Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MEMBRANES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Gaseous contaminant transfer in membrane-based air-to-air energy exchangers

Membrane-based air-to-air energy exchangers (M–AAEEs) transfer heat and moisture between building exhaust air and fresh ventilation air streams through a membrane, thereby reducing the energy required for conditioning the fresh ventilation air. Energy exchangers are typically used in buildings with relatively clean building exhaust air, such as office buildings and schools. Recently interest in using energy exchangers in a wider range of buildings has grown, to reduce the energy consumption associated with the heating, ventilating, and air-conditioning (HVAC) systems in these buildings. However, if the building exhaust air is not clean, as would be the case for laboratories or factories, new risks are encountered when using energy exchangers. It is possible that gaseous contaminants in the exhaust air may also transfer along with the moisture through the membranes, contaminating the incoming fresh ventilation air. Current test standards provide a test procedure to determine the contamination of the fresh ventilation air by measuring the transfer of an inert tracer gas in an energy exchanger. However, the tracer gas test may not represent the transfer of common indoor air contaminants due to differences in their transport properties. Therefore, in this study, an experimental facility is developed to determine the transfer of seven different contaminants through two membranes (porous and dense) at different flow rates. Contaminant transfer is quantified using a parameter called the exhaust contaminant transfer ratio (ECTR), which gives the fraction of the contaminants transferred from the exhaust air to the fresh ventilation air. A theoretical model based on the effectiveness-number of transfer units (ε-NTU) correlation and moisture transfer resistance of the membrane is presented to determine transfer through porous membranes and validated with experimental results. The major contribution of this paper is that it presents a simple method to predict the transfer of different contaminants through a porous membrane based on the moisture transfer resistance of the membrane at different operating conditions. It is found that as contaminant diffusivity decreases, ECTR generally also decreases, and as the flow rate increases, ECTR decreases, which is consistent with the predictions from the correlation.

42 ENGINEERING↗
DOE OSTI2026

KRAS4a and KRAS4b show distinct lipid-dependent regulation of RAS-RAF membrane dynamics

KRAS4a and KRAS4b are important regulators of signaling, and their interactions with the plasma membrane are dynamic and influenced by lipid composition. KRAS 4a and 4b have nearly identical globular domains but differ in their membrane-associated hyper variable region (HVR). The functional distinctions between these isoforms remain unclear, particularly with regards to their dependence on specific lipids and the membrane environment. Previous work showed that the membrane orientation of KRAS4b affects its ability to bind to RAF kinase RBDCRD and that the KRAS–RBDCRD complex adopts different poses on the membrane as well as influences the size and composition of the lipid environment. To model differences between KRAS 4a and 4b protein–lipid interactions, we extended the Multiscale Machine-Learned Modeling Infrastructure (MuMMI) to incorporate continuum simulations in the grand canonical ensemble, enabling sampling across macroscopic, coarse-grained, and all-atom resolutions. Using this framework, we systematically altered PIP2 concentrations, KRAS 4a versus 4b, and RAF RBDCRD complexation to assess impacts on membrane–protein interactions and dynamics. Our results reveal that reducing PIP2 shifts and broadens the membrane orientational preference of both KRAS 4b and 4a, with stronger effects on 4b HVR localization versus 4a. We demonstrate that with depletion of the strong negatively charged PIP2 lipid, the less charged phosphatidylserine replaces PIP2. Our findings highlight similarities and distinctions in the dynamics and lipid dependency of KRAS isoforms and suggest that ordering of the local lipid composition by HVRs is a shared property and key modulator of RAS-mediated signaling at the plasma membrane.

