Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Corium lavas: structure and properties of molten UO 2 -ZrO 2 under meltdown conditions

In the exceedingly rare event of nuclear reactor core meltdown, uranium dioxide fuel reacts with Zircaloy cladding to produce eutectic melts which can subsequently be oxidized by coolant/moderator water. Oxidized corium liquids in the xUO 2 ·(100 – x)ZrO 2 system were produced via laser melting of UO 2 -ZrO 2 mixtures to temperatures in excess of 3000 K. Contamination was avoided by floating the droplets on a gas stream within an aerodynamic levitator and in-situ high-energy x-ray diffraction experiments allowed structural details to be elucidated. Molecular dynamics simulations well reproduced diffraction and density data, and show less compositional variation in thermal expansion and viscosity than suggested by existing measurements. As such, corium liquids maintain their highly penetrating nature irrespective of the amount of oxidized cladding dissolved in the molten fuel. Metal-oxygen coordination numbers vary with both composition and temperature. The former is due to mismatch in native values, n UO (x = 100) ≈ 7 and n ZrO (x = 0) ≈ 6, and the requirement for oxygen site stabilization. Furthermore, the latter provides a thermal expansion mechanism.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Curie-Weiss behavior of liquid structure and ideal glass state

We present the results of a structural study of metallic alloy liquids from high temperature through the glass transition. We use high energy X-ray scattering and electro-static levitation in combination with molecular dynamics simulation and show that the height of the first peak of the structure function, S(Q) -1, follows the Curie-Weiss law. The structural coherence length is proportional to the height of the first peak, and we suggest that its increase with cooling may be related to the rapid increase in viscosity. The Curie temperature is negative, implying an analogy with spin-glass. The Curie-Weiss behavior provides a pathway to an ideal glass state, a state with long-range correlation without lattice periodicity, which is characterized by highly diverse local structures, reminiscent of spin-glass.

36 MATERIALS SCIENCE↗

Phase separation in mullite-composition glass

Aluminosilicates (AS) are ubiquitous in ceramics, geology, and planetary science, and their glassy forms underpin vital technologies used in displays, waveguides, and lasers. In spite of this, the nonequilibrium behavior of the prototypical AS compound, mullite (40SiO 2 -60Al 2 O 3 , or AS60), is not well understood. By deeply supercooling mullite-composition liquid via aerodynamic levitation, we observe metastable liquid–liquid unmixing that yields a transparent two-phase glass, comprising a nanoscale mixture of AS7 and AS62. Extrapolations from X-ray scattering measurements show the AS7 phase is similar to vitreous SiO 2 with a few Al species substituted for Si. The AS62 phase is built from a highly polymerized network of 4-, 5-, and 6-coordinated AlO x polyhedra. Polymerization of the AS62 network and the composite morphology provide essential mechanisms for toughening the glass.

36 MATERIALS SCIENCE↗

Low-Dimensional Network Formation in Molten Sodium Carbonate

Molten carbonates are highly inviscid liquids characterized by low melting points and high solubility of rare earth elements and volatile molecules. An understanding of the structure and related properties of these intriguing liquids has been limited to date. We report the results of a study of molten sodium carbonate (Na2CO3) which combines high energy X-ray diffraction, containerless techniques and computer simulation to provide insight into the liquid structure. Total structure factors (F-x(Q)) are collected on the laser-heated carbonate spheres suspended in flowing gases of varying composition in an aerodynamic levitation furnace. The respective partial structure factor contributions to Fx(Q) are obtained by performing molecular dynamics simulations treating the carbonate anions as flexible entities. The carbonate liquid structure is found to be heavily temperature-dependent. At low temperatures a low-dimensional carbonate chain network forms, at T = 1100 K for example similar to 55% of the C atoms form part of a chain. The mean chain lengths decrease as temperature is increased and as the chains become shorter the rotation of the carbonate anions becomes more rapid enhancing the diffusion of Na+ ions.

Wilding, Martin C.↗

Role of Ti in the formation of Zr-Ti-Cu-Ni-Al glasses

It has been widely reported that glass formation improves in Zr{sub 62}Cu{sub 20}Ni{sub 8}Al{sub 10} alloys when small amounts of Ti are substituted for Zr. Glasses containing greater than 3 at. % Ti crystallize to a metastable icosahedral phase, suggesting that Ti enhances icosahedral short-range order in the liquid/glass, making crystallization more difficult during cooling. However, based on containerless solidification and in situ high-energy synchrotron diffraction studies of electrostatically levitated supercooled liquids of these alloys, we demonstrate that Ti inhibits surface crystallization but neither increases the icosahedral short-range order nor improves glass formation.

