Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical constants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Preparation, Identification, and Low-Temperature Infrared Spectra of Two Elusive Crystalline Nitrile Ices

Infrared (IR) spectra of the alkyl nitrile ices CH3CN and CH3CH2CN are relevant to the study of the low- temperature chemistry of objects within and beyond the Solar System, but the thermodynamically favored low-temperature crystalline phases of these compounds have not been presented and identified in the planetary- sciences literature. Moreover, there is a large variation in the published IR spectra of these two icy solids, including spectra that are used for the analyses of spacecraft data from the Voyager and Cassini missions. Here the IR spectra of the low-temperature crystalline forms of CH3CN and CH3CH2CN, which are the thermody-namically stable phases at Titan temperatures, are presented for the first time with all samples being made by vapor-phase deposition. Conditions are described for producing these ice phases for both compounds, and new measurements are reported of ice density and refractive index, quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, nitrile abundances in extraterrestrial environments. Comparisons are drawn between CH3CN and CH3CH2CN, an earlier prediction on their similar crystallization behaviors is verified, and previous work is examined in light of these new results, including a counter- intuitive observation in which the low-temperature phase of an ice is made by heating a high-temperature phase. Applications and extensions are described.

Hudson, Reggie L.↗
NASA NTRS2019

Preparation, Identification, and Low-Temperature Infrared Spectra of Two Elusive Crystalline Nitrile Ices

Infrared (IR) spectra of the alkyl nitrile ices CH3CN and CH3CH2CN are relevant to the study of the low-temperature chemistry of objects within and beyond the Solar System, but the thermodynamically favored low-temperature crystalline phases of these compounds have not been presented and identified in the planetary-sciences literature. Moreover, there is a large variation in the published IR spectra of these two icy solids, including spectra that are used for the analyses of spacecraft data from the Voyager and Cassini missions. Here the IR spectra of the low-temperature crystalline forms of CH3CN and CH3CH2CN, which are the thermodynamically stable phases at Titan temperatures, are presented for the first time with all samples being made by vapor-phase deposition. Conditions are described for producing these ice phases for both compounds, and new measurements are reported of ice density and refractive index, quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, nitrile abundances in extraterrestrial environments. Comparisons are drawn between CH3CN and CH3CH2CN, an earlier prediction on their similar crystallization behaviors is verified, and previous work is examined in light of these new results, including a counter-intuitive observation in which the low-temperature phase of an ice is made by heating a high-temperature phase. Applications and extensions are described.

Ices, IR spectroscopy, Titan, organic chemistry, i↗
NASA NTRS2018

Propynal, an Interstellar Molecule with an Exceptionally Strong C≡C Infrared Band - Laboratory Infrared Data and Applications

Isomers with the formula C3H2O have intrigued and puzzled astronomers and astrochemists for many years, with propynal and cyclopropenone, but not propadienone, known to be interstellar. However, there is a severe lack of laboratory spectra of the solid phases of these compounds with which to investigate their interstellar chemistry. Here we present the first infrared spectra of amorphous and crystalline forms of propynal, HCC-C(O)H, at multiple temperatures. Band positions are tabulated and band strengths are derived in terms of absorption coefficients and integrated intensities. Optical constants are calculated for amorphous propynal, refractive indices are measured, and densities are estimated. Three laboratory astrochemistry applications are described, including a new spectral identification in an earlier paper. It is shown that propynal's C≡C infrared absorbance is about 30,000% stronger than the corresponding feature in acetylene. This band's intensity and spectral position make it an attractive candidate for astronomical searches involving interstellar ices.

astrochemistry – ISM: molecules↗
NASA NTRS2018

Propynal, an Interstellar Molecule with an Exceptionally Strong C≡C Infrared Band - Laboratory Infrared Data and Applications

Isomers with the formulaC3H2Ohave intrigued and puzzled astronomers and astrochemists for many years, with propynal and cyclopropenone, but not propadienone, known to be interstellar. However, there is a severe lack of laboratory spectra of the solid phases of these compounds with which to investigate their interstellar chemistry. Here we present the first infrared spectra of amorphous and crystalline forms of propynal, HCC C(O)H, at multiple temperatures. Band positions are tabulated and band strengths are derived in terms of absorption coefficients and integrated intensities. Optical constants are calculated for amorphous propynal, refractive indices aremeasured, and densities are estimated. Three laboratory astrochemistry applications are described, including a new spectral identification in an earlier paper. It is shown that propynal’s C C infrared absorbance is about 30 000 per cent stronger than the corresponding feature in acetylene. This band’s intensity and spectral position make it an attractive candidate for astronomical searches involving interstellar ices.

