Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTICLE PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Sensitivity of aerosol properties to new particle formation mechanism and to primary emissions in a continental-scale chemical transport model

Four theoretical formulations of new particle formation (NPF) and one empirical formulation are used to examine the sensitivity of observable aerosol properties to NPF formulation and to properties of emitted particles in a continental-scale model for the United States over a 1-month simulation (July 2004). For each formulation the dominant source of Aitken mode particles is NPF with only a minor contribution from primary emissions, whereas for the accumulation mode both emissions and transfer of particles from the Aitken mode are important. The dominant sink of Aitken mode number is coagulation, whereas the dominant sink of accumulation mode number is wet deposition (including cloud processing), with a minor contribution from coagulation. The aerosol mass concentration, which is primarily in the accumulation mode, is relatively insensitive to NPF formulation despite order-of-magnitude differences in the Aitken mode number concentration among the different parameterizations. The dominant sensitivity of accumulation mode number concentration is to the number of emitted particles (for constant mass emission rate). Comparison of modeled aerosol properties with aircraft measurements shows, as expected, better agreement in aerosol mass concentration than in aerosol number concentration for all NPF formulations considered. These comparisons yield instances of rather accurate simulations in the planetary boundary layer, with poor model performance in the free troposphere attributed mainly to lack of representation of biomass burning and/or to long-range transport of particles from outside the model domain. Agreement between model results and measurements is improved by using smaller grid cells (12 km versus 60 km).

09 BIOMASS FUELS↗

Ionization in atmospheres of brown dwarfs and extrasolar planets VI: Properties of large-scale discharge events

Mineral clouds in substellar atmospheres play a special role as a catalyst for a variety of charge processes. If clouds are charged, the surrounding environment becomes electrically activated, and ensembles of charged grains are electrically discharging (e.g., by lightning), which significantly influences the local chemistry creating conditions similar to those thought responsible for life in early planetary atmospheres. We note that such lightning discharges contribute also to the ionization state of the atmosphere. We apply scaling laws for electrical discharge processes from laboratory measurements and numerical experiments to DRIFT-PHOENIX model atmosphere results to model the discharge's propagation downward (as lightning) and upward (as sprites) through the atmospheric clouds. We evaluate the spatial extent and energetics of lightning discharges. The atmospheric volume affected (e.g., by increase of temperature or electron number) is larger in a brown dwarf atmosphere (10{sup 8}-10{sup 10} m{sup 3}) than in a giant gas planet (10{sup 4}-10{sup 6} m{sup 3}). Our results suggest that the total dissipated energy in one event is <10{sup 12} J for all models of initial solar metallicity. First attempts to show the influence of lightning on the local gas phase indicate an increase of small carbohydrate molecules like CH and CH{sub 2} at the expense of CO and CH{sub 4}. Dust-forming molecules are destroyed and the cloud particle properties are frozen in unless enough time is available for complete evaporation. We summarize instruments potentially suitable to observe lightning on extrasolar objects.

79 ASTRONOMY AND ASTROPHYSICS↗

Soot Superaggregates from Flaming Wildfires and Their Direct Radiative Forcing

Wildfires contribute significantly to global soot emissions, yet their aerosol formation mechanisms and resulting particle properties are poorly understood and parameterized in climate models. The conventional view holds that soot is formed via the cluster-dilute aggregation mechanism in wildfires and emitted as aggregates with fractal dimension D(sub f) approximately equals 1.8 mobility diameter D(sub m) (is) less than or equal to 1 micron, and aerodynamic diameter D(sub a) (is) less than or equal to 300 nm. Here we report the ubiquitous presence of soot superaggregates (SAs) in the outflow from a major wildfire in India. SAs are porous, low-density aggregates of cluster-dilute aggregates with characteristic D(sub f) approximately equals 2.6,D(sub m) (is) greater than 1 micron, and D(sub a) is less than or equal to 300 nm that form via the cluster-dense aggregation mechanism.We present additional observations of soot SAs in wildfire smoke-laden air masses over Northern California, New Mexico, and Mexico City. We estimate that SAs contribute, per unit optical depth, up to 35% less atmospheric warming than freshly-emitted (D(sub f) approximately equals 1.8) aggregates, and approximately equals 90% more warming than the volume-equivalent spherical soot particles simulated in climate models.

