Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOLECULAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Resolved Molecular Gas and Star Formation Properties of the Strongly Lensed z = 2.26 Galaxy SDSS J0901+1814

We present ~1'' resolution (~2 kpc in the source plane) observations of the CO (1–0), CO (3–2), Hα, and [N II ] lines in the strongly lensed z = 2.26 star-forming galaxy SDSS J0901+1814. We use these observations to constrain the lensing potential of a foreground group of galaxies, and our source-plane reconstructions indicate that SDSS J0901+1814 is a nearly face-on (i ≈ 30°) massive disk with r 1/2 ≳ 4 kpc for its molecular gas. Using our new magnification factors (μ tot ≈ 30), we find that SDSS J0901+1814 has a star formation rate (SFR) of ${268}_{-61}^{+63}\,{M}_{\odot }\,{\mathrm{yr}}^{-1}$, ${M}_{\mathrm{gas}}=({1.6}_{-0.2}^{+0.3})\times {10}^{11}({\alpha }_{\mathrm{CO}}/4.6)\,{M}_{\odot }$, and ${M}_{\star }=({9.5}_{-2.8}^{+3.8})\times {10}^{10}\,{M}_{\odot }$, which places it on the star-forming galaxy "main sequence." We use our matched high angular resolution gas and SFR tracers (CO and Hα, respectively) to perform a spatially resolved (pixel-by-pixel) analysis of SDSS J0901+1814 in terms of the Schmidt–Kennicutt relation. After correcting for the large fraction of obscured star formation (${\mathrm{SFR}}_{{\rm{H}}\alpha }/{\mathrm{SFR}}_{\mathrm{TIR}}={0.054}_{-0.014}^{+0.015}$), we find that SDSS J0901+1814 is offset from "normal" star-forming galaxies to higher star formation efficiencies independent of assumptions for the CO-to-H 2 conversion factor. Our mean best-fit index for the Schmidt–Kennicutt relation for SDSS J0901+1814, evaluated with different CO lines and smoothing levels, is $\bar{n}=1.54\pm 0.13;$ however, the index may be affected by gravitational lensing, and we find $\bar{n}=1.24\pm 0.02$ when analyzing the source-plane reconstructions. While the Schmidt–Kennicutt index largely appears unaffected by which of the two CO transitions we use to trace the molecular gas, the source-plane reconstructions and dynamical modeling suggest that the CO (1–0) emission is more spatially extended than the CO (3–2) emission.

79 ASTRONOMY AND ASTROPHYSICS↗

The energetics of molecular clouds. II - The S140 molecular cloud

Techniques of analysis which allow estimates of kinetic temperature, gas density, gas cooling rate, and dust cooling rate are applied to the S140 molecular cloud. Maps of this cloud in various molecular lines are examined which reveal the existence of a strong temperature and density peak near the H-alpha rim and the presence of a strong near-IR source very near that peak. This source is found to have an energy distribution which is very similar to that of the Becklin-Neugebauer object, including the silicate feature at 9.5 microns. The heating and cooling rates for the gas and dust in S140 are estimated, and the predicted cooling rate for dust is shown to be much greater than that for gas. The molecular-line observations are compared with a spherical large-velocity-gradient trapping calculation. An optimum cloud model is developed which indicates that: (1) (C-13)O, HCO(+), and H2CO are about 10 times less abundant in S140 than in dark clouds; (2) the HCN abundance is approximately 4 times the H2CO abundance in S140, compared with roughly equal values in dark clouds; and (3) the (C-13)O/C(O-18) ratio is consistent with terrestrial isotope ratios.

Blair, G. N.↗

The energetics of molecular clouds. III - The S235 molecular cloud

The molecular cloud associated with the S235 H II region has been studied by means of molecular lines and near-infrared observations. The cloud consists of two components, one of which partly surrounds the S235 H II region. The other component contains a dense, hot region of active star formation, marked by self-reversed CO profiles, compact H II regions, masers, and infrared sources. From the molecular line data, the size and mass of the two components are estimated to be 6-8 pc and 3000-4000 solar masses. More detailed studies near the region of active star formation yield estimates of density (approximately 200,000-500,000/cu cm) and the abundances of H2CO, HCO(+), HCN, and (C-13)O. Analysis of the energetics suggests that the cloud is heated by the exciting star of S235 and by the exciting stars of the compact H II regions. Assuming that the gas is heated by collisions with warm dust grains, the far-infrared luminosity has been predicted. The observations of far-infrared emission are in reasonable agreement with predictions.

