Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Linear Solvers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Reduced-Order Aerodynamic Modeling Based on CFD Frequency Responses from Multisine Inputs

A system identification analysis was performed to determine a reduced-order model (ROM) of a computational fluid dynamics (CFD) solver in support of linear aeroservoelastic model development and feedback control design. The approach was applied to the FUN3D code for the half-span wind tunnel test article used in the NASA-Boeing collaboration called the Integrated Adaptive Wing Technology Maturation (IAWTM) project. In a transonic flow condition, multiple inputs (11 structural mode displacements and 3 control surface deflections) were simultaneously excited with orthogonal phase-optimized multisines while multiple outputs (the corresponding 14 generalized aerodynamic forces) were recorded. From these recorded times series, the matrix of frequency responses was computed and subsequently fit using rational function approximations (RFAs). It was found that the entire (14 x 14) matrix of frequency responses could be determined from a single CFD run and that results generally followed trends predicted using other methods. Differences were attributed to the modeling fidelity and nonlinearities from structural mode and control surface interactions at higher reduced frequencies. More accurate fits of the RFAs to the frequency response data were obtained by making two CFD runs, one with only structural mode excitations and one with only control surface excitations, which reduced the degree of nonlinearity in the modeling data.

Aeroservoelasticity↗
NASA NTRSDate not supplied

Progress on Flutter Analysis of the X-56A for the Third Aeroelastic Prediction Workshop

An aeroelastic analysis is presented for the X-56A test case of the upcoming third aeroelastic prediction workshop. Results using the FUN3D linearized frequency-domain solver are shown for four different structural models corresponding to increasing fuel loads. The present study is blind since only redacted and normalized flight test data have been published. However, trends in body-freedom flutter mode frequencies and damping with respect to fuel load are seen to agree well with previously published redacted flight test data.

Steven J Massey↗
DOE OSTI2025

Modeling MTS pyrolysis and SiC deposition kinetics using principal component analysis and neural networks

Accurate chemical kinetics modeling is crucial for improving the efficiency of chemical processing and synthesis of ceramic matrix composites. Detailed kinetic models are computationally expensive due to the large number of transported chemical species, while the simplified physics-based models, such as single-step global mechanisms, are efficient but often overlook key chemical intermediates and pathways. Recent deep learning approaches promise accurate and cost-effective models. Yet, they require additional closures for the transported nonlinear latent variables, complicating integration with existing solvers. In this work, we develop a hybrid linear—nonlinear reduced model for silicon carbide deposition from methyltrichlorosilane precursor by combining principal component analysis (PCA) and autoencoder (AE) neural network (NN) approaches. PCA is used to identify a smaller set of linear transport variables, enabling direct reuse of conventional transport solvers. NNs then reconstruct the full chemical state from these reduced variables. We demonstrate the method on a chemical vapor deposition reactor—comprising a gas-phase pyrolysis plug flow reactor and a heterogeneous surface reactor—over a wide range of temperatures, pressures, and residence times. Our PCA–AE model achieves high accuracy with only five transported scalars, achieving an eightfold cost reduction compared to detailed mechanisms, in both a priori (using data from the test set only) and a posteriori (coupled with a differential equation solver). In conclusion, notable errors arise primarily near training domain boundaries and for long residence times, indicating the need for domain shift indicators and better long-horizon predictions in future reduced chemistry model development.

autoencoder neural networks↗
NASA NTRS1992

Complex generalized minimal residual algorithm for iterative solution of quantum-mechanical reactive scattering equations

Complex dense matrices corresponding to the D + H2 and O + HD reactions were solved using a complex generalized minimal residual (GMRes) algorithm described by Saad and Schultz (1986) and Saad (1990). To provide a test case with a different structure, the H + H2 system was also considered. It is shown that the computational effort for solutions with the GMRes algorithm depends on the dimension of the linear system, the total energy of the scattering problem, and the accuracy criterion. In several cases with dimensions in the range 1110-5632, the GMRes algorithm outperformed the LAPACK direct solver, with speedups for the linear equation solution as large as a factor of 23.

