Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DIFFUSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Electron-cyclotron-resonance (ECR) plasma acceleration

A research effort directed at analytically and experimentally investigating electron-cyclotron-resonance (ECR) plasma acceleration is outlined. In addition, relevant past research is reviewed. Also, the prospects for application of ECR plasma acceleration to spacecraft propulsion are described. It is shown that previously unexplained losses in converting microwave power to directed kinetic power via ECR plasma acceleration can be understood in terms of diffusion of energized plasma to the physical walls of the accelerator. It is also argued that line radiation losses due to electron-ion and electron-atom inelastic collisions should be less than estimated in past research. Based on this new understanding, the expectation now exists that very efficient ECR plasma accelerators can be designed for application to high-specific-impulse spacecraft propulsion.

Sercel, Joel C.↗

Effect of a magnetic field on the diffusion of an electron-hole plasma in germanium.

Study in germanium of an optically injected electron-hole plasma, parallel and perpendicular to an applied magnetic field. The density gradient within the crystal was measured directly by an infrared-beam-absorption technique. Diffusion measurements made parallel to the magnetic field are adequately explained by the theory.

Gurnee, M. N.↗

Two-Dimensional Transport Studies for the Composition and Structure of the Io Plasma Torus

The overall objective of this project is to investigate the roles of local and spatially extended plasma sources created by Io, plasma torus chemistry, and plasma convective and diffusive transport in producing the long-lived S(+), S(++) and O(+) radial ribbon structures of the plasma torus, their System III longitude and local-time asymmetries, their energy sources and their possible time variability. To accomplish this objective, two-dimensional [radial (L) and System III longitude] plasma transport equations for the flux-tube plasma content and energy content will be solved that include the convective motions for both the east-west electric field and co-rotational velocity-lag profile near Io s orbit, radial diffusion, and the spacetime dependent flux-tube production and loss created by both neutral-plasma and plasma-ion reaction chemistry in the plasma torus. For neutral-plasma chemistry, the project will for the first time undertake the calculation of realistic three-dimensional, spatially-extended, and time-varying contributions to the flux-tube ion-production and loss that are produced by Io's corona and extended neutral clouds. The unknown two-dimensional spatial nature of diffusion in the plasma transport will be isolated and better defined in the investigation by the collective consideration of the foregoing different physical processes. For energy transport, the energy flow from hot pickup ions (and a new electron source) to thermal ions and electrons will be included in investigating the System III longitude and local-time temperature asymmetries in the plasma torus. The research is central to the scope of the NASA Sun-Earth Connection Roadmap in Quest II Campaign 4 "Comparative Planetary Space Environments" by addressing key questions for understanding the magnetosphere of planets with high rotation rates and large internal plasma sources and, in addition, is of considerable importance to the NASA Solar System Exploration Science Theme. In this regard, Jupiter is the most extreme example with its rapid rotation and with its inner Galilean satellite Io providing the dominant plasma source for the magnetosphere.

Smyth, William H.↗

Critical magnetic Reynolds number of the turbulent dynamo in collisionless plasmas

The intracluster medium of galaxy clusters is an extremely hot and diffuse, nearly collisionless plasma, which hosts dynamically important magnetic fields of ~μG strength. Seed magnetic fields of much weaker strength of astrophysical or primordial origin can be present in the intracluster medium. In collisional plasmas, which can be approximated in the magnetohydrodynamical (MHD) limit, the turbulent dynamo mechanism can amplify weak seed fields to strong dynamical levels efficiently by converting turbulent kinetic energy into magnetic energy. However, the viability of this mechanism in weakly collisional or completely collisionless plasma is much less understood. In this study, we explore the properties of the collisionless turbulent dynamo using three-dimensional hybrid-kinetic particle-in-cell simulations. We explore the properties of the collisionless turbulent dynamo in the kinematic regime for different values of the magnetic Reynolds number, Rm, initial magnetic-to-kinetic energy ratio, (E mag /E kin ) i , and initial Larmor ratio, (r Larmor /L box ) i , i.e. the ratio of the Larmor radius to the size of the turbulent system. We find that in the ‘un-magnetized’ regime, (r Larmor /L box ) i > 1, the critical magnetic Reynolds number for the dynamo action Rm crit ≈ 107 ± 3. In the ‘magnetized’ regime, (r Larmor /L box ) i ≲ 1, we find a marginally higher Rm crit = 124 ± 8. We find that the growth rate of the magnetic energy does not depend on the strength of the seed magnetic field when the initial magnetization is fixed. We also study the distribution and evolution of the pressure anisotropy in the collisionless plasma and compare our results with the MHD turbulent dynamo.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasma convection and ion beam generation in the plasma sheet boundary layer