43 PARTICLE ACCELERATORS↗

Dusty Plasma Technology of DCM with Nanostructure Surface Layer Production

The technique of disperse composite material (DCM) production was developed. The technique based on using special dusty plasma trap in RF plasma, in which fine particles levitate and are exposed by the atomic beam. The two types of covering were obtained: ''cauliflower'' or smooth, depending on process condition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Micro-Particles As Thermal Probes In Plasmas

Temperature sensitive 'thermographic' phosphors are utilized for measuring the temperature of micro-particles levitated in a plasma.The equilibrium temperature of particles T{sub p} in a plasma is determined by the sum of the energy fluxes between their surface and the surrounding plasma. By variation of gas composition and plasma parameters the different contributions to the total energy flux can be influenced. By measurement of the temperature of the microscopic probe particles, valuable information about the physics of plasma-particle interaction can be obtained. This is particularly of interest for dusty plasma research and the improvement of technical plasmas.Preliminary measurements of T{sub p} in the plasma-reactor PULVA-INP are presented, which show quite promising results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A kinetic model to study film deposition during dusty plasma chemical vapor deposition process

A simplistic numerical kinetic model to predict the deposited film morphology in dusty plasma chemical vapor deposition reactors is developed. The morphological accretion of a circular object is studied in a two-dimensional geometry and the most important deposition phenomena are taken into account, i.e., surface diffusion and surface ion bombardment. Both isotropic and anisotropic plasmas are considered. It is shown that when the particle is located in an isotropic plasma, the deposited film maintains the original particle sphericity. Whereas, if the particle is assumed to levitate in the (pre) sheath forming around the bottom electrode of the reactor and ions contribute considerably to the deposition, the film develops in a nonuniform manner similar to experimental observations.

36 MATERIALS SCIENCE↗

Measurements of electric charge and screening length of microparticles in a plasma sheath

An experiment is described in which microparticles are levitated within a rf sheath above a conducting plate in argon plasma. The microparticles forming a two-dimensional crystal structure are considered to possess Debye screening Coulomb potential {phi}(r)=(Q/4{pi}{epsilon}{sub 0}r)exp(-r/{lambda}), where Q is the electric charge, r is distance, and {lambda} is the screening length. When the crystal structure is slanted with an angle {theta}, a particle experiences a force Mg sin {theta}, where M is the mass of the particle and g is acceleration due to gravity, which must be equal to the Debye screened Coulomb force from other particles. By changing {theta}, relations for {lambda}(Q) are measured. The screening length {lambda} and Q are determined uniquely from the crossing points of several relations. The electric charge Q is also estimated from a floating potential measured with a probe. The measured {lambda} is nearly equal to an ion Debye length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of two-dimensional dust vortex flows in a direct current discharge plasma

The two-dimensional dust vortex flows are observed in a direct current discharge plasma near the edge of a metal plate which is situated in the dust-particle levitation region. Applying negative dc potential to the metal plate, dust particles are strongly accelerated toward the metal plate edge, and two symmetric dust vortex flows are generated on both sides of the metal plate. Numerical calculation including the effect of the ion drag force well demonstrates the dust vortex formation as in the experiment. A mechanism of the dust vortex generation could be explained by effect of an asymmetry of ion drag force near the metal plate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Glass formation and structure in the MgSiO{sub 3}-Mg{sub 2}SiO{sub 4} pseudobinary system: From degraded networks to ioniclike glasses

A series of glasses xMgO-(1-x)SiO{sub 2} with compositions from enstatite MgSiO{sub 3} (x=0.5) to forsterite Mg{sub 2}SiO{sub 4} (x=0.667) in mole fraction intervals of x{approx_equal}0.02 have been prepared by containerless levitation techniques and CO{sub 2} laser heating. Polarized and depolarized Raman spectra measured at ambient conditions for all these glasses show systematic and smooth band intensity changes with composition. Analysis of the Raman band contours in terms of vibrations due to different oxygen bridged SiO{sub 4} tetrahedra (Q{sup i}, species analysis) undoubtedly shows that bridging oxygens are present in all glasses studied even in the limit of the forsterite composition where bridged Si{sub 2}O{sub 7}{sup 6-} ionic dimers are formed. Furthermore the relative amounts of the Q{sup i} species change smoothly with composition while at high MgO content 'free' oxygens are present presumably forming Mg-O-Mg bridges, which contribute to the glass stability at these compositions. Raman spectra measurements at different temperature below T{sub g} show small alterations in the Q{sup i} species in the MgSiO{sub 3} region while no changes were observed in the Mg{sub 2}SiO{sub 4} region. The Boson peak frequency is practically invariant on both composition and temperature and this is in contrast to the systematics followed by most silicate glasses. It is suggested that at compositions near the forsterite ioniclike glasses are formed arising from a very fragile liquid.

