Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Persistent Hot-Spot Mix in Cryogenic Direct-Drive Fusion Experiments

We show that an x-ray emission signature associated with acceleration phase mass injection correlates with poor experimental hot-spot convergence and a reduced neutron production relative to expectations. It is shown that with increased target mass as well as with higher-design adiabats, this signature is reduced, whereas with increased debris on the target the signature is increased. Here, we estimate that the vapor region in typical best designs may have up to 2x the assumed hydrogen mass at the start of deceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Proton distribution visualization in perovskite nickelate devices utilizing nanofocused x rays

We use a 30-nm x-ray beam to study the spatially resolved properties of a SmNiO 3 -based nanodevice that is doped with protons. The x-ray absorption spectra supported by density-functional theory simulations show partial reduction of nickel valence in the region with high proton concentration, which leads to the insulating behavior. Concurrently, x-ray diffraction reveals only a small lattice distortion in the doped regions. Together, our results directly show that the knob which proton doping modifies is the electronic valency and not the crystal lattice. Overall, the studies are relevant to ongoing efforts to disentangle structural and electronic effects across metal-insulator phase transitions in correlated oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Xylella fastidiosa causes transcriptional shifts that precede tylose formation and starch depletion in xylem

Abstract Pierce's disease (PD) in grapevine ( Vitis vinifera ) is caused by the bacterial pathogen Xylella fastidiosa . X. fastidiosa is limited to the xylem tissue and following infection induces extensive plant‐derived xylem blockages, primarily in the form of tyloses. Tylose‐mediated vessel occlusions are a hallmark of PD, particularly in susceptible V. vinifera . We temporally monitored tylose development over the course of the disease to link symptom severity to the level of tylose occlusion and the presence/absence of the bacterial pathogen at fine‐scale resolution. The majority of vessels containing tyloses were devoid of bacterial cells, indicating that direct, localized perception of X. fastidiosa was not a primary cause of tylose formation. In addition, we used X‐ray computed microtomography and machine‐learning to determine that X. fastidiosa induces significant starch depletion in xylem ray parenchyma cells. This suggests that a signalling mechanism emanating from the vessels colonized by bacteria enables a systemic response to X. fastidiosa infection. To understand the transcriptional changes underlying these phenotypes, we integrated global transcriptomics into the phenotypes we tracked over the disease spectrum. Differential gene expression analysis revealed that considerable transcriptomic reprogramming occurred during early PD before symptom appearance. Specifically, we determined that many genes associated with tylose formation (ethylene signalling and cell wall biogenesis) and drought stress were up‐regulated during both Phase I and Phase II of PD. On the contrary, several genes related to photosynthesis and carbon fixation were down‐regulated during both phases. These responses correlate with significant starch depletion observed in ray cells and tylose synthesis in vessels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Critical Barriers to Successful Implementation of Earth-Abundant, Mn-Rich Cathodes for Vehicle Applications and Beyond: A Detailed Study of Low SOC Impedance

We report that earth-abundant, sustainable cathode chemistries based on Mn are increasingly attractive for enabling a broader portfolio of cathode oxides. The well-known class of lithium- and manganese-rich cathodes still represents very viable options. However, despite the important work on understanding the mechanisms of voltage fade, hysteresis, and oxygen activity, relatively little attention has been given to understanding the impedance characteristics of these electrodes. In particular, an anomalous rise in area specific impedance at lower states of charge, as well as overall impedance rise and surface damage due to electrolyte interactions, represent critical barriers to implementation. This work presents a comprehensive study of impedance behavior in cobalt-free, lithium- and manganese-rich electrodes. The use of a robust surface treatment allows for long-term behavior to be probed in the absence of surface damage, capacity loss, and impedance rise due to electrolyte interactions. The anomalous rise in impedance could not be correlated to surface changes, or surface phase formation, but could be directly correlated with the bulk processes of voltage fade and voltage hysteresis. The activated material can be explained as a percolating network of higher-voltage, layered-type sites having facile Li diffusion. Interspersed throughout this network are lower-voltage, disordered sites that represent a significant barrier.