Evans, N. J., II↗

Understanding the high pressure properties of molecular solids and molecular surfaces deposited on hetrogeneous substrates

Work directed toward understanding the high pressure properties of molecular solids and molecular surfaces deposited on hetrogeneous substrates is reported. The motivation, apart from expanding our basic knowledge about these systems, was to understand and predict the properties of new materials synthesized at high pressure, including pressure induced metallic and superconducting states. As a consequence, information about the states of matter of the Jovian planets and their satellites, which are natural high pressure laboratories was also provided. The work on molecular surfaces and finite two and three dimensional clusters of atoms and molecules was connected with the composition and behavior of planetary atmospheres and on the processes involved in forming surface layers, which is vital to the development of composite materials and microcircuitry.

Etters, R. D.↗

A non-mass-dependent oxygen isotope effect in the production of ozone from molecular oxygen - The role of molecular symmetry in isotope chemistry

It was previously reported that the reaction products from the synthesis of ozone in an electric discharge through molecular oxygen display a nonmass-dependent (NoMaDic) oxygen isotope effect. In this paper, a detailed characterization of the isotope effect, including the effect of molecular oxygen pressure, and the presence of a chemically inert third body (helium), is reported. The NoMaDic effect is due to an isotopically selective stabilization of the O3 formation reaction intermediate, possibly resulting from the ability of the different isotopomers to exhibit different molecular symmetries.

Heidenreich, J. E., III↗

A spectacular molecular outflow in the Monoceros OB1 molecular cloud

Detailed observations of CO, CS, IR continuum, and H2 emission from a large, highly collimated, bipolar outflow in the Monoceros OB1 molecular cloud are presented. The CO observations suggest that molecular gas in the outflow is contained in a shell with higher velocity material situated interior to lower velocity material. The velocities of outflow emission are found to increase with increasing distance from the center of the outflow. Additional detections include shock-excited molecular hydrogen emission from the blueshifted lobe of the outflow and six 2-micron sources in the direction of the outflow. Near-IR and IRAS observations suggest that the driving source for the outflow must have a bolometric luminosity below about 4.5 solar luminosities. It is concluded that the flow is probably not driven by stellar radiation from a central source.

Margulis, Michael↗

High spectral resolution observations of fluorescent molecular hydrogen in molecular clouds

The 1-0 S(1) line of molecular hydrogen has been observed at high spectral resolution in several sources where the emission was suspected of being fluorescent. In NGC 2023, the Orion Bar, and Parsamyan 18, the S(1) line is unresolved, and the line center close to the rest velocity of the ambient molecular cloud. Such behavior is expected for UV-excited line emission. The H2 line widths in molecular clouds thus can serve as diagnostic for shocked and UV-excitation mechanisms. If the lines are broader than several km/s or velocity shifts are observed across a source it is likely that shocks are responsible for the excitation of the gas.

Burton, Michael G.↗

Warm neutral halos around molecular clouds. IV - H I and continuum: Aperture synthesis observations towards the molecular cloud B5

We present aperture synthesis observations of H I (21 cm) line radiation and continuum emission at 408 and 1420 MHz towards a field centered on the molecular cloud B5. The H I emission shows an extended atomic halo around the molecular cloud. The opacity of the halo is derived using H I absorption toward several background sources and a simple source model is presented. The model indicates that the halo is not gravitationally bound to the molecular cloud and that it is in fact expanding away from it. Approximately 350 solar masses are contained in the H I halo. Flux densities and spectral indices for the sources detected in both of the continuum bands are given.

Andersson, B.-G.↗

New insights into the mechanism governing the elasticity of calcium silicate hydrate gels exposed to high temperature: A molecular dynamics study

When exposed to fire, the integrity of cement-based materials is governed by thermally-induced changes in the mechanical properties of their binding phase, i.e., the calcium–silicate–hydrate (C–S–H) gel. However, the effect of temperature on the structure, density, and mechanical properties of C–S–H remains only partially known. Here, based on reactive molecular dynamics simulations, we reveal the nature of thermally-induced damage in C–S–H gels. In general, we show that, at the atomic scale, exposure to high temperature results in partial dehydration, volumetric shrinkage, disordering, and stiffening in the C–S–H grains. However, we show that the thermal response of C–S–H strongly depends on its chemical composition, wherein C–S–H systems associated with lower Ca/Si molar ratios are able to undergo higher temperatures before amorphization. Based on these results, we demonstrate that the stiffness of C–S–H gels (i.e., including porosity—as probed by nanoindentation) is governed by a competition between the stiffening of the grains and the decrease in packing density—wherein the latter eventually become predominant.