Because of the dawn-dusk electric field E(dd), plasma in the magnetotail convects from the lobe toward the central plasma sheet (CPS). In the absence of space or velocity diffusion due to plasma turbulence, convection would yield a steady state distribution function f = V exp (-2/3) g(v exp 2 V exp 2/3), where V is the flux tube volume. Starting with such a distribution function and a plasma beta which varies from beta greater than 1 in the CPS to beta much smaller than 1 in the lobe, the evolution of the ion distribution function was studied considering the combined effects of ion diffusion by kinetic Alfven waves (KAW) in the ULF frequency range (1-10 mHz) and convection due to E(dd) x B drift in the plasma sheet boundary layer (PSBL) and outer central plasma sheet (OCPS). The results show that, during the early stages after launching the KAWs, a beamlike ion distribution forms in the PSBL and at the same time the plasma density and temperature decrease in the OCPS. Following this stage, ions in the beams convect toward the CPS resulting in an increase of the plasma temperature in the OCPS.

Moghaddam-Taaheri, E.↗

Experimental Measurements of Ion Diffusion Coefficients and Heating in a Multi-Ion-Species Plasma Shock

Collisional plasma shocks generated from supersonic flows are an important feature in many astrophysical and laboratory high-energy-density plasmas. Compared to single-ion-species plasma shocks, plasma shock fronts with multiple ion species contain additional structure, including interspecies ion separation driven by gradients in species concentration, temperature, pressure, and electric potential. We present time-resolved density and temperature measurements of two ion species in collisional plasma shocks produced by head-on merging of supersonic plasma jets, allowing determination of the ion diffusion coefficients. Here our results provide the first experimental validation of the fundamental inter-ion-species transport theory. The temperature separation, a higher-order effect reported here, is valuable for advancements in modeling HED and ICF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vacuum plasma coatings for turbine blades

Turbine blades, vacuum plasma spray coated with NiCrAlY, CoCrAlY or NiCrAlY/Cr2O3, were evaluated and rated superior to standard space shuttle main engine (SSME) coated blades. Ratings were based primarily on 25 thermal cycles in the MSFC Burner Rig Tester, cycling between 1700 F (gaseous H2) and -423 F (liquid H2). These tests showed no spalling on blades with improved vacuum plasma coatings, while standard blades spalled. Thermal barrier coatings of ZrO2, while superior to standard coatings, lacked the overall performance desired. Fatigue and tensile specimens, machined from MAR-M-246(Hf) test bars identical to the blades were vacuum plasma spray coated, diffusion bond treated, and tested to qualify the vacuum plasma spray process for flight hardware testing and application. While NiCrAlY/Cr2O3 offers significant improvement over standard coatings in durability and thermal protection, studies continue with an objective to develop coatings offering even greater improvements.

Holmes, R. R.↗

Reaction-diffusion analysis for one-step plasma etching and bonding of microfluidic devices

A self-similar reaction front develops in reactive ion etching when the ions penetrate channels of shallow height h. This relates to the patterning of microchannels using a single-step etching and bonding, as described by Rhee et al. [Lab Chip 5, 102 (2005)]. Experimentally, we report that the front location scales as x{sub f{approx}}ht{sup 1/2} and the width is time-invariant and scales as {delta}{approx}h. Mean-field reaction-diffusion theory and Knudsen diffusion give a semiquantitative understanding of these observations and allow optimization of etching times in relation to bonding requirements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Cartesian-diffusion Langevin method for hybrid kinetic-fluid Coulomb scattering in particle-in-cell plasma simulations

A novel, drag-diffusion Langevin method of hybrid, kinetic-fluid Coulomb scattering in plasmas is presented. Unlike previous methods, the frictional drag is always applied in the simulation frame of reference. The velocity-space diffusion is performed in the stationary-fluid frame of reference when anisotropic, and in the laboratory frame when isotropic. While the general method is mass-ratio independent, we focus on interactions of kinetic-ions and fluid-electrons to show first-order modifications to the electron velocity distribution function that are an important correction for the accurate calculation of electric resistivity. Inclusion of sub-cycling and a limit to the maximum collision frequency is shown to allow for arbitrarily large timesteps without numerical failure. Here the Langevin method is compared with a grid-based binary method and found to require a much less restrictive timestep in cases of ion–electron slowing and temperature equilibration; this finding differs from previous work and is dependent on the mass ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of the electron thermal diffusivity at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak

The dynamics of electron heat transport at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak was studied experimentally. Evolution of the profiles of the electron temperature and density was thoroughly investigated under conditions of fast variation in the plasma parameters. The energy balance in the electron channel is calculated with the help of the ASTRA code by using the measured plasma parameters. Correlation is revealed between the dynamics of electron heat transport and the behavior of small-scale drift turbulence measured using the enhanced scattering correlation diagnostics. The suppression of heat transfer and turbulence agrees well with the increase in the shear of poloidal plasma rotation calculated from experimental data in the neoclassical approximation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving turbine engine compressor performance retention through airfoil coatings

In order to evaluate the potential effectiveness of coatings in limiting erosive damage to compressor airfoils, an effort was initiated to evaluate candidate coatings for substrate alloys typically used in commercial engine high compressor blades. Laboratory and rig erosion testing of plasma deposited and diffusion coatings described in this paper have shown the potential of a two to four fold improvement in erosion life. The selective application of these coatings to approximately the outer third of the airfoil avoids coating the fatigue critical region of the blade, thus providing erosion resistance potentially without compromising the fatigue strength of the blade. Both the plasma and the diffusion coatings also offer the advantage of low initial cost and a multi-source production base.

Friedrich, L. A.↗

The TELEC - A plasma type of direct energy converter

The Thermo-Electronic Laser Energy Converter (TELEC) is a high-power density plasma device designed to convert a 10.6-micron CO2 laser beam into electric power. Electromagnetic radiation is absorbed in plasma electrons, creating a high-electron temperature. Energetic electrons diffuse from the plasma and strike two electrodes having different areas. The larger electrode collects more electrons and there is a net transport of current. An electromagnetic field is generated in the external circuit. A computer program has been designed to analyze TELEC performance allowing parametric variation for optimization. Values are presented for TELEC performance as a function of cesium pressure and for current density and efficiency as a function of output voltage. Efficiency is shown to increase with pressure, reaching a maximum over 45%.

Britt, E. J.↗

Mechanisms of gas precipitation in plasma-exposed tungsten

Precipitation in subsurface bubbles is a key process that governs how hydrogen isotopes migrate through and become trapped within plasma-exposed tungsten. We describe a continuum-scale model of hydrogen diffusion in plasma-exposed materials that includes the effects of precipitation. The model can account for bubble expansion via dislocation loop punching, using an accurate equation of state to determine the internal pressure. This information is used to predict amount of hydrogen trapped by bubbles, as well as the conditions where the bubbles become saturated. In an effort to validate the underlying assumptions, we compare our results with published positron annihilation and thermal desorption spectroscopy data, as well as our own measurements using the tritium plasma experiment (TPE).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of particle diffusion and suprathermal electrons in a magnetized helium plasma column

Studying radiative properties of magnetized helium plasma via high-resolution spectroscopy identified close correlations between the particle diffusion and suprathermal electrons for different modes of operation of the MISTRAL installation. The standard diagnostic emission lines in neutral helium (1s3d {sup 3}D-1s2p {sup 3}P, 1s3s {sup 3}S-1s2p {sup 3}P, 1s3d {sup 1}D-1s2p {sup 1}P, and 1s3s {sup 1}S-1s2p {sup 1}P) show anomalous ratios that are related to enhanced particle diffusion and suprathermal electron generation. The supplementary investigation of singlet/triplet Rydberg series (transitions 1snd {sup 3}D-1s2p {sup 3}P and 1s5p {sup 1}P-1s2s {sup 1}S) as well as ionic lines (HeII, transitions n = 3–4 at 469 nm and n = 4–6 at 656 nm) allowed quantitative characterization. Simulations carried out with the atomic physics code SOPHIA demonstrate that simultaneous implementation of diffusion processes and suprathermal electrons matches all experimental findings. Single consideration, however, of either diffusion or hot electrons is in contradiction to the proposed extended set of HeI and HeII emission lines. The high precision achieved with the LSJ-split level structure of SOPHIA coupled to Langmuir probe measurements allowed to conclude to a Bohm type diffusion in MISTRAL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the mechanism of acceleration behavior of plasma bullet