25 ENERGY STORAGE↗
DOE OSTI2020

Proof-of-concept Talbot–Lau x-ray interferometry with a high-intensity, high-repetition-rate, laser-driven K-alpha source

Talbot–Lau x-ray interferometry is a grating-based phase-contrast technique, which enables measurement of refractive index changes in matter with micrometric spatial resolution. The technique has been established using a variety of hard x-ray sources, including synchrotron, free-electron lasers, and x-ray tubes, and could be used in the optical range for low-density plasmas. The tremendous development of table-top high-power lasers makes the use of high-intensity, laser-driven K-alpha sources appealing for Talbot–Lau interferometer applications in both high-energy-density plasma experiments and biological imaging. To this end, we present the first, to the best of our knowledge, feasibility study of Talbot–Lau phase-contrast imaging using a high-repetition-rate laser of moderate energy (100 mJ at a repetition rate of 10 Hz) to irradiate a copper backlighter foil. The results from up to 900 laser pulses were integrated to form interferometric images. A constant fringe contrast of 20% is demonstrated over 100 accumulations, while the signal-to-noise ratio continued to increase with the number of shots. Phase retrieval is demonstrated without prior ex-situ phase stepping. Instead, correlation matrices are used to compensate for the displacement between reference acquisition and the probing of a PMMA target rod. The steps for improved measurements with more energetic laser systems are discussed. The final results are in good agreement with the theoretically predicted outcomes, demonstrating the applicability of this diagnostic to a range of laser facilities for use across several disciplines.

Bouffetier, V. (ORCID:0000000160791260)↗
DOE OSTI2021

From Anderson localization on random regular graphs to many-body localization

Highlights: • Anderson transition from ergodicity to localization on random regular graphs (RRG). • Analytical, pool method, and exact-diagonalization study of correlations on RRG. • Many-body localization (MBL) to ergodicity transition: quantum dots and spin chains. • Dynamical eigenstate correlation functions in RRG and MBL problems. • Anderson localization on RRG as a toy model for MBL. The article reviews the physics of Anderson localization on random regular graphs (RRG) and its connections to many-body localization (MBL) in disordered interacting systems. Properties of eigenstate and energy level correlations in delocalized and localized phases, as well at criticality, are discussed. In the many-body part, models with short-range and power-law interactions are considered, as well as the quantum-dot model representing the limit of the “most long-range” interaction. Central themes – which are common to the RRG and MBL problems – include ergodicity of the delocalized phase, localized character of the critical point, strong finite-size effects, and fractal scaling of eigenstate correlations in the localized phase.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Holographic View of Mixed-State Symmetry-Protected Topological Phases in Open Quantum Systems

We establish a holographic duality between d -dimensional mixed-state symmetry-protected topological (mSPT) phases and ( d + 1 ) -dimensional subsystem symmetry-protected topological (SSPT) states. Specifically, we show that the reduced density matrix of the boundary layer of a ( d + 1 ) -dimensional SSPT state with subsystem symmetry S and global symmetry G corresponds to a d -dimensional mSPT phase with strong S and weak G symmetries. Conversely, we demonstrate that the wave function of an SSPT state can be constructed by replicating the density matrix of the corresponding lower-dimensional mSPT phase. This mapping links the density matrix in lower dimensions to the entanglement properties of higher-dimensional wave functions, providing an approach for analyzing nonlinear quantities and quantum information metrics in mixed-state systems. Our duality offers a new perspective for studying intrinsic mSPT phases that are unique to open quantum systems, without pure-state analogues. We show that strange correlators and twisted Rényi- N correlators can diagnose these nontrivial phases and we explore their connection to strange correlators in pure-state SSPT phases. Furthermore, we discuss several implications of this holographic duality, including a method for preparing intrinsic mSPT phases through the duality. Published by the American Physical Society 2025

Sun, Shijun (ORCID:0000000168880030)↗
DOE OSTI2020

Mott localization in the van der Waals crystal CrI 3 : A GGA+DMFT study

Using the generalized gradient approximation plus dynamical mean-field theory (GGA+DMFT) we confirm the importance of multi-orbital dynamical correlations in determining the paramagnetic insulating state of CrI 3 . Furthermore, while the ferromagnetic phase reveals weak electronic correlation effects due to strong spin-orbital polarization, the Mott insulating state of paramagnetic CrI 3 crystal is shown to be driven by the interplay between orbital-dependent one-electron lineshape and multi-orbital electronic interactions. To probe the paramagnetic Mott insulating state we performed x-ray absorption spectroscopy (XAS) measurements for the two structural phases of CrI 3 . Our study is relevant to understanding the orbital-selective electronic structure reconstruction of Mott insulators and should be applicable to other van der Waals bonded materials from bulk to the ultrathin limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Singular Hall Response from a Correlated Ferromagnetic Flat Nodal‐Line Semimetal