Chatfield, David C.↗
NASA NTRS2000

User's Manual for PCSMS (Parallel Complex Sparse Matrix Solver)

PCSMS (Parallel Complex Sparse Matrix Solver) is a computer code written to make use of the existing real sparse direct solvers to solve complex, sparse matrix linear equations. PCSMS converts complex matrices into real matrices and use real, sparse direct matrix solvers to factor and solve the real matrices. The solution vector is reconverted to complex numbers. Though, this utility is written for Silicon Graphics (SGI) real sparse matrix solution routines, it is general in nature and can be easily modified to work with any real sparse matrix solver. The User's Manual is written to make the user acquainted with the installation and operation of the code. Driver routines are given to aid the users to integrate PCSMS routines in their own codes.

Reddy, C. J.↗
NASA NTRS1990

Fast secant methods for the iterative solution of large nonsymmetric linear systems

A family of secant methods based on general rank-1 updates was revisited in view of the construction of iterative solvers for large non-Hermitian linear systems. As it turns out, both Broyden's good and bad update techniques play a special role, but should be associated with two different line search principles. For Broyden's bad update technique, a minimum residual principle is natural, thus making it theoretically comparable with a series of well known algorithms like GMRES. Broyden's good update technique, however, is shown to be naturally linked with a minimum next correction principle, which asymptotically mimics a minimum error principle. The two minimization principles differ significantly for sufficiently large system dimension. Numerical experiments on discretized partial differential equations of convection diffusion type in 2-D with integral layers give a first impression of the possible power of the derived good Broyden variant.

Deuflhard, Peter↗
DOE OSTI2020

Optimizing the hypre solver for manycore and GPU architectures

The solution of large-scale combustion problems with codes such as Uintah on modern computer architectures requires the use of multithreading and GPUs to achieve performance. Uintah uses a low-Mach number approximation that requires iteratively solving a large system of linear equations. The Hypre iterative solver has solved such systems in a scalable way for Uintah, but the use of OpenMP with Hypre leads to at least slowdown due to OpenMP overheads. The proposed solution uses the MPI Endpoints within Hypre, where each team of threads acts as a different MPI rank. This approach minimizes OpenMP synchronization overhead and performs as fast or (up to 1.44) faster than Hypre's MPI-only version, and allows the rest of Uintah to be optimized using OpenMP. The profiling of the GPU version of Hypre shows the bottleneck to be the launch overhead of thousands of micro-kernels. The GPU performance was improved by fusing these micro-kernels and was further optimized by using Cuda-aware MPI, resulting in an overall speedup of 1.16—1.44 compared to the baseline GPU implementation. The above optimization strategies were published in the International Conference on Computational Science 2020 [1]. This work extends the previously published research by carrying out the second phase of communication-centered optimizations in Hypre to improve its scalability on large-scale supercomputers. Additionally, this includes an efficient non-blocking inter-thread communication scheme, communication-reducing patch assignment, and expression of logical communication parallelism to a new version of the MPICH library that utilizes the underlying network parallelism [2]. The above optimizations avoid communication bottlenecks previously observed during strong scaling and improve performance by up to 2 on 256 nodes of Intel Knight's Landing processor.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Application of linear prolongation to coarse mesh finite difference acceleration in CASMO5

The Coarse-Mesh Finite Difference (CMFD) method has been used for over a decade to accelerate the convergence of the Method of Characteristics (MOC) solution to the two- dimensional particle transport equation in CASMO5. Numerical testing, along with widespread use in production-level calculations, have shown that the current CMFD implementation provides stability and robustness for a wide range of realistic reactor physics problems. However, the recent development of linear prolongation has attracted attention from the community as a way to further improve the performance and stability of CMFD. Two interpolation methods for linear prolongation are presented in this work and implemented into a test version of CASMO5. The performance of the proposed interpolations, referred to as the bilinear and linear directional schemes, is evaluated in terms of runtime relative to the default constant or uniform scaling update. Numerical results indicate that the use of linear prolongation can reduce the transport solver runtime on average by approximately 10% when tested with two hundred randomly selected cases. The new directional linear interpolation, combined with default constant boundary updates, is found to provide the highest reduction in runtime for the cases analyzed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Batched Sparse Linear Algebra (Final Report for Subcontract B648960)

