Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOLECULAR ION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A New General Paradigm for Understanding and Preventing Li Metal Penetration through Solid Electrolytes

The use of lithium (Li) or sodium (Na) metal anodes together with highly ion-conductive solid electrolytes (SEs) could provide batteries with a step improvement in volumetric and gravimetric energy densities. Unfortunately, these SEs face significant technical challenges, in large part because Li and Na dendrites can penetrate through SEs, leading to short circuits. The ability of such a soft material (Li or Na metal) to penetrate through ceramic is surprising from the point of view of models widely used in the Li-battery field. We introduce a concept, new to the battery field, for preventing penetration of lithium dendrites through SEs by putting the SE surfaces into a state of residual compressive stress. For a sufficiently high compressive stress, cracks have difficulty forming, and cracks that do form are forced to close, inhibiting dendrite penetration. This approach is widely used to solve commercially important stress corrosion cracking problems in metals and static fatigue problems in ceramics and glasses (e.g., Gorilla Glass). However, the technique will not be useful for SEs if the Li-ion transport rate through a SE is substantially reduced when the SE is under compression. Our molecular dynamics calculations for Li-ion transport through a common SE demonstrate that the introduction of even very high residual compressive stresses (~10 GPa) has only a modest effect on Li-ion transport kinetics, suggesting that this approach is viable and capable of providing a new paradigm for developing high-performance and mechanically stable SEs.

25 ENERGY STORAGE↗
DOE OSTI2025

Probing the pH Effect on Boehmite Particles in Water Using Vacuum Ultraviolet Single-Photon Ionization Mass Spectrometry

Boehmite has been widely used in theoretical research and industry, especially for hazardous material processing. For the liquid-phase treating process, the interfacial properties of boehmite are believed to be affected by pH conditions, which change its physicochemical behavior. However, molecular-level detection on cluster ions is challenging when using bulk approaches. Herein we employ in situ vacuum ultraviolet single-photon ionization mass spectrometry (VUV SPI-MS) coupled with a vacuum-compatible microreactor system for analysis at the liquid–vacuum interface (SALVI) to investigate the solute molecular composition of boehmite under different pH conditions for the first time. The mass spectral results show that more complex clustering of solute molecules exists at the solid–liquid (s–l) interface than conventionally perceived in a “simple” aqueous solution. Besides solute ions, such as boehmite molecules and fragments, the composition and appearance energies of these newly discovered solvated cluster ions are determined by VUV SPI-MS in different pH solutions. We offer new results for the pH-dependent effect of boehmite and provide insights into a more detailed solvation mechanism at the s–l interface. By comparing the key products under different pH conditions, fundamental understanding of boehmite dissolution is revealed to assist the engineering design of waste processing and storage solutions.

SALVI↗
DOE OSTI2024

Effect of K + Force Fields on Ionic Conductivity and Charge Dynamics of KOH in Ethylene Glycol

Predicting ionic conductivity is crucial for developing efficient electrolytes for energy storage and conversion and other electrochemical applications. An accurate estimate of ionic conductivity requires understanding complex ion–ion and ion–solvent interactions governing the charge transport at the molecular level. Molecular simulations can provide key insights into the spatial and temporal behavior of electrolyte constituents. However, such insights depend on the ability of force fields to describe the underlying phenomena. In this work, molecular dynamics simulations were leveraged to delineate the impact of force field parameters on ionic conductivity predictions of potassium hydroxide (KOH) in ethylene glycol (EG). Four different force fields were used to represent the K + ion. Diffusion-based Nernst–Einstein and correlation-based Einstein approaches were implemented to estimate the ionic conductivity, and the predicted values were compared with experimental measurements. The physical aspects, including ion-aggregation, charge distribution, cluster correlation, and cluster dynamics, were also examined. A force field was identified that provides reasonably accurate Einstein conductivity values and a physically coherent representation of the electrolyte at the molecular level.

