Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optimal Experiment Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Angular Distributions of High-Mass Dilepton Production in Hadron Collisions

The SeaQuest experiment is a fixed-target dimuon experiment currently running at the Fermi National Accelerator Laboratory (FNAL). By utilizing the high-intensity, 120 GeV proton beam delivered by the FNAL Main Injector (MI), SeaQuest is able to measure proton-induced Drell-Yan dimuon production off of various nuclear targets in kinematic regions inaccessible to previous similar experiments. A suitably large fraction of the final dataset has been recorded, reconstructed, and analyzed. Very preliminary results from light-sea flavor asymmetry, nuclear dependence, and partonic energy loss analyses have been presented at numerous international conferences. A novel, FPGA-based trigger system has been designed, implemented, and optimized for the SeaQuest experiment. By implementing the trigger decision logic in FPGA firmware, it is more adaptable to changing experimental conditions. Additionally, the peripheral tasks of timing alignment, “trigger matrix” generation, and firmware uploading have been mostly automated, reducing the likelihood of user error in the maintenance and operation of the trigger system. Significant upgrades to hardware and firmware have greatly improved the performance of the trigger system since the 2012 commissioning run of SeaQuest. Four additional v1495 modules were added to facilitate thorough pulser testing of the firmware designs and in-situ pulser tests of all compiled firmware. These pulser tests proved crucial for diagnosing many errors that may have otherwise gone unnoticed. A significant change to the internal clocking of the trigger system eliminated a subtle source of rate-dependent trigger efficiency. With this upgrade, the trigger finally meets the “dead-time free” design specification. Drell-Yan dimuon data have been collected and analyzed for central θCS , with nearly flat acceptance in φCS , in the mass range 5.0 GeV < Mγ* < 10.0 GeV at forward xF with the SeaQuest spectrometer at FNAL. A very preliminary extraction of λ has been performed, and the remaining difficulties in extracting ν have been evaluated. Although the results are not yet publishable, significant progress has been made in developing this very challenging angular distributions analysis. A simple scheme for correcting for the angular acceptances of the spectrometer, trigger, and reconstruction has been developed and demonstrated. A generally applicable correction for the kinematically-dependent, rate-dependent reconstruction efficiency has been developed and applied to all current analyses on SeaQuest data. This rate-dependence correction was the first major hurdle in the path to publication of many preliminary SeaQuest results. The last remaining major correction for all analyses, but especially important for the angular parameter extraction, is the full characterization, rate-dependence correction, and subtraction of the combinatoric background contribution to the reconstructed dimuon sample. Independently, an intuitive, kinematic derivation of the single-event definitions of the Drell-Yan angular parameters has been developed under the assumption of unpolarized annihilating quarks within unpolarized nuclei. At O(αs), where the quarks remain co-planar with the hadrons in the photon rest frame, this kinematic method reproduces the Lam-Tung relation and derives an additional equality for µ2, which is only interpretable for single-event parameters. This method has been extended to the case of quark non- coplanarity, and the coplanar equalities become inequalities. A new equality was discovered, which should be obeyed by single-event parameters even in the case of a non-coplanar quark axis. The non-coplanar parameter relations have been used to derive constraints on the experimentally accessible values of λ and ν. These constraints are compared with existing data and have been found consistent, except in the cases where significant contributions from non-zero Boer-Mulders functions are expected. Finally, the kinematically- derived parameter definitions have been applied to high-precision CMS data. The relative contributions of the qq¯ and qg processes to the Z-boson “Drell-Yan” cross-section have been extracted. Further, an average measure of non-coplanarity, likely caused by O(α2) and higher processes, has been extracted.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Accelerated optimization of pure metal and ligand compositions for light-driven hydrogen production

Photocatalytic hydrogen production is a promising alternative to traditional hydrogen production. To implement photocatalytic hydrogen production the development of efficient, sustainable, and stable catalysts is necessary, and overcoming the current challenges surrounding high dimensional search spaces requires both computational and experimental efforts. Utilizing photo driven processes, stable colloidal metal catalysts can be formed in situ for efficient hydrogen production from water. When considering colloidal catalysts, stability is typically a concern solved through the addition of supports or ligands. In this work, poly(ethylene glycol) methyl ether thiol acts as a stabilizing ligand eliminating the need for catalyst supports while providing stable and active nanoparticle catalysts for more than 45 hours of reaction time and illumination. These systems utilize molecular photosensitizers, water reduction catalysts, stabilizing ligands, water, a sacrificial reductant, and organic solvents, posing new challenges pertaining to the optimization of multi-variable systems. Design of experiments (DOE) is applied to accelerate the understanding of variable interactions and is used as a tool to rapidly optimize the compositions of Au, Cu, Ni, and Fe containing systems. Through a collaboration leveraging computation and experimentation (both high throughput and characterizations), optimized performance peaks were obtained for each of these metals alongside distinct mapping of expected activity associated with photosensitizer, metal, and ligand concentration variations. With the highly digitized workflow, this study allowed for comparative generalizations to be made regarding photo driven hydrogen production for all four metals.

