Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIMITING VALUES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Design optimization of semiconductor piezoresistors with Schottky diode contacts

A modeling theory is developed to predict the performance of piezoresistors which incorporate Schottky diode electrical contacts. This new theory allows the design of high performance gauges which can be fabricated using NonLithographically-Based Microfabrication (NLBM) techniques. These semiconductor piezoresistors can be designed in customizable sizes and fabricated in parallel in order to integrate position sensing into MEMS flexural positioners. Customizable nanopositioning platforms will enable advances in a range of nano-scale fabrication and metrology applications. A semiconductor piezoresistor with Schottky diode contacts was fabricated and attached to a titanium flexure. This device is shown to match predicted electrical performance within about 8% and to show a gauge factor of 116, within 2% of the predicted value. Performance limits for Schottky diode semiconductor piezoresistors are identified to be about 127dB full noise dynamic range for a quarter bridge over a 10kHz sensor bandwidth on a 600µm width titanium flexure, making them ideal for sensing on meso-/micro-scale flexural positioners. Methods of reaching these performance bound are suggested and their impact on the sensor dynamic range are studied.

42 ENGINEERING↗
DOE OSTI2023

Novel Structural Motif To Promote Mg-Ion Mobility: Investigating ABO 4 Zircons as Magnesium Intercalation Cathodes

There is an increasing need for sustainable energy storage solutions as fossil fuels are replaced by renewable energy sources. Multivalent batteries, specifically Mg batteries, are one energy storage technology that researchers continue to develop with hopes to surpass the performance of Li-ion batteries. However, the limited energy density and transport properties of Mg cathodes remain critical challenges preventing the realization of high-performance multivalent batteries. In this work, ABO 4 zircon materials (A = Y, Eu and B = V, Cr) are computationally and experimentally evaluated as Mg intercalation cathodes. Remarkably good Mg-ion transport properties were predicted and Mg-ion intercalation was experimentally verified in sol-gel synthesized zircon YVO 4 , EuVO 4 , and EuCrO 4 . Among them, EuVO 4 exhibited the best electrochemical performance and demonstrated repeated reversible cycling. While we believe that the one-dimensional diffusion channels and redox-active species tetragonal coordination limit the value of many zircons as high-performance cathodes, their unique structural motif of overlapping polyhedra along the diffusion pathway appears instrumental for promoting good Mg-ion mobility. The motif results in a favorable "6-5-4" change in coordination that avoids unfavorable sites with lower coordination along the diffusion pathway and a structural design metric for future Mg cathode development.

25 ENERGY STORAGE↗
DOE OSTI2021

Expert elicitation survey predicts 37% to 49% declines in wind energy costs by 2050

Wind energy has experienced accelerated cost reduction over the past five years—far greater than predicted in a 2015 expert elicitation. Here we report results from a new survey on wind costs, compare those with previous results and discuss the accuracy of the earlier predictions. In this work, we show that experts in 2020 expect future onshore and offshore wind costs to decline 37–49% by 2050, resulting in costs 50% lower than predicted in 2015. This is due to cost reductions witnessed over the past five years and expected continued advancements. If realized, these costs might allow wind to play a larger role in energy supply than previously anticipated. Considering both surveys, we also conclude that there is considerable uncertainty about future costs. Our results illustrate the importance of considering cost uncertainty, highlight the value and limits of using experts to reveal those uncertainties, and yield possible lessons for energy modellers and expert elicitation.