25 ENERGY STORAGE↗
DOE OSTI2022

Atomistic modeling of LiF microstructure ionic conductivity and its influence on nucleation and plating

We report the formation and degradation of the solid electrolyte interphase (SEI) and its underlying transport properties play an essential role in the overall performance of lithium-ion batteries. This paper presents classical molecular dynamics studies on polycrystalline inorganic lithium fluoride (LiF) layers to model and predict the SEI transport properties. The ionic conductivity is obtained from the lithium-ion diffusivity in polycrystalline structures of LiF using the Nernst-Einstein relation. The predicted molecular dynamics data are used in a continuum scale phase-field model to evaluate the plating kinetics under fast charging conditions. The analysis emphasizes that the SEI ionic conductivity properties impact the plating dynamics, where SEI's low ion conductivity value is prone to large plating and subsequent capacity degradation. The combination of atomic and continuum scale studies shown herein lays a foundation to tune in SEI transport properties to decrease the amount of lithium plating and improve the performance of fast-charging batteries.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Interacting dust grains in complex plasmas: Ion wake formation and the electric potential

Dust grains have been used as minimally invasive probes to determine plasma parameters including the plasma density, temperature, and electric field in a plasma discharge. However, the dust grains in a plasma generate local potential disturbances due to the collection of charge and the subsequent electrostatic interactions between the dust and charged plasma particles. Dust grains in close proximity to one another exhibit interesting non-reciprocal interactions and self-organize into structures such as one-dimensional filamentary chains, two-dimensional “zigzags,” and three-dimensional helices, among others. The formation of these structures suggests that although the dust grains may be less invasive than traditional plasma probes, the disturbance to the local plasma environment introduced by dust grains is non-trivial. Commonly used analytic forms of the electric potential describing complex plasmas have failed to resolve the near-dust region, and as a result are insufficient to provide insight about the formation of complex dust structures. Here, we use an N-body simulation to compute the electric potential from ion densities near various dust grain configurations. We provide an alternative description to the standard analytic model for the electric potential of dust and ion wakes based on a Gaussian shaped cloud of ions. The electric potential obtained from simulations is used to identify minimum energy configurations for two and three dust grains. It is further demonstrated that the minimum potential region identified for N dust grains and their associated ion wakes does not predict the minimum-energy configuration of N + 1 dust grains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Electrodeposition of Zinc in Aqueous Electrolytes Containing High Molecular Weight Polymers

Strong polarization of the ion distribution in liquid electrolytes subjected to potential differences exceeding the thermal voltage, V T = kT/e, produces a hydrodynamic instability termed electroconvection at ion-selective interfaces. Electroconvection is desirable in some situations (e.g., electrodialysis) because it promotes mixing in a stagnant electrolyte layer, enhancing the ion flux at a fixed potential difference. It is undesirable in others (e.g., electrodeposition of metals) where early experiments show that convective fluid rolls associated with hydrodynamic instability in bounded electrolytes produce preferential metal deposition at localized regions on an electrode. Such localized deposition drives the family of morphological instabilities loosely termed dendritic electrodeposition. We experimentally investigate the effect of ultrahigh molecular weight polymer additives on the onset conditions and physical characteristics of both instabilities. Direct observations of electrodeposit morphology and tracer particle motions used in tandem with indirect electrokinetic measurements reveal that even at moderate concentrations, the polymer additives have a large beneficial effect in extending the range of electric potentials where stable electrodeposition is observed. Additionally, we report that at polymer concentrations above the entanglement threshold, high molecular weight polymers impart elasticity to liquid electrolytes which dampen electroconvective flow at a cation-selective interface but have at most a minimal effect on the bulk ionic conductivity of the liquid.