Abstract Topological quantum phases are largely understood in weakly correlated systems, which have identified various quantum phenomena, such as the spin Hall effect, protected transport of helical fermions, and topological superconductivity. Robust ferromagnetic order in correlated topological materials particularly attracts attention, as it can provide a versatile platform for novel quantum devices. Here, a singular Hall response arising from a unique band structure of flat topological nodal lines in combination with electron correlation in a van der Waals ferromagnetic semimetal, Fe 3 GaTe 2 , with a high Curie temperature ofT c = 347 K is reported. High anomalous Hall conductivity violating the conventional scaling, resistivity upturn at low temperature, and a large Sommerfeld coefficient are observed in Fe 3 GaTe 2 , which implies heavy fermion features in this ferromagnetic topological material. The scanning tunneling microscopy, circular dichroism in angle‐resolved photoemission spectroscopy, and theoretical calculations support the original electronic features of the material. Thus, low‐dimensional Fe 3 GaTe 2 with electronic correlation, topology, and room‐temperature ferromagnetic order appears to be a promising candidate for robust quantum devices.

Chemistry↗
DOE OSTI2026

OC6 Phase Ia - Nonlinear hydrodynamic loading validation dataset

Two validation campaigns were examined within the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) Phase 1 project to examine the modeling tools' underprediction of loads and motion of a floating wind semisubmersible (semi) at their surge and pitch natural frequencies. These campaigns were performed at the Maritime Research Institute Netherlands (MARIN) in 2017 and 2018. The load cases (LC) considered include: LC1 – Load measurements across semi under current loading; LC2 - Load measurements across semi under forced surge oscillation; LC3 – Load measurements across semi under wave loading, while held fixed; LC4 – Free-decay motion measurements in surge, pitch, and heave; and LC5 – Motion measurements under wave loading. Details on the results from the OC6 Phase Ia project can be found in the reference, “OC6 Phase 1: Investigating the underprediction of low-frequency hydrodynamic loads and responses of floating wind turbines”, J Phys: Conf Series 1618 032033.

17 WIND ENERGY↗
DOE OSTI2022

Repurposing the θ (Al 2 Cu) phase to simultaneously increase the strength and ductility of an additively manufactured Al–Cu alloy

The Al–Cu–Mn–Zr (ACMZ) cast family of alloys offers unique properties and value propositions for higher strength, higher temperature lightweight components of future vehicles. Earlier research has demonstrated trade-offs in the selection of the alloy chemistry in which an increase in Cu content from 6 up to 9 wt% improves hot tear resistance but lowers ductility. However, a recent study has demonstrated that higher-Cu (9Cu) ACMZ fabricated with laser powder bed fusion additive manufacturing (AM) results in an increase in both ductility and strength when compared to as-aged microstructure of cast 9Cu alloys. The mechanisms of differing mechanical performance of the cast and AM ACMZ alloys are elucidated in the current paper through the utilization of in situ high energy x-ray diffraction (HEXRD) tensile testing wherein lattice strains of different phases are calculated and correlated to their stresses. The ACMZ alloys consisted of theta (θ) and theta prime (θ') phases (both Al 2 Cu in nominal composition) within an aluminum matrix. The larger micron-size θ phase which decorated the grain boundaries in 9Cu ACMZ cast alloys recorded small lattice strains, while the submicron, homogeneously distributed θ phase in the 9Cu ACMZ AM alloy recorded considerably higher lattice strains. The maximum stress reached in the θ phase for the cast 9Cu alloy was found to be ~280 MPa, which was lower than the AM 9Cu alloy which registered a maximum stress of ~1.4 GPa. These measurements indicate that delayed fracture of the finer intermetallic phases simultaneously improves the ductility and strength of AM 9Cu alloy relative to the cast 9Cu alloy, which exhibits early fracture of the larger intermetallic particles.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Topological Excitations in Pyrochlore Heterostructures

This research project focuses on developing innovative materials that demonstrate unique quantum properties, specifically within electron systems that exhibit complex interactions, known as "correlated electron systems." Unlike non-correlated materials, finding topological phases (special states of matter with protected properties that make them stable against defects) in these correlated systems is a significant challenge. The project aims to design synthetic templates of two-dimensional "Kagome lattice" structures, made from specific materials called iridates and osmates, to study and control these exotic quantum behaviors. To achieve this, the project employs a cutting-edge spectroscopic tools that allow precise analysis of artificial quantum materials in terms of both energy and momentum while they are being created, using a specialized laser-based process called laser Molecular Beam Epitaxy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Integrated High-Speed Microstructural Characterization Method Using Simultaneous XRD, Stereo-DIC, and PCI

