Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Mechanistic Studies of the Oxidation of Cyclohexene to 2-Cyclohexen-1-one over ALD Prepared Titania Supported Vanadia

Selective oxidation of cyclohexene to 2-cyclohexen-1-one over titania supported vanadia (VO x /TiO 2 ) has been studied using temperature dependent in-situ FTIR spectroscopy in both the presence and absence of oxygen. The VO x /TiO 2 samples were prepared using one atomic layer deposition (ALD) cycle and characterized by Raman spectroscopy. In-situ FTIR data for the oxidation of cyclohexene and perdeuterocyclohexene allow for the formulation of a molecular level reaction mechanism, which is initiated by the transfer of an allyl hydrogen. Oxidation of perdeuterocyclohexene provides a direct probe of the formation of OD and HDO moieties that support the involvement of specific steps in the proposed mechanism. The presence of gas phase oxygen does not lead to a change in the products versus anaerobic conditions. However, gas phase oxygen is significantly incorporated in the CO 2 over-oxidation product above ~250 °C. Data were also obtained with cyclohexene epoxide as the reactant in an effort to determine whether there is a parallel reaction pathway, which is initiated by C=C activation in cyclohexene, that involves cyclohexene epoxide as an intermediate. Furthermore, though a minor pathway involving a cyclohexene epoxide intermediate cannot be ruled out, these data demonstrate that, under experimental conditions, the dominant pathway from cyclohexene to cyclohexene-1-one is initiated by an allyl-H activation step and does not involve an epoxide intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Regeneration of Active Surface Alloys during Cyclic Oxidation and Reduction: Oxidation of H 2 on Pd/Ag(111)

The surface morphology and composition of a catalyst during excursions between oxidizing and reducing conditions can change substantially, especially in bimetallic alloys. Both thermodynamic and kinetic factors play a role in determining the properties of alloy surfaces where the active phase may be a metastable state. Previously, Ag oxide reduction was shown to be dramatically enhanced when Pd is on the surface; however, Pd is more stable when dissolved in Ag, raising the question as to whether a highly active Pd surface state will persist over multiple reaction cycles—a requirement for catalytic function. Experiments herein demonstrate that the enhanced chemical functionality due to the presence of Pd on the surface is retained, based on the enhanced rate of silver oxide reduction over multiple oxidation/reduction cycles for a Pd/Ag(111) model. Repeated oxidation and reduction promote PdAg alloying and reversible structural and compositional changes are detected using X-ray photoelectron spectroscopy. Furthermore, this study establishes that metastable phases can persist in reactive processes on surfaces, indicating their potential in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Highly Oxidized Oxide Surface toward Optimum Oxygen Evolution Reaction by Termination Engineering

The oxygen evolution reaction (OER) is a critical step for sustainable fuel production through electrochemistry process. Maximizing active sites of nanocatalyst with enhanced intrinsic activity, especially the activation of lattice oxygen, is gradually recognized as the primary incentive. Since the surface reconfiguration to oxyhydroxide is unavoidable for oxygen-activated transition metal oxides, developing a surface termination like oxyhydroxide in oxides is highly desirable. In this work, we demonstrate an unusual surface termination of (111)-facet Co 3 O 4 nanosheet that is exclusively containing edge-sharing octahedral Co 3+ similar to CoOOH that can perform at approximately 40 times higher current density at 1.63 V (vs RHE) than commercial RuO 2 . It is found that this surface termination has an oxidized oxygen state in contrast to standard Co-O systems, which can serve as active site independently, breaking the scaling relationship limit. Finally, this work forwards the applications of oxide electrocatalysts in the energy conversion field by surface termination engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Electrothermal Modeling and Analysis of Gallium Oxide Power Switching Devices: Preprint

