Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Thermal, mechanical, and electrical properties of LSCo/mullite composite contact materials for solid oxide fuel cells

Lanthanum strontium cobaltite (LSCo) is considered as a good candidate cathode contact material for solid oxide fuel cells, due to high electrical conductivity. However, LSCo has a very large coefficient of thermal expansion (CTE) than the cells and metallic interconnects. As a result, poor mechanical stability is expected during thermal cycling. To minimize the CTE mismatch, we investigate a composite approach involving mixing LSCo with an inert material of low CTE, such as mullite at volume fractions from 0.1 to 0.4. Composite’s CTE shows a decreasing trend with increasing mullite volume fractions, and is consistent with model predictions. X-ray powder diffraction analysis of sintered LSCo/mullite composites exhibits no presence of other phases for samples aged for 500h at 800oC, indicating chemical compatibility. Electrical conductivity by a 4-pt method shows a decreasing trend with increasing mullite content. Contact strength of as-sintered and thermally cycled samples show that only the composite with 0.4 volume fraction has a measurable strength; the other composites have no strength. Overall, the composite approach is demonstrated in the LSCo/mullite system to lower the CTE and hence achieve thermal cycle stability. The addition of the inert phase to the LSCo matrix; however, also reduces the electrical conductivity.

Contact materials, LSCo, mullite, CTE, electrical ↗
DOE OSTI2021

Editors’ Choice—Necessity to Avoid Titanium Oxide as Electrocatalyst Support in PEM Fuel Cells: A Membrane Durability Study

Pt/TiO 2 as electrocatalyst was found to significantly increase the rate of the membrane chemical degradation in a polymer electrolyte membrane (PEM) fuel cell. The increased degradation was proved to be due to TiO x (TiO 2 or Ti 4 O 7 ), which is widely recognized as a promising corrosion-resistant electrocatalyst support. The membrane degradation (thinning) appears to be preferentially in the side facing anode electrode. Migrated Ti species as a result of TiO x dissolution during fuel cell operation in an acidic environment was quantified by electron probe microanalysis (EPMA). Total fluorine inventory loss of the membrane strongly depends on the quantity of migrated Ti species (likely Ti 3+ and/or Ti 4+ ). The membrane chemical degradation induced by TiO x is proposed to be due to dissolved ionic Ti species reacting with H 2 O 2 through a Fenton reaction. TiO x is determined to be inviable as electrocatalyst support for PEM fuel cells, and future research is suggested to be directed toward alternative oxides with similar corrosion-resistance.

08 HYDROGEN↗
DOE OSTI2021

Siloxane Deposition on the Ni-YSZ Solid Oxide Fuel Cell Anode Exposed to Bio-Syngas

Siloxane, a common contaminant present in biogas, is known for adverse effects on cogeneration prime movers. In this study, the siloxane deposition products and mechanism in the solid oxide fuel cell nickel-yttria stabilized zirconia (Ni-YSZ) anode are investigated analytically and experimentally. An SOFC with Ni-YSZ anode and pure Ni/YSZ pellets were exposed to a simulated biogas-reformate fuel with octamethylcyclotetrasiloxane (D4) contamination at 750 °C. The electrochemical characterization results show that the SOFCs performance degradation caused by D4 contamination is irreversible. Morphology and XRD results illustrate that silicon and carbon deposition can both be detected in the anode and pellets. Graphite, SiC and SiO2 are all possible products based on the results of XRD test. Here, according to the formation of graphite and SiC, the new mechanism suggests that carbon is also an essential factor in siloxane contamination of Ni-YSZ anodes besides silicon, which can be explained by the catalytic and electrochemical analysis.

25 ENERGY STORAGE↗
DOE OSTI2020

The new K, Pb-bearing uranyl-oxide mineral kroupaite: Crystal-chemical implications for the structures of uranyl-oxide hydroxy-hydrates

Abstract Kroupaite (IMA 2017-031), ideally KPb0.5[(UO2)8O4(OH)10]·10H2O, is a new uranyl-oxide hydroxylhydrate mineral found underground in the Svornost mine, Jáchymov, Czechia. Electron-probe micro-analysis (WDS) provided the empirical formula (K1.28Na0.07)Σ1.35(Pb0.23Cu0.14Ca0.05Bi0.03Co0.02Al0.01)Σ0.48 [(UO2)7.90(SO4)0.04O4.04(OH)10.00]·10H2O, on the basis of 40 O atoms apfu. Sheets in the crystal structure of kroupaite adopt the fourmarierite anion topology, and therefore kroupaite belongs to the schoepite-family of minerals with related structures differing in the interlayer composition and arrangement, and charge of the sheets. Uptake of dangerous radionuclides (90Sr or 135Cs) into the structure of kroupaite and other uranyl-oxide hydroxy-hydrate is evaluated based on crystal-chemical considerations and Voronoi-Dirichlet polyhedra measures. These calculations show the importance of these phases for the safe disposal of nuclear waste.

