CoNi alloy behavior to Ni-base superalloys studied for LPBF fabrication and displays how such metrics may aid in the design of new precipitation-strengthened superalloys for additive manufacturing (AM).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microstructure Evolution of a Multimodal Gamma-Prime Ni-Based Superalloy Characterized by In Situ Diffraction

The relationship between the evolution of microstructure, deformation micromechanisms and mechanical properties is difficult to establish in multimodal size distribution $_γ$$'$ superalloys, as the microstructure evolves with both temperature and time, and multiple strengthening mechanisms across each size distribution contribute to mechanical performance. In situ X-ray scattering can offer unparalleled insight regarding microstructure evolution at the temperatures and stresses of importance to gas-turbine applications; however, in situ X-ray diffraction has not been applied to the study of multimodal $_γ$$'$ distribution superalloys. Herein, lattice parameter evolution of secondary and tertiary $_γ$$'$ precipitates in a representative superalloy, Nimonic 115, is determined between 750 °C and 950 °C and correlated to room-temperature SEM and microhardness values. A large positive lattice parameter misfit of secondary $_γ$$'$ induces precipitate splitting, and the tertiary $_γ$$'$ goes into dissolution at ~ 800 °C, but with little apparent change in hardness values. The volume fraction of $_γ$$'$ decreases above 900 °C and precipitate-matrix coherency is lost, and there is a corresponding decrease in microhardness values. Importantly, the diffraction analysis demonstrates the capability to determine critical microstructural parameters of both precipitate size distributions in situ, representing an additional tool for determining microstructure-mechanical property relationships of multimodal superalloys.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Renal Denervation: Is It Ready for Prime Time?

Purpose of Review: Interventional cardiology and in particular the field of renal denervation is subject to constant change. This review provides an up to date overview of renal denervation trials and an outlook on what to expect in the future. Recent Findings: After the sham-controlled SYMPLICITY HTN-3 trial dampened the euphoria following early renal denervation trials, the recently published results of the sham-controlled SPYRAL HTN and RADIANCE HTN trials provided proof-of-principle for the blood pressure-lowering efficacy of renal denervation. However, these studies underline the major issue of patients’ non-adherence to antihypertensive medication as well as the need for reliable patient- and procedure-related predictors of response. Summary: The second generation of sham-controlled renal denervation trials provided proof of principle for the blood pressure-lowering efficacy of RDN. However, larger trials have to assess long-term safety and efficacy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2017

Lattice parameter misfit evolution during creep of a cobalt-based superalloy single crystal with cuboidal and rafted gamma-prime microstructures

A [h00] oriented Co-based superalloy single crystal was crept under tension at 940 °C=100 MPa, resulting in a P-type raft morphology with extensive particle coalescence along the [h00] loading direction. However, particle coalescence was also observed in two perpendicular directions on the (h00) plane, normal to the loading axis. Tensile creep experiments were performed with in-situ neutron diffraction at 800 °C=500 MPa on this initially rafted $\gamma$ microstructure, and for comparison at (i) 900 °C=260 MPa, and at (ii) 750 °C=875 MPa, both with initially cuboidal $\gamma$ microstructures. The alloy was shown to exhibit a positive lattice parameter misfit, and during the first hour of creep at 900 °C=260 MPa, the lattice parameter evolution indicated changes in phase composition associated with $\gamma$ dissolution as the alloy achieved phase equilibrium at 900 °C. For all three in-situ creep measurements, there was a significant divergence of the $\gamma$ and g lattice parameters as creep proceeded. The lattice parameter misfit values between the precipitates and the matrix approached their unconstrained values during creep, and were notably large compared to those of Ni-based superalloys. This is indicative of a loss of coherency at the precipitate/matrix interfaces. Such a loss of coherency at the precipitate/matrix interfaces will likely degrade certain mechanical properties such as fatigue resistance, as has been shown for the Ni-based superalloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Single High-Dose Radiation Enhances Dendritic Cell Homing and T Cell Priming by Promoting Reactive Oxygen Species-Induced Cytoskeletal Reorganization

Radiation therapy (RT) affects tumor-infiltrating immune cells, cooperatively driving tumor growth inhibition. However, there is still no absolute consensus on whether the homing ability of dendritic cells (DCs) is affected by direct x-ray irradiation. Most importantly, the underlying mechanisms are poorly understood.

62 RADIOLOGY AND NUCLEAR MEDICINE↗