Biological and medical sciences↗
DOE OSTI2022

Accurately measuring the ionic conductivity of membranes via the direct contact method

Accurately measuring the ionic conductivity of membranes is important both for assessing the performance of new membranes as well as for advancing the fundamental understanding of electric field-driven ion transport in membranes. Yet, despite a considerable number of reports on the topic, there is no standardized method for ionic conductivity measurements. One of the main challenges with ionic conductivity measurements is isolating the membrane resistance from the other resistances in the electrochemical cell. In this study, we present a detailed discussion of factors that affect ionic conductivity measurements with the commonly used direct contact method, in which the membrane contacts the electrodes. Such factors include external resistances due to imperfect contact between the membrane and electrodes, residual impedances due to the sample holder and wiring, and fringe effects. Further, we also present and validate simple methods for isolating the true membrane ionic conductivity in both the through-plane and in-plane orientations. These methods can be implemented with virtually any membrane to obtain accurate and reproducible ionic conductivity values. Finally, we outline recommendations for performing ionic conductivity measurements with the direct contact method and a set of parameters to verify when reporting these results.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Selective concentration of multivalent cations via electrodialysis through tandem membranes

Selective electrodialysis is attractive for recovering and recycling valuable ions. However, most studies in this field focus on membranes that are selective for monovalent ions. Multivalent cations preferentially partition into cation-exchange membranes, but low mobilities and concentration polarization limit electrodialysis selectivities for these cations. This work employs electrodialysis through an “in-series” combination of a Nafion membrane and a multilayer polyelectrolyte film (MPF)-coated Nafion membrane to concentrate and isolate La 3+ or Mg 2+ from monovalent ions. The bare Nafion membrane gives a La 3+ /Na + selectivity up to 4 (depending on conditions), which enables concentration of La 3+ with a high current efficiency. The MPF-coated membrane allows selective passage of Na + while rejecting La 3+ to increase the purity of the concentrated multivalent cation. For example, the concentration of La 3+ in the accumulation solution can reach 9 times its original concentration in the feed solution with a purity of 93 mol% (99 wt%) when starting with equimolar mixtures of NaNO 3 and La(NO 3 ) 3 . This study examines how the separation varies with the type of polyelectrolyte, the applied voltage, and the composition of feed, accumulation, and cathode solutions. Here, a high nitric acid concentration (0.5 M) in the cathode compartment allows monovalent anions to pass through the MPF-coated Nafion membrane to maintain the electroneutrality of the accumulation solution. With a low acid concentration (0.04 M) in the cathode chamber, water splitting occurs at the MPF-coated membrane and La(OH) 3 precipitates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nonstereotypical Distribution and Effect of Ergosterol in Lipid Membranes

Ergosterol, found in fungi and some protist membranes, is understudied compared with cholesterol from animal membranes. Generally, ergosterol is assumed to modulate membranes in the same manner as cholesterol, based on their similar chemical structures. Here we reveal some fundamental structural and dynamical differences between them. Neutron diffraction shows that ergosterol is embedded in the lipid bilayer much shallower than cholesterol. Further, ergosterol does not change the membrane thickness as much as cholesterol does, indicating little condensation effect. Neutron spin echo shows that ergosterol can rigidify and soften membranes at different concentrations. The lateral lipid diffusion measured by quasielastic neutron scattering indicates that ergosterol promotes a jump diffusion of the lipid, whereas cholesterol keeps the same continuous lateral diffusion as the pure lipid membrane. Our results point to quite distinct interactions of ergosterol with membranes compared with cholesterol. These insights provide a basic understanding of membranes containing ergosterol with implications for phenomena such as lipid rafts and drug interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

(2 + δ)-dimensional theory of the electromechanics of lipid membranes: Electrostatics

The coupling of electric fields to the mechanics of lipid membranes gives rise to intriguing electromechanical behavior, as, for example, evidenced by the deformation of lipid vesicles in external electric fields. Electromechanical effects are relevant for many biological processes, such as the propagation of action potentials in axons and the activation of mechanically gated ion channels. Currently, a theoretical framework describing the electromechanical behavior of arbitrarily curved and deforming lipid membranes does not exist. Purely mechanical models commonly treat lipid membranes as two-dimensional surfaces, ignoring their finite thickness. While holding analytical and numerical merit, this approach cannot describe the coupling of lipid membranes to electric fields and is thus unsuitable for electromechanical models. In a sequence of articles, we derive an effective surface theory of the electromechanics of lipid membranes, called the (2 + δ)-dimensional theory, which has the advantages of surface descriptions while accounting for finite thickness effects. The present article proposes a generic dimension reduction procedure relying on low-order spectral expansions. This procedure is applied to the electrostatics of lipid membranes to obtain the (2 + δ)-dimensional theory that captures potential differences across and electric fields within lipid membranes. Finally, this model is tested on different geometries relevant for lipid membranes, showing good agreement with the corresponding three-dimensional electrostatics theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bipolar Membranes Electrodialysis for Water Purification and Resource Recovery