17 WIND ENERGY↗
DOE OSTI2026

Quantum kinetic modeling of KEEN waves in a warm-dense regime

We report the first fully kinetic, quantum study of kinetic electrostatic electron nonlinear (KEEN) waves, showing that quantum diffraction systematically erodes the classical trapping mechanism, narrows harmonic locking to the fundamental, and hastens post-drive decay. Electrons are evolved with a second-order Strang-split 1D1V Wigner–Poisson solver that couples conservative semi-Lagrangian WENO advection to an analytic Fourier space update for the non-local Wigner term, while ions remain classical. We focus on collisionless dynamics in a weakly coupled regime, providing a controlled baseline before collisional extensions. Short, frequency-tuned ponderomotive pulses drive KEEN formation in a uniform Maxwellian plasma; as the dimensionless quantum parameter H rises from the classical limit to values relevant to warm-dense matter, doped semiconductors, and 2D electron systems, the drive threshold increases, higher harmonics are damped, trapped electron vortices diffuse, and the subplasma electrostatic energy relaxes to a lower stationary level, as confirmed by continuous wavelet analysis. These microscopic changes carry macroscopic weight. Ignition-scale capsules now compress matter to regimes where the electron de Broglie wavelength rivals the Debye length, making classical kinetic descriptions insufficient. By extending KEEN physics into this quantum domain, our results offer a potential diagnostic of non-equilibrium electron dynamics for next-generation inertial-confinement designs and high-energy-density platforms, indicating that predictive fusion modeling may benefit from the integration of kinetic fidelity with quantum effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Mic-hackathon 2024: hackathon on machine learning for electron and scanning probe microscopy

Microscopy is one of the primary sources of information on materials structure and functionality at the nanometer and atomic scales. The data generated through microscopy is often contained in well-structured datasets, enriched with extensive metadata and sample histories, although not always with the same level of detail or storage format. The broad incorporation of data management plans by major funding agencies ensures the preservation and accessibility of this data. However, deriving insights from these rich datasets remains challenging due to the lack of established code ecosystems, standardized benchmarks, and integration strategies. Correspondingly, the efficiency of data usage is very low, and time expenditures at the analysis stage are enormous. In addition to post-acquisition data analysis, the emergence of application programming interfaces by major microscope manufacturers now creates opportunities for real-time ML-based data analytics to enable automated decision making, and particularly ML-agent controlled real-time microscope operation. Despite these opportunities, there is a significant gap in integrating the ML community with the broader microscopy community, limiting the value that these methods bring to physics and materials discovery and materials optimization. Hackathons address these challenges by fostering collaboration between ML experts and microscopy professionals, encouraging the development of innovative solutions that leverage ML for microscopy and preparing the workforce of the future both for microscopy-intensive domains areas, instrument manufacturers, and ML scientists interested in real world applications for fundamental research, materials optimization, and manufacturing. The hackathon generated benchmark datasets and digital twins of microscopes that further contribute to the development of the field and establish data analysis ecosystems. All the codes can be found at GitHub(https://github.com/KalininGroup/Mic-hackathon-2024-codes-publication/tree/1.0.0.1) and Zenodo (https://zenodo.org/records/15579940).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Determination of Seven Organic Impurities in FD&C Yellow No. 6 by Ultra-High-Performance Liquid Chromatography

The U.S. Food and Drug Administration (FDA) batch certifies FD&C Yellow No. 6 (Y6) to ensure that the color additive meets requirements published in the Code of Federal Regulations (CFR), including specifications for seven organic manufacturing impurities consisting of two intermediates, a reaction by-product, an impurity originating from an intermediate, and three subsidiary colors. An ultra-high-performance liquid chromatography (UHPLC) method was developed and validated for determining seven organic impurities in Y6. For comparison, the currently used high-performance liquid chromatography (HPLC) method was also validated. The new UHPLC method uses a 1.7 µm particle size biphenyl column with aqueous ammonium formate and methanol as eluants. Analytes are identified by comparing their retention times and UV-visible spectra to those of reference standards. Calibration is performed in the presence of the dye matrix and analyte levels are determined from their peak areas. UHPLC and HPLC validation studies obtained linear calibration curves and excellent values for limits of detection, limits of quantitation, recovery, repeatability, and intermediate precision for all analytes. Survey analyses of 30 samples using the UHPLC and HPLC methods yielded results that were consistent within experimental error; however, the UHPLC method provided more accurate results for two analytes that coelute using the HPLC method. The UHPLC method satisfies the accuracy and precision requisites for routine certification of Y6. The UHPLC method is faster and generates less waste than the HPLC method while delivering better sensitivity, separation, and accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Accurate and complete genomes from metagenomes