25 ENERGY STORAGE↗
DOE OSTI2021

Solvation Structure and Dynamics of Mg(TFSI) 2 Aqueous Electrolyte

Using ab initio molecular dynamics (AIMD) simulations, classical molecular dynamics (CMD) simulations, small-angle X-ray scattering (SAXS), and pulsed-field gradient nuclear magnetic resonance (PFG-NMR), the solvation structure and ion dynamics of magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ) aqueous electrolyte at 1, 2, and 3 m concentrations are investigated. From AIMD and CMD simulations, the first solvation shell of an Mg 2+ ion is found to be composed of six water molecules in an octahedral configuration and the solvation shell is rather rigid. The TFSI - ions prefer to stay in the second solvation shell and beyond. Meanwhile, the comparable diffusion coefficients of positive and negative ions in Mg(TFSI) 2 aqueous electrolytes have been observed, which is mainly due to the formation of the stable [Mg(H 2 O) 6 ] 2+ complex, and, as a result, the increased effective Mg ion size. Finally, the calculated correlated transference numbers are lower than the uncorrelated ones even at the low concentration of 2 and 3 m, suggesting the enhanced correlations between ions in the multivalent electrolytes. This work provides a molecular-level understanding of how the solvation structure and multivalency of the ion affect the dynamics and transport properties of the multivalent electrolyte, providing insight for rational designs of electrolytes for improved ion transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Selective cobalt and nickel electrodeposition for lithium-ion battery recycling through integrated electrolyte and interface control

Abstract Molecularly-selective metal separations are key to sustainable recycling of Li-ion battery electrodes. However, metals with close reduction potentials present a fundamental challenge for selective electrodeposition, especially for critical elements such as cobalt and nickel. Here, we demonstrate the synergistic combination of electrolyte control and interfacial design to achieve molecular selectivity for cobalt and nickel during potential-dependent electrodeposition. Concentrated chloride allows for the speciation control via distinct formation of anionic cobalt chloride complex (CoCl 4 2- ), while maintaining nickel in the cationic form ([Ni(H 2 O) 5 Cl] + ). Furthermore, functionalizing electrodes with a positively charged polyelectrolyte (i.e., poly(diallyldimethylammonium) chloride) changes the mobility of CoCl 4 2- by electrostatic stabilization, which tunes cobalt selectivity depending on the polyelectrolyte loading. This strategy is applied for the multicomponent metal recovery from commercially-sourced lithium nickel manganese cobalt oxide electrodes. We report a final purity of 96.4 ± 3.1% and 94.1 ± 2.3% for cobalt and nickel, respectively. Based on a technoeconomic analysis, we identify the limiting costs arising from the background electrolyte, and provide a promising outlook of selective electrodeposition as an efficient separation approach for battery recycling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hydration Mimicry by Membrane Ion Channels

Ions transiting biomembranes might pass readily from water through ion-specific membrane proteins if these protein channels provide environments similar to the aqueous solution hydration environment. In fact, bulk aqueous solution is an important reference condition for the ion permeation process. Assessment of this hydration mimicry concept depends on understanding the hydration structure and free energies of metal ions in water in order to provide a comparison for the membrane channel environment. To refine these considerations, we review local hydration structures of ions in bulk water and the molecular quasi-chemical theory that provides hydration free energies. In doing so, we note some current views of ion binding to membrane channels and suggest new physical chemical calculations and experiments that might further clarify the hydration mimicry concept.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Monovalent ion–graphene oxide interactions are controlled by carboxylic acid groups: Sum frequency generation spectroscopy studies

Graphene oxide (GO) is a two-dimensional, mechanically strong, and chemically tunable material for separations. Elucidating GO–ion–water interactions at the molecular scale is highly important for predictive understanding of separation systems. However, direct observations of the nanometer region by GO surfaces under operando conditions are not trivial. Therefore, thin films of GO at the air/water interface can be used as model systems. With this approach, we study the effects of alkali metal ions on water organization near graphene oxide films at the air/water interface using vibrational sum frequency generation (SFG) spectroscopy. Here, we also use an arachidic acid Langmuir monolayer as a benchmark for a pure carboxylic acid surface. Theoretical modeling of the concentration-dependent sum frequency signal from graphene oxide and arachidic acid surfaces reveals that the adsorption of monovalent ions is mainly controlled by the carboxylic acid groups on graphene oxide. An in-depth analysis of sum frequency spectra reveals at least three distinct water populations with different hydrogen bonding strengths. The origin of each population can be identified from concentration dependent variations of their SFG signal. Interestingly, an interfacial water structure seemed mostly insensitive to the character of the alkali cation, in contrast to similar studies conducted at the silica/water interface. However, we observed an ion-specific effect with lithium, whose strong hydration prevented direct interactions with the graphene oxide film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