High-speed characterization of the deformation mechanisms in polycrystalline metals requires the quantification of full strain fields and local microstructural evolutions simultaneously. In this paper, we present a novel experimental method to integrate phase-contrast imaging (PCI), stereographic digital image correlation (stereo-DIC), and full-ring X-ray diffraction (XRD) to allow for the simultaneous characterization of polycrystalline metals at 1MHz or higher. A Kolsky bar was integrated into the synchrotron X-ray source in Sector 32 ID-B at the Advance Photon Source (APS) at Argonne National Laboratory. When the sample is dynamically loaded, the diagnostic methods of full-ring XRD, PCI, and stereo-DIC are properly synchronized to record the deformation behavior at both continuum and microstructural scales as a function of the loading history. An advanced high-strength steel (AHSS) is used as a model material to demonstrate the capabilities of this new experimental method.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Null geodesics and thermodynamic phase transition of four-dimensional Gauss–Bonnet AdS black hole

Highlights: • Modified gravity theories. • Null geodesics and the thermodynamic phase transition. • Four-dimensional Gauss–Bonnet AdS black hole. • Correlation between gravity and thermodynamics. Modified gravity theories are of great interest in both observational and theoretical studies. In this article, we study the correlation between the null geodesics and the thermodynamic phase transition of a four-dimensional Gauss–Bonnet AdS black hole. Firstly, we study the phase structure of the black hole, using the coexistence and spinodal curves, to understand the phase transition in an extended phase space. The imprints of these phase transition features can be clearly observed from the functional dependence of photon orbit radius and minimum impact parameter with respect to the Hawking temperature and pressure. The change in these two quantities during the phase transition serve as order parameters which characterise the critical behaviour. The correlation shows that thermodynamic phase transition can be studied by observing the effects of strong gravitational field on the photon orbit and vice versa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Large response of charge stripes to uniaxial stress in La 1.475 Nd 0.4 Sr 0.125 CuO 4

The La-based "214"cuprates host several symmetry-breaking phases, including superconductivity, charge and spin order in the form of stripes, and a structural orthorhombic-to-tetragonal phase transition. Therefore these materials are an ideal system to study the effects of uniaxial stress onto the various correlations that pervade the cuprate phase diagram. We report resonant x-ray scattering experiments on La 1.475 Nd 0.4 Sr 0.125 CuO 4 (LNSCO-125) that reveal a significant response of charge stripes to uniaxial tensile stress of ~0.1GPa. These effects include a reduction of the onset temperature of stripes by ~50K, a 29-K reduction of the low-temperature orthorhombic-to-tetragonal transition, competition between charge order and superconductivity, and a preference for stripes to form along the direction of applied stress. Altogether, we observe a dramatic response of the electronic properties of LNSCO-125 to a modest amount of uniaxial stress.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Correlative image learning of chemo-mechanics in phase-transforming solids

We report constitutive laws underlie most physical processes in nature. However, learning such equations in heterogeneous solids (for example, due to phase separation) is challenging. One such relationship is between composition and eigenstrain, which governs the chemo-mechanical expansion in solids. Here we developed a generalizable, physically constrained image-learning framework to algorithmically learn the chemo-mechanical constitutive law at the nanoscale from correlative four-dimensional scanning transmission electron microscopy and X-ray spectro-ptychography images. We demonstrated this approach on Li X FePO 4 , a technologically relevant battery positive electrode material. We uncovered the functional form of the composition–eigenstrain relation in this two-phase binary solid across the entire composition range (0 ≤ X ≤ 1), including inside the thermodynamically unstable miscibility gap. The learned relation directly validates Vegard’s law of linear response at the nanoscale. Our physics-constrained data-driven approach directly visualizes the residual strain field (by removing the compositional and coherency strain), which is otherwise impossible to quantify. Heterogeneities in the residual strain arise from misfit dislocations and were independently verified by X-ray diffraction line profile analysis. Our work provides the means to simultaneously quantify chemical expansion, coherency strain and dislocations in battery electrodes, which has implications on rate capabilities and lifetime. Broadly, this work also highlights the potential of integrating correlative microscopy and image learning for extracting material properties and physics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