Gallium oxide is an emerging wide band-gap material that has the potential to penetrate the power electronics market in the near future. In this paper, a finite-element gallium oxide semiconductor model is presented that can predict the electrical and thermal characteristics of the device. The finite element model of the two-dimensional device architecture is developed inside the Sentaurus environment. A vertical FinFET device architecture is employed to assess the device's behavior and its static and dynamic behavior. Enhancement-mode device operation is realized with this type of device architecture without the need for any selective area doping. The dynamic thermal behavior of the device is characterized through its short-circuit behavior. Based on the device static and dynamic behavior, it is envisioned that reliable vertical transistors can be fabricated for the power electronics applications.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2018

Radiothermoluminescence of Oxide Nanostructures on Surfaces of Radiation-Oxidized Aluminum and Beryllium

The formation dynamics of oxide nanostructures on surfaces of oxidized aluminum and beryllium with water at room temperature and under radiation action has been studied by the radiothermoluminescence method. The role of intermediate surface active particles in the dynamics of changes of the oxidation process of aluminum and beryllium in an absorbed dose range of 0.5–120 kGy has been considered. It is established that, when nanostructure films are formed, molecular oxygen and other oxygen-containing ion-radical groups generated by γ irradiation play the main role. The radiation-oxidation kinetics of aluminum and beryllium is studied, and their chemisorption passivation is revealed. A possible mechanism of this process is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2014

Determination of Ammonia Oxidizing Bacteria and Nitrate Oxidizing Bacteria in Wastewater and Bioreactors

The process of water purification has many different physical, chemical, and biological processes. One part of the biological process is the task of ammonia oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB). Both play critical roles in the treatment of wastewater by oxidizing toxic compounds. The broad term is nitrification, a naturally occurring process that is carried out by AOB and NOB by using oxidation to convert ammonia to nitrite and nitrite to nitrate. To monitor this biological activity, bacterial staining was performed on wastewater contained in inoculum tanks and biofilm samples from bioreactors. Using microscopy and qPCR, the purpose of this experiment was to determine if the population of AOB and NOB in wastewater and membrane bioreactors changed depending on temperature and hibernation conditions to determine the optimal parameters for AOB/NOB culture to effectively clean wastewater.

Bioreactors↗
DOE OSTI2017

Inhibiting Metal Oxide Atomic Layer Deposition: Beyond Zinc Oxide

The atomic layer deposition (ALD) of several metal oxides is selectivity inhibited on alkanethiol self-assembled monolayers (SAMs) on Au and the eventual nucleation mechanism is investigated. The inhibition ability of the SAM is significantly improved by the in situ H 2 -plasma pretreatment of the Au substrate prior to gas-phase deposition of a long-chain alkanethiol, 1-dodecanethiol (DDT). This more rigorous surface preparation inhibits even aggressive oxide ALD precursors, including trimethylaluminum and water, for at least 20 cycles. We study the effect that ALD precursor purge times, growth temperature, alkanethiol chain length, alkanethiol deposition time, and plasma treatment time have on Al 2 O 3 ALD inhibition. This is the first example of Al 2 O 3 ALD inhibition from a vapor-deposited SAM. Inhibition of Al 2 O 3 , ZnO, and MnO ALD processes are compared, revealing the versatility of this selective surface treatment. As a result, atomic force microscopy (AFM) and grazing incidence x-ray fluorescence (GIXRF) further reveals insight into the mechanism by which the well-defined surface chemistry of ALD may eventually be circumvented to allow metal oxide nucleation and growth on SAM-modified surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Porogen‐Integrated Rapid Oxidation Enables Structured Mesoporous Metal Oxide Films

Structured metal oxide films have promise in optoelectronics, sensing, energy storage, and catalysis but their uptake is predominately limited due to their long and high‐temperature syntheses. Here, in this study, a self‐assembling polymer is used which can act as a chelating fuel source in a solution combustion reaction to generate highly structured mesoporous aluminum oxide films at <250 °C in a matter of minutes through a process termed porogen‐integrated rapid oxidation (PiRO). The resulting films with thicknesses up to 500 nm show an open‐cell, face‐centered cubic structure of spheroidal pores. Further, an additional ligand can be included to control the self‐assembly step to yield both through‐film ordering or tunable disordering for increased pore volume as confirmed by both grazing incidence small angle X‐ray scattering and ellipsometry. Finally, roll‐to‐roll manufacturing with PiRO is demonstrated on flexible polymeric substrates. The method offers a tunable, scalable, low‐temperature, and lower‐cost method to generate large‐area structured mesoporous metal oxide films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Iridium Oxide Coordinatively Unsaturated Active Sites Govern the Electrocatalytic Oxidation of Water