Genomes are an integral component of the biological information about an organism; thus, the more complete the genome, the more informative it is. Historically, bacterial and archaeal genomes were reconstructed from pure (monoclonal) cultures, and the first reported sequences were manually curated to completion. However, the bottleneck imposed by the requirement for isolates precluded genomic insights for the vast majority of microbial life. Shotgun sequencing of microbial communities, referred to initially as community genomics and subsequently as genome-resolved metagenomics, can circumvent this limitation by obtaining metagenome-assembled genomes (MAGs); but gaps, local assembly errors, chimeras, and contamination by fragments from other genomes limit the value of these genomes. Here, we discuss genome curation to improve and, in some cases, achieve complete (circularized, no gaps) MAGs (CMAGs). To date, few CMAGs have been generated, although notably some are from very complex systems such as soil and sediment. Through analysis of about 7000 published complete bacterial isolate genomes, we verify the value of cumulative GC skew in combination with other metrics to establish bacterial genome sequence accuracy. The analysis of cumulative GC skew identified potential misassemblies in some reference genomes of isolated bacteria and the repeat sequences that likely gave rise to them. We discuss methods that could be implemented in bioinformatic approaches for curation to ensure that metabolic and evolutionary analyses can be based on very high-quality genomes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

15.3% AM1.5G Efficiency GaAs Solar Cells Fabricated via an Epitaxy-Free Process

Here, we report simple and potentially low-cost techniques for creating high-quality n-type gallium arsenide (GaAs) and GaAs p/n junctions and fabricate GaAs p/n junction solar cells. Detailed-balance modeling suggests that 20% AM1.5G efficiency p/n homojunction devices may be possible if the surface doping concentration can be limited to values less than ∼ 5 × 10 19 cm −3 . Our process exploits an open-tube, vapor-phase, deposition-free, zinc diffusion technique for forming p-type layers in melt-grown n-GaAs substrates that results in sheet resistances less than 1 kΩ/$\square$. In addition, we have improved the minority carrier diffusion lengths of melt-grown GaAs from less than one micron to over five microns using an open-tube, vacuum-free, annealing process which reduces the density of EL2 midgap defects. Finally, we have combined these advances to fabricate epitaxy-free, GaAs solar cells with a validated AM1.5G efficiency of 15.3%.

14 SOLAR ENERGY↗
DOE OSTI2025

Reestablishing larval connectivity in an estuarine landscape: the importance of shoreline and subtidal oysters ( Crassostrea virginica ) in a comprehensive oyster restoration program

The decline of oyster reefs in estuaries has resulted from a combination of chronic and acute disturbances. The loss has resulted in decreased yield for the oyster fishery as well as a decline in ecological benefits that has led to increased efforts to restore oyster reefs. The need for scientific guidance in accomplishing these restoration goals has become even more pressing in the northcentral Gulf of Mexico in the wake of injury to oyster reefs resulting from the Deepwater Horizon oil spill. Restoration of both the shallow, marsh-fringing oyster aggregations and the deeper subtidal oyster reefs is necessary. Historically, fringing oysters have been overlooked in the oyster habitat landscape because of their limited commercial value. Here, we use a biophysical transport model to examine the transport and settlement of oyster larvae in known oyster reefs along the coast of the northcentral Gulf of Mexico. The modeling demonstrated that the majority of oyster larvae settle within the embayment (>98%) or sub-basin (>65%) of their origin. Additionally, the model demonstrated the importance of fringing oysters as a source of larvae to re-seed other fringing oysters along marsh edges as well as subtidal oyster reefs. We conclude that networks of reefs, including both fringing oyster habitat and subtidal oyster reefs within sub-basins, are necessary to provide resilience to the population at the sub-basin level. Finally, we conclude that fringing oyster habitat may serve as an archipelago-like network to enhance larval supply and connectivity for oysters throughout the mesosaline portions of estuaries.