Geochemistry & Geophysics↗
DOE OSTI2025

The Effect of Operational Temperature on the Performance and Durability of Solid Oxide Fuel Cells and Solid Oxide Electrolysis Cells

Solid oxide fuel cells (SOFC) and solid oxide electrolysis cells (SOEC) have received great interest due to their highly effective reversibility as power generation and H2 production system without releasing any greenhouse gases into environment. The LSCF electrode exhibits a higher structural and performance stability under both SOFC and SOEC operation due to its mixed ionic and electronic conductivity, and there is no immediate delamination taking place during the initial several hundred hours operation. However, the LSCF based air electrode still presents significant performance degradation (with the increased resistance) over the prolonged operation, such as over 1000 hours of operation under SOFC and SOEC. The influence factors for the cell’s performance and stability need to be optimized to improve the power generation for SOFC and H2 production for SOEC. The effects of operational temperature on the performance and durability for both SOFC and SOEC are electrochemical operation dependent. The performance and performance durability for the first 1500h were currently studied under optimized operational temperature for reversible SOFC/SOEC.

Fan, Yueying [NETL Site Support Contractor, Nation↗
DOE OSTI2022

Mechanistic Investigation of Enhanced Catalytic Selectivity toward Alcohol Oxidation with Ce Oxysulfate Clusters

Ceria-based materials have been highly desired in photocatalytic reactions due to their easily redox property and strong oxygen storage and transfer ability. Herein, we report the structures of one CeCe 70 oxysulfate cluster and four MCe 70 clusters (M = Cu, Ni, Co, Fe) with the same Ce 70 core. As noted, single crystal X-ray diffraction confirmed the structures of CeCe 70 and the MCe 70 series, while Raman spectroscopy indicated an increase in oxygen defects upon the introduction of Cu and Fe ions. The clusters catalyzed the oxidation of 4-methoxybenzyl alcohol under ultraviolet light. CuCe 70 and FeCe 70 exhibited enhanced reactivity compared to CeCe 70 and improved aldehyde selectivity compared to control experiments. In comparison with their homogeneous congeners, the CeCe 70 /MCe 70 clusters altered the location of radical generation from the bulk solution to the clusters’ surfaces. Mechanistic studies highlight the role of oxygen defects and specific transition metal introduction for efficient photocatalysis. Furthermore, the mechanistic pathway in this study provides insight on how to select or design a highly selective catalyst for photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Accessibility and Mechanical Stability of Nanoporous Zinc Oxide and Aluminum Oxide Coatings Synthesized via Infiltration of Polymer Templates

The conformal nanoporous inorganic coatings with accessible pores that are stable under applied thermal and mechanical stresses represent an important class of materials used in the design of sensors, optical coatings, and biomedical systems. Here, we synthesize porous AlO x and ZnO coatings by the sequential infiltration synthesis (SIS) of two types of polymers that enable the design of porous conformal coatings—polymers of intrinsic microporosity (PIM) and block co-polymer (BCP) templates. Using quartz crystal microbalance (QCM), we show that alumina precursors infiltrate both polymer templates four times more efficiently than zinc oxide precursors. Using the quartz crystal microbalance (QCM) technique, we provide a comprehensive study on the room temperature accessibility to water and ethanol of pores in block copolymers (BCPs) and porous polymer templates using polystyrene-block-poly-4-vinyl pyridine (PS75-b-P4VP25) and polymers of intrinsic microporosity (PIM-1), polymer templates modified by swelling, and porous inorganic coatings such as AlO x and ZnO synthesized by SIS using such templates. Importantly, we demonstrate that no structural damage occurs in inorganic nanoporous AlO x and ZnO coatings synthesized via infiltration of the polymer templates during the water freezing/melting cycling tests, suggesting excellent mechanical stability of the coatings, even though the hardness of the inorganic nanoporous coating is affected by the polymer and precursor selections. We show that the hardness of the coatings is further improved by their annealing at 900 °C for 1 h, though for all the cases except ZnO obtained using the BCP template, this annealing has a negligible effect on the porosity of the material, as is confirmed by the consistency in the optical characteristics. These findings unravel new potential for the materials being used across various environment and temperature conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhancing Oxygen Reduction Activity and Cr Tolerance of Solid Oxide Fuel Cell Cathodes by a Multiphase Catalyst Coating