A special membrane electrode assembly to measure operando X-ray absorption spectra and resonant photoemission spectra of mesoporous templated iridium oxide films is used. These films are calcined to different temperatures to mediate the catalyst activity. By combining operando resonant photoemission measurements of different films with ab initio simulations these are able to unambiguously distinguish µ 2 -O (bridging oxygen) and µ 1 -O (terminal oxygen) in the near-surface regions of the catalysts. The intrinsic activity of iridium oxide scales with the formation of µ1-O (terminal oxygen) is found. Importantly, it is shown that the peroxo species do not accumulate under reaction conditions. Rather, the formation of µ 1 -O species, which are active in O-O bond formation during the OER, is the most oxidized oxygen species observed, which is consistent with an O-O rate-limiting step. Thus, the oxygen species taking part in the electrochemical oxidation of water on iridium electrodes are more involved and complex than previously stated. This result highlights the importance of employing theory together with true and complementary operando measurements capable of probing different aspects of catalysts surfaces during operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Heterogeneous Fe‐N‐C Cocatalyst for Hydroquinone Oxidation Enables Aerobic Oxidation of Primary Alcohols to Aldehydes

Abstract Benzoquinone (BQ) is commonly used as a cocatalyst in multi‐component catalyst systems for aerobic oxidation of organic molecules. Such methods often proceed by a redox cascade in which a secondary catalyst supports aerobic oxidation of hydroquinone (HQ) to BQ. The present study shows that a commercially available non‐precious metal heterogeneous catalyst, PAJ‐Fe‐N‐C, is much more efficient than established homogeneous catalysts for aerobic oxidation of HQ to BQ, and this improved reactivity is crucial to support aerobic oxidation of primary alcohols to aldehydes with the homogeneous iridium catalyst, [Ir(trop 2 DAD]OTf (trop 2 DAD= N , N ‐bis(5‐ H ‐dibenzo[ a , d ]cycloheptene‐5‐yl)‐1,4‐diazabuta‐1,3‐diene). The combination of this heterogeneous/homogeneous catalyst system operates with Ir catalyst loadings as low as 0.05 mol % and turnover frequencies ≥350 h −1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface Analysis Insight Note: Observations relating to photoemission peak shapes, oxidation state, and chemistry of titanium oxide films

It is common practice to describe the coordination of metal atoms in a binding configuration with their nearest neighbors in terms of oxidation state, a measure by which the number of electrons redistributed between atoms forming chemical bonds. In XPS terms, change to an oxidation state is commonly inferred by correlating photoemission signal with binding energy. The assumption, when classifying photoemission signals into distinct spectral shapes, is that a distribution of intensities shifted to lower binding energy is evidence of a reduction in oxidation state. In this Insight note, we raise the prospect that changes in photoemission peak shape may occur without obvious changes, determined by XPS in stoichiometry for a material. It is well known that TiO 2 measured by XPS yields reproducible Ti 2p photoemission peaks. However, on exposing TiO 2 to ion beams, Ti 2p photoemission evolves to complex distributions in intensity, which are particularly difficult to analyze by traditional fitting of bell-shaped curves to these data. For these reasons, in this Insight note, a thin film of TiO 2 deposited on a silicon substrate is chosen for analysis by XPS and linear algebraic techniques. Alterations in spectral shapes created from modified TiO 2 , which might be interpreted as the change in oxidation state, are assessed in terms of relative proportions of titanium to oxygen. It is found through detailed analysis of spectra that quantification by XPS, using procedures routinely used in practice, is not in accord with the typical interpretations of photoemission shapes. The data processing methods used and results presented in this work are of particular relevance to elucidating fundamental phenomena governing the surface evolution of materials-enabled energy processes where cyclic/non-steady usage changes the nature of bonding, especially in the presence of contaminants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Influence of thermal treatment on structure and catalytic performance of ceria-zirconia supported copper oxide (CuO x /Ce y Zr 1-y O 2 ) catalysts for CO oxidation

