Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Performance of amine-multilayered solid sorbents for CO2 removal: Effect of fabrication variables

The emission of fossil fuel carbon dioxide (CO{sub 2) to the atmosphere is implicated as the predominant cause of global climate change; therefore, advanced CO{sub 2} capture technologies are of the utmost importance. In this study, innovative amine-multilayered sorbents were fabricated using layer-by-layer (LbL) nanoassembly technology via alternate deposition of a CO{sub 2}-adsorbing amine polymer (e.g. polyethylenimine or PEI) and an oppositely-charged polymer (e.g. polystyrene sulfonate or PSS). We found that the developed sorbents could be used for CO{sub 2} capture and that LbL nanoassembly allows us to engineer their CO{sub 2} capture performance through the fabrication variables (e.g. deposition polymers, deposition media, and number of bilayers). PEI/PSS was found to be the best polymer combination for developing sorbents with relatively high CO{sub 2} capture capacity. The amine-multilayered solid sorbents possessed fine microstructures and may have similar polymer deposition within and on the surface of solid sorbents. These amine-multilayered sorbents had much faster CO{sub 2} desorption rates compared to sorbents prepared using the current PEI-impregnation approach. Such fast CO{sub 2} desorption could make sorbents a good option for CO{sub 2} removal from power plants and even the atmosphere.

20 FOSSIL-FUELED POWER PLANTS↗

Multilayer shallow shelf approximation: Minimisation formulation, finite element solvers and applications

In this paper, a multilayer generalisation of the Shallow Shelf Approximation (SSA) is considered. In this recent hybrid ice flow model, the ice thickness is divided into thin layers, which can spread out, contract and slide over each other in such a way that the velocity profile is layer-wise constant. Like the SSA (1-layer model), the multilayer model can be reformulated as a minimisation problem. However, unlike the SSA, the functional to be minimised involves a new penalisation term for the interlayer jumps of the velocity, which represents the vertical shear stresses induced by interlayer sliding. Taking advantage of this reformulation, numerical solvers developed for the SSA can be naturally extended layer-wise or column-wise. Numerical results show that the column-wise extension of a Newton multigrid solver proves to be robust in the sense that its convergence is barely influenced by the number of layers and the type of ice flow. In addition, the multilayer formulation appears to be naturally better conditioned than the one of the first-order approximation to face the anisotropic conditions of the sliding-dominant ice flow of ISMIP-HOM experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. Furthermore, by combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure.

Sebastiani-Tofano, Eugenia [Universidad Complutens↗

Multilayered sandwich-like architecture containing large-scale faceted Al–Cu–Fe quasicrystal grains

Faceted quasicrystals are structurally special compared with traditional crystals. Although the application of faceted quasicrystals has been expected, wide-scale application has not occurred owing to the limited exposure of the facets. Using a facile method of heat treatment, we synthesize a multilayered sandwich-like structure with each layer composed of large-scale pentagonal-dodecahedra of Al–Cu–Fe quasicrystals. Moreover, there are channels between the adjacent Al–Cu–Fe layers that serve to increase the exposure of the facets of quasicrystals. Scanning electron microscopy, transmission electron microscopy, and X-ray diffraction are used to characterize the multilayered architecture, and the generation mechanisms of this special structure are also discussed. - Highlights: • A multilayered sandwich-like structure is produced by a facile method. • Each layer is covered by large-scale faceted Al–Cu–Fe quasicrystals. • There are channels between the adjacent Al–Cu–Fe layers.

36 MATERIALS SCIENCE↗

Modification of microstructure and properties of Ti-47Al-2Cr-4Nb-0.3W alloys fabricated by SPS with trace multilayer graphene addition

Highlights: • The TiAl alloys with different content addition of multilayer graphene were fabricated. • When the graphene content is 0.8 at.%, the mean grain size decreases to 8.2 μm. • The bending and fracture strength increase to 1000 MPa and 2347 MPa, respectively. • The friction coefficient decreased from 0.6 to 0.4, with a decrease by 1/3. - Abstract: In this paper, Ti-47Al-2Cr-4Nb-0.3W alloys with trace multilayer graphene addition were fabricated by spark plasma sintering to enhance both mechanical properties and tribological property simultaneously. With the addition of multilayer graphene, bending strength, compressive strength and tribological property of TiAl alloys are all improved. When graphene content increases from zero to 0.8 at.%, the mean grain size decreases from 14.8 ± 1.4 μm to 8.2 ± 0.8 μm. The bending strength reaches almost 1000 MPa and the fracture strength increases to 2347 ± 12 MPa, an increase of 15% compared with TiAl alloy. The friction coefficient also decreases from about 0.6 to 0.4, a decrease by 1/3 compared with TiAl alloy. The reasons for the improved mechanical properties and tribological property are the in-situ reaction plate-shape Ti{sub 2}AlC phase, fine needle-like Ti{sub 3}AlC phase as well as fine and homogeneous microstructure. The wear mechanism changes from abrasive wear to abrasive wear plus adhesive wear with the increased graphene content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of deposition conditions and bilayer thickness on physical-mechanical properties of CA-PVD multilayer ZrN/CrN coatings

