Determining atmospheric density using a space-launched projectile
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The formation of tektites in general and layered tektites in particular seems to require a very special kind of cratering event. Evidence for the formation of pools of melt free of unmelted clasts has not been reported for the well-studied terrestrial craters such as Manicouagan or Ries. It is suggested that large amounts of relict-free melt were produced only when a sizeable fraction of the cratered target consisted of dry, high-porosity materials such as aeolian sediments. Since dry, high-porosity target materials are always confined to the outer 100 to 200 m of the Earth, the fraction of melt produced melt is probably higher in small (radius 50 to 500 m) craters than in large (r greater than 1 km) craters. Another reason to infer that the Southeast Asian tektites were produced in a multitude of small craters is the wide distribution of layered tektites. The file spans at least 1200 km, which would require ballistic ejection at velocities greater than 2 km s(-1) if all melt was generated in a single crater. It seems impossible to devise a scenario that would lead to the deposition of primary melt as a crystal-free pool at a distance of 600 km from the crater.
The initial observations of Spencer (1933) that two distinct impact melts coexist at the 90-m-diameter Wabar crater, Saudi Arabia, is confirmed. A dark or 'black' melt contains on the order of 4 percent meteoritic contamination, while the transparent or 'white' melt contains less than 1 percent. The Fe/Ni ratios in both varieties exhibit considerable scatter on electron-microprobe scales, akin to those reported by others for metal spherules in the black melt. If the meteoritic component is subtracted, both melts are chemically very similar. Clasts engulfed by the Wabar melts were investigated also, as they represent the progenitor lithologies from which the melts formed. Bulk compositions for these clasts reveal subtle differences in modal feldspar content within the quartz-rich Wabar target. Both melts require that a minimum of two target lithologies be present in the Wabar melt zone.
An optical potential abrasion-ablation collision model is used to calculate hadronic dissociation cross sections for one, two, and three nucleon removal for the first time for a 14.6A GeV Si-28 beam fragmenting in aluminum, tin, and lead targets. These estimates are compared with recent semiinclusive measurements. Significant differences between some calculated and measured semiinclusive cross sections exist which cannot be resolved without measurements of the exclusive channel hadronic cross sections. Calculations for each exclusive reaction channel contributing to the semiinclusive cross sections are presented and discussed.
Explore the source record for details and available documents.
Report proposes use of flexible gas-filled or liquid-filled pouches to shield spacecraft against impacts by small meteoroids and orbiting debris traveling at speeds approximately greater than 2 km/s. Shields made in various forms reminiscent of balloons, pillows, air mattresses, or sealed-air-bubble packing material. Serve as lightweight, easily installed alternatives to heavier, rigid shields made of space aluminum sheets custom-designed and attached to spacecraft only with great difficulty and expense.
Results are presented from the analyses of small ballistically dispersed melt samples (occurring in the form of aerodynamically shaped spheres, dumbbells, and teardrops) from the Wabar Crater (Saudi Arabia) and of melts from the Wabar and Nejed meteorites. On the basis of the data obtained and of models for crater forming processes it is concluded that the ballistically-dispersed glasses were formed from material at shallow levels in the target zone where temperatures were higher and where intimate physical contact with the disrupting impactor was achieved. Siderophile element fractionation was completed early, while the impactor was undergoing decompression and prior to mixing with the target glasses.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The temporal evolution of combustion flowfields established by the interaction between wedge-shaped bodies and explosive hydrogen-oxygen-nitrogen mixtures accelerated to hypersonic speeds in an expansion tube is investigated. The analysis is carried out using a fully implicit, time-accurate, computational fluid dynamics code that we developed recently for solving the Navier-Stokes equations for a chemically reacting gas mixture. The numerical results are compared with experimental data from the Stanford University expansion tube for two different gas mixtures at Mach numbers of 4.2 and 5.2. The experimental work showed that flow unstart occurred for the Mach 4.2 cases. These results are reproduced by our numerical simulations and, more significantly, the causes for unstart are explained. For the Mach 5.2 mixtures, the experiments and numerical simulations both produced stable combustion. However, the computations indicate that in one case the experimental data were obtained during the transient phase of the flow; that is, before steady state had been attained.