SAS↗

Cholesterics of colloidal helices: Predicting the macroscopic pitch from the particle shape and thermodynamic state

Building a general theoretical framework to describe the microscopic origin of macroscopic chirality in (colloidal) liquid crystals is a long-standing challenge. Here, we combine classical density functional theory with Monte Carlo calculations of virial-type coefficients to obtain the equilibrium cholesteric pitch as a function of thermodynamic state and microscopic details. Applying the theory to hard helices, we observe both right- and left-handed cholesteric phases that depend on a subtle combination of particle geometry and system density. In particular, we find that entropy alone can even lead to a (double) inversion in the cholesteric sense of twist upon changing the packing fraction. We show how the competition between single-particle properties (shape) and thermodynamics (local alignment) dictates the macroscopic chiral behavior. Moreover, by expanding our free-energy functional, we are able to assess, quantitatively, Straley’s theory of weak chirality, which is used in several earlier studies. Furthermore, by extending our theory to different lyotropic and thermotropic liquid-crystal models, we analyze the effect of an additional soft interaction on the chiral behavior of the helices. Finally, we provide some guidelines for the description of more complex chiral phases, like twist-bend nematics. Our results provide new insights into the role of entropy in the microscopic origin of this state of matter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent results on intermediate-energy nucleon knockout reactions

Nucleon knockout reactions using fast rare isotope beams are a well-suited tool to study single-particle properties of exotic nuclei and the evolution of nuclear shell structure towards the drip-lines. In particular the sudden removal of two protons from an intermediate-energy neutron-rich projectile has been shown to proceed as a direct reaction. In addition to giving spectroscopic information, this type of reaction promises a rather unique tool assign spins by measuring the momentum distributions of the heavy reaction residues. In the present experiment, the heavy reaction residues were measured in coincidence with the removed. These more final-state-exclusive measurements are key for further validation of this direct reaction and its use for quantitative spectroscopy of highly neutron-rich nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Broad-Band FT-ICR MS for the Penning-Trap Mass Spectrometer MATS

Ion traps are known as ideal tools for precision measurements of fundamental particle properties. In particular, traps have been set up at Radioactive Ion Beam (RIB) facilities to investigate exotic nuclei. During the last decade this field of research has constantly grown, with currently almost a dozen ion-trap systems at RIB facilities in Europe and North America and several more planned at future accelerators projects. One of these, the Advanced Trapping System MATS will be installed at the low-energy branch for radioactive-ion beams at the Facility for Antiprotons and Ion Research (FAIR) in Darmstadt (Germany). One of the MATS features will be non-destructive ion detection based on Fourier-Transform Ion-Cyclotron-Resonance Mass Spectrometry (FT-ICR MS). A prototype of the system has been developed at the Max-Planck-Institute for Nuclear Physics in Heidelberg (Germany) and recent results are outlined in this contribution.

74 ATOMIC AND MOLECULAR PHYSICS↗

Localized N, {lambda}, {sigma}, and {xi} single-particle potentials in finite nuclei calculated with SU{sub 6} quark-model baryon-baryon interactions

Localized single-particle potentials for all octet baryons, N, {lambda}, {sigma}, and {xi}, in finite nuclei, {sup 12}C, {sup 16}O, {sup 28}Si, {sup 40}Ca, {sup 56}Fe, and {sup 90}Zr, are calculated using the quark-model baryon-baryon interactions. G matrices evaluated in symmetric nuclear matter in the lowest order Brueckner theory (LOBT) are applied to finite nuclei in local density approximation. Nonlocal potentials are localized by a zero-momentum Wigner transformation. Empirical single-particle properties of the nucleon and the {lambda} hyperon in a nuclear medium have been known to be explained semiquantitatively in the LOBT framework. Attention is focused in the present consideration on predictions for the {sigma} and {xi} hyperons. The unified description for the octet baryon-baryon interactions by the SU{sub 6} quark model enables us to obtain less ambiguous extrapolation to the S=-1 and S=-2 sectors based on the knowledge in the NN sector than other potential models. The {sigma} mean field is shown to be weakly attractive at the surface, but turns out to be repulsive inside, which is consistent with the experimental evidence. The {xi} hyperon s.p. potential is also attractive at the nuclear surface region, and inside it fluctuates around zero. Hence {xi} hypernuclear bound states are unlikely. We also evaluate energy shifts of the {sigma}{sup -} and {xi}{sup -} atomic levels in {sup 28}Si and {sup 56}Fe, using the calculated s.p. potentials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simulated Polarimetric Fields of Ice Vapor Growth Using the Adaptive Habit Model. Part II: A Case Study from the FROST Experiment