Highlights: • Multilayer ZrN/CrN coatings were deposited using Arc-PVD AISI321 steel substrates. • Structure, elemental and phase composition, and mechanical properties were studied. • Presence of face-centered cubic ZrN, CrN and hexagonal Cr{sub 2}N phases were detected. • All samples were heated up to 1400 °C in argon to understand thermal behavior. • Enhancement of microhardness was observed at lower values of bilayer thickness. - Abstract: ZrN/CrN multilayers have been produced by a cathodic arc technique (CA-PVD) using different depositions conditions. Microstructural and mechanical characterizations of the coatings were performed by X-ray diffraction (XRD), scanning electron microscopy with energy dispersive spectroscopy (SEM with EDS), transmission electron microscopy (TEM), and Vickers microhardness tests. Variations in thermal transformation properties due to heating within the temperature range from 30 °C to 1400 °C were studied by differential scanning calorimetry (DSC) measurements. SEM and TEM observations showed that the coatings comprise a multilayered structure with nanometric grains. EDS spectra confirmed the formation of stoichiometric composition. Near-to-super stoichiometric nitrides can be suggested in certain specimens. Results of the XRD analysis revealed that the (200) and (111) planes for ZrN and Cr{sub 2}N are the most intense. Calorimetric tests showed that below a certain annealing temperature no transformations were defined. 1180 °C was found to be the value where only one-stage state transformation, presented by endothermic or exothermic reactions, took place. The highest hardness (4685HV0.025) was obtained for the coating with Λ = 140 nm, P{sub N} = 0.43 Pa, U{sub S} = −70 V.

36 MATERIALS SCIENCE↗

Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression

Highlights: • Nanocrystallised multilayered metallic material was produced by novel technique. • Bonding between nanocrystallised plates was achieved by constrained compression. • The metal-metal bonding occurred between fragmented oxide layers. • A high degree of structural inhomogeneity was observed near bonded regions. - Abstract: Nanocrystallised multilayered metallic material was obtained via duplex technique combining the surface mechanical attrition treatment (SMAT) with a novel constrained compression (CC) process. At the initial stage the 1 mm thick sheets of 316L austenitic stainless steel were processed by the SMAT in order to form a nanocrystalline structure. At the final stage disc-shaped plates excised from SMATed sheets, were assembled in a package and compressed in order to produce metallurgical bonding between individual plates. The characterization of such a multilayered structure was studied both experimentally and numerically. The microscopic examination revealed that the bonding occurred in the central portions of the package where the oxide scale covering each plate was fragmented by high shear strains. The numerical analysis confirmed that the strains at the interior interfaces are significantly higher than at the external ones. A high degree of structural inhomogeneity was observed via TEM studies in the regions where the successful bonding was achieved. Regions characterised by fine band structure with the presence of α′-martensite phase as well as coarse cellular structure within a single γ-austenite phase were identified.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Semiconductor/metal nanocomposites formed by in situ reduction method in multilayer thin films

A layer-by-layer adsorption and in situ reduction method was adopted for synthesizing semiconductor/metal nanocomposites in multilayer ultra-thin films. Alternate adsorption of ZnO nanoparticles modified with poly(ethyleneimine), hydrogentetrachloroaurate and poly(styrenesulfonate) sodium results in the formation of ZnO/AuCl{sub 4}{sup -}-loaded multilayer films. In situ reduction of the incorporated metal ions by heating yields ZnO/Au nanocomposites in the films. UV-vis absorption spectroscopy and X-ray photoelectron spectroscopy were used to characterize the components of the composite films. UV-vis spectra indicate regular growth of the films. The electrochemistry behavior of the multilayer films was studied in detail on indium tin oxide electrode. The combined results suggest that the layer-by-layer adsorption and subsequent reduction method used here provides an effective way to synthesize ZnO/Au nanocomposites in the polymer matrix.