astrochemistry – ISM: molecules↗
NASA NTRS2017

IR Spectra and Properties of Solid Acetone, an Interstellar and Cometary Molecule

Mid-infrared spectra of amorphous and crystalline acetone are presented along with measurements of the refractive index and density for both forms of the compound. Infrared band strengths are reported for the first time for amorphous and crystalline acetone, along with IR optical constants. Vapor pressures and a sublimation enthalpy for crystalline acetone also are reported. Positions of 13C-labeled acetone are measured. Band strengths are compared to gas-phase values and to the results of a density-functional calculation. A 73% error in previous work is identified and corrected.

IR spectroscopy, band strengths, astrochemistry, a↗
NASA NTRS2020

Propanal, an Interstellar Aldehyde - First Infrared Band Strengths and Other Properties of the Amorphous and Crystalline Forms

Chemical evolution in molecular clouds in the interstellar medium is well established, with the identification of over 200 molecules and molecular ions. Among the classes of interstellar organic compounds found are the aldehydes. However, laboratory work on the aldehydes has scarcely kept pace with astronomical discoveries as little quantitative solid-phase infrared (IR) data has been published on any of the aldehydes, and the same is true for important properties such as density, refractive indices, and vapor pressures. In this paper we examine the IR spectra of solid propanal (HC(O)CH2CH3, propionaldehyde), along with several physical properties, for both the amorphous and crystalline forms of the compound. The quantitative measurements we report, such as infrared intensities and optical constants, will be useful in laboratory investigations of the formation and evolution of propanal-containing ices, will serve as benchmark data for theoretical investigations, and will inform observational studies.

Yukiko Yagi Yarnall↗
NASA NTRSDate not supplied

On the Importance of Laboratory Astrophysics and Astrochemistry and Interdisciplinary Research: Two Success Stories

Here we present two examples that demonstrate how cross-disciplinary research projects, where experimentalists, modelers and observers work together to answer science questions, allow expertise to be shared and misconceptions or missing key elements to be tackled by looking at the problem from different perspectives. They also show how, by working in unison, the group can accomplish more than the sum of its parts by combining results into a higher-level understanding of the chemical processes taking place. The first project is a collaborative study between experimentalists, modelers and observers to1) produce laboratory analogs of cosmic grains and planetary aerosols (Titan, Pluto...) from different gas mixtures in cold astrophysically relevant conditions (<200 K); and 2) characterize them with scanning electron microscopy and visible-to-far-infrared spectroscopy in order to assess the impact of the precursors on their growth structure and optical properties. We can then produce and study analogs that are representative of different formation stages or environments, and provide their complex refractive indices to the scientific community. We will show how, by using these experimental optical constants of more representative analogs in radiative transfer and reflectance spectra models, better interpretations of (exo)planetary atmosphere- and surface observations are possible. The second project is an interdisciplinary study of the formation of benzene clouds in the atmosphere of Saturn’s largest moon, Titan. We will show how combining Earth and Planetary Science laboratory expertise, modeling and observations has led to providing to the scientific community, for the first time, experimental vapor pressures for benzene at cold temperatures(<200K) relevant to Titan’s atmospheric conditions. These have been used in microphysical models instead of the higher temperature extrapolations used previously, allowing a better match to observations.

Ella Sciamma-o'Brien↗
NASA NTRSDate not supplied

Low-Temperature Production of Cosmic Grains Analogs From Gas-Phase Molecular Precursors with the NASA Ames' COSmIC Facility