ADCIRC↗
DOE OSTI2022

Monolithic Multigrid for a Reduced-Quadrature Discretization of Poroelasticity

Advanced finite-element discretizations and preconditioners for models of poroelasticity have attracted significant attention in recent years. The equations of poroelasticity offer significant challenges in both areas, due to the potentially strong coupling between unknowns in the system, saddle-point structure, and the need to account for wide ranges of parameter values, including limiting behavior such as incompressible elasticity. This paper was motivated by an attempt to develop monolithic multigrid preconditioners for the discretization developed in [C. Rodrigo et al., Comput. Methods App. Mech. Engrg, 341 (2018), pp. 467--484]; we show here why this is a difficult task and, as a result, we modify the discretization in [Rodrigo et al.] through the use of a reduced-quadrature approximation, yielding a more “solver-friendly” discretization. Local Fourier analysis is used to optimize parameters in the resulting monolithic multigrid method, allowing a fair comparison between the performance and costs of methods based on Vanka and Braess--Sarazin relaxation. Further, numerical results are presented to validate the local Fourier analysis predictions and demonstrate efficiency of the algorithms. Finally, a comparison to existing block-factorization preconditioners is also given.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

On the Verification of Deep Reinforcement Learning Solution for Intelligent Operation of Distribution Grids

Capabilities of deep reinforcement learning (DRL) in obtaining fast decision policies in high dimensional and stochastic environments have led to its extensive use in operational research, including the operation of distribution grids with high penetration of distributed energy resources (DER). However, the feasibility and robustness of DRL solutions are not guaranteed for the system operator, and hence, those solutions may be of limited practical value. This paper proposes an analytical method to find feasibility ellipsoids that represent the range of multi-dimensional system states in which the DRL solution is guaranteed to be feasible. Empirical studies and stochastic sampling determine the ratio of the discovered to the actual feasible space as a function of the sample size. In addition, the performance of logarithmic, linear, and exponential penalization of infeasibility during the DRL training are studied and compared in order to reduce the number of infeasible solutions

Hosseini, Mohammad Mehdi↗
DOE OSTI2020

Two Views of the Radius Gap and the Role of Light Curve Fitting

Recently, several groups have resolved a gap that bifurcates planets between the size of Earth and Neptune into two populations. The location and depth of this feature is an important signature of the physical processes that form and sculpt planets. In particular, planets residing in the radius gap are valuable probes of these processes as they may be undergoing the final stages of envelope loss. Here, we discuss two views of the radius gap by Fulton & Petigura (F18) and Van Eylen et al. (V18). In V18, the gap is wider and more devoid of planets. This is due, in part, to V18's more precise measurements of planet radius R{sub p}. Thanks to Gaia, uncertainties in stellar radii R{sub ⋆} are no longer the limiting uncertainties in determining R{sub p} for the majority of Kepler planets; instead, errors in R{sub p}/R{sub ⋆} dominate. V18's analysis incorporated short-cadence photometry along with constraints on mean stellar density that enabled more accurate determinations of R{sub p}/R{sub ⋆}. In the F18 analysis, less accurate R{sub p}/R{sub ⋆} blurs the boundary the radius gap. The differences in R{sub p}/R{sub ⋆} are largest at high impact parameter (b≳0.8) and often exceed 10%. This motivates excluding high-b planets from demographic studies, but identifying such planets from long-cadence photometry alone is challenging. We show that transit duration can serve as an effective proxy, and we leverage this information to enhance the contrast between the super-Earth and sub-Neptune populations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

