Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Deformation of a Ti-Nb alloy containing α"-martensite and omega phases

Microscopic deformation of a Ti-17at. %Nb alloy with high fractions of α"-martensite and ω phases was studied by in-situ synchrotron X-ray diffraction. Textures, phase fractions, individual lattice strains, and peak intensities during deformation were studied. It is found that, to accommodate the external tensile strain, some of the α" and ω grains were first transformed to the β-phase, which then continuously transformed to the α"-phase with chosen variants that effectively accommodate the deformation strain. Here, a strong (010)α" fiber texture was formed at the expense of the (001)α" and (111)α" fiber textures. Above 400 MPa applied stress, (110)α" deformation twinning was triggered with a simultaneous stress relaxation in the (110)α" family and a slight increase in its texture strength in the loading direction.

36 MATERIALS SCIENCE↗

Suppression of metastable-phase inclusion in N-polar (0001{sup ¯}) InGaN/GaN multiple quantum wells grown by metalorganic vapor phase epitaxy

The metastable zincblende (ZB) phase in N-polar (0001{sup ¯}) (−c-plane) InGaN/GaN multiple quantum wells (MQWs) grown by metalorganic vapor phase epitaxy is elucidated by the electron backscatter diffraction measurements. From the comparison between the −c-plane and Ga-polar (0001) (+c-plane), the −c-plane MQWs were found to be suffered from the severe ZB-phase inclusion, while ZB-inclusion is negligible in the +c-plane MQWs grown under the same growth conditions. The ZB-phase inclusion is a hurdle for fabricating the −c-plane light-emitting diodes because the islands with a triangular shape appeared on a surface in the ZB-phase domains. To improve the purity of stable wurtzite (WZ)-phase, the optimum conditions were investigated. The ZB-phase is dramatically eliminated with decreasing the V/III ratio and increasing the growth temperature. To obtain much-higher-quality MQWs, the thinner InGaN wells and the hydrogen introduction during GaN barriers growth were tried. Consequently, MQWs with almost pure WZ phase and with atomically smooth surface have been demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the inward drift of runaway electrons during the plateau phase of runaway current

The well observed inward drift of current carrying runaway electrons during runaway plateau phase after disruption is studied by considering the phase space dynamic of runaways in a large aspect ratio toroidal system. We consider the case where the toroidal field is unperturbed and the toroidal symmetry of the system is preserved. The balance between the change in canonical angular momentum and the input of mechanical angular momentum in such a system requires runaways to drift horizontally in configuration space for any given change in momentum space. The dynamic of this drift can be obtained by integrating the modified Euler-Lagrange equation over one bounce time. It is then found that runaway electrons will always drift inward as long as they are decelerating. This drift motion is essentially non-linear, since the current is carried by runaways themselves, and any runaway drift relative to the magnetic axis will cause further displacement of the axis itself. A simplified analytical model is constructed to describe such inward drift both in the ideal wall case and no wall case, and the runaway current center displacement as a function of parallel momentum variation is obtained. The time scale of such displacement is estimated by considering effective radiation drag, which shows reasonable agreement with the observed displacement time scale. Furthermore, this indicates that the phase space dynamic studied here plays a major role in the horizontal displacement of runaway electrons during plateau phase. (C) 2016 AIP Publishing LLC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Learning the stable and metastable phase diagram to accelerate the discovery of metastable phases of boron

Boron, an element of captivating chemical intricacy, has been surrounded by controversies ever since its discovery in 1808. The complexities of boron stem from its unique position between metals and insulators in the Periodic Table. Recent computational studies have shed light on some of the stable boron allotropes. However, the demand for multifunctionality necessitates the need to go beyond the stable phases into the realm of metastability and explore the potentially vast but elusive metastable phases of boron. Traditional search for stable phases of materials has focused on identifying materials with the lowest enthalpy. Here, we introduce a workflow that uses reinforcement learning coupled with decision trees, such as Monte Carlo tree search, to search for stable and metastable boron phases, with enthalpy as the objective. We discover new boron metastable phases and construct a phase diagram that locates their phase space (T, P) at different levels of metastability (ΔG) from the ground state and provides useful information on the domains of relative stability of the various stable and metastable boron phases.