36 MATERIALS SCIENCE↗

Combustion chemistry of the propanol isomers - investigated by electron ionization and VUV-photoionization molecular-beam mass spectrometry

The combustion of 1-propanol and 2-propanol was studied in low-pressure, premixed flat flames using two independent molecular-beam mass spectrometry (MBMS) techniques. For each alcohol, a set of three flames with different stoichiometries was measured, providing an extensive data base with in total twelve conditions. Profiles of stable and intermediate species, including several radicals, were measured as a function of height above the burner. The major-species mole fraction profiles in the 1-propanol flames and the 2-propanol flames of corresponding stoichiometry are nearly identical, and only small quantitative variations in the intermediate species pool could be detected. Differences between flames of the isomeric fuels are most pronounced for oxygenated intermediates that can be formed directly from the fuel during the oxidation process. The analysis of the species pool in the set of flames was greatly facilitated by using two complementary MBMS techniques. One apparatus employs electron ionization (EI) and the other uses VUV light for single-photon ionization (VUV-PI). The photoionization technique offers a much higher energy resolution than electron ionization and as a consequence, near-threshold photoionization-efficiency measurements provide selective detection of individual isomers. The EI data are recorded with a higher mass resolution than the PI spectra, thus enabling separation of mass overlaps of species with similar ionization energies that may be difficult to distinguish in the photoionization data. The quantitative agreement between the EI- and PI-datasets is good. In addition, the information in the EI- and PI-datasets is complementary, aiding in the assessment of the quality of individual burner profiles. The species profiles are supplemented by flame temperature profiles. The considerable experimental efforts to unambiguously assign intermediate species and to provide reliable quantitative concentrations are thought to be valuable for improving the mechanisms for higher alcohol combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decomposition of Amino Diazeniumdiolates (NONOates): Molecular Mechanisms

Although diazeniumdiolates (X[N(O)NO]-) are extensively used in biochemical, physiological, and pharmacological studies due to their ability to slowly release NO and/or its congeneric nitroxyl, the mechanisms of these processes remain obscure. In this work, we used a combination of spectroscopic, kinetic, and computational techniques to arrive at a qualitatively consistent molecular mechanism for decomposition of amino diazeniumdiolates (amino NONOates: R2N[N(O)NO]-, where R = -N(C2H5)2 (1), -N(C3H4NH2)2 (2), or -N(C2H4NH2)2 (3)). Decomposition of these NONOates is triggered by protonation of their [NN(O)NO]- group with apparent pKa and decomposition rate constants of 4.6 and 1 s-1 for 1-H, 3.5 and 83 x 10-3 s-1 for 2-H, and 3.8 and 3.3 x 10-3 s-1 for 3-H. Although protonation occurs mainly on the O atoms of the functional group, only the minor R2N(H)N(O)NO tautomer (population ~0.01%, for 1) undergoes the N-N heterolytic bond cleavage (k ~102 s-1 for 1) leading to amine and NO. Decompositions of protonated amino NONOates are strongly temperature-dependent; activation enthalpies are 20.4 and 19.4 kcal/mol for 1 and 2, respectively, which includes contributions from both the tautomerization and bond cleavage. The bond cleavage rates exhibit exceptional sensitivity to the nature of R substituents which strongly modulate activation entropy. At pH < 2, decompositions of all these NONOates are subject to additional acid catalysis that occurs through di-protonation of the [NN(O)NO]- group.

amino↗

Reactive Molecular Dynamics Simulations and Quantum Chemistry Calculations To Investigate Soot-Relevant Reaction Pathways for Hexylamine Isomers

Sooting tendencies of a series of nitrogen-containing hydrocarbons (NHCs) have been recently characterized experimentally using the yield sooting index (YSI) methodology. This work aims to identify soot-relevant reaction pathways for three selected C6H15N amines, namely, dipropylamine (DPA), diisopropylamine (DIPA), and 3,3-dimethylbutylamine (DMBA) using ReaxFF molecular dynamics (MD) simulations and quantum mechanical (QM) calculations and to interpret the experimentally observed trends. ReaxFF MD simulations are performed to determine the important intermediate species and radicals involved in the fuel decomposition and soot formation processes. QM calculations are employed to extensively search for chemical reactions involving these species and radicals based on the ReaxFF MD results and also to quantitatively characterize the potential energy surfaces. Specifically, ReaxFF simulations are carried out in the NVT ensemble at 1400, 1600, and 1800 K, where soot has been identified to form in the YSI experiment. These simulations account for the interactions among test fuel molecules and pre-existing radicals and intermediate species generated from rich methane combustion, using a recently proposed simulation framework. ReaxFF simulations predict that the reactivity of the amines decrease in the order DIPA > DPA > DMBA, independent of temperature. Both QM calculations and ReaxFF simulations predict that C2H4, C3H6, and C4H8 are the main nonaromatic soot precursors formed during the decomposition of DPA, DIPA, and DMBA, respectively, and the associated reaction pathways are identified for each amine. Both theoretical methods predict that sooting tendency increases in the order DPA, DIPA, and DMBA, consistent with the experimentally measured trend in YSI. This work demonstrates that sooting tendencies and soot-relevant reaction pathways of fuels with unknown chemical kinetics can be identified efficiently through combined ReaxFF and QM simulations. Overall, predictions from ReaxFF simulations and QM calculations are consistent, in terms of fuel reactivity, major intermediates, and major nonaromatic soot precursors.

