Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Irradiation defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

The observation of damage regions produced by neutron irradiation in lithium-doped silicon solar cells.

Study regions of lattice disorder produced in lithium-doped float-zone melted n/p-type silicon solar cells by irradiation with monoenergetic neutrons at doses between 10 to the 10th and 10 to the 13th per cu cm. The defect regions were revealed by chemically etching the surface of the solar cells and by observing carbon replicas in an electron microscope. It was found that the defect density increased with increasing irradiation dose and increased lithium content, whereas the average defect diameter was found to decrease. From thermal annealing experiments it was found that in the lithium-doped material the defect structure was stable at temperatures between 300 and 1200 K. This was found to be in contrast to the undoped material where at the lowest doses considerable annealing was observed to occur. These results are discussed in terms of the theoretical predictions and models of defect clusters proposed by Gossick (1959) and Crawford and Cleland (1959).

Ghosh, S.↗
NASA NTRS1994

Performance, defect behavior and carrier enhancement in low energy, proton irradiated p+nn+ InP solar cells

The highest AMO efficiency (19.1 percent) InP solar cell consisted of an n+pp+ structure epitaxially grown on a p+ InP substrate. However, the high cost and relative fragility of InP served as motivation for research efforts directed at heteroepitaxial growth of InP on more viable substrates. The highest AMO efficiency (13.7 percent) for this type of cell was achieved using a GaAs substrate. Considering only cost and fracture toughness, Si would be the preferred substrate. The fact that Si is a donor in InP introduces complexities which are necessary in order to avoid the formation of an efficiency limiting counterdiode. One method used to overcome this problem lies in employing an n+p+ tunnel junction in contact with the cell's p region. A simpler method consists of using an n+ substrate and processing the cell in the p+ nn+ configuration. This eliminates the need for a tunnel junction. Unfortunately, the p/n configuration has received relatively little attention the best cell with this geometry having achieved an efficiency of 17 percent. Irradiation of these homoepitaxial cells, with 1 Mev electrons, showed that they were slightly more radiation resistant than diffused junction n/p cells. Additional p/n InP cells have been processed by some activity aimed at diffusion. Currently, there has been some activity aimed at producing heteroepitaxial p+nn+ InP cells using n+ Ge substrates. Since, like Si, Ge is an n-dopant in InP, use of this configuration obviates the need for a tunnel junction. Obviously, before attempting to process heteroepitaxial cells, one must produce a reasonably good homoepitaxial cell. In the present case we focus our attention on homoepitaxially on an n+ Ge substrate.

Weinberg, I.↗
DOE OSTI2023

Design and development of equi-atomic refractory High Entropy Alloys for use in radiation environments

Development of new structural materials that can withstand the extreme environments of nuclear reactors where the materials are exposed to high dose rate of ~ 30 200 dpa, high temperatures of the order of 500 1000 o C and tens of years of operation is vital for exploiting the “smallest carbon footprint energy source” to its fullest, in order to deal with the energy crisis worldwide. Recently, HEAs have shown superior irradiation properties over conventional alloys like higher resistance to defect formation, lower void swelling, limited irradiation hardening and higher microstructural stability under irradiation, making them potential structural material candidates for reactors. Proper characterization and testing of these materials are essential before they can replace the conventional alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Measurements of displacement cross sections of metals for 120-GeV proton beam irradiation

The number of displacements per atom (dpa) is widely used as an indicator of irradiation damage of materials in proton accelerator facilities. Experiments have been carried out to validate the dpa of metallic materials for protons with energies below 3 GeV. However, measurements of the displacement cross-sections for high-energy protons above 3 GeV have not been carried out and the calculations have not been validated. To validate the displacement cross section of metals in high-energy region, electrical resistivity changes in wires of aluminum, copper and tungsten at 8 K were measured using protons with energies of 120-GeV. The results show that the Norgett-Robinson-Torrens dpa model of the Particle and Heavy Ion Transport Calculation Code overestimates the experimental data. On the other hand, the calculated results using the athermal recombination corrected dpa model were in agreement with the measured displacement cross sections. In the proton energy region above 1 GeV, the displacement cross section is almost constant, which is due to the fact that the damage energy of the material under 1 GeV proton irradiation is almost the same as under 120 GeV proton irradiation. Damage recovery of defects accumulated in the sample was also measured using isochronal annealing: At 80 K, approximately 60 % and 80 % of the damage remains for copper and tungsten, respectively. These results are the same as those obtained from other experiments on proton and neutron irradiation.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