42 ENGINEERING↗

High pressure structural phase transitions in Dysprosium to 202 GPa

High pressure structural phase transitions in heavy lanthanide metal Dysprosium (Dy) have been studied to 202 GPa (Volume Compression V/V 0 = 0.36) in a diamond anvil cell employing copper as an internal x-ray pressure standard. The previously assigned monoclinic (C2/m) phase above 72 GPa has been reexamined and assigned to an orthorhombic phase with sixteen atoms per cell (oF16) based on structural refinements. The equation of state is presented to 202 GPa and indicates a volume change of 2.3% during the structural phase transition from distorted face-centered cubic (hR24) phase to oF16 phase at 72 GPa. The oF16 phase can be regarded as a pseudo-orthorhombic eight-layered structure with (b/c) ratio decreasing from an ideal value of $\sqrt{3}$ with increasing pressure to 202 GPa. The ultrahigh pressure structural phases of Dy are compared with other members of the lanthanide series.

36 MATERIALS SCIENCE↗

X-ray Absorption and Diffraction Studies of the Mixed-phase State of (CrxV1-x)2O3

X-ray diffraction and vanadium x-ray absorption near-edge structure (XANES) data have been obtained for (V{sub 1-x}Cr{sub x}){sub 2}O{sub 3} samples containing several concentrations of Cr, crossing the metal-insulator transition boundary. For single-phase single-crystal samples our theoretical results are generally in good qualitative agreement with our experimental single-crystal XANES, for both crystal orientations relative to the incident-beam electric vector. However, an anomalous peak occurs for both orientations in the K pre-edge of the single-crystal sample containing 1.2% Cr, a paramagnetic insulator sample that is in the concentration regime corresponding to the room-temperature two-phase (coexistence) region of the phase diagram. Upon increasing the temperature of the 0.4% Cr powdered material to 400 K so that one enters the two-phase region of the phase diagram, a similar peak appears and then diminishes at 600 K. These results, as well as experiments done by others involving room-temperature and low-temperature XANES of a 1.1% Cr sample, suggest that this feature in the V pre-edge structure is associated with the appearance under some circumstances of a small amount of highly distorted VO{sub 6} octahedra in the interface region between coexisting metal and insulating phases. Finally, we find that, for the two-phase regime, the concentration ratio of the metal-to-insulating phase varies between different regions from a sample batch of uniform composition made by the skull melting method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Addressing the Amorphous Content Issue in Quantitative Phase Analysis: The Certification of NIST Standard Reference Material 676a

A non-diffracting surface layer exists at any boundary of a crystal and can comprise a mass fraction of several percent in a finely divided solid. This has led to the long-standing issue of amorphous content in standards for quantitative phase analysis (QPA). NIST standard reference material (SRM) 676a is a corundum ({alpha}-Al{sub 2}O{sub 3}) powder, certified with respect to phase purity for use as an internal standard in powder diffraction QPA. The amorphous content of SRM 676a is determined by comparing diffraction data from mixtures with samples of silicon powders that were engineered to vary their specific surface area. Under the (supported) assumption that the thickness of an amorphous surface layer on Si was invariant, this provided a method to control the crystalline/amorphous ratio of the silicon components of 50/50 weight mixtures of SRM 676a with silicon. Powder diffraction experiments utilizing neutron time-of-flight and 25 keV and 67 keV X-ray energies quantified the crystalline phase fractions from a series of specimens. Results from Rietveld analyses, which included a model for extinction effects in the silicon, of these data were extrapolated to the limit of zero amorphous content of the Si powder. The certified phase purity of SRM 676a is 99.02% {+-} 1.11% (95% confidence interval). This novel certification method permits quantification of amorphous content for any sample of interest, by spiking with SRM 676a.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ Raman spectroscopy of pressure-induced phase transformations in polycrystalline TbPO 4 , DyPO 4 , and Gd x Dy (1– x ) PO 4 [ In situ Raman spectroscopy of pressure-induced phase transformations in DyPO 4 and Gd x Dy (1– x ) PO 4 ]