Three Early Archean spherule beds from Barberton, South Africa, have anomalous Cr isotope compositions in addition to large Ir anomalies, confirming the presence of meteoritic material with a composition similar to that in carbonaceous chondrites. The extra-terrestrial components in beds S2, S3, and S4 are estimated to be approx. l%, 50% - 60%, and 15% - 30%, respectively. These beds are probably the distal, and possibly global, ejecta from major large-body impacts. These impacts were probably much larger than the Cretaceous-Tertiary event, and all occurred over an interval of approx. 20 m.y., implying an impactor flux at 3.2 Ga that was more than an order of magnitude greater than the present flux.
A gas-act,uated penetration device has been developed for high-energy impact testing of structures. The high-energy impact. t,estiiig is for experimental simulation of uncontained engine failures. The non-linear transient finite element, code LS-DYNA3D has been used in the numerical simula.tions of a titanium rectangular blade with a.n aluminum target, plate. Threshold velocities for different combinations of pitch and yaw angles of the impactor were obtained for the impactor-target, t8est configuration in the numerica.1 simulations. Complet,e penet,ration of the target plate was also simulat,ed numerically. Finally, limited comparison of analytical and experimental results is presented for complete penetration of the target by the impactor.
An optical potential abrasion-ablation collision model is used to calculate hadronic dissociation cross sections for one, two, and three nucleon removal for the first time for a 14.6A GeV 28Si beam fragmenting in aluminum, tin, and lead targets. These estimates are compared with recent semi-inclusive measurements. Significant differences between some calculated and measured semi-inclusive cross sections exist which cannot be resolved without measurements of the exclusive channel hadronic cross sections. Calculations for each exclusive reaction channel contributing to the semi-inclusive cross sections are presented and discussed.
In support of recommendations by the Columbia Accident Investigation Board, a team has been studying the effect of debris impacting the reinforced carbon-carbon panels of the shuttle leading edge. The objective of this study was to examine the effect of varying parameters of the debris trajectory on the damage tolerance. Impacts at the upper and lower surface and the apex of the leading edge were examined. For each location, trajectory variances included both the alpha and beta directions. The results of the analysis indicated in all cases the beta sweep decreased the amount of damage to the panel. The increases in alpha resulted in a significant increase in damage to the RCC panel. In particular, for the lower surface, where the alpha can increase by 10 degrees, there was a nearly 40% increase in the impulse. As a result, it is recommended that for future analyses, a 10 degree offset in alpha from the nominal trajectory is included for impacts on the lower surface. It is also recommended to assume a straight aft, or zero beta, trajectory for a more conservative analysis.
The DebriSat hypervelocity impact experiment, performed at the Arnold Engineering Development Center (U.S.A.F. Arnold Air Force Base), is intended to update the catastrophic break-up models for modern satellites. To this end, the DebrisSat was built with many modern materials including structural panels of carbon-fiber, reinforced polymer (CFRP). Subsequent to the experiment, fragments of the DebrisSat have been extracted from porous, catcher panels used to gather the debris from the impact event. Thus far, one of the key observations from the collected fragments is that CFRP represents a large fraction of the fragments and that these fragments tend to be thin, flake-like structures or long, needle-like structures; whereas, debris with nearly equal dimensions is less prevalent. As current ballistic-limit models are all developed based upon spherical impacting particles, the experiment has pointed to a missing component in the current approach that must be considered. To begin to understand the implications of this observation, simulations like those shown in Fig. 1 have been performed using cylindrical structures at a representative orbital speed into an externally-insulated, double-wall shield that is representative of shielding of International-Space-Station-visiting vehicles. These simulations have been performed for normal impacts to the surface with three different angles-of-attack (AOA) to capture the effect on the shield performance. This paper documents the simulated shield and the models developed to study the effect of non-spherical fragments, as well as, derives the critical characteristics of CFRP impacting particles for the selected shield as shown in Fig. 2. To assist with the design of the updated debris models, this work summarizes the simulated results into a deployable form for evaluating the relative importance of fragment structures.
No abstract available