M + (M=Ca, Ba) Cations Bound to Molecular Cavities: A New Strategy for Incorporating Molecular Quantum States into Quantum Information

This project pursued a novel strategy for incorporating multiple qubits per ion into ion-trap based quantum computing (ITQC) involving Ca + and Ba + . By forming molecular complexes of these cations with molecular-scale cages, we hypothesized that molecular energy levels could be incorporated into quantum computing while retaining key properties of the atomic ions intact. We experimented with a variety of molecular cages and found that Na + , K + , Rb + , Ca 2+ , Sr 2+ , and Ba 2+ could be captured and brought into the gas phase efficiently by imbedding them inside [2.2.2]-benzocryptand. IR and UV spectra of these cage complexes are sensitive to the size and charge state of the ion, reporting on the structures and binding properties of the cage complexes. UV photofragmentation of the Ba 2+ -Acetate -1 -BzCrypt complex produces Ba + -BzCrypt, the complex targeted for exploration in the original hypothesis. Follow-on funding is needed to pursue the spectroscopy of this complex as a target for ITQC.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Interfacial Dark Aging Is an Overlooked Source of Aqueous Secondary Organic Aerosol

In this work, the relative yields of aqueous secondary organic aerosols (aqSOAs) at the air–liquid (a–l) interface are investigated between photochemical and dark aging using in situ time-of-flight secondary ion mass spectrometry (ToF-SIMS). Our results show that dark aging is an important source of aqSOAs despite a lack of photochemical drivers. Photochemical reactions of glyoxal and hydroxyl radicals (•OH) produce oligomers and cluster ions at the aqueous surface. Interestingly, different oligomers and cluster ions form intensely in the dark at the a–l interface, contrary to the notion that oligomer formation mainly depends on light irradiation. Furthermore, cluster ions form readily during dark aging and have a higher water molecule adsorption ability. This finding is supported by the observation of more frequent organic water cluster ion formation. The relative yields of water clusters in the form of protonated and hydroxide ions are presented using van Krevelen diagrams to explore the underlying formation mechanisms of aqSOAs. Large protonated and hydroxide water clusters (e.g., (H2O)nH+, 17 < n ≤ 44) have reasonable yields during UV aging. In contrast, small protonated and hydroxide water clusters (e.g., (H2O)nH+, 1 ≤ n ≤ 17) form after several hours of dark aging. Moreover, cluster ions have higher yields in dark aging, indicating the overlooked influence of dark aging interfacial products on aerosol optical properties. Molecular dynamic simulation shows that cluster ions form stably in UV and dark aging. AqSOAs molecules produced from dark and photochemical aging can enhance UV absorption of the aqueous surface, promote cloud condensation nuclei (CCN) activities, and affect radiative forcing.

Van Krevelen diagram↗
DOE OSTI2020

Transport phenomena in electrolyte solutions: Nonequilibrium thermodynamics and statistical mechanics

The theory of transport phenomena in multicomponent electrolyte solutions is presented here through the integration of continuum mechanics, electromagnetism, and nonequilibrium thermodynamics. The governing equations of irreversible thermodynamics, including balance laws, Maxwell's equations, internal entropy production, and linear laws relating the thermodynamic forces and fluxes, are derived. Green–Kubo relations for the transport coefficients connecting electrochemical potential gradients and diffusive fluxes are obtained in terms of the flux–flux time correlations. Furthermore, the relationship between the derived transport coefficients and those of the Stefan–Maxwell and infinitely dilute frameworks are presented, and the connection between the transport matrix and experimentally measurable quantities is described. To exemplify the application of the derived Green–Kubo relations in molecular simulations, the matrix of transport coefficients for lithium and chloride ions in dimethyl sulfoxide is computed using classical molecular dynamics and compared with experimental measurements.

