Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Numerical solutions of 3-dimensional Navier-Stokes equations for closed bluff-bodies

The Navier-Stokes equations are solved numerically. These equations are unsteady, compressible, viscous, and three-dimensional without neglecting any terms. The time dependency of the governing equations allows the solution to progress naturally for an arbitrary initial guess to an asymptotic steady state, if one exists. The equations are transformed from physical coordinates to the computational coordinates, allowing the solution of the governing equations in a rectangular parallelepiped domain. The equations are solved by the MacCormack time-split technique which is vectorized and programmed to run on the CDc VPS 32 computer. The codes are written in 32-bit (half word) FORTRAN, which provides an approximate factor of two decreasing in computational time and doubles the memory size compared to the 54-bit word size.

Abolhassani, J. S.↗

Comments on numerical solution of boundary value problems of the Laplace equation and calculation of eigenvalues by the grid method

The mathematics involved in numerically solving for the plane boundary value of the Laplace equation by the grid method is developed. The approximate solution of a boundary value problem for the domain of the Laplace equation by the grid method consists of finding u at the grid corner which satisfies the equation at the internal corners (u=Du) and certain boundary value conditions at the boundary corners.

Lyusternik, L. A.↗

Numerical Solutions of Supersonic and Hypersonic Laminar Compression Corner Flows

An efficient time-splitting, second-order accurate, numerical scheme is used to solve the complete Navier-Stokes equations for supersonic and hypersonic laminar flow over a two-dimensional compression corner. A fine, exponentially stretched mesh spacing is used in the region near the wall for resolving the viscous layer. Good agreement is obtained between the present computed results and experimental measurement for a Mach number of 14.1 and a Reynolds number of 1.04 x 10(exp 5) with wedge angles of 15 deg, 18 deg, and 24 deg. The details of the pressure variation across the boundary layer are given, and a correlation between the leading edge shock and the peaks in surface pressure and heat transfer is observed.

Hung, C. M.↗

Numerical solution of the Navier-Stokes equations for arbitrary two-dimensional multi-element airfoils

The development of a numerical simulation of time dependent, turbulent, compressible flow about two dimensional multi-element airfoils of arbitrary shape is described. The basis of this simulation is a technique of automatic numerical generation of coordinate systems fitted to the multiple bodies regardless of their number or shape. Procedures developed whereby the coordinate lines are automatically concentrated in the boundary layer at any Reynolds number are discussed. The compressible turbulent solution involves an algebraic eddy viscosity turbulence model. The laminar version was run for transonic flow at free stream Mach numbers up to 0.9.

Thompson, J. F.↗

Numerical grid generation; Proceedings of the Symposium on Numerical Generation of Curvilinear Coordinate Systems and Their Use in the Numerical Solution of Partial Differential Equations, Nashville, TN, April 13-16, 1982

General curvilinear coordinate systems are considered along with the error induced by coordinate systems, basic differential models for coordinate generation, elliptic grid generation, conformal grid generation, algebraic grid generation, orthogonal grid generation, patched coordinate systems, and solid mechanics applications of boundary fitted coordinate systems. Attention is given to coordinate system control and adaptive meshes, the application of body conforming curvilinear grids for finite difference solution of external flow, the use of solution adaptive grids in solving partial differential equations, adaptive gridding for finite difference solutions to heat and mass transfer problems, and the application of curvilinear coordinate generation techniques to the computation of internal flows. Other topics explored are related to the solution of nonlinear water wave problems using boundary-fitted coordinate systems, the numerical modeling of estuarine hydrodynamics on a boundary-fitted coordinate system, and conformal grid generation for multielement airfoils.

Thompson, J. F.↗

Flow field analysis of aircraft configurations using a numerical solution to the three-dimensional unified supersonic/hypersonic small disturbance equations, part 1

The unified small disturbance equations are numerically solved using the well-known Lax-Wendroff finite difference technique. The method allows complete determination of the inviscid flow field and surface properties as long as the flow remains supersonic. Shock waves and other discontinuities are accounted for implicity in the numerical method. This technique was programed for general application to the three-dimensional case. The validity of the method is demonstrated by calculations on cones, axisymmetric bodies, lifting bodies, delta wings, and a conical wing/body combination. Part 1 contains the discussion of problem development and results of the study. Part 2 contains flow charts, subroutine descriptions, and a listing of the computer program.

Gunness, R. C., Jr.↗

Evolution of midplate hotspot swells: Numerical solutions

The evolution of midplate hotspot swells on an oceanic plate moving over a hot, upwelling mantle plume is numerically simulated. The plume supplies a Gaussian-shaped thermal perturbation and thermally-induced dynamic support. The lithosphere is treated as a thermal boundary layer with a strongly temperature-dependent viscosity. The two fundamental mechanisms of transferring heat, conduction and convection, during the interaction of the lithosphere with the mantle plume are considered. The transient heat transfer equations, with boundary conditions varying in both time and space, are solved in cylindrical coordinates using the finite difference ADI (alternating direction implicit) method on a 100 x 100 grid. The topography, geoid anomaly, and heat flow anomaly of the Hawaiian swell and the Bermuda rise are used to constrain the models. Results confirm the conclusion of previous works that the Hawaiian swell can not be explained by conductive heating alone, even if extremely high thermal perturbation is allowed. On the other hand, the model of convective thinning predicts successfully the topography, geoid anomaly, and the heat flow anomaly around the Hawaiian islands, as well as the changes in the topography and anomalous heat flow along the Hawaiian volcanic chain.

