Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

The solid-electrolyte interphase (SEI) is pivotal in stabilizing lithium metal anodes for rechargeable batteries. However, the SEI is constantly reforming and consuming electrolyte with cycling. The rational design of a stable SEI is plagued by the failure to control its structure and stability. In this article, we report a molecular-level SEI design using a reactive polymer composite, which effectively suppresses electrolyte consumption in the formation and maintenance of the SEI. The SEI layer consists of a polymeric lithium salt, lithium fluoride nanoparticles, and graphene oxide sheets, as evidenced by cryo-TEM, AFM, and surface-sensitive spectroscopies. This structure is different from that of a conventional electrolyte-derived SEI and has excellent passivation properties, homogeneity, and mechanical strength. The use of the polymer-inorganic SEI enables high-efficiency Li deposition and stable cycling of 4V Li|LiNi 0.5 Co 0.2 Mn 0.3 O 2 cells under lean electrolyte, limited Li excess, and high capacity conditions. The same approach was also applied to design stable SEI layers for sodium and zinc anodes.

25 ENERGY STORAGE↗
DOE OSTI2014

Kinetically constrained ring-polymer molecular dynamics for non-adiabatic chemical reactions

We extend ring-polymer molecular dynamics (RPMD) to allow for the direct simulation of general, electronically non-adiabatic chemical processes. The kinetically constrained (KC) RPMD method uses the imaginary-time path-integral representation in the set of nuclear coordinates and electronic states to provide continuous equations of motion that describe the quantized, electronically non-adiabatic dynamics of the system. KC-RPMD preserves the favorable properties of the usual RPMD formulation in the position representation, including rigorous detailed balance, time-reversal symmetry, and invariance of reaction rate calculations to the choice of dividing surface. However, the new method overcomes significant shortcomings of position-representation RPMD by enabling the description of non-adiabatic transitions between states associated with general, many-electron wavefunctions and by accurately describing deep-tunneling processes across asymmetric barriers. We demonstrate that KC-RPMD yields excellent numerical results for a range of model systems, including a simple avoided-crossing reaction and condensed-phase electron-transfer reactions across multiple regimes for the electronic coupling and thermodynamic driving force.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Ring-polymer molecular dynamics: Rate coefficient calculations for energetically symmetric (near thermoneutral) insertion reactions (X + H{sub 2}) → HX + H(X = C({sup 1}D), S({sup 1}D))

Following our previous study of prototypical insertion reactions of energetically asymmetric type with the RPMD (Ring-Polymer Molecular Dynamics) method [Y. Li, Y. Suleimanov, and H. Guo, J. Phys. Chem. Lett. 5, 700 (2014)], we extend it to two other prototypical insertion reactions with much less exothermicity (near thermoneutral), namely, X + H{sub 2} → HX + H where X = C({sup 1}D), S({sup 1}D), in order to assess the accuracy of this method for calculating thermal rate coefficients for this class of reactions. For both chemical reactions, RPMD displays remarkable accuracy and agreement with the previous quantum dynamic results that make it encouraging for the future application of the RPMD to other barrier-less, complex-forming reactions involving polyatomic reactants with any exothermicity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

A temperature-dependent coarse-grained model for the thermoresponsive polymer poly(N-isopropylacrylamide)

A coarse-grained (CG) model is developed for the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM), using a hybrid top-down and bottom-up approach. Nonbonded parameters are fit to experimental thermodynamic data following the procedures of the SDK (Shinoda, DeVane, and Klein) CG force field, with minor adjustments to provide better agreement with radial distribution functions from atomistic simulations. Bonded parameters are fit to probability distributions from atomistic simulations using multi-centered Gaussian-based potentials. The temperature-dependent potentials derived for the PNIPAM CG model in this work properly capture the coil–globule transition of PNIPAM single chains and yield a chain-length dependence consistent with atomistic simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Accelerating ring-polymer molecular dynamics with parallel-replica dynamics

Nuclear quantum effects are important for systems containing light elements, and the effects are more prominent in the low temperature regime where the dynamics also becomes sluggish. We show that parallel replica (ParRep) dynamics, an accelerated molecular dynamics approach for infrequent-event systems, can be effectively combined with ring-polymer molecular dynamics, a semiclassical trajectory approach that gives a good approximation to zero-point and tunneling effects in activated escape processes. The resulting RP-ParRep method is a powerful tool for reaching long time scales in complex infrequent-event systems where quantum dynamics are important. Two illustrative examples, symmetric Eckart barrier crossing and interstitial helium diffusion in Fe and Fe–Cr alloy, are presented to demonstrate the accuracy and long-time scale capability of this approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An Analysis of the Impact of Particle Growth on Transport Losses in Polymer-Electrolyte Fuel Cells