36 MATERIALS SCIENCE↗

Ground-state energy trends in single and multilayered coupled InAs/GaAs quantum dots capped with InGaAs layers: Effects of InGaAs layer thickness and annealing temperature

Graphical abstract: - Highlights: • Investigation of ground state energy in single and multi-layered InAs/GaAs QD. • Strain reducing layer (InGaAs) prevents the formation of non-radiative. • Strain reducing layer (InGaAs) is responsible for high activation energy. • Significant deviation from the Varshni model, E(T) = E − αT{sup 2}/T + β. - Abstract: Vertically coupled, multilayered InAs/GaAs quantum dots (QDs) covered with thin InGaAs strain-reducing layers (SRLs) are in demand for various technological applications. We investigated low temperature photoluminescence of single and multilayered structures in which the SRL thickness was varied. The SRL layer was responsible for high activation energies. Deviation of experimental data from the Varshni (1967) model, E(T) = E − ∞ T{sup 2}/T + β, suggests that the InAs-layered QDs have properties different from those in bulk material. Anomalous ground-state peak linewidths (FWHM), especially for annealed multilayer structures, were observed. A ground-state peak blue-shift with a broadened linewidth was also observed. Loss of intensity was detected in samples annealed at 800 °C. Presence of SRLs prevents formation of non-radiative centers under high temperature annealing. The results indicate the potential importance of such structures in optoelectronic applications.

36 MATERIALS SCIENCE↗

Activation energy and carriers dynamics of multilayer CdTe/ZnTe quantum dots with different ZnTe separation layer thicknesses

We studied the optical properties of multilayer CdTe/ZnTe quantum dots (QDs) with various ZnTe separation layer thicknesses on GaAs substrates. The low temperature photoluminescence (PL) spectra show that the excitonic peaks in multilayer CdTe/ZnTe QDs shift to higher energy levels, and PL peak intensities increase with increasing ZnTe separation layer thickness. This is because of increasing uncoupling and because there are many more carriers confined in the QDs with wider separation layers. Temperature-dependent PL measurements showed that the activation energies of the confined electrons in the multilayer CdTe/ZnTe QDs decreases with decreasing ZnTe separation layer thickness. The time-resolved PL spectra show increasing carrier decay times with decreasing ZnTe separation layer thickness, due to increasing coupling between QDs with narrower separation layers.

36 MATERIALS SCIENCE↗

Comparison of effects from gamma, e-beam and X-ray radiation on multilayer polymer films used in biopharmaceutical devices by chemometric treatment of spectroscopic data

The present study investigated the effects of gamma-ray, electron beam, and X-ray radiation on polymers in EVA/EVOH/EVA multilayer films. Spectroscopic methods, including FTIR and UV–Vis, were employed in conjunction with chemometric treatments such as PCA, SIMPLISMA treatments, and PLS models. The feasibility of dose prediction on multilayer film, given a known dose, is attainable across various irradiation technologies. Both gamma ray and X-ray exhibit comparable effects on the multilayer film, and it is feasible to anticipate the dose released on the film by utilizing UV–Vis spectra or infrared spectra for gamma ray or X-ray of a predetermined dose.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Fabrication of multilayer TiO{sub 2} thin films for dye-sensitized solar cells with high conversion efficiency by electrophoresis deposition

This research coats a commercial TiO{sub 2} nanoparticle Degussa P25 with good roundness and size uniformity on an indium tin oxide (ITO) glass substrate and to be photoelectrical electrode by electrophoresis deposition. It combined with dye N719, electrolyte I{sup -}/ I{sub 3}{sup -} and counter-electrode of Pt layer to produce dye-sensitized solar cells (DSSCs). Through the electrophoretic technique, a multilayer film of an appropriate thickness is deposited in the suspension containing TiO{sub 2} nanoparticles and isopropanol. In this process, electric current, voltage, and the number of deposition cycles are well controlled to obtain a single TiO{sub 2} film of around 3.3 {mu}m thick. Stacking is then performed to obtain a multilayer-typed TiO{sub 2} film of around 12 {mu}m thick. As the sintering temperature reaches 400 C, the prepared multilayer TiO{sub 2} film with a good compactness can increase the dye adsorption capability of the thin film and enhance its adsorption percentage. In addition, the heat treatment will transfer a portion of the rutile crystalline into the anatase crystalline, resulting in better material properties for DSSCs application. DSSCs produced are exposed to metal halide lamp and their energy conversion efficiency is measured. The I-V curve of the produced DSSCs shows that it has an excellent energy conversion efficiency of 6.9%. (author)