The First Identification of Lyα Changing-look Quasars at High Redshift in DESI

We present two cases of Lyα changing-look (CL) quasars (J1306 and J1512) along with two additional candidates (J1511 and J1602), all discovered serendipitously at z > 2 through the Dark Energy Spectroscopic Instrument and the Sloan Digital Sky Survey. It is the first time to capture CL events in Lyα at high redshift, which is crucial for understanding the underlying mechanisms driving the CL phenomenon and the evolution of high-redshift quasars and galaxies. We find that the accretion rate in the dim state for these CL objects corresponds to a relatively low value ($\mathop{\,}\limits^{{\mathscr{M}}}\,\approx 2\times 1{0}^{-3}$), which suggests that the inner region of the accretion disk might be in transition between the advection dominated accretion flow ($\dot{\,{\mathscr{M}}}\,\lt 1{0}^{-3}\sim 1{0}^{-2}$) and the canonical accretion disk (optically thick, geometrically thin). However, unlike in C IV CL quasars in which broad Lyα remained, the broad C IV may still persist after a CL event occurs in Lyα, making the physical origin of the CL and ionization mechanism event more puzzling and interesting.

accretion↗
DOE OSTI2025

Brief communication: Decadal changes in topography, surface water and subsurface structure across an Arctic coastal tundra site

Abstract. In ice-rich polygonal tundra, spatiotemporal heterogeneity in ground-ice melt reshapes topography, impacting infrastructure, water and carbon cycles. This study evaluates changes in topography and subsurface structure at a coastal Arctic site by comparing data from two surveys conducted a decade apart. Each survey includes electrical resistivity tomography, active layer thickness, photogrammetry, and topographic data. Results reveal subsidence and decrease in permafrost table elevation with varying intensity and spatial distribution across polygons, alongside diverse thermal-hydrological responses, such as thermokarst pool formation in high-centered-polygons and more even subsidence in flat-centered-polygons. The study also underscores the value and limitations of sporadic surveys.

Bachman, Jonathan A↗
DOE OSTI2026

Gaps in PV-Coupled Battery Modeling

With the rapid increase in battery attachment rates for PV systems and the continued qualification of storage for the ITC under OBBB, accurately characterizing PV-coupled batteries is becoming increasingly critical for the PV industry. This presentation will explore the key gaps in current best practices for modeling PV-coupled battery storage, including challenges such as battery thermal conditioning, the influence of dispatch strategies on battery value, the limitations of oversimplified degradation and performance models, and the absence of a centralized database containing sufficient battery parameters for accurate modeling. For behind-the-meter applications, we will also address issues like mismatched solar resource and load profiles, as well as uncertainties in future utility rates. Where applicable, we will quantify the impacts of these gaps on the accuracy and uncertainty of modeling efforts and highlight ongoing research aimed at addressing these challenges.

14 SOLAR ENERGY↗
NASA NTRS1966

Modified hydraulic braking system limits angular deceleration to safe values

Conventional spring actuated, hydraulically released, fail-safe disk braking system is modified to control the angular deceleration of a massive antenna. The hydraulic system provides an immediate preset pressure to the spring-loaded brake shoes and holds it at this value to decelerate the antenna at the desired rate.

Briggs, R. S.↗
NASA NTRS1972

Influence of oxygen-vacancy complex /A center/ on piezoresistance of n-type silicon.

Changes in both magnitude and temperature dependence of the piezoresistance of electron-irradiated n-type silicon, induced by the latter's oxygen-vacancy complex (A center), are shown to be due to the fact that the presence of the A center causes the total conduction-band electron concentration to change with an applied stress. This change in electron concentration leads to an additional piezoresistance contribution that is expected to be important in certain many-valley semiconductors. This offers the possibility of tailoring the thermal variations of semiconductor mechanical sensors to more desirable values over limited temperature ranges.

Littlejohn, M. A.↗