This report finalizes design specifications for developing batched kernels for small tensor operations for unassembled matrix-free iterative solvers, batched solvers for partially assembled operators, and batched solvers with support for various sparse formats. The outcome of the project milestones is a set of interfaces to Batched Sparse LA solvers running on hardware accelerators for use in ECP Libraries and Applications. It is part of the development of sparse batched kernels, solvers/preconditioners as well as creating interoperability in xSDK libraries with sparse and dense batched functions to benefit ECP applications. The participants included representatives from ECP libraries (not limited to the xSDK project), applications, and vendors (AMD, Intel, and NVIDIA). Batched sparse linear algebra solvers form the new frontier for algorithmic development and performance engineering. Many applications (ECP and non-ECP alike) require simultaneous solutions of small linear systems of equations that are structurally sparse. To move towards high hardware utilization, it is important to provide these applications with appropriate interfaces to efficient batched sparse solvers running on modern hardware accelerators. We present interface designs in use by HPC software libraries supporting batched sparse linear algebra and the development of sparse batched kernel codes for solvers and preconditioners. We also address the potential interoperability opportunities to keep the software portable between the major hardware accelerators from AMD, Intel, and NVIDIA. The presented interface specifications includes batched band, sparse iterative, and sparse direct solvers. This report summarizes progress in Kokkos Kernels and the xSDK libraries MAGMA, Ginkgo, hypre, SUNDIALS, and SuperLU_dist.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1993

Preconditioned conjugate-gradient methods for low-speed flow calculations

An investigation is conducted into the viability of using a generalized Conjugate Gradient-like method as an iterative solver to obtain steady-state solutions of very low-speed fluid flow problems. Low-speed flow at Mach 0.1 over a backward-facing step is chosen as a representative test problem. The unsteady form of the two dimensional, compressible Navier-Stokes equations is integrated in time using discrete time-steps. The Navier-Stokes equations are cast in an implicit, upwind finite-volume, flux split formulation. The new iterative solver is used to solve a linear system of equations at each step of the time-integration. Preconditioning techniques are used with the new solver to enhance the stability and convergence rate of the solver and are found to be critical to the overall success of the solver. A study of various preconditioners reveals that a preconditioner based on the Lower-Upper Successive Symmetric Over-Relaxation iterative scheme is more efficient than a preconditioner based on Incomplete L-U factorizations of the iteration matrix. The performance of the new preconditioned solver is compared with a conventional Line Gauss-Seidel Relaxation (LGSR) solver. Overall speed-up factors of 28 (in terms of global time-steps required to converge to a steady-state solution) and 20 (in terms of total CPU time on one processor of a CRAY-YMP) are found in favor of the new preconditioned solver, when compared with the LGSR solver.

Ajmani, Kumud↗
NASA NTRS1993

Preconditioned Conjugate Gradient methods for low speed flow calculations

An investigation is conducted into the viability of using a generalized Conjugate Gradient-like method as an iterative solver to obtain steady-state solutions of very low-speed fluid flow problems. Low-speed flow at Mach 0.1 over a backward-facing step is chosen as a representative test problem. The unsteady form of the two dimensional, compressible Navier-Stokes equations are integrated in time using discrete time-steps. The Navier-Stokes equations are cast in an implicit, upwind finite-volume, flux split formulation. The new iterative solver is used to solve a linear system of equations at each step of the time-integration. Preconditioning techniques are used with the new solver to enhance the stability and the convergence rate of the solver and are found to be critical to the overall success of the solver. A study of various preconditioners reveals that a preconditioner based on the lower-upper (L-U)-successive symmetric over-relaxation iterative scheme is more efficient than a preconditioner based on incomplete L-U factorizations of the iteration matrix. The performance of the new preconditioned solver is compared with a conventional line Gauss-Seidel relaxation (LGSR) solver. Overall speed-up factors of 28 (in terms of global time-steps required to converge to a steady-state solution) and 20 (in terms of total CPU time on one processor of a CRAY-YMP) are found in favor of the new preconditioned solver, when compared with the LGSR solver.