Copper oxide (CuO x ) supported on ceria-zirconia (Ce y Zr 1-y O 2 , y = 1.0, 0.5, 0.0) catalysts were investigated to elucidate the effects of thermal treatment on their physicochemical properties and catalytic performance in carbon monoxide (CO) oxidation. Here, the catalysts were synthesized via a one-pot chemical vapor deposition (OP-CVD) method at 700˚C and 900˚C with controlled Cu loading. Characterization techniques, including synchrotron X-ray diffraction (S-XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma spectroscopy (ICP), and N 2 adsorption-desorption, were implemented to probe the crystalline structure, molecular and electronic structure, oxygen vacancies, specific surface area (SSA) and metal loading. CO oxidation was chosen as a model reaction to explore the structure-catalytic performance relationship. A ∼100% CO conversion was achieved at < 150˚C, particularly with the CuO x /CeO 2 catalyst calcined at 700˚C. In contrast, calcination at 900˚C caused a ∼90% decrease in SSA and a ∼24% increase in T 50 . Activity tests revealed that increasing ZrO 2 content lowered CO oxidation activity despite generating more defect sites. In-situ measurement of the 700 °C calcined samples revealed the presence of stable and unstable defects in CuO x /Ce 0.5 Zr 0.5 O 2 and CeO 2 respectively, which play a key role in the activity of the catalysts. The results highlight that catalytic performance is closely related to the SSA. Furthermore, an optimum calcination temperature favor significant oxygen vacancy formation with required CuO x -support interactions, enhancing redox properties and catalytic performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Oxidative Deboronation of Boronic Acids by Hydrogen Peroxide in Planta Generates Borate for Cross-Linking of Rhamnogalacturonan II

Vascular plants require boron to cross-link the rhamnogalacturonan-II (RG-II) domain of pectin to form functional cell walls. Boronic acids, which form reversible esters with cis-diols like borate, have been proposed to influence RG-II cross-linking, though the mechanism remains unclear. We used suspension-cultured rose cells adapted to grow without boron to investigate the effect of boronic acids on RG-II dimerization. When grown with phenylboronic acid (PBA) as the sole boron source, nearly all RG-II was crosslinked, whereas methylboronic acid (MBA) only partially restored cross-linking. In contrast, in vitro assays showed that homogeneous RG-II monomers did not dimerize with alkyl or aryl boronic acids unless supplemented with hydrogen peroxide (H2O2), which oxidatively converts boronic acids to boric acid. Real-time NMR spectroscopy and density functional theory calculations provided insight into the reaction mechanism and energetics of oxidation respectively. Together, our data show that exogenous boronic acids are a source of boric acid for plants, and that the deboronation reaction generates aryl or alkyl alcohol byproducts that can undergo further chemical modification in planta. The fate and potential roles of these byproducts in planta remain to be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Distinguishing interfacial double layer and oxide-based capacitance on gold and pre-oxidized Fe-Cr in 1-ethyl-3-methylimidazolium methanesulfonate room temperature ionic liquid aqueous mixture

The frequency-dependent impedance of a metal/oxide/room temperature ionic liquid (RTIL) interface was separated into oxide layer (C ox ) and double layer (C dl ) capacitances using electrochemical impedance spectroscopy (EIS). A pre-formed oxide of known initial thickness on Fe-20 at.% Cr was investigated in 1-ethyl-3-methylimidazolium methanesulfonate ([Emim][MeSO 3 ]) RTIL + aqueous mixtures. The oxide thickness was calculated from C ox using the complex capacitance representation and the power-law model. The result was additionally verified by cross-sectional analysis using transmission electron microscopy. The C dl calculated from the constant-phase element (CPE) was distinguishable from C ox for Fe-20Cr, which enables monitoring of the interfaces of structural metals with oxide layers in RTILs containing water.