14 SOLAR ENERGY↗

Residual stress characterization of Al/SiC nanoscale multilayers using X-ray

Nanolayered composites are used in a variety of applications such as wear resistant coatings, thermal barrier coatings, optical and magnetic thin films, and biological coatings. Residual stresses produced in these materials during processing play an important role in controlling their microstructure and properties. In this paper, we have studied the residual stresses in model metal-ceramic Al/SiC nanoscale multilayers produced by physical vapor deposition (magnetron sputtering). X-ray synchrotron radiation was used to measure stresses in the multilayers using the sin{sup 2} {Psi} technique. The stresses were evaluated as a function of layer thicknesses of Al and SiC and also as a function of the number of layers. The stress state of Al in the multilayer was largely compressive, compared to single layer Al stresses. This is attributed to a peening mechanism due to bombardment of the Al layers by SiC and Ar neutrals during deposition. The stress evolution was numerically modeled by a simplified peening process to qualitatively explain the Al thickness-dependent residual stresses.

36 MATERIALS SCIENCE↗

The width of the lateral element of the synaptonemal complex is determined by a multilayered organization of its components

The synaptonemal complex (SC) is a proteinaceous structure that holds the homologous chromosomes in close proximity while they exchange genetic material in a process known as meiotic recombination. This meiotic recombination leads to genetic variability in sexually reproducing organisms. The ultrastructure of the SC is studied by electron microscopy and it is observed as a tripartite structure. Two lateral elements (LE) separated by a central region (CR) confer its classical tripartite organization. The LEs are the anchoring platform for the replicated homologous chromosomes to properly exchange genetic material with one another. An accurate assembly of the LE is indispensable for the proper completion of meiosis. Ultrastructural studies suggested that the LE is organized as a multilayered unit. However, no validation of this model has been previously provided. In this ultrastructural study, by using mice with different genetic backgrounds that affect the LE width, we provide further evidence that support a multilayered organization of the LE. Additionally, we provide data suggesting additional roles of the different cohesin complex components in the structure of the LEs of the SC. - Highlights: • The lateral element of the synaptonemal complex is a multilayered structure. • The width of the lateral element in synaptonemal complex-null mice is different. • Two cohesin complex cores plus one axial element form a wild-type lateral element. • The layers of the lateral element can be analyzed in different null mice models.

60 APPLIED LIFE SCIENCES↗

Dynamics of multilayer Rayleigh–Taylor instability at moderately high Atwood numbers

This paper investigates the multilayer Rayleigh–Taylor instability (RTI) using statistically stationary experiments conducted in a gas tunnel. Employing diagnostics such as particle image velocimetry (PIV) and planar laser induced fluorescence (PLIF), we make simultaneous velocity–density measurements to study how dynamics and mixing are linked in this variable density flow. Experiments are conducted in a newly built, blow-down three-layer gas tunnel facility. Mixing between three gas streams is studied, where the top and bottom streams are comprised of air, and the middle stream is an air–helium mixture. Shear is minimized between these streams by matching their inlet velocities. The four experimental conditions investigated here consist of two different density ratios (Atwood numbers 0.3 and 0.6), each investigated at two instability development times (or equivalently, two streamwise locations), and all experiments are with the same middle stream thickness of 3 cm. The growth of the middle layer is measured using laser-based planar Mie scattering visualization. The mixing width is found to grow linearly with time at late times. Various quantitative measures of molecular mixing indicate a very high degree of molecular mixing at late times in the multilayer RTI flow. The vertical turbulent mass flux $a_y$ is calculated. In addition to mostly negative values of $a_y$ , typical of buoyancy-dominated flows due to negative correlation between velocity and density fluctuations, positive regions are also observed in profiles of $a_y$ due to entrainment and erosion at the lower edge of the mixing region. Global energy budgets are calculated for the multilayer RTI flow at late times and it is found that the majority of potential energy released has been dissipated due to viscous effects, and a large value of mixing efficiency ( $\sim$ 60 %) is observed.