Reverse osmosis concentrate (ROC) from inland brackish water desalination and wastewater recycling presents moderate salinity, posing significant challenges for treatment and disposal. Existing treatment technologies predominantly rely on energy-intensive thermal methods, large-area evaporation strategies, or deep-well disposal, which often result in the loss of water value. Electrified membrane brine treatment offers a promising alternative by utilizing renewable energy sources, enabling complete water recycling. This work proposes the development of next-generation bipolar membrane electrodialysis (BMED) systems capable of desalinating brine while simultaneously recovering valuable resources. However, several critical challenges remain in the areas of membrane engineering for BMED. These include: 1) decreased current efficiency during desalination due to the low conductivity of feed chambers, 2) fouling and scaling from multivalent ions and contaminants in the feed, and 3) the retention and carryover of ROC contaminants, including PFAS compounds. Our research focuses on the development of novel anion exchange membranes (AEMs) and cation exchange membranes (CEMs) based on synthesized multiblock copolymers. We investigate the effects of block length, ion exchange capacity (IEC), and polymer backbone structure on cation and anion transport (e.g., Na+, Cl-, OH-, H+) for both our synthesized membranes and commercial membranes. Fundamental properties of these membranes, such as water uptake, IEC, and ionic conductivity, are also evaluated to optimize performance for BMED applications.

08 HYDROGEN↗
DOE OSTI2020

Amine-Containing Membranes with Functionalized Multi-Walled Carbon Nanotubes for CO2/H2 Separation

Amine-containing mixed-matrix membranes incorporated with amino-functionalized multi-walled carbon nanotubes (AF-MWNTs) were synthesized for CO2/H2 separation based on the facilitated transport mechanism. AF-MWNTs were chosen primarily as the mechanical reinforcing filler to enhance the membrane stability. At 107 °C and 0.2-MPa feed pressure, the membrane incorporated with 10 wt.% AF-MWNTs showed a CO2 permeability of 3196 Barrers and a CO2/H2 selectivity of 205. At the higher feed pressure of 1.5 MPa, owing to the carrier saturation phenomenon, the same membrane exhibited reduced transport performance with a CO2 permeability of 776 Barrers and a CO2/H2 selectivity of 31. These separation performances at both the low and high feed pressures were well above the theoretical upper bound. Furthermore, the incorporation of 10 wt.% AF-MWNTs led to a significant improvement on membrane stability. The transport performance and selective layer thickness of this membrane maintained for 100 h, which suggested that the incorporation of AF-MWNTs improved the resistance to membrane compaction upon a high feed pressure. Therefore, this work is considered as one of the crucial steps to enable the application of facilitated transport membranes to high-pressure gas processing such as syngas purification.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Visible-Light-Activated Photocatalytic Films toward Self-Cleaning Membranes

Membranes are among the most promising means of delivering increased supplies of fit-for-purpose water, but membrane fouling remains a critical issue restricting their widespread application. Coupling photocatalysis with membrane separation has been proposed as a potentially effective approach to reduce membrane fouling. However, commonly used materials in photocatalysis limit use of low-cost sources such as sunlight due to their large band gaps. There are few examples of in situ photocatalytic self-cleaning of membranes, with removal from the filtration system and ex situ illumination being more common. In this study, a visible-light-activated photocatalytic film prepared by nitrogen doping into the lattice of TiO 2 was deposited on commercial ceramic membranes via atomic layer deposition (ALD). The synergy between membrane separation and redox reactions between organic pollutants and reactive oxygen species (ROS) produced by the visible-light-activated layer offers a possibility for stable and sustainable membrane operation under in situ solar irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Integrated membrane material design and system synthesis