Constant-phase element↗
DOE OSTI2019

A proteome-wide assessment of the oxidative stress paradigm for metal and metal-oxide nanomaterials in human macrophages

Responsible implementation of engineered nanomaterials (ENMs) into commercial applications is an important societal issue, driving demand for new approaches for rapid and comprehensive evaluation of their bioactivity and safety. An essential part of any research focused on identifying potential hazard of ENMs is the appropriate selection of biological endpoints to evaluate. Herein, we use a tiered strategy employing both targeted biological assays and untargeted quantitative proteomics to elucidate the biological responses of human macrophages across a library of metal/metal oxide ENMs, raised as priority ENMs for investigation by NIEHS’s Nanomaterial Health Implications Research (NHIR) program. Our results show that quantitative cellular proteome profiles readily distinguish ENM types based on their cytotoxic potential according to induction of biological processes and pathways involved in the cellular antioxidant response, TCA cycle, oxidative stress, endoplasmic reticulum stress, and immune responses as major processes impacted. Interestingly, pathway analysis of differentially abundant proteins also revealed new cell processes that were influenced by all ENMs independent of cytotoxic potential. These included pathways previously implicated as cellular adaptive mechanisms to low levels of oxidative stress, including cell adhesion, protein translation and protein targeting pathways. Unsupervised clustering of all data revealed the most striking proteome changes that differentiated ENM classes involved a small subset of proteins involved in the oxidative stess response (HMOX1), protein chaperone functions (HS71B, DNJB1), and autophagy (SQSTM), providing a potential new panel of markers of ENM-induced cell stress. To our knowledge, the results represent the most comprehensive profiling of the biological responses to a library of ENMs conducted using quantitative mass spectrometry-based proteomics. The results provide a basis to identify the patterns of a diverse set of cellular pathways and cell processes impacted by ENM exposure in an important immune cell type, laying the foundation for multivariate, pathway-level structure activity assessments of ENMs in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Tuning the activity of Cu-containing rare earth oxide catalysts for CO oxidation reaction: Cooling while heating paradigm in microwave-assisted synthesis

Highlights: • Organic chemistry synthesis concepts have been smartly tailored to catalysts’ development. • Enhanced microwave synthesis of (Ce-La-10Cu)O{sub 2} led to an one phase system. • CO{sub 2}-philicity, and oxygen vacancies can be tuned by synthesis. • Coupling microwave with air cooling led to T{sub 50} decrease by 32% in the CO oxidation reaction. - Abstract: (Ce-La-xCu)O{sub 2} catalysts with low (3 at.%) and high (10 at.%) Cu content were prepared by conventional microwave (MW) and enhanced microwave methods where air cooling (AC), while heating, was applied. The catalysts were tested for the CO oxidation reaction in the 25–500 °C range using 4%CO/20%O{sub 2}/He feed gas. Varying spectroscopic, microscopic and catalytic studies were used to probe the effect of synthesis on the nanostructure and the CO oxidation performance. It was found that the synthesis method adopted impacts on the extent of the Cu doping into the (Ce-La)O{sub 2} fluorite lattice, hence leading to one and two phases system in the case of catalyst prepared through enhanced (AC) and conventional (MW) microwave methods, respectively. Furthermore, only Ce{sup 4+} species were found on the surface of the (Ce-La-10Cu)O{sub 2} catalysts synthesized using MW and AC (XPS studies), whereas oxygen vacant sites which are associated with Ce{sup 3+} ions were indicated in the sub-surface/bulk (Raman studies). Ultimately, the catalysts with the low and high Cu loading, prepared under the AC-promoted microwave method, presented a superior performance against CO oxidation, exhibiting an overall improvement of the catalytic activity by 16% and 32%, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