Xenotime DyPO 4 and Gd x Dy (1–x) PO 4 (x = 0.4, 0.5, 0.6) (tetragonal I41amd zircon structure) have been studied at ambient temperature under high pressures inside a diamond anvil cell with in situ Raman spectroscopy. The typical Raman–active modes of the xenotime structure were observed at low pressures and the appearance of new Raman peaks at higher pressures indicated a phase transformation to a lower symmetry structure—likely monoclinic. Raman mode softening was observed, resulting in a line crossing at approximately 7–8 GPa for each material and preceding the phase transformation. The onset of phase transformation for DyPO 4 occurred at a pressure of 15.3 GPa. DyPO 4 underwent a reversible phase transformation and returned to the xenotime phase after decompression. The transformation pressures of the solid solutions (Gd x Dy (1–x) PO 4 ) were in the range 10–12 GPa. The GdxDy(1–x)PO 4 solid solutions yielded partially reversible phase transformations, retaining some of the high–pressure phase spectrum while reforming xenotime peaks during decompression. The substitution of Gd into DyPO 4 decreased the transformation pressure relative to pure DyPO 4 . In conclusion, the ability to modify the phase transformation pressures of xenotime rare–earth orthophosphates by chemical variations of solid solutions may provide additional methods to improve the performance of ceramic matrix composites.

36 MATERIALS SCIENCE↗

Phase identification and control of thin films deposited by co-evaporation of elemental Cu, Zn, Sn, and Se

Kesterite thin films [(i.e., Cu{sub 2}ZnSn(S,Se){sub 4} and related alloys] have been the subject of recent interest for use as an absorber layer for thin film photovoltaics due to their high absorption coefficient (>10{sup 4} cm{sup -1}), their similarity to successful chalcopyrites (like CuInxGa{sub 1-x}Se{sub 2}) in structure, and their earth-abundance. The process window for growing a single-phase kesterite film is narrow. In this work, we have documented, for our 9.15%-efficient kesterite co-evaporation process, (1) how appearance of certain undesirable phases are controlled via choice of processing conditions, (2) several techniques for identification of phases in these films with resolution adequate to discern changes that are important to device performance, and (3) reference measurements for those performing such phase identification. Data from x-ray diffraction, x-ray fluorescence, Raman scattering, scanning electron microscopy, energy dispersive spectroscopy, and current-voltage characterization are presented.

36 MATERIALS SCIENCE↗

Unit cell determination of coexisting post-perovskite and H-phase in (Mg,Fe)SiO3 using multigrain XRD: compositional variation across a laser heating spot at 119 GPa

Multigrain X-ray diffraction (XRD) can be used to accurately calculate the unit cell parameters of individual mineral phases in a mineral assemblage contained in a diamond anvil cell (DAC). Coexisting post-perovskite (ppv) and H-phase were synthesized at 119 GPa and 2500 K from (Mg 0.85 Fe 0.15 )SiO 3 in a laser-heated DAC. The unit cell parameters of the ppv and coexisting H-phase were determined using multigrain XRD with a 5 μm spatial resolution, close to the size of the X-ray beam, to understand compositional variations across the center area (20–30 μm) in a laser-heated sample. The ppv phase was Fe-depleted and the unit cell volume of ppv decreased by only 0.16 % (corresponding to ~3 % variation of FeSiO 3 ) from the heating center to 10 μm off the center, while the sample pressure remained at 119 GPa in a Ne quasi-hydrostatic environment. The unit cell volume of the H-phase decreased by 0.54 % (~10 % variation of FeSiO 3 content) over the same 10 μm distance. Both phases were more Fe-enriched in the slightly hotter center. This observation suggests that thermal diffusion may not be the major driver for the compositional variations of ppv and H-phase in the center portion of a laser-heated sample. Instead, these variations could be caused by a temperature effect on the partitioning between the ppv and H-phase over the small gradient.