In designing membrane systems, the synergy between membrane materials and the process design is often overlooked. In this paper, we present a mixed-integer nonlinear programming (MINLP) model for synthesizing membrane systems while simultaneously designing the respective membrane materials for multicomponent gas separation. The approach considers superstructure representations for systems with: (1) same, (2) potentially different, and (3) property-targeting membrane materials. In the first two systems, the selection of membrane material is a decision, while in the final type, membrane permeances are subject to optimization. Physics-based surrogate models are used to describe permeation in crossflow and countercurrent flow permeators. We show that, through a case study of biogas upgrading, our approach obtains high quality solutions. Furthermore, we use the proposed approach while considering permeance-based production cost to find the optimal membrane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comparative analysis of various pretreatments to mitigate fouling and scaling in membrane distillation

Membrane distillation (MD) has shown strong promise for treating hypersaline produced water (PW) streams. Scaling and fouling on the membrane surface, however, have been identified as major challenges for commercialization and widespread application. The focus of this study was to first identify the nature of foulants and scalants on the membrane surface and then investigate the pretreatment strategies that mitigate the extent of fouling and scaling on the membrane surface. Vacuum MD (VMD) was selected for this study because of its higher flux at more moderate feed temperatures that eventually leads better assessment of fouling and scaling on the membrane surface. VMD flux tests were carried out with three different real PW samples at total dissolved solids concentrations in the range of 120-160 g/L. It was found that an efficient pretreatment prior to MD is required to mitigate the fouling potential of the organic matter, mostly suspended constituents, in PW samples. Suspended organics fouled and quickly wetted the MD membrane. Major conventional treatments, including filtration, oxidation, coagulation, air floatation, and aeration were investigated to pretreat the PW before VMD tests. A comprehensive comparative analysis is presented showing that the ultrafiltration and coagulation pretreatments displayed the best performance in mitigating the fouling and scaling, while oxidative pretreatment was found to be effective in reducing the iron concentration to less than 5 ppm. The surface of scaled membranes was carefully characterized to further evaluate the performance of each pretreatment. The components that had the highest tendency to precipitate on the membrane surface were identified as strontium sulfate, calcium carbonate, sodium chloride, iron oxide, and silica. In closing, these findings are supported by thermodynamic estimation of the saturation index.

42 ENGINEERING↗
DOE OSTI2023

Demonstrating non-isothermal vacuum membrane air dehumidification for efficient next-generation air conditioning

Vacuum membrane air dehumidification has gained significant interest in recent years as a highly efficient means of air dehumidification. Prior theoretical modeling work by the authors introduced the Active Membrane Energy Exchanger (AMX) concept, which combines active heat exchange and vacuum membrane dehumidification into one non-isothermal system, and found that it could outperform other air conditioning technologies under many conditions. However, no experimental literature exists on combining active heat exchangers and vacuum membrane dehumidification. Here, the goal of the present study is to evaluate the dehumidification (mass transfer) performance of the AMX concept relative to isothermal membrane dehumidification through three main methodologies: (1) membrane material-level characterization, (2) experimental prototype development and testing, and (3) computational fluid dynamics (CFD) simulations. The dense membranes used in this work showed up to a 40% increase in water vapor permeance at cooler temperatures, and the prototype system showed up to a 6% increase in humidity removal when the air was simultaneously cooled. Furthermore, the membrane module-integrated heat exchange tubes provided additional mixing and turbulence, leading to a 4–8% increase in humidity removal. The upper limit coefficient of performance was equal to approximately 2.2, necessitating advanced system designs to improve efficiency. This study is the first to highlight that combining the cooling and vacuum dehumidification processes can improve dehumidification performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