Voltage cycling causes catalyst nanoparticles in polymer-electrolyte fuel cells to grow. The concomitant loss of interfacial area results in larger kinetic, transport, and possibly ohmic overpotentials. This paper uses recently published experimental data and mathematical models to investigate the evolutions of transport and ohmic resistances to platinum nanoparticles located on the surface and inside the micropores of carbon black supports. Resistance to oxygen transport rises as surface area declines primarily because the flux to each remaining larger platinum particle increases. The path lengths governing oxygen diffusion to surface and buried platinum sites also increase as nanoparticles grow. Platinum nanoparticles on the surface become relatively less favorable as voltage cycling proceeds because they grow faster than platinum in micropores. Because voltage cycling causes total interfacial area to decline, and the fraction located inside micropores to increase, nanoscale ohmic losses increase as a catalyst layer decays. The practical importance of this effect is difficult to discern because proton conductivity in carbon micropores is not well characterized.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Electrically switchable metallic polymer metasurface device with gel polymer electrolyte

Abstract We present an electrically switchable, compact metasurface device based on the metallic polymer PEDOT:PSS in combination with a gel polymer electrolyte. Applying square-wave voltages, we can reversibly switch the PEDOT:PSS from dielectric to metallic. Using this concept, we demonstrate a compact, standalone, and CMOS compatible metadevice. It allows for electrically controlled ON and OFF switching of plasmonic resonances in the 2–3 µm wavelength range, as well as electrically controlled beam switching at angles up to 10°. Furthermore, switching frequencies of up to 10 Hz, with oxidation times as fast as 42 ms and reduction times of 57 ms, are demonstrated. Our work provides the basis towards solid state switchable metasurfaces, ultimately leading to submicrometer-pixel spatial light modulators and hence switchable holographic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Comparison of Single-Ion Conducting Polymer Gel Electrolytes for Sodium, Potassium, and Calcium Batteries: Influence of Polymer Chemistry, Cation Identity, Charge Density, and Solvent on Conductivity

From the standpoint of material diversification and sustainability, the development of so-called “beyond lithium-ion” battery chemistries is important for the future of energy storage. Na, K, and Ca are promising as the basis for battery chemistries in that these elements are highly abundant. Here, a series of single-ion conducting polymer electrolytes (SIPEs) for Na, K, and Ca batteries are synthesized and investigated. The two classes of metal cation neutralized SIPEs compared are crosslinked poly(ethylene glycol) dimethacrylate-x-styrene sulfonate (PEGDMA-SS) and poly(tetrahydrofuran) diacrylate-x-4-styrenesulfonyl (trifluoromethylsulfonyl)imide (PTHFDA-STFSI); three cation types, three charge densities, and four swelling states are examined. The impact on conductivity of all of these parameters is studied, and in conjunction with small angle X-ray scattering (SAXS), it is found that promoting ion dissociation and preventing the formation of dense ionic aggregates facilitates ion transport. These results indicate many of the lessons learned from the Li SIPE literature can be translated to beyond Li chemistries. At 25 °C, the best performing Na/K and Ca exchanged polymers yield active cation conductivity on the order of 10 –4 S/cm and 10 –6 S/cm, respectively, for ethylene carbonate:propylene carbonate gelled SIPEs, and 10 –5 S/cm and 10 –7 S/cm, respectively, for glyme gelled SIPEs.

X-ray scattering↗
DOE OSTI2016

Water‐Based Assembly of Polymer–Metal Organic Framework (MOF) Functional Coatings

Metal organic frameworks (MOFs) have gained attention for their porosity, size selectivity, and structural diversity. There is a need for MOF‐based coatings, particularly in applications such as separations, electronics, and energy; yet forming thin, functional, conformal coatings is prohibitive because MOFs exist as a powder. Layer‐by‐layer assembly, a versatile thin film coating approach, offers a unique solution to this problem, but this approach requires MOFs that are water‐dispersible and bear a surface charge. Here, these issues are addressed by examining water‐based dispersions of MIL‐101(Cr) that facilitate the formation of robust polymer–MOF hybrid coatings. Specifically, the substrate to be coated is alternately exposed to an aqueous solution of poly(styrene sulfonate) and nano MIL‐101(Cr) dispersion, yielding linear film growth and coatings with a MOF content as high as 77 wt%. This approach is surface‐agnostic, in which the coating is successfully applied to silicon, glass, flexible plastic, and even cotton fabric, conformally coating individual fibers. By contrast, prior attempts at forming MOF‐coatings are severely limited to a handful of surfaces, require harsh chemical treatment, and are not conformal. The approach presented here unambiguously confirms that MOFs can be conformally coated onto complex and unusual surfaces, opening the door for a wide variety of applications.

De, Souvik↗