58 GEOSCIENCES↗

Real-time X-ray phase-contrast imaging using SPINNet—a speckle-based phase-contrast imaging neural network

X-ray phase-contrast imaging has become indispensable for visualizing samples with low absorption contrast. In this regard, speckle-based techniques have shown significant advantages in spatial resolution, phase sensitivity, and implementation flexibility compared with traditional methods. However, the computational cost associated with data inversion has hindered their wider adoption. By exploiting the power of deep learning, we developed a speckle-based phase-contrast imaging neural network (SPINNet) that significantly improves the imaging quality and boosts the phase retrieval speed by at least 2 orders of magnitude compared to existing methods. To achieve this performance, we combined SPINNet with a coded-mask-based technique, an enhanced version of the speckle-based method. Using this scheme, we demonstrate the simultaneous reconstruction of absorption and phase images on the order of 100 ms, where a traditional correlation-based analysis would take several minutes even with a cluster. In addition to significant improvement in speed, our experimental results show that the imaging and phase retrieval quality of SPINNet outperform existing single-shot speckle-based methods. Furthermore, we successfully demonstrate SPINNet application in x-ray optics metrology and 3D x-ray phase-contrast tomography. Our result shows that SPINNet could enable many applications requiring high-resolution and fast data acquisition and processing, such as in situ and in operando 2D and 3D phase-contrast imaging and real-time at-wavelength metrology and wavefront sensing.

36 MATERIALS SCIENCE↗

X-Ray Diffraction and Electron Microscopy Studies of the Size Effects on Pressure-Induced Phase Transitions in CdS Nanocrystals

In recent years, investigations of the phase transition behavior of semiconducting nanoparticles under high pressure has attracted increasing attention due to their potential applications in sensors, electronics, and optics. However, current understanding of how the size of nanoparticles influences this pressure-dependent property is somewhat lacking. In particular, phase behaviors of semiconducting CdS nanoparticles under high pressure have not been extensively reported. Therefore, in this work, CdS nanoparticles of different sizes are used as a model system to investigate particle size effects on high-pressure-induced phase transition behaviors. In particular, 7.5, 10.6, and 39.7 nm spherical CdS nanoparticles are synthesized and subjected to controlled high pressures up to 15 GPa in a diamond anvil cell. Analysis of all three nanoparticles using in-situ synchrotron wide-angle X-ray scattering (WAXS) data shows that phase transitions from wurtzite to rocksalt occur at higher pressures than for bulk material. Bulk modulus calculations not only show that the wurtzite CdS nanomaterial is more compressible than rocksalt, but also that the compressibility of CdS nanoparticles depends on their particle size. Furthermore, sintering of spherical nanoparticles into nanorods was observed for the 7.5 nm CdS nanoparticles. Our results provide new insights into the fundamental properties of nanoparticles under high pressure that will inform designs of new nanomaterial structures for emerging applications.

Meng, Lingyao↗

Phase Behavior of Neat Triblock Copolymers and Copolymer/Homopolymer Blends Near Network Phase Windows

The phase behavior of poly(isoprene-b-styrene-b-methyl methacrylate) (ISM) copolymers near the styrene-rich network phase window was examined through the use of neat triblock copolymers and copolymer/homopolymer blends. Both end-block and middle-block blending protocols were employed using poly(isoprene) (PI), poly(methyl methacrylate) (PMMA), and poly(styrene) (PS) homopolymers. Blended specimens exhibited phase transformations to well-ordered nanostructures (at homopolymer loadings up to 26 vol % of the total blend volume). Morphological consistency between neat and blended specimens was established at various locations in the ISM phase space. Copolymer/homopolymer blending permitted the refinement of lamellar, hexagonally packed cylinder, and disordered melt phase boundaries as well as the identification of double gyroid (Q{sup 230}), alternating gyroid (Q{sup 214}), and orthorhombic (O{sup 70}) network regimes. Additionally, the experimental phase diagram exhibited similar trends to those found in a theoretical ABC triblock copolymer phase diagram with symmetric interactions and statistical segments lengths generated by Tyler et al.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Imaging the Phase Evolution of the Li-N-H Hydrogen Storage System

Complex metal hydrides provide high-density hydrogen storage, which is essential for vehicular applications. However, the utility of these materials has been limited by thermodynamic and kinetic barriers present during the dehydrogenation and rehydrogenation processes as new phases form inside parent phases. Better understanding of the mixed-phase mesostructures and their interfaces may assist in improving cyclability. In this work, the evolution of the phases during hydrogenation of lithium nitride and dehydrogenation of lithium amide with lithium hydride are probed with scanning-transmission X-ray microscopy at the nitrogen K edge. With this technique, intriguing core-shell structures were observed in particles of both partially hydrogenated Li 3 N and partially dehydrogenated LiNH 2 + 2 LiH. The potential contributions of both internal hydrogen mobility and interfacial energies on the generation of these structures are discussed.