42 ENGINEERING↗
DOE OSTI2024

Disorder-induced heating in molecular atmospheric pressure plasmas

Abstract Recent work has shown that ions are strongly coupled in atmospheric pressure plasmas when the ionization fraction is sufficiently large, leading to a temperature increase from disorder-induced heating (DIH) that is not accounted for in standard modelling techniques. Here, we extend this study to molecular plasmas. A main finding is that the energy gained by ions in DIH gets spread over both translational and rotational degrees of freedom on a nanosecond timescale, causing the final ion and neutral gas temperatures to be lower in the molecular case than in the atomic case. A model is developed for the equilibrium temperature that agrees well with molecular dynamics simulations. The model and simulations are also applied to pressures up to ten atmospheres. We conclude that DIH is a significant and predictable phenomena in molecular atmospheric pressure plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Solvation Energy of Ions in a Stockmayer Fluid

We calculate the solvation energy of monovalent and divalent ions in various liquids with coarse-grained molecular dynamics simulations. Our theory treats the solvent as a Stockmayer fluid, which accounts for the intrinsic dipole moment of molecules and the rotational dynamics of the dipoles. Despite the simplicity of the model, we obtain qualitative agreement between the simulations and experimental data for the free energy and enthalpy of ion solvation, which indicates that the primary contribution to the solvation energy arises mainly from the first and possibly second solvation shells near the ions. Our results suggest that a Stockmayer fluid can serve as a reference model that enables direct comparison between theory and experiment and may be invoked to scale up electrostatic interactions from the atomic to the molecular length scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Imaging a light-induced molecular elimination reaction with an X-ray free-electron laser

Tracking the motion of individual atoms during chemical reactions represents a severe experimental challenge, especially if several competing reaction pathways exist or if the reaction is governed by the correlated motion of more than two molecular constituents. Here we demonstrate how ultrashort X-ray pulses combined with coincident ion imaging can be used to trace molecular iodine elimination from laser-irradiated diiodomethane (CH 2 I 2 ), a reaction channel of fundamental importance but small relative yield that involves the breaking of two molecular bonds and the formation of a new one. We map bending vibrations of the bound molecule, disentangle different dissociation pathways, image the correlated motion of the iodine atoms and the methylene group leading to molecular iodine ejection, and trace the vibrational motion of the formed product. Our results provide a quantitative mechanistic picture behind previously suggested reaction mechanisms and prove that a variety of geometries are involved in the molecular bond formation.

Atomic and molecular interactions with photons↗
DOE OSTI2026

Field-driven ion pairing dynamics in concentrated electrolytes

Here, we investigate ion pairing dynamics in electrolytes driven far from equilibrium using molecular simulations and nonequilibrium rate theory. Focusing on 0.5M LiPF 6 in water and acetonitrile under uniform electric fields, we compute transition path theory observables, including reactive fluxes and mean first-passage times of ion pairing. Moreover, we introduce a dynamical proxy of free-ion population, where its field-induced change is strongly correlated with the nonlinear enhancement of conductivity, yielding an increase of 40% at 50 mV/Å in acetonitrile, compared to that of less than 10% in aqueous electrolytes. Further kinetic analysis elucidates that Onsager’s classical theory substantially overestimates field-induced enhancement of ion pair dissociation in molecular electrolytes. This discrepancy arises from solvent-mediated dynamical pathways and field-induced dielectric decrement that suppress ion pair dissociation within explicit solvents, highlighting that a faithful description of molecular details is essential. Our results provide a molecular interpretation of nonlinear electrolyte transport beyond continuum theories and establish a general framework for quantifying nonequilibrium reaction kinetics in condensed phase systems.

Moon, Seokjin [University of California, Berkeley,↗