08 HYDROGEN↗
NASA NTRS1999

Framework Requirements for MDO Application Development

Frameworks or problem solving environments that support application development form an active area of research. The Multidisciplinary Optimization Branch at NASA Langley Research Center is investigating frameworks for supporting multidisciplinary analysis and optimization research. The Branch has generated a list of framework requirements, based on the experience gained from the Framework for Interdisciplinary Design Optimization project and the information acquired during a framework evaluation process. In this study, four existing frameworks are examined against these requirements. The results of this examination suggest several topics for further framework research.

Salas, A. O.↗
NASA NTRS2018

Optimization of Picosecond Laser Parameters for Surface Treatment of Composites Using a Design of Experiments (DOE) Approach

Based on guidelines from the Federal Aviation Administration, research supported by the NASA Advanced Composites Project is investigating methods to improve process control for surface preparation and pre-bond surface characterization on aerospace composite structures. The overall goal is to identify high fidelity, rapid, and reproducible surface treatments and surface characterization methods to reduce the uncertainty associated with the bonding process. The desired outcome is a more reliable bonded airframe structure, and to reduce time to achieve certification. In this work, a design of experiments (DoE) approach was conducted to determine optimum laser ablation conditions using a pulsed laser source with a nominal pulse width of 10 picoseconds. The laser power, frequency, scan speed, and number of passes (1 or 2) were varied within the laser system operating boundaries. Aerospace structural carbon fiber reinforced composites (Torayca® 3900-2/T800H) were laser treated, then characterized for contamination, and finally bonded for mechanical testing. Pre-bond characterization included water contact angle (WCA) using a handheld device, ablation depth measurement using scanning electron microscopy (SEM), and silicone contamination measurement using laser induced breakdown spectroscopy (LIBS). In order to accommodate the large number of specimens in the DoE, a rapid-screening, double cantilever beam (DCB) test specimen configuration was devised based on modifications to ASTM D5528. Specimens were tested to assess the failure modes observed under the various laser surface treatment parameters. The models obtained from this DoE indicated that results were most sensitive to variation in the average laser power. Excellent bond performance was observed with nearly 100% cohesive failure for a wide range of laser parameters. Below about 200 mW, adhesive failure was observed because contamination was left on the surface. For laser powers greater than about 600 mW, large amounts of fiber were exposed, and the failure mode was predominately fiber tear.

Palmieri, Frank L.↗
DOE OSTI2025

FuSED Users Manual, 5.24

The Fusion of Simulation, Experiment, and Data (FuSED) team provides a set of tools for solving inverse problems in structural dynamics and thermal physics, and also sensor placement optimization via Optimal Experimental Design (OED). These methods are used for designing experiments, model calibration, and verification/validation analysis of systems. This document provides a user’s guide to the input for the three apps that are supported for these methods. Details of input specifications, output options, and optimization parameters are included.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Analysis and optimization of seismic monitoring networks with Bayesian optimal experimental design

SUMMARY Monitoring networks increasingly aim to assimilate data from a large number of diverse sensors covering many sensing modalities. Bayesian optimal experimental design (OED) seeks to identify data, sensor configurations or experiments which can optimally reduce uncertainty and hence increase the performance of a monitoring network. Information theory guides OED by formulating the choice of experiment or sensor placement as an optimization problem that maximizes the expected information gain (EIG) about quantities of interest given prior knowledge and models of expected observation data. Therefore, within the context of seismo-acoustic monitoring, we can use Bayesian OED to configure sensor networks by choosing sensor locations, types and fidelity in order to improve our ability to identify and locate seismic sources. In this work, we develop the framework necessary to use Bayesian OED to optimize a sensor network’s ability to locate seismic events from arrival time data of detected seismic phases at the regional-scale. This framework requires five elements: (i) A likelihood function that describes the distribution of detection and traveltime data from the sensor network, (ii) A prior distribution that describes a priori belief about seismic events, (iii) A Bayesian solver that uses a prior and likelihood to identify the posterior distribution of seismic events given the data, (iv) An algorithm to compute EIG about seismic events over a data set of hypothetical prior events, (v) An optimizer that finds a sensor network which maximizes EIG. Once we have developed this framework, we explore many relevant questions to monitoring such as: how to trade off sensor fidelity and earth model uncertainty; how sensor types, number and locations influence uncertainty; and how prior models and constraints influence sensor placement.