Mechanics↗

Flat-On Secondary Crystals as Effective Blocks To Reduce Ionic Conduction Loss in Polysulfone/Poly(vinylidene fluoride) Multilayer Dielectric Films

Recently, poly(vinylidene fluoride) (PVDF)-based multilayer films have demonstrated good potential as high energy density, high temperature, and low loss polymer dielectrics for advanced electrical and power applications. However, impurity ion conduction in the PVDF layers can cause significant dielectric loss at high temperatures. In this study, we discovered a facile melt-recrystallization method to suppress ionic conduction loss in polysulfone (PSF)/PVDF 50/50 (v/v) 33-layer films. By use of combined differential scanning calorimetry, broadband dielectric spectroscopy, and simultaneous small-angle X-ray scattering/wide-angle X-ray diffraction techniques, the underlying mechanism for the suppression of ionic conduction was unraveled. Basically, the growth and hierarchical organization of primary and secondary PVDF crystals confined in 400 nm layers played an important role. When the cooling rate during melt-recrystallization was high (e.g., ≥ 500 °C/min), small and poorly oriented secondary crystals between orderly stacked edge-on primary crystals allowed free transport of impurity ions in PVDF layers. At low to moderate cooling rates (i.e., <100 °C/min), growth of flat-on secondary crystals between the edge-on primary crystalline lamellae blocked the transport of impurity ions, suppressing the dielectric loss from ionic conduction. On the basis of this paper, we propose a modified multilayer coextrusion method with controlled cooling rates to achieve flat-on secondary crystals for the reduction of high temperature dielectric loss in PVDF-based multilayer dielectric films.

36 MATERIALS SCIENCE↗

High Selectivities among Monovalent Cations in Dialysis through Cation-Exchange Membranes Coated with Polyelectrolyte Multilayers

Cation-exchange membranes allow preferential passage of cations over anions, but they show minimal selectivity among cations, which limits their use in ion separations. Recent studies show that modification of cation-exchange membranes with polyelectrolyte multilayers leads to exceptional monovalent/divalent cation electrodialysis selectivities, but no studies report high selectivity among monovalent ions. Here, this work demonstrates that adsorption of protonated poly(allylamine) (PAH)/poly(4-styrenesulfonate) (PSS) multilayers on Nafion membranes leads to high K + /Li + selectivities in Donnan dialysis, where K + and Li + ions in a source phase pass through the membrane and exchange with Na + ions in a receiving phase. Addition of 0.01 M HNO 3 to a source phase containing 0.01 M KNO 3 and 0.01 M LiNO 3 increases the K + /Li + selectivity from 8 to ~60 through (PAH/PSS) 5 PAH-coated Nafion membranes, primarily because of a ≥fivefold increase in K + flux. These selectivities are much larger than the ratio of 1.9 for the aqueous diffusion coefficients of K + and Li + , and uncoated Nafion membranes give a K + /Li + selectivity <3. Bi-ionic transmembrane potential measurements at neutral pH confirm that the membrane is more permeable to K + than Li + , but this selectivity is less than in Donnan dialysis with acidic solutions. In situ ellipsometry data indicate that PAH/PSS multilayers (assembled at pH 2.3, 7.5, or 9.3) swell at pH 2.0, and this swelling may open cation-exchange sites that preferentially bind K + to enable highly selective transport. The coated membranes also exhibit modest selectivity for K + over H + , suggesting selective transport based on preferential partitioning of K + into the coatings. Selectivity declines when increasing the source-phase KNO 3 concentration to 0.1 M, perhaps because the discriminating transport pathway saturates. Finally, selectivities are lower in electrodialysis than in Donnan dialysis, presumably because electrodialysis engages other transport mechanisms, such as electroosmosis and strong electromigration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal-Strain-Enabled Enhanced Emission from UV Laser-Induced Defect Levels near the Surface of Multilayer MoS 2

Monolayer two-dimensional (2D) materials have been intensively studied while research on multilayers is still in its infancy. Here, we induce defects inside bulk MoS 2 through thermal annealing and near the surface of multilayer MoS 2 using 375 nm laser irradiation, and investigate their photoluminescence (PL) and fluorescence lifetime imaging (FLIM). Enhanced emission is limited within a certain MoS 2 thickness. The observed enhanced emission is evidenced by a threshold behavior in super-linear PL intensity increase, strong polarization effects, and increased lifetime of defect peak. The laser power threshold for enhanced emission is much smaller in defects near the surface than that inside the bulk of multilayer MoS 2 . The mechanical strain from a wrinkle of the sample further lowers the laser power threshold for enhanced emission. By exciting with a 639 nm laser that is close to the fundamental gap between the conduction band minimum and the valence band maximum, the lifetime of defect enhanced emission increased by 5 times. Furthermore, one of the competing indirect bandgap emissions disappears, and the defect emission peak dominates the PL spectrum in the wrinkle area with a strain. Furthermore, the discovered principle can be applied to future studies on the integration of enhanced emission and single photon emission involving selectively depopulating the conduction band of the host crystal to defect levels for quantum emitters.

2D materials↗