UV-Enabled Defect Engineering in Multilayer GaSe and InSe and UV Writing of the Grating Pattern

III–VI post-transition-metal chalcogenides are layered semiconductor materials that exhibit direct band gaps in multilayers. Defect engineering is essential in 2D layered semiconductors for functional devices. Here, in this work, we report defect engineering in multilayer gallium selenide (GaSe) and indium selenide (InSe), where defects generated by ultraviolet (UV, 325 nm) laser irradiation result in an additional photoluminescence (PL) line. The additional PL line is due to defect-bound excitons. Characteristics of the defect emission are similar in GaSe and InSe samples subjected to UV irradiation, air annealing, and hydrostatic pressure. Two-beam UV interference was applied to create grating patterns with a periodic array of low and high densities of defects in GaSe. Density functional theory has identified the defect type in GaSe. The results provide valuable insights into defect generation and UV scribing of photonic circuits in 2D Se-based multilayers for optical integration in a 2D platform.

2D multilayered materials↗
DOE OSTI2022

Role of chemical disorder on radiation-induced defect production and damage evolution in NiFeCoCr

Understanding chemical disorder in many concentrated solid solution alloys (CSAs) at the levels of electrons and atoms has attracted increasing attention as a path forward to reveal and identify underlying mechanisms for extraordinary mechanical properties and improved radiation tolerance. Single-phase NiFeCoCr CSA is a common base for many high-entropy alloys (HEAs) that have shown improved mechanical strength and radiation tolerance. In this study, defect production and damage evolution in NiFeCoCr under ion irradiation at room temperature to dose over 20 dpa are determined using ion channeling technique along both <100> and <110> directions utilizing multiple probing beam energies. The results obtained from the multi-axial and multi-energy channeling analysis are compared with those previously obtained for Ni crystals irradiated under similar conditions. The influence of chemical complexity on defect production and clustering at early-stage under room temperature irradiation up to dose of 1 dpa is discussed based on positron annihilation spectroscopy results. Defect structure evaluation in Ni and NiFeCoCr is also discussed based on transmission electron microscopy results over a prolonged irradiation at both room and elevated temperatures. Compared with chemically complex NiFeCoCr, larger dislocation loops thus less lattice strain are expected to form in pure Ni. Moreover, the role of chemical disorder in this CSA is also investigated based on ab initio calculations using large supercells. Finally, to understand the impact of chemical complexity effect on defect structure evolution, this integrated research effort attempts to link the relatively large charge redistribution due to difference in valence electron counts resulting from alloying different 3d transition metal elements, moderate lattice distortion arising from similar adaptable atomic size, and notable suppressed or delayed damage evolution in NiFeCoCr.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Small uranium and oxygen interstitial clusters in UO 2 : An empirical potential study

The aggregation of defect clusters in UO 2 under irradiations creates dislocation loops and cavities, which in turn contribute to swelling of the fuels, leading to detrimental pellet-clad mechanical interactions. The kinetics of the defect clusters, however, have received less attention and are not well understood. As such, using two interatomic potentials, the Morelon potential and a many-body model by Cooper, Rushton, and Grimes (CRG), the energetics and kinetics of small uranium interstitial clusters, with and without bound oxygen interstitials, are investigated with molecular dynamics and accelerated molecular dynamics simulations. For the single bound anti-Schottky interstitial cluster (U i 2O i ), both potentials find the interstitialcy migration mechanism to be a low barrier migration mechanism. However, for the CRG potential, an oxygen Frenkel pair assisted interstitial cluster migration mechanism with a lower migration barrier is identified during accelerated molecular dynamics simulations. For the Morelon potential, the interstitial clusters have geometrically compact structures, and small interstitial clusters (two and three anti-Schottky clusters) are more mobile than the single bound anti-Schottky interstitial cluster; for the CRG potential, the interstitial clusters have geometrically non-compact structures, yielding a more complex energy landscape. The rapid migration of interstitials and interstitial clusters are important for the irradiation response of UO 2 and correlates well with the very low barriers reported in a few historic experimental studies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Irradiation-enhanced diffusion and diffusion-limited creep in U 3 Si 2