Complex carbon molecules and ions are ubiquitous in space and form the building blocks of carbonaceous cosmic dust grains, ultimately contributing to the formation of planets. Here, we report the first experimental investigations of the low temperature chemical pathways leading to the production of cosmic grain analogs from gas phase molecular precursors in order to better understand the evolution of cosmic carbon. The experiments were performed using the COsmic SImulation Chamber (COSmIC) to generate and characterize grains formed from gas phase precursors under controlled conditions representative of astrophysical environments [1]. Using COSmIC, it is possible to investigate the evolution of cosmic carbon from the formation of neutral and ionized gas phase hydrocarbons and PAHs [2], to carbon grains [3, 4]. This is achieved by using a discharge nozzle to (1) produce an adiabatic jet expansion and cool down Ar-hydrocarbon/PAH gas mixtures to astrophysically relevant temperature (150 K) before inducing chemistry by generating a plasma discharge in the stream of the expansion. This plasma-induced chemistry results in the formation of complex molecules and solid particles, analogs of cosmic grains. Solid grains are produced in-situ in the plasma expansion, carried by the accelerated gas in the expansion, and collected on substrates placed a few centimeters downstream of the electrodes. The results of a preliminary solid phase ex-situ analysis of cosmic grain analogs produced at low temperature in COSmIC from gas mixtures including molecular precursors of cosmic carbon grains, i.e., such as CH4 and C2H2 found in circumstellar ejecta of late C stars [3] as well as PAHs ubiquitously detected in IR emission bands seen in galactic and extragalactic environments [4] will be discussed. Scanning Electron Microscopy imaging was used to provide insight on the morphology and growth structure of the grains produced in COSmIC, and to investigate how the precursors used to produce the grains affect these parameters [3]. Laser desorption mass spectrometry was used to identify the molecules making up the main structures within the condensed grains [4]. NIR to FIR optical properties are characterized to provide critical information (functional groups, optical constants) to the scientific community, for use in radiative transfer models in particular, and to help decipher and enhance the return data from space observations.

F. Salama↗
NASA NTRS2021

In Situ Performance of the Low Frequency Array for Advanced ACTPol

The Advanced Atacama Cosmology Telescope Polarimeter (AdvACT) is an upgrade for the Atacama Cosmology Telescope using Transition Edge Sensor (TES) detector arrays to measure cosmic microwave background (CMB) temperature and polarization anisotropies in multiple frequencies. The low frequency (LF) array was deployed early 2020. It consists of 292 TES bolometers observing in two bands centered at 27 GHz and 39 GHz. At these frequencies, it is sensitive to synchrotron radiation from our galaxy as well as to the CMB, and complements the AdvACT arrays operating at 90, 150 and 230 GHz. We present the initial LF array on-site characterization, including the time constant, optical efficiency and array sensitivity.

Superconducting detectors↗
NASA NTRSDate not supplied

Enhanced Far Ultra-Violet Optical Properties of Physical Vapor Deposited Aluminum Mirrors Through Fluorination

Astronomical instrumentation for measurements in the Far Ultra-Violet (FUV, 90-200 nm) typically use aluminum (Al) thin films due to their high reflectance over this wavelength range. However, the native aluminum oxide layer that forms on Al upon exposure to the atmosphere is strongly absorbing in this wavelength range, requiring that the films be protected with a dielectric that inhibits oxidation. Typically, magnesium fluoride (MgF 2 ) or lithium fluoride (LiF) coatings are used as protective layers, but each has shortcomings. For example, MgF 2 has an absorption cutoff at 115 nm reducing performance in a critical part of the FUV spectrum of observational interest. A viable option to access these lower wavelengths could be the use of the LiF overcoat as it has a lower absorption cutoff at 102.5 nm, but it is hygroscopic and thus susceptible to degradation in humid conditions. An approach to reduce the hygroscopic nature of LiF would be to implement a passivation process during the deposition of both Al+LiF coatings. Our team at GSFC has developed a new reactive Physical Vapor Deposition (rPVD) process that consists of a fluorination process with XeF 2 gas combined with our traditional PVD process. We have found that this new rPVD coating process offers a protected version of Al+LiF with a more environmentally stable and more transparent LiF layer, along with unprecedent reflectivity. The process starts with a bare optically smooth substrate that is coated with Al in an ultra-high vacuum (UHV) chamber by the conventional PVD process. Then, the bare Al mirror is immediately exposed to a reactive XeF 2 gas before and after the application of the flash PVD evaporated LiF layer. We have also been investigating the use of this rPVD coating process for potential efficiency enhancements of Si-based gratings. Since it is known that the XeF 2 vapor is a strong Si etchant, we are investigating if the native SiO 2 layer on Si is sufficient to protect the groove profile of e-beam-ruled Si gratings from degradation. We will report on the characterization of various Al+LiF witness mirror coatings (both on borosilicate and Si) performed under various deposition conditions using the XeF 2 passivation process. These tests include XPS to determine film stoichiometry and AFM/SEM to measure surface roughness and any etching on the Si substrate. We will also report on FUV reflectance and spectroscopic ellipsometry to characterize optical constants of these passivated films in the UV/Visible/NIR spectral ranges.