Two special experiments are designed to study the mechanism of the acceleration behavior of a plasma bullet when it exits a nozzle. First, a T-shape device is used to simulate the air diffusion when a plasma plume exits the nozzle. It is found that adding just 1% of N{sub 2}, O{sub 2}, or air to the main working gas He results in the acceleration of the plasma bullet. Second, materials of different permittivity are added to the left part of the outside of the tube. The experimental results show that the plasma bullet accelerates at the moment when it enters into the right part of the tube where there is no extra material on the outside of the tube. These two experiments confirm that the acceleration behavior of the plasma bullet when it exits the nozzle is due to the air diffusion, hence Penning ionization, and the permittivity change when the bullet exits the nozzle, for example, from a tube with high permittivity to air with low permittivity. Besides, electric field measurements show that the electric field in the bullet head increases when the plasma bullet accelerates. This confirms the electric field driven nature of the plasma bullet propagation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The structure of a magnetic-field front propagating non-diffusively in low-resistivity multi-species plasma

We report on the first experimental verification of the traveling-wave-like picture of a magnetic-field and an associated electric potential hill propagating non-diffusively in low resistivity plasma. High spatial resolution spectroscopic method, developed here, allowed for obtaining the detailed shape of the propagating magnetic-field front. The measurements demonstrated that the ion separation, previously claimed, results from the reflection of the higher charge-to-mass ratio ions from the propagating potential hill and from climbing the hill by the lower charge-to-mass ratio ions. This ion dynamics is found to be consistent with the observed electron density evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion energy distributions, electron temperatures, and electron densities in Ar, Kr, and Xe pulsed discharges

Ion energy distributions (IEDs) were measured near the edge of Faraday-shielded, inductively coupled pulsed plasmas in Ar, Kr, or Xe gas, while applying a synchronous dc bias on a boundary electrode, late in the afterglow. The magnitudes of the full width at half maximum of the IEDs were Xe > Kr > Ar, following the order of the corresponding electron temperatures in the afterglow, T{sub e}(Xe) > T{sub e}(Kr) > T{sub e}(Ar). The measured decays of T{sub e} with time in the afterglow were in excellent agreement with predictions from a global model. Measured time-resolved electron and positive ion densities near the plasma edge did not decay appreciably, even in the 80 {mu}s long afterglow. This was attributed to transport of ions and electrons from the higher density central region of the plasma to the edge region, balancing the loss of plasma due to diffusion. This provides a convenient means of maintaining a relatively constant plasma density in the afterglow during processing using pulsed plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The potential role of electric fields and plasma barodiffusion on the inertial confinement fusion database

The generation of strong, self-generated electric fields (GV/m) in direct-drive, inertial-confinement-fusion (ICF) capsules has been reported [Rygg et al., Science 319, 1223 (2008); Li et al., Phys. Rev. Lett. 100, 225001 (2008)]. A candidate explanation for the origin of these fields based on charge separation across a plasma shock front was recently proposed [Amendt et al., Plasma Phys. Controlled Fusion 51 124048 (2009)]. The question arises whether such electric fields in imploding capsules can have observable consequences on target performance. Two well-known anomalies come to mind: (1) an observed {approx_equal}2x greater-than-expected deficit of neutrons in an equimolar D{sup 3}He fuel mixture compared with hydrodynamically equivalent D [Rygg et al., Phys. Plasmas 13, 052702 (2006)] and DT [Herrmann et al., Phys. Plasmas 16, 056312 (2009)] fuels, and (2) a similar shortfall of neutrons when trace amounts of argon are mixed with D in indirect-drive implosions [Lindl et al., Phys. Plasmas 11, 339 (2004)]. A new mechanism based on barodiffusion (or pressure gradient-driven diffusion) in a plasma is proposed that incorporates the presence of shock-generated electric fields to explain the reported anomalies. For implosions performed at the Omega laser facility [Boehly et al., Opt. Commun. 133, 495 (1997)], the (low Mach number) return shock has an appreciable scale length over which the lighter D ions can diffuse away from fuel center. The depletion of D fuel is estimated and found to lead to a corresponding reduction in neutrons, consistent with the anomalies observed in experiments for both argon-doped D fuels and D{sup 3}He equimolar mixtures. The reverse diffusional flux of the heavier ions toward fuel center also increases the pressure from a concomitant increase in electron number density, resulting in lower stagnation pressures and larger imploded cores in agreement with gated, self-emission, x-ray imaging data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