Ajmani, Kumud↗
DOE OSTI2023

Jacobian-free Newton–Krylov method for the simulation of non-thermal plasma discharges with high-order time integration and physics-based preconditioning

A preconditioning framework for the numerical simulation of non-thermal streamer discharges is developed using the Jacobian-free Newton-Krylov (JFNK) method. A reduced plasma fluid model is considered, consisting of electrons, one positive ion, one negative ion, and the electrostatic potential. Here, the plasma kinetics model includes ionization, electron-ion recombination, electron attachment, electron detachment, and ion-ion recombination. The governing equations are made dimensionless, discretized in space with finite differences, and integrated in time with a fully implicit method based on high-order backward differentiation formulas. The preconditioning framework is based on a linearized form of the governing equations and physics-based operator splitting. The efficiency of the preconditioning strategy is assessed through two test cases: streamer propagation between parallel plates and an axisymmetric pin-to-pin discharge. The fully implicit approach overcomes traditional restrictions in the time step size due to processes such as electron drift, electron diffusion, and dielectric relaxation. Excellent performance is observed through relevant statistics of the JFNK solver, although the number of linear iterations increases for the pin-to-pin discharge when nonlinear numerical boundary conditions are imposed at the electrodes. Performance studies show scalability with O(100-1000) processors for O(10M) unknowns with ample room for optimization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Milestone 49 Report: Batched Sparse LA Phase 5 Implementation

Batched sparse linear algebra operations in general, and solvers in particular, have become the major algorithmic development activity and foremost performance engineering effort in the numerical software libraries work on modern hardware with accelerators such as GPUs. Many applications, ECP and non-ECP alike, require simultaneous solutions of many small linear systems of equations that are structurally sparse in one form or another. In order to move towards high hardware utilization levels, it is important to provide these applications with appropriate interface designs to be both functionally efficient and performance portable and give full access to the appropriate batched sparse solvers running on modern hardware accelerators prevalent across DOE supercomputing sites since the inception of ECP. To this end, we present here a summary of recent advances on the interface designs in use by HPC software libraries supporting batched sparse linear algebra and the development of sparse batched kernel codes for solvers and preconditioners. We also address the potential interoperability opportunities to keep the corresponding software portable between the major hardware accelerators from AMD, Intel, and NVIDIA, while maintaining the appropriate disclosure levels conforming to the active NDA agreements. The presented interface specifications include a mix of batched band, sparse iterative, and sparse direct solvers with their accompanying functionality that is already required by the application codes or we anticipated to be needed in the near future. This report summarizes progress in Kokkos Kernels and the xSDK libraries MAGMA, Ginkgo, hypre, PETSc, and SuperLU.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Sparse Approximate Multifrontal Factorization with Butterfly Compression for High-Frequency Wave Equations

In this work, we present a fast and approximate multifrontal solver for large-scale sparse linear systems arising from finite-difference, finite-volume or finite-element discretization of high-frequency wave equations. The proposed solver leverages the butterfly algorithm and its hierarchical matrix extension for compressing and factorizing large frontal matrices via graph-distance guided entry evaluation or randomized matrix-vector multiplication-based schemes. Complexity analysis and numerical experiments demonstrate $\mathcal{O}(N\log^2 N)$ computation and $\mathcal{O}(N)$ memory complexity when applied to an $N\times N$ sparse system arising from 3D high-frequency Helmholtz and Maxwell problems.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1996

Numerical Modeling of Spray Combustion with an Unstructured-Grid Method

The present unstructured-grid method follows strictly the basic finite volume forms of the conservation laws of the governing equations for the entire flow domain. High-order spatially accurate formulation has been employed for the numerical solutions of the Navier-Stokes equations. A two-equation k-epsilon turbulence model is also incorporated in the unstructured-grid solver. The convergence of the resulted linear algebraic equation is accelerated with preconditioned Conjugate Gradient method. A statistical spray combustion model has been incorporated into the present unstructured-grid solver. In this model, spray is represented by discrete particles, rather than by continuous distributions. A finite number of computational particles are used to predict a sample of total population of particles. Particle trajectories are integrated using their momentum and motion equations and particles exchange mass, momentum and energy with the gas within the computational cell in which they are located. The interaction calculations are performed simultaneously and eliminate global iteration for the two-phase momentum exchange. A transient spray flame in a high pressure combustion chamber is predicted and then the solution of liquid-fuel combusting flow with a rotating cup atomizer is presented and compared with the experimental data. The major conclusion of this investigation is that the unstructured-grid method can be employed to study very complicated flow fields of turbulent spray combustion. Grid adaptation can be easily achieved in any flow domain such as droplet evaporation and combustion zone. Future applications of the present model can be found in the full three-dimensional study of flow fields of gas turbine and liquid propulsion engine combustion chambers with multi-injectors.