fuel decomposition↗

Photoinduced Anomalous Coulomb Blockade and the Role of Triplet States in Electron Transport through an Irradiated Molecular Transistor

In the present study, we explore photoinduced electron transport through a molecule weakly coupled to two electrodes by combining first-principles quantum chemistry calculations with a Pauli master equation approach that accounts for many-electron states. In the incoherent limit, we demonstrate that energy-level alignment of triplet and charged states plays a crucial role, even when the rate of intersystem crossing is much smaller than the rate of fluorescence. Furthermore, the field intensity dependence and an upper bound to the photoinduced electric current can be analytically derived in our model. Under an optical field, the conductance spectra (charge stability diagrams) exhibit unusual Coulomb diamonds, which are associated with molecular excited states, and their widths can be expressed in terms of energies of the molecular electronic states. This study offers new directions for exploring optoelectronic response in nanoelectronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of Molecular Structure on X-ray Diffraction in Thermotropic Uniaxial and Biaxial Nematic Liquid Crystal Phases

X-ray diffraction is one of the most definitive methods to determine the structure of condensed matter phases, and it has been applied to unequivocally infer the structures of conventional calamitic and lyotropic liquid crystals. With the advent of bent-core and tetrapodic mesogens and the discovery of the biaxial nematic phase in them, the experimental results require more careful interpretation and analysis. Here, we present ab-initio calculations of X-ray diffraction patterns in the isotropic, uniaxial nematic, and biaxial nematic phases of bent-core mesogens. A simple Meier-Saupe-like molecular distribution function is employed to describe both aligned and unaligned mesophases. The distribution function is decomposed into two, polar and azimuthal, distribution functions to calculate the effect of the evolution of uniaxial and biaxial nematic orientational order. The calculations provide satisfactory semiquantitative interpretations of experimental results. The calculations presented here should provide a pathway to more refined and quantitative analysis of X-ray diffraction data from the biaxial nematic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isobaric-Isothermal Molecular Dynamics Simulations Utilizing Density Functional Theory: An Assessment of the Structure and Density of Water at Near-Ambient Conditions

We present herein, a comprehensive density functional theory study towards assessing the accuracy of two popular gradient corrected exchange correlation functionals on the structure and density of liquid water at near ambient conditions in the isobaric-isotherma ensemble. Our results indicate that both PBE and BLYP functionals underpredict the density and overstructure the liquid. Adding the dispersion correction due to Grimme [1, 2] improves the predicted densities for both BLYP and PBE in a significant manner. Moreover, the addition of the dispersion correction for BLYP yields an oxygen-oxygen radial distribution function in excellent agreement with experiment. Thus, we conclude that one can obtain a very satisfactory model for water using BLYP and a correction for dispersion. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program, and was performed in part using the Molecular Science Computing Facility (MSCF) in the William R. Wiley Environmental Molecular Sciences Laboratory, a DOE national scientific user facility located at the Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for DOE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of different plasma species (atomic N, metastable N{sub 2}*, and ions) on the optical properties of dilute nitride materials grown by plasma-assisted molecular-beam epitaxy

This letter studies the effects of atomic N, metastable N{sub 2}*, and ionic species on the optical properties of dilute nitride materials. Ga{sub 0.8}In{sub 0.2}N{sub 0.01}As{sub 0.99} was grown using a 1% N{sub 2} in Ar gas mix from an Applied-Epi Unibulb rf plasma source. Isonitrogen samples with and without ions were studied using various plasma operating conditions. Optical emission spectrometry was used to characterize relative proportions of different active nitrogen plasma species (atomic N and metastable N{sub 2}*). Samples grown without ions and with a higher proportion of atomic N resulted in the best overall material quality, although this improvement was observed at high annealing temperatures. At lower annealing temperatures, increased blueshifts were observed for samples grown with a higher proportion of atomic N; however, there was no noticeable influence of ions on blueshift regardless of whether atomic N or metastable N{sub 2}* was the dominant species present in the plasma. The key implication of this work is that it helps to elucidate a possible reason for some of the contradictory reports in the literature. The ions are not solely responsible for the commonly reported ''plasma damage.'' Furthermore, we demonstrate herein that atomic N and metastable N{sub 2}* each have different effects on the optical properties of dilute nitride materials grown by plasma-assisted molecular-beam epitaxy.

36 MATERIALS SCIENCE↗