Abstract A new adaptive habit model (AHM) grows ice crystals through vapor deposition while evolving ice particle properties, including shape and effective density. The AHM provides an opportunity to investigate observed microphysical processes through the computation of polarimetric variables and corroboration with microphysical model output. This study is unique because the polarimetric scattering calculations are computed using predicted microphysical parameters rather than a priori assumptions that are imposed within the scattering calculations in the forward simulator, allowing for a more effective comparison to radar observations. Through the simulation of a case in the Front Range of the Rocky Mountains in Colorado using the Advanced Research version of the Weather Research and Forecasting Model, it is found that the AHM approximates ice mass, shape, cloud vertical structure, and temporal evolution as reflected through polarimetric quantities compared to observations. AHM reflectivity magnitudes are similar to those observed with radar and are an improvement over spherical ice crystal assumptions. Further analyses are completed to examine the effect of microphysical processes on the evolution of the differential reflectivity and specific differential phase, both of which are simulated using the AHM. Simulations reveal a polarimetric response to ice crystal mass, number, size, density, and aspect ratio. While results reveal the need for model improvements (e.g., parameterizations for aggregation rate), testing forward-simulated radar fields against observations is a first step in the validation of model microphysical and precipitation processes.

54 ENVIRONMENTAL SCIENCES↗

First Measurements of the Double-Polarization Observables F , P , and H in ω Photoproduction off Transversely Polarized Protons in the N * Resonance Region

First measurements of double-polarization observables in ${\omega}$ photoproduction off the proton are presented here using transverse target polarization and data from the CEBAF Large Acceptance Spectrometer (CLAS) FROST experiment at Jefferson Lab. The beam-target asymmetry $F$ has been measured using circularly polarized, tagged photons in the energy range 1200–2700 MeV, and the beam-target asymmetries $H$ and $P$ have been measured using linearly polarized, tagged photons in the energy range 1200–2000 MeV. These measurements significantly increase the database on polarization observables. The results are included in two partial-wave analyses and reveal significant contributions from several nucleon (${N}^{*}$) resonances. In particular, contributions from new ${N}^{*}$ resonances listed in the Review of Particle Properties are observed, which aid in reaching the goal of mapping out the nucleon resonance spectrum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Very small-scale, segregating-fluidized-bed experiments: A dataset for CFD-DEM validation and uncertainty quantification

IWe report fluidization experiments were conducted on a small scale and with a rapid response (short duration) to enable corresponding simulations at low-computational cost. Rise times are reported for four or fewer polyethylene particles (intruders) in an air-fluidized bed of ~5000 group D glass beads. Experimental inputs were completely characterized—particle properties, system dimensions and operating conditions—which is necessary for validating computational fluid mechanics (CFD)-discrete element method (DEM) including a comprehensive uncertainty quantification (UQ) analysis. Input uncertainties are reported as bounds or cumulative distribution functions of measured values. The staggering number of simulations required to complete a UQ analysis (~O[10 4 ] simulations corresponding to ~5 uncertain inputs) motivates this study. These segregating-bed experiments are designed to permit analogous CFD-DEM simulations to complete in less than a day on a single (~2.5 GHz) computational processor unit (CPU). Segregation times are reported for several operating conditions, intruder sizes, and initial configurations, providing a rich dataset for numerical model testing, validation and UQ.