Shang, H. M.↗
NASA NTRSDate not supplied

Improvements in Iterative Convergence of FUN3D Solutions

This paper presents a hierarchical adaptive nonlinear iteration method (HANIM) implemented in the NASA computational fluid dynamics code, FUN3D, to improve robustness and computational efficiency. In contrast to the legacy FUN3D iterative solver that relies on an approximate Jacobian, a simple multicolor Gauss-Seidel point-implicit iteration scheme, and linear Courant-Friedrichs-Lewy number (CFL) ramping, HANIM is based upon a hierarchy of modules including preconditioner, generalized conjugate residual, realizability check, nonlinear control, and CFL adaption modules. HANIM performance is systematically compared with the performance of the legacy solver of FUN3D and a baseline solver based on a preconditioner alone. Iterative solutions are compared for three benchmark cases: a subsonic separated flow around a hemisphere cylinder, a supersonic flow through a long duct, and a subsonic flow over the NASA wing-fuselage juncture model. Two Reynolds-averaged Navier-Stokes turbulence models are used in these computations, namely, the negative variant of the linear one-equation Spalart-Allmaras model and its nonlinear extension based on quadratic constitutive relations.

CFD↗
DOE OSTI2021

A Scalable Semi-Implicit Barotropic Mode Solver for the MPAS-Ocean

A scalable semi-implicit barotropic mode solver for the ocean component of the model for prediction across scales has been implemented as a competitor to an existing explicit-subcycling scheme to allow faster and more stable simulations while not sacrificing accuracy. The semi-implicit solver adopts the pipelined preconditioned bi-conjugate gradient stabilization algorithm as an iterative solver in conjunction with the restricted additive Schwarz preconditioner that accelerates the convergence rate of the iterative solver. The preconditioner is constructed from a linearized barotropic system that also reorders the system for optimal performance, while the semi-implicit solver deals with the fully nonlinear barotropic system that requires reassembly of the coefficient matrix for every time step. Several numerical experiments, from simple one-dimensional tests to three-dimensional real-world tests, demonstrate that the semi-implicit solver has almost the same accuracy and better parallel scalability compared with the existing scheme while allowing faster and more stable simulations. Furthermore, the semi-implicit solver accelerates the barotropic mode up to 2.9 times faster than the existing scheme on 16,320 processors, leading to an overall runtime speedup of 1.9.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

ELSI — An open infrastructure for electronic structure solvers

Routine applications of electronic structure theory to molecules and periodic systems need to compute the electron density from given Hamiltonian and, in case of non-orthogonal basis sets, overlap matrices. System sizes can range from few to thousands or, in some examples, millions of atoms. Different discretization schemes (basis sets) and different system geometries (finite non-periodic vs. infinite periodic boundary conditions) yield matrices with different structures. The ELectronic Structure Infrastructure (ELSI) project provides an open-source software interface to facilitate the implementation and optimal use of high-performance solver libraries covering cubic scaling eigensolvers, linear scaling density-matrix-based algorithms, and other reduced scaling methods in between. In this paper, we present recent improvements and developments inside ELSI, mainly covering (1) new solvers connected to the interface, (2) matrix layout and communication adapted for parallel calculations of periodic and/or spin-polarized systems, (3) routines for density matrix extrapolation in geometry optimization and molecular dynamics calculations, and (4) general utilities such as parallel matrix I/O and JSON output. The ELSI interface has been integrated into four electronic structure code projects (DFTB+, DGDFT, FHI-aims, SIESTA), allowing us to rigorously benchmark the performance of the solvers on an equal footing. Based on results of a systematic set of large-scale benchmarks performed with Kohn–Sham density-functional theory and density-functional tight-binding theory, we identify factors that strongly affect the efficiency of the solvers, and propose a decision layer that assists with the solver selection process. As a result, we describe a reverse communication interface encoding matrix-free iterative solver strategies that are amenable, e.g., for use with planewave basis sets.

97 MATHEMATICS AND COMPUTING↗