58 GEOSCIENCES↗
NASA NTRS2018

Modeling-Driven Damage Tolerant Design of Graphene Nanoplatelet/Carbon Fiber/Epoxy Hybrid Composite Panels for Full-Scale Aerospace Structures

The objective of this study is to design a new nano graphenecarbon fiberpolymer hybrid composite that can be used for the NASA SLS Composite Exploration Upper Stage (CEUS) forward skirt structure. The new material will improve the resistance to open-hole compression failure of the structure relative to traditional polymer fiber composites. The material is designed rapidly and with little cost using the Integrated Computational Materials Engineering (ICME) approach. Multiscale modeling and experiments are used to synergistically optimize the material design to yield improved properties and performance by controlling key processing parameters for manufacturing nano-enhanced materials. Specifically, the nanocomposite panel showed a 22 reduction in mass relative to the traditional composite panel, while both designs are equal in terms of ease of manufacture. This potential mass savings corresponds to an estimated 45 savings in materials and manufacturing costs. The multiscale ICME workflow developed for this project can be readily applied to the development of nano-enhanced composite materials and large aerospace structures. In addition, all key aspects of ICME were employed to complete this project including multiscale modeling, experimental characterization and visualization, data management, visualization, error and uncertainty quantification, and education. The results presented herein indicate a dramatic level of success, as well as the power and potential of ICME approach and multiscale modeling for composite materials.

computational mechanics↗
NASA NTRS2009

Experimental Investigation of the Application of Microramp Flow Control to an Oblique Shock Interaction

The effectiveness of microramp flow control devices in controlling an oblique shock interaction was tested in the 15- by 15-Centimeter Supersonic Wind Tunnel at NASA Glenn Research Center. Fifteen microramp geometries were tested varying the height, chord length, and spacing between ramps. Measurements of the boundary layer properties downstream of the shock reflection were analyzed using design of experiments methods. Results from main effects, D-optimal, full factorial, and central composite designs were compared. The designs provided consistent results for a single variable optimization.

Hirt, Stefanie M.↗
NASA NTRS2000

G-LIMIT

Dynamic modeling and controller design efforts were conducted at the University of Alabama in Huntsville (UAH) on the Glovebox Integrated Microgravity Isolation Technology (g-LIMIT), under NAG8-1598; the funded period of performance was 8/26/98 through 12/31/00. The title of the grant was 'Support of g-LIMIT for Isolation of Space Science Experiments: Dynamic Modeling and Optimal Controller Synthesis.' Design codes were developed for implementation of a steady-state H infinity controller design method using the frequency weighted plant for the MDOF g-LIMIT design case.

Hampton, R. David↗
DOE OSTI2021

Coupling 1D xRAGE simulations with machine learning for graded inner shell design optimization in double shell capsules

Advances in machine learning provide the ability to leverage data from expensive simulations of high-energy-density experiments to significantly cut down on computational time and costs associated with the search for optimal target designs. This study presents an application of cutting-edge Bayesian optimization methods to the one-dimensional (1D) design optimization of double shell graded layer targets for inertial confinement fusion experiments. This investigation attempts to reduce hydrodynamic instabilities while retaining high yields for future NIF experiments. Machine learning methods can use predictive physics simulations to identify graded layer designs from within the vast design space that demonstrate high predicted performance, including novel designs with high uncertainty in performance that may hold unexpected promise. By applying machine learning tools to the simulation design, we map the trade-off between 1D yield and instability, specifically isolating parameter ranges, which maintain high performance while showing significantly improved Rayleigh–Taylor stability over the point design. Furthermore, the groundwork laid in this study will be a useful design tool for future NIF experiments with graded layer targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1996

A Surrogate Approach to the Experimental Optimization of Multielement Airfoils

The incorporation of experimental test data into the optimization process is accomplished through the use of Bayesian-validated surrogates. In the surrogate approach, a surrogate for the experiment (e.g., a response surface) serves in the optimization process. The validation step of the framework provides a qualitative assessment of the surrogate quality, and bounds the surrogate-for-experiment error on designs "near" surrogate-predicted optimal designs. The utility of the framework is demonstrated through its application to the experimental selection of the trailing edge ap position to achieve a design lift coefficient for a three-element airfoil.