36 MATERIALS SCIENCE↗

Effect of high-voltage nanosecond pulses on complex plasmas

Influence of high-voltage (1-11 kV) pulses of nanosecond (20 ns) duration on microparticles levitating in a rf plasma is studied. It is shown that the pulses produce significant influence on the plasma, causing perturbations with the relaxation time of the order of 10{sup -4} s. This time is sufficient for the microparticle to acquire significant kinetic energy. Application of repetitive pulses leads to the vertical oscillations of the microparticles. Clusters, consisting of small number of microparticles, exhibit parametric instabilities of horizontal modes under the effect of repetitive pulses. It was shown that the parametric instability is caused by the vertical oscillations of the microparticles in the nonuniform environment of the sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Traveling electric field probed by a fine particle above voltage-modulated strips in a striped electrode device

It is described that the distribution of the horizontal electric field above a striped electrode can be inferred from the trajectory of a single fine particle with known mass and diameter. The striped electrode consists of 100 segmented stainless steel strips, each electrically insulated. A traveling periodic potential profile is produced above the striped electrode by modulating the voltage signals on the strips. When the voltage modulation is on, the fine particle, which is originally levitated in the sheath region above the striped electrode, experiences a periodic oscillation along both the vertical and the horizontal directions because of the periodic electric force arising from the modulation voltages. Tracking the motion of the fine particles, the electric force is obtained from the momentum equation including the gravity and the neutral gas friction. With the particle charge estimated by the vertical oscillation method, the electric field can be derived. The horizontal electric field obtained by this method is in agreement with the result predicted by a collisional particle-in-cell simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Core level photoionization on free sub-10-nm nanoparticles using synchrotron radiation

A novel instrument is presented, which permits studies on singly charged free nanoparticles in the diameter range from 1 to 30 nm using synchrotron radiation in the soft x-ray regime. It consists of a high pressure nanoparticle source, a high efficiency nanoparticle beam inlet, and an electron time-of-flight spectrometer suitable for probing surface and bulk properties of free, levitated nanoparticles. We show results from x-ray photoelectron spectroscopy study near the Si L{sub 3,2}-edge on 8.2 nm SiO{sub 2} particles prepared in a nanoparticle beam. The possible use of this apparatus regarding chemical reactions on the surface of nanometer-sized particles is highlighted. This approach has the potential to be exploited for process studies on heterogeneous atmospheric chemistry.

36 MATERIALS SCIENCE↗

Experiments with an rf dusty plasma and an external plasma jet

A plasma jet produced in a coaxial plasma gun was aimed at a cloud of dust particles levitated in the sheath of a radio-frequency (rf) plasma produced between two parallel-plate electrodes. A high-speed camera with a side-view on the dust cloud was used to track the dust particles. Several cases of dust motion could be observed. When the jet was parallel with the horizontal electrodes of the rf plasma the dust particles were either pushed out of the trapping region by the plasma jet or were only perturbed from their equilibrium position, oscillating with a frequency of the order of a few kHz. In the first case the trajectory of the dust particles followed the curvature of the sheath. In the second case, when the jet was fired at a small angle with the horizontal electrodes the dust particles hit the bottom electrode and ricocheted back into the sheath. Finally, another situation was observed when the jet perturbed the rf plasma and its sheath and the whole dust crystal fell to the electrode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of electron density in complex plasmas of the PK-3 plus apparatus on the International Space Station

Dust particles in discharge are often levitated in a sheath region rather than in bulk plasma under gravitational conditions (on Earth). Gravity compresses dust clouds, and the gravitational force restricts the motion of the dust particles. Microgravity gives the plasmas, including dust particles, so-called complex (dusty) plasmas, where dust particles are embedded in a completely charge-neutral region of the bulk plasma. The dust cloud, as an uncompressed strongly-coupled Coulomb system, corresponds to an atomic model with physical phenomena, e.g., crystallization, phase transition, and so on. Since the phenomena are tightly connected to plasma states expressed by plasma parameters, it is significant to estimate the plasma parameters, such as electron density and temperature. The present work shows the electron density measured by the frequency shift probe in the apparatus for microgravity experiments currently boarding on the International Space Station (PK-3 plus). The frequency shift probe measurement gave electron density in the order of 10{sup 8} cm{sup -3} as a typical value in the apparatus, and demonstrated the detection of electrons in plasmas with dust particles. The spatial distribution profile of the electron density obtained in this measurement presents an aspect for the void formation of dust clouds under microgravity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High energy x-ray scattering studies of the local order in liquid Al

The x-ray structure factors and densities for liquid aluminum from 1123 K to 1273 K have been measured using the beamline electrostatic levitator. Atomic structures as a function of temperature have been constructed from the diffraction data with reverse Monte Carlo simulations. An analysis of the local atomic structures in terms of the Honeycutt-Andersen indices indicates a high degree of icosahedral and distorted icosahedral order, a modest amount of body-centered cubic order, and marginal amounts of face-centered cubic and hexagonal close-packed order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