CO 2 -selective membranes containing amino acid salts for CO 2 /N 2 separation

In this paper, facilitated transport membranes comprising polyvinylamine (PVAm) as fixed carrier and different amino acid salts (AAS) as mobile carriers were synthesized for post-combustion capture. The AAS carriers were prepared by deprotonating alanine (Ala), lysine (Lys), and proline (Pro) with 2-(1-piperazinyl)ethylamine (PZEA). CO 2 separation performances of the membranes with these AAS carriers were compared, and the AAS effectiveness to facilitate transport of CO 2 was in the order of PZEA-Pro > PZEA-Lys > PZEA-Ala. Here, the membrane comprising 35 wt.% PVAm and 65 wt.% PZEA-Pro at 57 °C rendered a promising CO 2 permeance of 936 GPU and a CO 2 /N 2 mixed gas selectivity of 193. When the PVAm was reduced to 15 wt.%, i.e., its 20 wt.% was replaced by the mobile carrier of PZEA-Sar (sarcosinate), the permeance further improved to 947 GPU with a remarkable CO 2 /N 2 selectivity of 210. Moreover, thermal gravimetric analysis showed a good thermal stability of the membrane, and membrane stability testing also gave stable transport performance. Furthermore, spectroscopic ellipsometry analysis exhibited a uniform membrane selective layer and an excellent agreement on the membrane thickness of ca. 170 nm measured independently by SEM. In addition, the membranes presented in this paper surpassed both the Robeson upper bound and the modified upper bound, indicating a great potential for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Benchmark CO 2 separation achieved by highly fluorinated nanoporous molecular sieve membranes from nonporous precursor via in situ cross-linking

Molecular sieve membranes with rigid micropores and CO 2 -philic functionalities within the architectures are promising candidates in CO 2 separation. However, the development of ctieve approaches for their fabrication still remains a significant challenge. In this study, an in situ cross-linking strategy is developed for the preparation of nanoporous fluorinated moleffecular sieve membranes using commercially available dense and non-porous polystyrene (M PS ) as a precursor template. Based on the dehydrative Friedel-Crafts reactions with highly fluorinated benzylic alcohols, M PS membranes are cross-linked in situ upon exposure to Brønsted acid (CF 3 SO 3 H), affording fluorinated microporous polymeric membranes with surface areas up to 523 m 2 g –1 and the presence of micropores centered at 1.1–1.3 nm as well as ultra-micropores (~0.6 nm). The obtained modified membranes exhibit good ideal CO 2 permeability of 797 barrer and CO 2 /N 2 selectivity of 28.5. In addition, high fluorine content (up to 28.5 wt%) and good thermal stability made the cross-linked membranes promising candidates to produce fluorinated carbon molecular sieve membranes with improved textural properties, exhibiting surface areas up to 1020 m 2 g –1 and ultra-micropores of ~0.4 nm. These membranes achieve superior CO 2 /N 2 separation performances exceeding the Robeson upper bound limit (2008).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecular design and fabrication of PIM-1/polyphosphazene blend membranes with high performance for CO 2 /N 2 separation

New polymeric blend membranes for CO 2 separation were synthesized based on insights from molecular dynamics simulation. A molecular-level structure-property relationship in polymers of intrinsic microporosity (PIM) based blend membranes, was investigated in detail computationally. Calculated local density profiles and energy of interaction of the blend membranes, composed of PIM-1 and various polyphosphazenes, showed that using the polyphosphazene with a higher concentration of ether side chains can improve the compatibility with PIM-1. Furthermore, based on the findings of computational studies, blend membranes were experimentally fabricated from PIM-1 and polyphosphazenes with various polyether side chain concentrations. Polyether concentration in polyphosphazenes was correlated with the film properties and gas transport performance of the blend membranes. Blend membranes showed very high CO 2 permeability (3100-5300 barrer) and improved CO 2 /N 2 selectivity (24-28), outperforming all other PIM-based blend membranes reported to date. Moreover, the CO 2 permeability performance of the blend membranes was tested 566 hours under real post-combustion flue gas from a coal-fired power plant, including CO 2 , N 2 , H 2 O, O 2 , SO x and NO x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Polystyrene sulfonate (PSS) stabilized polyethylenimine (PEI) membranes fabricated by spray coating for highly effective CO 2 /N 2 separation