08 HYDROGEN↗

Rapid Separation of Copper Phase and Iron-Rich Phase From Copper Slag at Low Temperature in a Super-Gravity Field

A novel approach for quickly separating a metal copper phase and iron-rich phase from copper slag at low temperature is proposed based on a super-gravity method. The morphology and mineral evolution of the copper slag with increasing temperature were studied using in situ high-temperature confocal laser scanning microscopy and ex situ scanning electron microscopy and X-ray diffraction methods. Fe{sub 3}O{sub 4} particles dispersed among the copper slag were transformed into FeO by adding an appropriate amount of carbon as a reducing agent, forming the slag melt with SiO{sub 2} at low temperature and assisting separation of the copper phase from the slag. Consequently, in a super-gravity field, the metallic copper and copper matte were concentrated as the copper phase along the super-gravity direction, whereas the iron-rich slag migrated in the opposite direction and was quickly separated from the copper phase. Increasing the gravity coefficient (G) significantly enhanced the separation efficiency. After super-gravity separation at G = 1000 and 1473 K (1200 °C) for 3 minutes, the mass fraction of Cu in the separated copper phase reached 86.11 wt pct, while that in the separated iron-rich phase was reduced to 0.105 wt pct. The recovery ratio of Cu in the copper phase was as high as up to 97.47 pct.

36 MATERIALS SCIENCE↗

Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach

Microstructure-based constitutive models for multiphase steels require accurate constitutive properties of the individual phases for component forming and performance simulations. We address this requirement with a combined experimental/theoretical methodology which determines the critical resolved shear stresses and hardening parameters of the constituent phases in QP980, a TRIP assisted steel subject to a two-step quenching and partitioning heat treatment. High energy X-Ray diffraction (HEXRD) from a synchrotron source provided the average lattice strains of the ferrite, martensite, and austenite phases from the measured volume during in situ tensile deformation. The HEXRD data was then input to a computationally efficient, elastic-plastic self-consistent (EPSC) crystal plasticity model which estimated the constitutive parameters of different slip systems for the three phases via a trial-and-error approach. The EPSC-estimated parameters are then input to a finite element crystal plasticity (CPFE) model representing the QP980 tensile sample. The predicted lattice strains and global stress versus strain curves are found to be 8% lower that the EPSC model predicted values and from the HEXRD measurements, respectively. This discrepancy, which is attributed to the stiff secant assumption in the EPSC formulation, is resolved with a second step in which CPFE is used to iteratively refine the EPSC-estimated parameters. Remarkably close agreement is obtained between the theoretically-predicted and experimentally derived flow curve for the QP980 material.

Hu, X. H. (ORCID:0000000277355091)↗

Phase Inversion in a Two-phase, BCC+B2, Refractory High Entropy Alloy

A phenomenon of "phase inversion", presumably the first ever experimental evidence in metallic alloys, is shown in a refractory high entropy alloy (RHEA), Al0.5NbTa0.8Ti1.5V0.2Zr. Phase inversion in crystalline solid systems is driven by the differences in elastic modulus of the two phases. Quenching from a high-temperature single phase field, the RHEA exhibits a co-continuous mixture of a disordered BCC and an ordered B2 phase, that upon isothermal annealing at 600°C develops via spinodal decomposition into a continuous B2 matrix with discrete cuboidal BCC precipitates aligned along the <001> directions. Longer term annealing at 600°C results in the development of necking constrictions along the B2 channels, eventually pinching-off these channels and making the BCC phase continuous with discrete B2 precipitates. This inversion the process can be related to the simultaneous operation of two processes:(i) spheroidization of the initially discrete cuboidal BCC precipitates driven by a reduction in the total interface energy and (ii) an increase in the stiffness of the B2 phase, relative to the BCC phase, due to chemical composition changes during annealing, forcing the B2 regions to become discrete driven by the reduction in the total elastic strain energy.

Soni, Vishal↗