42 ENGINEERING↗

Model for Independent Particle Motion

Independent particle model in nuclear physics assumes that the nucleon in the nucleus moves in the average (mean field) potential generated by all other nucleons. This chapter gives a short overview of basic features of the independent particle motion in atomic nuclei and its theoretical realization in the framework of shell models for spherical, deformed, and rotating nuclei as well as in more sophisticated approaches such as microscopic+macroscopic model and density functional theories. Independent particle motion of nucleons leads to global and single-particle consequences. The global ones manifest themselves in the shell structure, and its consequences for the global structure of nuclear landscape, the existence of superheavy nuclei, and the superdeformation at high spin are briefly reviewed. Finally, the latter shows itself in the single-particle properties such as energies, alignments, and densities; their manifestations are illustrated on specific examples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ponderomotive effects of ultralight dark matter

I exhibit a new class of quadratic effects of ultralight dark matter. Axions, dark photons, and dilatons can exert rapidly oscillating forces, torques, and mass shifts on Standard Model particles. These effects average to zero at first order, but shift particle properties at second order, in analogy to the ponderomotive force in optics. Remarkably, these effects scale with the square of the amplitude of the dark matter field, even when the field’s direct physical effects depend only on its derivatives. I calculate the resulting observables in electron ge – 2 experiments using classical mechanics, recovering results previously derived using field theory. When considered properly, these particular experiments do not beat astrophysical bounds, but other precision experiments may have interesting sensitivity.

Zhou, Kevin↗

Effect of Topology on Transient Dynamic and Shock Response of Polymeric Lattice Structures

Architected cellular materials, such as lattice structures, offer potential for tunable mechanical properties for dynamic applications of energy absorption and impact mitigation. In this work, the static and dynamic behavior of polymeric lattice structures was investigated through experiments on octet-truss, Kelvin, and cubic topologies with relative densities around 8%. Here, dynamic testing was conducted via direct impact experiments (25–70 m/s) with high-speed imaging coupled with digital image correlation and a polycarbonate Hopkinson pressure bar. Mechanical properties such as elastic wave speed, deformation modes, failure properties, particle velocities, and stress histories were extracted from experimental results. At low impact velocities, a transient dynamic response was observed which was composed of a compaction front initiating at the impact surface and additional deformation bands whose characteristics matched low strain-rate behavior. For higher impact velocities, shock analysis was carried out using compaction wave velocity and Eulerian Rankine–Hugoniot jump conditions with parameters determined from full-field measurements.

36 MATERIALS SCIENCE↗

Experimental and theoretical indications for an intermediate {sigma}-dressed dibaryon in the NN interaction

Numerous theoretical and experimental arguments in favor of the generation of intermediate {sigma}-dressed dibaryon in NN interaction at middle and short distances are presented. We argue that this intermediate dibaryon should be responsible for the strong middle-range attraction and the short-range repulsion in the NN interaction, and also for the short-range correlations in nuclei. The suggested mechanism for the {sigma}-dressing of the dibaryon is identical to that which explains the Roper-resonance structure, its dominant decay mode and its extraordinary low mass. It is arguing that the (partial) chiral symmetry restoration effects, common for the Roper resonance and dressed dibaryon, are responsible for strong renormalizing of their masses and widths and the observed {sigma}-meson mass and decay width as well. The new experimental data on 2{pi}-production in the scalar-isoscalar channel produced in pn- and pd-collisions and recent data on {gamma}{gamma} correlations in pC and dC scattering in the GeV region seems to corroborate the existence of the {sigma}-dressed dibaryon in two- and three-nucleon interactions. A similar transformation mechanism from the glue to the scalar field can be valid also in some J/{Psi} decays and in enormous {sigma}-meson production in central pp collisions at high energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Prospects for spinel-stabilized, high-capacity lithium-ion battery cathodes

Herein we report early results on efforts to optimize the electrochemical performance of a cathode composed of a lithium- and manganese-rich “layered-layered-spinel” material for lithium-ion battery applications. Pre-pilot scale synthesis leads to improved particle properties compared with lab-scale efforts, resulting in high capacities (≳200 mAh/g) and good energy densities (>700 Wh/kg) in tests with lithium-ion cells. Subsequent surface modifications give further improvements in rate capabilities and high-voltage stability. These results bode well for advances in the performance of this class of lithium- and manganese-rich cathode materials.