Engineering (General)↗
NASA NTRSDate not supplied

Enhanced Far Ultra-Violet Optical Properties of Physical Vapor Deposited Aluminum Mirrors Through Fluorination

Astronomical instrumentation for measurements in the Far Ultra-Violet (FUV, 90-200 nm) typically use aluminum (Al) thin films due to their high reflectance over this wavelength range. However, the native aluminum oxide layer that forms on Al upon exposure to the atmosphere is strongly absorbing in this wavelength range, requiring that the films be protected with a dielectric that inhibits oxidation. Typically, magnesium fluoride (MgF 2 ) or lithium fluoride (LiF) coatings are used as protective layers, but each has shortcomings. For example, MgF 2 has an absorption cutoff at 115 nm reducing performance in a critical part of the FUV spectrum of observational interest. A viable option to access these lower wavelengths could be the use of the LiF overcoat as it has a lower absorption cutoff at 102.5 nm, but it is hygroscopic and thus susceptible to degradation in humid conditions. An approach to reduce the hygroscopic nature of LiF would be to implement a passivation process during the deposition of both Al+LiF coatings. Our team at GSFC has developed a new reactive Physical Vapor Deposition (rPVD) process that consists of a fluorination process with XeF 2 gas combined with our traditional PVD process. We have found that this new rPVD coating process offers a protected version of Al+LiF with a more environmentally stable and more transparent LiF layer, along with unprecedent reflectivity. The process starts with a bare optically smooth substrate that is coated with Al in an ultra-high vacuum (UHV) chamber by the conventional PVD process. Then, the bare Al mirror is immediately exposed to a reactive XeF 2 gas before and after the application of the flash PVD evaporated LiF layer. We have also been investigating the use of this rPVD coating process for potential efficiency enhancements of Si-based gratings. Since it is known that the XeF 2 vapor is a strong Si etchant, we are investigating if the native SiO 2 layer on Si is sufficient to protect the groove profile of e-beam-ruled Si gratings from degradation. We will report on the characterization of various Al+LiF witness mirror coatings (both on borosilicate and Si) performed under various deposition conditions using the XeF 2 passivation process. These tests include XPS to determine film stoichiometry and AFM/SEM to measure surface roughness and any etching on the Si substrate. We will also report on FUV reflectance and spectroscopic ellipsometry to characterize optical constants of these passivated films in the UV/Visible/NIR spectral ranges.

Engineering (General)↗
NASA NTRS2024

Sublimation and Infrared Spectral Properties of Ammonium Cyanide

The ammonium ion (NH 4 + ) has been suggested to be present in interstellar ices and has been observed on the surfaces of planetary bodies using infrared (IR) spectroscopy as the primary means of identification. Evidence for several ammonium salts has also been found in the dust and surface ices of comet 67P/Churyumov-Gerasimenko. Here we present a laboratory study of ammonium cyanide (NH 4 CN) and report on several properties of this compound, measured with higher accuracy than in previous reports, including its IR band strengths and optical constants for use in quantifying its abundance in interstellar and planetary ices. We also report the first measurements since 1882 of NH 4 CN vapor pressures, sublimation fluxes, and sublimation enthalpy measured at temperatures relevant to subliming cometary ices (134–155 K). The density and refractive index of NH 4 CN at 125 K and the sublimation enthalpy and vapor pressures of NH 3 at ~100 K are also reported.

Ices↗
NASA NTRSDate not supplied

Enhanced Far Ultra-Violet Optical Properties of Physical Vapor Deposited Aluminum Mirrors Through Fluorination