Intermediate temperature solid oxide fuel cells (IT-SOFCs) are cost-effective and efficient energy conversion systems. Here, the sluggish oxygen reduction reaction (ORR) and the degradation of cathodes are critical challenges to the commercialization of IT-SOFCs. Here, a highly efficient multiphase (MP) catalyst coating, consisting of Ba 1–x Co 0.7 Fe 0.2 Nb 0.1 O 3–δ (BCFN) and BaCO 3 , to enhance the ORR activity and durability of the state-of-the-art lanthanum strontium cobalt ferrite (La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ , LSCF) cathode is reported. The conformal MP catalyst-coated LSCF cathode shows a polarization resistance (R p ) of 0.048 Ω cm 2 at 650 °C, about one order of magnitude smaller than that of the bare LSCF. In an accelerated Cr-poisoning test, the degradation rate of the catalyst-coated LSCF electrode is 10 –3 Ω cm 2 h –1 (0.59% h –1 ) over 200 h, only one fifth of the degradation rate of the bare LSCF electrode at 750 °C. In addition, anode-supported single cells with the MP catalyst-coated LSCF cathode show a dramatically enhanced peak power density (1.4 W cm –2 vs 0.67 W cm –2 at 750 °C) and increased durability against Cr and H 2 O. Both experimental results and density functional theory-based calculations indicate that the BCFN phase improves the ORR activity while the BaCO 3 phase enhances the stability of the LSCF cathode.

solid oxide fuel cells↗
DOE OSTI2026

Tantalum oxide stabilized molybdenum-doped ruthenium oxide electrocatalysts for PEM water electrolysis

Proton exchange membrane (PEM) water electrolysis offers key advantages, including high current density, high efficiency, and compact system architecture for hydrogen production. However, its widespread implementation is limited by the scarcity and high cost of Ir-based anodic catalysts. Herein, we report an Ir-free electrocatalyst for the acidic oxygen evolution reaction (OER): tantalum oxide (TaO x )–coated molybdenum-doped RuO 2 (TaO x -MoRuO 2 ). The catalyst exhibits a low overpotential of 180 mV at 10 mA cm -2 and excellent durability, with a degradation rate of 0.034 mV h -1 over a 150-hour test at 50 mA cm -2 —surpassing other Ru-based catalysts evaluated under similar conditions. A PEM electrolyzer employing TaO x -MoRuO 2 as the anode maintained stable operation for 100 hours at 500 mA cm -2 . In conclusion, the TaO x coating layer suppresses Ru and Mo dissolution, thus enhancing their stability likely via interfacial electronic reconfiguration of Ru and Mo mediated by bridging oxygen atoms.

Durability↗
DOE OSTI2022

Exploring the potential of high entropy perovskite oxides as catalysts for water oxidation

Electrochemical water splitting is a promising technology to renewably generate hydrogen from water with no carbon footprint. However, the catalytic efficiency is hindered by the sluggishness of the oxygen evolution reaction (OER) at the anode. Therefore, developing earth-abundant, stable, and efficient OER catalysts is of keen interest. Recent studies have demonstrated that high entropy perovskite oxides (HEPOs) can exhibit superior OER activity and excellent electrochemical stability due to the synergistic effects of the multiple cations and the high entropy configuration effect. In this opinion paper, we point out the strengths and discuss the challenges and future prospects for HEPO-based electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unravelling high-temperature stability of lithium-ion battery with lithium-rich oxide cathode in localized high-concentration electrolyte

Lithium (Li)-rich manganese (Mn)-rich oxide (LMR) cathode materials, despite of the high specific capacity up to 250 mAh g-1 suffer from instability of cathode/electrolyte interfacial layer at high working voltages, causing continuous voltage decay and capacity fading, especially at elevated temperatures. In various battery systems, localized high-concentration electrolytes (LHCEs) have been widely reported as a promising candidate to form effective electrode/electrolyte interphases. Here, an optimized LHCE is studied in graphite (Gr)-based full cells being cycled at 25, 45 and 60 °C with the reference of a conventional LiPF6-based electrolyte. It is revealed that the LHCE can effectively suppress continuous electrolyte decompositions and mitigate the dissolution of Mn ions due to the formation of more protective electrode/electrolyte interphases on both anode and cathode, which, in turn, lead to significantly improved cycling stability and enhanced rate capability under the selected temperatures. The mechanistic understanding on the failure of the conventional LiPF6-containing electrolyte and the function of the LHCE in Gr||LMR cells under high temperatures provides valuable perspectives of electrolyte development for practical application of LMR cathodes in high energy density batteries over a wide temperature range.