25 ENERGY STORAGE↗

Aggregation Kinetics of Hematite Particles in the Presence of Outer Membrane Cytochrome OmcA of Shewanella oneidenesis MR-1

The aggregation behavior of 9, 36, and 112 nm hematite particles was studied in the presence of OmcA, a bacterial extracellular protein, in aqueous dispersions at pH 5.7 through time-resolved dynamic light scattering, electrophoretic mobility, and circular dichroism spectra, respectively. At low salt concentration, the attachment efficiencies of hematite particles in all sizes first increased, then decreased, and finally remained stable with the increase of OmcA concentration, indicating the dominant interparticle interaction changed along with the increase in the protein-to-particle ratio. Nevertheless, at high salt concentration, the attachment efficiencies of all hematite samples gradually decreased with increasing OmcA concentration, which can be attributed to increasing steric force. Additionally, the aggregation behavior of OmcA-hematite conjugates was more correlated to total particle-surface area than primary particle size. It was further established that OmcA could stabilize hematite nanoparticles more efficiently than bovine serum albumin (BSA), a model plasma protein, due to the higher affinity of OmcA to hematite surface. This study highlighted the effects of particle properties, solution conditions, and protein properties on the complicated aggregation behavior of protein-nanoparticle conjugates in aqueous environments.

59 BASIC BIOLOGICAL SCIENCES↗

Three‐Moment Representation of Rain in a Bulk Microphysics Model

Abstract A bulk three‐moment representation for rain microphysics is developed and implemented in the Predicted Particle Properties (P3) microphysics scheme. In addition, a new parameterization for rain self‐collection and collisional breakup (RSCB) is presented using a lookup table approach, based on the Spectral‐Bin Model (SBM). To quantify the impacts of sedimentation, evaporation, and RSCB on drop size distributions (DSDs), a rain shaft model is applied to a wide range of atmospheric scenarios (i.e., initial conditions and regimes) and compared against results from the SBM. DSD shapes are mainly determined by both sedimentation and evaporation, except in heavy rain where the impact of RSCB on DSD shape becomes more important than evaporation. The new parameterization for RSCB has a considerable impact on the mean drop size, improving the agreement between P3 and SBM. Only 4% of the original two‐moment rainshaft simulations have mean drop sizes and rain rates within ±20% of the SBM results, but this increases to more than 95% agreement when the three‐moment rain representation is used together with the new parameterization for RSCB. Generally, the improvement is more significant for heavy rain than for light drizzle. Remaining differences between bin and bulk model are attributable to treatments of evaporation, and the restriction to gamma DSDs in P3.

precipitation↗

Improving Aerosol Radiative Forcing and Climate in E3SM: Impacts of New Cloud Microphysics and Improved Wet Removal Treatments

Abstract Numerous Earth system models exhibit excessive aerosol effective forcing at the top of the atmosphere (TOA), including the Department of Energy's Energy Exascale Earth System Model (E3SM). Here, in the context of the E3SM version 3 effort, the predicted particle property (P3) stratiform cloud microphysics scheme and an enhanced deep convection parameterization suite (ZM_plus) are implemented into E3SM. The ZM_plus includes a convective cloud microphysics scheme, a multi‐scale coherent structure parameterization for mesoscale convective systems, and a revised cloud base mass flux formulation considering impacts of the large‐scale environment. The P3 scheme improved cloud and radiation particularly over the Northern Hemisphere and the frequency of heavy precipitation over the tropics, and the ZM_plus improved clouds in the tropics. P3 decreases aerosol effective forcing by 0.15 W m −2 , while the ZM_plus increases it by 0.27 W m −2 , resulting from excessive direct (0.31 W m −2 ) and indirect forcing (−1.79 W m −2 ). The excessive aerosol forcings are due to aerosol overestimation associated with insufficient aerosol wet removal. By improving the physical treatments in the aerosol wet removal, we effectively mitigate anthropogenic aerosol overestimation and thus attenuate direct (0.09 W m −2 ) and indirect aerosol forcing (−1.52 W m −2 ). Adjustment to primary organic matter hygroscopicity reduces direct and indirect forcing to more reasonable values: −0.13 W m −2 and −1.31 W m −2 , respectively. On climatology, improved aerosol treatments mitigate overestimation of aerosol optical depth.

54 ENVIRONMENTAL SCIENCES↗