Astronomical instrumentation for measurements in the Far Ultra-Violet (FUV, 90-200 nm) typically use aluminum (Al) thin films due to their high reflectance over this wavelength range. However, the native aluminum oxide layer that forms on Al upon exposure to the atmosphere is strongly absorbing in this wavelength range, requiring that the films be protected with a dielectric that inhibits oxidation. Typically, magnesium fluoride (MgF 2 ) or lithium fluoride (LiF) coatings are used as protective layers, but each has shortcomings. For example, MgF 2 has an absorption cutoff at 115 nm reducing performance in a critical part of the FUV spectrum of observational interest. A viable option to access these lower wavelengths could be the use of the LiF overcoat as it has a lower absorption cutoff at 102.5 nm, but it is hygroscopic and thus susceptible to degradation in humid conditions. An approach to reduce the hygroscopic nature of LiF would be to implement a passivation process during the deposition of both Al+LiF coatings. Our team at GSFC has developed a new reactive Physical Vapor Deposition (rPVD) process that consists of a fluorination process with XeF 2 gas combined with our traditional PVD process. We have found that this new rPVD coating process offers a protected version of Al+LiF with a more environmentally stable and more transparent LiF layer, along with unprecedent reflectivity. The process starts with a bare optically smooth substrate that is coated with Al in an ultra-high vacuum (UHV) chamber by the conventional PVD process. Then, the bare Al mirror is immediately exposed to a reactive XeF 2 gas before and after the application of the flash PVD evaporated LiF layer. We have also been investigating the use of this rPVD coating process for potential efficiency enhancements of Si-based gratings. Since it is known that the XeF 2 vapor is a strong Si etchant, we are investigating if the native SiO 2 layer on Si is sufficient to protect the groove profile of e-beam-ruled Si gratings from degradation. We will report on the characterization of various Al+LiF witness mirror coatings (both on borosilicate and Si) performed under various deposition conditions using the XeF 2 passivation process. These tests include XPS to determine film stoichiometry and AFM/SEM to measure surface roughness and any etching on the Si substrate. We will also report on FUV reflectance and spectroscopic ellipsometry to characterize optical constants of these passivated films in the UV/Visible/NIR spectral ranges.

Engineering (General)↗
NASA NTRS1986

Lidar method of measurement of atmospheric extinction and ozone profiles

A description of a method of measurement of atmospheric extinction and of ozone profiles by use of the backscatter signal from a monostatic lidar is given. The central feature of the procedure involves a measurement of the ratio of the Raman backscatter returns of both the oxygen and nitrogen atmospheric content. Because the ratio of the number density of both species is known to high accuracy, the measurement itself becomes a measure of the ratio of two transmissions to altitude along with a ratio of the two system constants. The calibration measurement for determining the value of the ratio of the two system constants or electro-optical conversion constants is accomplished by a lidar measurement of identical atmospheric targets while at the same time interchanging the two optical filters in the two optical channels of the receiver. More details of the procedure are discussed. Factoring this calibrated value into the measured O2/N2 profile ratio provides a measured value of the ratio of the two transmissions. Or equivalently, it provides a measurement of the difference of the two extinction coefficients at the O2 and N2 Raman wavelengths as a function of the height.

Cooney, J. A.↗
NASA NTRS1973

Thermomagnetic recording and magneto-optic playback system having constant intensity laser beam control

A system is developed for maintaining the intensity of a laser beam at a constant level in a thermomagnetic recording and magneto-optic playback system in which an isotropic film is heated along a continuous path by the laser beam for recording. As each successive area of the path is heated locally to the vicinity of its Curie point in the presence of a controlled magnetic field, a magneto-optic density is produced proportional to the amplitude of the controlled magnetic field. To play back the recorded signal, the intensity of the laser beam is reduced and a Faraday or Kerr effect analyzer is used, with a photodetector, as a transducer for producing an output signal.

Lewicki, G. W.↗
NASA NTRS1986

A model for the kinetics of a solar-pumped long path laser experiment

A kinetic model for a solar-simulator pumped iodine laser system is developed and compared to an experiment in which the solar simulator output is dispersed over a large active volume (150 cu cm) with low simulator light intensity (approx. 200 solar constants). A trace foreign gas which quenches the upper level is introduced into the model. Furthermore, a constant representing optical absorption of the stimulated emission is introduced, in addition to a constant representing the scattering at each of the mirrors, via the optical cavity time constant. The non-uniform heating of the gas is treated as well as the pressure change as a function of time within the cavity. With these new phenomena introduced into the kinetic model, a best reasonable fit to the experimental data is found by adjusting the reaction rate coefficients within the range of known uncertainty by numerical methods giving a new bound within this range of uncertainty. The experimental parameters modeled are the lasing time, laser pulse energy, and time to laser threshold.

Stock, L. V.↗
NASA NTRS1992

Measurement of the magnetic anisotropy energy constants for magneto-optical recording media

Measurement of the magneto-optical polar Kerr effect is performed on rare earth-transition metal (RE-TM) amorphous films using in-plane fields. From this measurement and the measurement of the saturation magnetization using a vibrating sample magnetometer (VSM), the magnetic anisotropy constants are determined. The temperature dependence is presented of the magnetic anisotropy in the range of -175 to 175 C. The results show a dip in the anisotropy near magnetic compensation. This anomaly is explained based on the finite exchange coupling between the rare earth and transition metal subnetworks.

Hajjar, R. A.↗