Liu, Mian↗

Stellar convection 2: A multi-mode numerical solution for convection in spheres

The convective flow of a self gravitating sphere of Boussinesq fluid for small Reynolds and Peclet numbers is numerically determined. The decomposition of the equations of motion into modes is reviewed and a relaxation method is developed and presented to compute the solutions to these equations. The stable equilibrium flow for a Rayleigh number of 10 to the 4th power and a Prandtl number of 10 is determined. The 2 and 3 dimensional spectra of the kinetic and thermal energies and the convective flux as a function of wavelengths are calculated in terms of modes. The anisotropy of the flow as a function of wavelength is defined.

Marcus, P. S.↗

Numerical solutions of three-dimensional Navier-Stokes equations for closed-bluff bodies

Methods of grid adaption are reviewed and a method is developed with the capability of adaption to several flow variables. This method is based on a variational approach and is an algebraic method which does not require the solution of partial differential equations. The method has also been formulated in such a way that there is no need for any matrix inversion. The method is used in conjunction with the calculation of hypersonic flow over a blunt nose. The equations of motion are the compressible Navier-Stokes equations where all viscous terms are retained. They are solved by the MacCormack time-splitting method and a movie has been produced which shows simultaneously the transient behavior of the solution and the grid adaption. The results are compared with the experimental and other numerical results.

Abolhassani, Jamshid S.↗

Effect of airfoil (trailing-edge) thickness on the numerical solution of panel methods based on the Dirichlet boundary condition

The practical limit of airfoil thickness ratio for which acceptable engineering results are obtainable with the Dirichlet boundary-condition-based numerical methods is investigated. This is done by studying the effect of thickness on the calculated pressure distribution near the trailing edge and by comparing the aerodynamic coefficients with available exact solutions. The first objective of this study, owing to the wide use of such computational methods, is to demonstrate the numerical symptoms that occur when the body or wing thickness approaches zero and to increase the awareness of potential users of these methods. Additionally, an effort is made to obtain the practical limits of the trailing-edge thickness where such problems will appear in the flow solution, and to propose some possible cures for very thin airfoils or those with cusped trailing edges.

Yon, Steven↗

Numerical solution for the temperature distribution in a cooled guide vane blade of a radial gas turbine

A two dimensional finite difference numerical technique is presented to determine the temperature distribution of an internal cooled blade of radial turbine guide vanes. A simple convection cooling is assumed inside the guide vane blade. Such cooling has relatively small cooling effectiveness at the leading edge and at the trailing edge. Heat transfer augmentation in these critical areas may be achieved by using impingement jets and film cooling. A computer program is written in FORTRAN IV for IBM 370/165 computer.

Hosny, W. M.↗

Numerical solutions for the spin-up of a stratified fluid

The model of Warn-Varnas et al. (1978) is used to numerically examine the spin-up flow of a thermally stratified fluid in a cylinder with an insulating side wall, and comparison of the results with the laser-Doppler measurements of Lee (1975) shows excellent agreement. It is shown that flow gradients are created in the interior of the fluid during the meridional circulation spin-up phase, and that the azimuthal flow decayed faster than has been predicted by Wallin (1969). It is established that viscous diffusion in the interior, arising from the interior-flow gradients, is the cause of the discrepancy with Wallin's theory.

Hyun, J. M.↗

Numerical solutions of supersonic and hypersonic laminar flows over a two-dimensional compression corner

An efficient time-splitting, second-order accurate, numerical scheme is used to solve the complete Navier-Stokes equations for supersonic and hypersonic laminar flow over a two-dimensional compression corner. A fine, exponentially stretched mesh spacing is used in the region near the wall for resolving the viscous layer. Good agreement is obtained between the present computed results and experimental measurement for a Mach number of 14.1, a Reynolds number of 104,000, and wedge angles of 15, 18, and 24 deg. The details of the pressure variation across the boundary layer are given, and a correlation between the leading edge shock and the peaks in surface pressure and heat transfer is observed.

Hung, C. M.↗

Numerical solution of flow problems using body-fitted coordinate systems

The technique of boundary-fitted coordinate systems is based on a method of automatic numerical generation of a general curvilinear coordinate system having a coordinate line coincident with each boundary of a general multi-connected region containing any number of arbitrarily shaped bodies. Once the curvilinear coordinate system is generated, any partial differential system of interest can be solved on this coordinate system by transforming the equations and solving the resulting system in finite difference approximation on the rectangular transformed plane. This method of automatic body-fitted curvilinear coordinate generation is used to construct finite-difference solutions of the full, time dependent Navier-Stokes equations for the unsteady viscous flow about arbitrary two-dimensional airfoils, or any other two-dimensional bodies. Finally, initial results for three-dimensional applications are also presented.

Thompson, J. F.↗

Numerical Solution of the Flow of a Perfect Gas Over A Circular Cylinder at Infinite Mach Number

A solution for the two-dimensional flow of an inviscid perfect gas over a circular cylinder at infinite Mach number is obtained by numerical methods of analysis. Nonisentropic conditions of curved shock waves and vorticity are included in the solution. The analysis is divided into two distinct regions, the subsonic region which is analyzed by the relaxation method of Southwell and the supersonic region which was treated by the method of characteristics. Both these methods of analysis are inapplicable on the sonic line which is therefore considered separately. The shapes of the sonic line and the shock wave are obtained by iteration techniques. The striking result of the solution is the strong curvature of the sonic line and of the other lines of constant Mach number. Because of this the influence of the supersonic flow on the sonic line is negligible. On comparison with Newtonian flow methods, it is found that the approximate methods show a larger variation of surface pressure than is given by the present solution.

Hamaker, Frank M.↗