Otto, John C.↗
DOE OSTI2016

Robust forecasts on fundamental physics from the foreground-obscured, gravitationally-lensed CMB polarization

Recent results from the BICEP, Keck Array and Planck Collaborations demonstrate that Galactic foregrounds are an unavoidable obstacle in the search for evidence of inflationary gravitational waves in the cosmic microwave background (CMB) polarization. Beyond the foregrounds, the effect of lensing by intervening large-scale structure further obscures all but the strongest inflationary signals permitted by current data. With a plethora of ongoing and upcoming experiments aiming to measure these signatures, careful and self-consistent consideration of experiments' foreground- and lensing-removal capabilities is critical in obtaining credible forecasts of their performance. We investigate the capabilities of instruments such as Advanced ACTPol, BICEP3 and Keck Array, CLASS, EBEX10K, PIPER, Simons Array, SPT-3G and SPIDER, and projects as COrE+, LiteBIRD-ext, PIXIE and Stage IV, to clean contamination due to polarized synchrotron and dust from raw multi-frequency data, and remove lensing from the resulting co-added CMB maps (either using iterative CMB-only techniques or through cross-correlation with external data). Incorporating these effects, we present forecasts for the constraining power of these experiments in terms of inflationary physics, the neutrino sector, and dark energy parameters. Made publicly available through an online interface, this tool enables the next generation of CMB experiments to foreground-proof their designs, optimize their frequency coverage to maximize scientific output, and determine where cross-experimental collaboration would be most beneficial. We find that analyzing data from ground, balloon and space instruments in complementary combinations can significantly improve component separation performance, delensing, and cosmological constraints over individual datasets. In particular, we find that a combination of post-2020 ground- and space-based experiments could achieve constraints such as σ(r)∼1.3×10{sup −4}, σ(n{sub t})∼0.03, σ( n{sub s} )∼1.8×10{sup −3}, σ(α{sub s})∼1.7×10{sup −3}, σ( M{sub ν} )∼31 meV, σ( w )∼0.09, σ( w{sub 0} )∼ 0.25, 0σ( w{sub a} )∼ 0.5, σ( N{sub eff} )∼0.024 and σ( Ω{sub k} )∼1.5×10{sup −3}, after component separation and iterative delensing.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A Computational Tool Compatible with NEAMS Code Packages for Optimizing the Shape of Nuclear Reactor Components and of Whole Core Performance

We designed and implemented a shape optimization tool that functions with NEAMS codes, and that nuclear scientists and engineers can employ to optimize the shape of individual components and the whole core under the applicable single- or multi-physics model comprising the employed code(s). The shape-optimization tool enables varying the geometric shape itself as well as its dimensions to yield, potentially, new component designs that are not limited by the designer’s intuition and previous experience. In cases where the optimal-shape object is an individual component, we provide the capability for additional verification that the whole-core performance using the optimized component performs better, under the prescribed optimization criteria, than the initial design. Our shape-optimization tool couples to NEAMS codes via a flexible input- composer interface and enables the user to constrain the shape’s evolution to ensure the component’s manufacturability. Finally, we demonstrate our shape-optimization tool with single- and multi-physics NEAMS codes. This objective is motivated by the recent advances in manufacturing technology that, combined with rising interest in novel reactor concepts, are creating new opportunities for innovation in the design of individual components that affect the performance of the full reactor system. In particular, Additive Manufacturing (AM) enables mass production of highly precise, intricate and complex component shapes that are not feasible with traditional manufacturing techniques. To accomplish this goal we developed and implemented in MOOSE: (1) discrete shape optimization capability based on a state-space search that uses Artificial Intelligence strategies to find the optimal state/shape; (2) smooth shape optimization tool that employs PETSc’s toolkit for advanced optimization (TAO) to optimize node-displacement of the components’ model sidesets; (3) hierarchical core optimization workflow that recognizes the repeating patterns typical in a nuclear reactor and performs the optimization one level at a time with increasing length scale. Each of these tools is equipped with user-specified constraints to avoid optimal shapes that are not manufacturable. The developed shape optimization tool is verified and demonstrated on various nuclear reactor core components and models. The optimization process accounts for tightly coupled physics that govern the behavior of these target reactors, and exercises several NEAMS codes in a coupled multiphysics fashion. The impact of the delivered shape optimization tool will materialize in the optimal design, from the outset, of advanced reactors currently contemplated to regain the US’s leadership in nuclear energy R&D. Novel reactor concepts, e.g. Molten Salt Reactors, and sizes/capacities, e.g. micro- reactors, provide a unique opportunity to optimize performance from the early stages of development, before the investment in components’ production lines, validation experiments, and licensing regimes make future improvements in performance prohibitively expensive and force sub-optimal performance on the affected reactor concept in perpetuity. This benefit will be realized by the delivered shape optimization tool regardless of the applicable manufacturing process whether traditional or AM, thereby broadening the impact of this project on current and future reactor concepts and technologies