Greenhouse effect, largely caused by CO 2 emission, has become a major concern for global climate change. Post-combustion CO 2 capture is one of the critical strategies to mitigate this issue. Membrane technology for carbon capture has drawn significant attention because of the cost and energy efficiency and scalability. Many membranes for CO 2 capture are limited by the trade-off between CO 2 permeability and CO 2 /N 2 selectivity and the long-term stability under practical operating conditions. Facilitated transport membranes with efficient CO 2 carriers have demonstrated potential to surpass the permeability-selectivity trade-off, but these carriers are often lost under operational conditions. In this work, we designed and fabricated a polystyrene sulfonate (PSS) stabilized polyethylenimine (PEI) membrane by a facile and scalable spray-coating method. The deposited defect-free selective layer, in which the amine carriers in PEI can be stabilized electrostatically by PSS, exhibited superior CO 2 separation performance with good long-term stability under practical operating conditions. The separation performance was optimized by spray-coating cycles, CNT network loading, and PSS loading. Our membrane showed CO 2 permeance ranging from 820 to 1,770 GPU and CO 2 /N 2 selectivity varying from 395 to 460 under vacuum operation mode in the temperature range between 80 and 90 °C. Furthermore, the membrane was successfully scaled up to 200 cm 2 with good uniformity. These results might suggest a novel membrane structure and a scalable approach for fabrication of highly efficient CO 2 separation membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Finely tuning the microporosity in phosphoric acid doped triptycene-containing polybenzimidazole membranes for highly permselective helium and hydrogen recovery

High-performance polymer membranes with well-defined microporosity and size-sieving ability are especially attractive for helium and hydrogen recovery. Here, in this study, we report novel macromolecular engineering of polybenzimidazole (PBI) membranes that integrate hierarchical triptycene units for high permeability and polyprotic acid doping for size sieving via controllable manipulation of microporous architecture. The triptycene moieties disrupt chain packing and introduce additional configurational free volume, leading to significantly boosted He and H 2 permeabilities compared to previously reported PBI membranes. The acid doping resulted in crosslinked PBI membranes via hydrogen bonding and proton transfer with dramatically enhanced gas selectivities. Via adjusting the H 3 PO 4 -doping level, triptycene-based polybenzimidazole (TPBI) composite membranes (TPBI-(H 3 PO 4 ) x ) exhibit the highest gas selectivities for He enrichment (i.e., α(He/CH 4 ) = 7052 ± 156) and H 2 purification (i.e., α(H 2 /CH 4 ) = 5128 ± 110) among existing polymeric gas separation membranes. Additionally, under mixed-gas conditions at 150 °C, the TPBI-(H 3 PO 4 ) 0.98 membrane displays a H 2 permeability of 46.7 Barrer and a H 2 /CO 2 selectivity of 16, far beyond the Robeson's 2008 upper bound for H 2 /CO 2 separation. The facile and diverse tunability and excellent gas separation performance make TPBI-(H 3 PO 4 ) x membranes highly attractive for helium and hydrogen separation.

42 ENGINEERING↗
DOE OSTI2023

The need for ion-exchange membranes with high charge densities

Ion-exchange membranes (IEMs) are essential for controlling ion transport in electrochemical membrane-based technologies for water purification, energy generation, and energy storage. In general, IEMs must exhibit high ionic conductivity and selectivity, both of which are significantly influenced by the charge and water content of the hydrated membrane. In this perspective, we compiled the charge and water contents of approximately 1,000 IEMs reported over the past several decades to assess their range and variability, as well as to reveal gaps and set clear targets for future membrane design. We compared the charge and water content of negatively and positively charged membranes, as well as membranes developed for desalination and energy applications. The majority of IEMs, regardless of structure or intended application, have volumetric charge densities below 3 mol/L[membrane]. This narrow range of charge densities limits the performance of IEMs and contributes to the observed tradeoff between ion throughput and selectivity. It is critical to develop IEMs with higher charge densities to overcome this performance limitation. Further, we highlighted several design strategies that yielded IEMs with fixed charge densities higher than 3 mol/L[membrane]. These strategies provide valuable insights and can guide the design of next-generation IEMs with high charge densities.

36 MATERIALS SCIENCE↗