Localized high-concentration electrolyte, Lithium-↗
DOE OSTI2023

Investigating the effect of aluminum oxide fixed charge on Schottky barrier height in molybdenum oxide-based selective contacts

A tunneling atomic layer deposited (ALD) AlO x layer was inserted in a Si|SiO x |AlO x |MoO x |metal tunnel diode structure to investigate the impact of fixed interface charge on Schottky barrier height. ALD AlO x provides a synthesis-tunable fixed charge and can provide excellent field effect passivation at the SiO x |AlO x interface. A large (>1 × 10 12 q.cm –2 ) negative fixed charge density was expected to decrease Schottky barrier height on p-type silicon and increase Schottky barrier height on n-type silicon by up to 0.4 eV based on an electrostatic model. Fixed charge density and interface trap state density were measured using a thick layer of AlO x in metal oxide semiconductor capacitor structures (MOSCAPs); Schottky barrier height and specific contact resistivity were measured using a tunneling-active layer of AlO x in contacted structures with MoO x . In some samples, HfO x interface layers were inserted between AlO x and silicon to quench the fixed negative charge. The Schottky barrier height was found to vary with processing conditions but did not have a strong correlation with expected fixed charge density. Here, while fixed charge may play a role in determining the Schottky barrier height, other parameters also have significant affect. Further work is needed to minimize contact resistivity and elucidate other factors impacting the Schottky barrier height.

14 SOLAR ENERGY↗
DOE OSTI2023

Selective Electrocatalytic Reduction of Nitrous Oxide to Dinitrogen with an Iron Porphyrin Complex

Nitrous oxide (N 2 O) is the third largest contributor to anthropogenic greenhouse gas emissions and plays a detrimental role in the depletion of ozone. Despite the contribution of N 2 O as an atmospheric pollutant, there are currently only a few examples of electrochemical N 2 O remediation to N 2 . Herein we report the electrocatalytic deoxygenation of N 2 O by iron tetraphenylporphyrin (FeTPP) to form N 2 with quantitative Faradaic efficiency and an observed rate of 1.91 s –1 . No degradation was observed after controlled potential electrolysis. Mechanistic investigation of the proposed catalytic steps determined that hydrogen-bond donors are critical for accelerating N 2 O activation and that proton transfer is involved in the rate-determining step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effect of Electrolyte Ions on Iridium Oxide-Based Water Oxidation Catalysis

The oxygen evolution reaction often limits the efficiency of renewable fuel syntheses due to its sluggish reaction kinetics. Of the factors that have been studied to improve this important reaction is how the choice of the electrolyte may alter the reaction kinetics. Despite its importance, sys-tematic studies of this effect have been relatively rare. Herein, we report an effort toward correcting this deficiency by investigating the effect of nitrate on water oxidation catalyzed by IrO x . The results show that nitrate can suppress the reaction, resulting in a decrease of the rate and an increase in the Tafel slope. The effect was found to be consistent with a microkinetic model incorporating competitive adsorption between reac-tion intermediates and nitrate, suggesting that the reaction mechanism was unaffected by anion identity. Moreover, this blocking effect exhibited dependence on the cations, following a trend Li + ≈ Na + ≈ K + > Cs + > TEA + . The results are expected to find broad applications in electrocatalysis.

Tafel slope analysis↗
DOE OSTI2021

Unlocking anionic redox activity in O3-type sodium 3 d layered oxides via Li substitution

Sodium ion batteries, because of their sustainability attributes, could be an attractive alternative to Li-ion technology for specific applications. However, it remains challenging to design high energy density and moisture stable Na-based positive electrodes. Here, we report an O3-type NaLi 1/3 Mn 2/3 O 2 phase showing anionic redox activity, obtained through a ceramic process by carefully adjusting synthesis conditions and stoichiometry. This phase shows a sustained reversible capacity of 190 mAh g -1 that is rooted in cumulative oxygen and manganese redox processes as deduced by combined spectroscopy techniques. Unlike many other anionic redox layered oxides so far reported, O3-NaLi 1/3 Mn 2/3 O 2 electrodes do not show discernible voltage fade on cycling. This finding, rationalized by density functional theory, sheds light on the role of inter- versus intralayer 3d cationic migration in ruling voltage fade in anionic redox electrodes. Another practical asset of this material stems from its moisture stability, hence facilitating its handling and electrode processing. Altogether, this work offers future directions towards designing highly performing sodium electrodes for advanced Na-ion batteries.

25 ENERGY STORAGE↗