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

A Hybrid Gradient Method to Designing Bayesian Experiments for Implicit Models

Bayesian experimental design (BED) aims at designing an experiment to maximize the information gathering from the collected data. The optimal design is usually achieved by maximizing the mutual information (MI) between the data and the model parameters. When the analytical expression of the MI is unavailable, e.g.,having implicit models with intractable data distributions, a neural network-based lower bound of the MI was recently proposed and a gradient ascent method was used to maximize the lower bound [1]. However, the approach in [1] requires a pathwise sampling path to compute the gradient of the MI lower bound with respect to the design variables, and such a pathwise sampling path is usually inaccessible for implicit models. In this work, we propose a hybrid gradient approach that leverages recent advances in variational MI estimator and evolution strategies (ES)combined with black-box stochastic gradient ascent (SGA) to maximize the MI lower bound. This allows the design process to be achieved through a unified scalable procedure for implicit models without sampling path gradients. Several experiments demonstrate that our approach significantly improves the scalability of BED for implicit models in high-dimensional design space.

Zhang, Jiaxin↗
DOE OSTI2019

Optimal Operator Training Reference Models for Human-in-the-loop Systems

The human operator is an integral part of a stable and safe power system. While there is increasing attention paid to automation improvements, the importance of understanding and training human operators may be understated. This paper discusses a project to enhance operator training programs by evaluating human performance relative to a reference operator model identified using optimal control theory. Along with establishing a simple computer-based operator workstation for future training purpose, this paper describes the optimal control response design methodology for a human-in-the-loop power system experiment. The overall system model is presented. An optimal controller synthesis methodology is applied to the model system and the optimal controller is designed. The performance of the optimal controller is then compared to human subject performance.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Practical and Optimal Sequential Bayesian Experimental Design for Complex Systems Incorporating Human Experimenter Preferences (Final Scientific/Technical Report)

Experiments are indispensable for developing models of complex systems. Carefully designed experiments can provide substantial savings for these expensive data-acquisition opportunities. However, designs based on heuristics are often suboptimal for systems with multiphysics, nonlinear dynamics, and uncertain and noisy environments. Optimal experimental design, while leveraging predictive models, seeks to systematically quantify and maximize the value of experiments. In this project, we focused on the design of multiple experiments, where current approaches are largely suboptimal: batch-design does not adapt to new data acquired during the experiment campaign (no feedback), and greedy/myopic design ignores future dynamics and consequences (no lookahead). We developed the mathematical framework and computational methods for sequential optimal experimental design (sOED) for complex systems. We enabled tractable model-based sOED in a rigorous manner through novel algorithms based on reinforcement learning, and investigated the effects of human experimenters on the design process. Our methods are fully Bayesian, able to quantify and update uncertainty in a principled manner. The traits aimed by our approach—mathematical rigor and optimality, human effects and uncertainty quantification, computational practicality—are crucial for elevating the standards of artificial intelligence (AI) to support decision-making in scientific domains, and contribute toward trust and realistic adoption of AI in experimental design practice.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

ARENA: Adversary-Resistant Evolving Neural Architectures

Neural networks are becoming the cornerstone for national security prediction tasks. However, designing them requires significant research and trial/error, as they have many hyperparameters, including their computation graph (“architecture”). Neural architecture search (NAS) employs secondary optimizers to search for architectures maximizing objectives like accuracy. Evolutionary algorithms (EAs) are the most used class of optimizer for NAS. However, existing Python libraries for writing EAs limit the complexity of experiments a user can design. In this project, we built ARENA, a Python framework that encodes complex, hyper-realistic EAs. ARENA collects detailed information as it runs and is flexible enough to encode non-EA search algorithms. We tested ARENA on 4 toy optimization problems by encoding 3 search algorithms for each—random search, an EA, and simulated annealing. We also designed an EA that performs NAS on the MNIST dataset. Our experiments suggest the potential for immediate mission impact through solving lab-wide optimization problems.

97 MATHEMATICS AND COMPUTING↗