U 3 Si 2 is an advanced fuel candidate due to its relatively high fissile density and attractive thermal properties. Compared to standard UO 2 fuel, there are significant data gaps for the thermophysical and thermomechanical properties of U 3 Si 2 . Point defect concentrations and mobilities under irradiation govern a number of important fuel performance properties, such as creep and fission gas release. In this work, we utilized density functional theory (DFT) data to inform a cluster dynamics framework to predict point defect concentrations in U 3 Si 2 under irradiation. Molecular dynamics (MD) simulations were used to examine the contribution of atomic mixing during ballistic cascades to diffusion, as well as the diffusivity of U and Si at grain boundaries. These atomic scale models for diffusivity were then used to inform a creep model based on bulk (Nabarro-Herring) and grain boundary (Coble) diffusional creep, and climb-limited dislocation creep. The model compares well against available experimental data and has been implemented in the BISON fuel performance code. Finally, a demonstration case using simple power profiles has been carried out, showing that negligible creep occurs due to the low temperatures experienced by U 3 Si 2 in-reactor, a consequence of its high thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Determination of Thermal Expansion, Defect Formation Energy, and Defect-Induced Strain of α-U Via ab Initio Molecular Dynamics

Uranium (U) is often alloyed with molybdenum (Mo) or zirconium (Zr) in order to stabilize its high-temperature body-centered cubic phase for use in nuclear reactors. However, in all metallic fuel forms, the α phase of U remains in some fraction. This phase decomposition due to temperature or compositional variance can play an outsized role on fuel performance and microstructural evolution. Relatively little is known about fundamental point defect properties in α -U at non-zero temperatures, from either computational or experimental studies. This work performs the first thorough evaluation of the α phase of U via ab initio molecular dynamics (AIMD). A number of thermophysical properties are calculated as a function of temperature, including equilibrium lattice parameters, thermal expansion, and heat capacity. These results indicate a two-region behavior, with the transition at 400 K. The thermal expansion/contraction in the a / b direction occurs rapidly from 100 up to 400 K, after which a more linear and gradual change in the lattice constant takes place. The volumetric expansion matches experiments quantitatively, but the individual lattice constant expansion only matches experiments qualitatively. Point defect formation energies and induced lattice strains are also determined as a function of temperature, providing insight on defect populations and the fundamentals of irradiation growth in α -U. Interstitials induce significantly more strain than vacancies, and the nature of that strain is highly dependent on the individual lattice directions. The direction of point defect-induced lattice strain is contrary to the irradiation growth behavior of α -U. This work shows that isolated point defects cannot be the primary driving force responsible for the significant irradiation-induced growth of α -U observed experimentally.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Ab-initio informed cluster dynamics simulation of self- and Xe diffusivity in uranium mononitride under irradiation

Uranium mononitride (UN) is one of the ceramic nuclear fuel alternatives to oxide fuels considered for light water reactor and advanced reactor designs, as it presents significant advantages such as high uranium density (better economics) and high thermal conductivity and melting point (increased safety). Self- and fission gas diffusivities need to be better understood, given that they influence key fuel performance phenomena like swelling and fission gas release. Recently, radiation enhanced diffusivity was investigated in UN by means of cluster dynamics simulations relying on empirical potential-based parameterizations, the reliability of which highly depends on the interatomic potential accuracy. Here, in this work, we refine this approach by determining, using ab-initio calculations, the properties of defect clusters containing vacancies, self-interstitials and Xe impurities. We also consider larger clusters than previous studies. The obtained dataset (formation enthalpies, entropies, and migration barriers) is used to parameterize a cluster dynamics model of mobile clusters, and to calculate the defect cluster concentrations under irradiation. This gives us access to the radiation enhanced self- and fission gas diffusivities. Although the resulting diffusivities are close to the values reported in the literature, we find important qualitative differences in the diffusion mechanisms. Capturing the correct mechanisms is crucial to properly describe the chemistry and fission rate dependence of the model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Micro X-ray computed tomography examination of mini plate fuel with hot isostatic pressed aluminum cladding

In order to minimize proliferation risks and improve security of nuclear material, the United States high performance research and test reactors (USHPRR) program is tasked with converting nuclear reactors that are fueled with highly enriched uranium (HEU) fuels to operate with low-enriched uranium (LEU) nuclear fuels. One favorable LEU fuel configuration is plate fuel with a metallic uranium-molybdenum foil clad within an aluminum alloy (AA 6061). In this fuel, the aluminum cladding is bonded with a hot isostatic pressing (HIP) method to seal the cladding around the fuel meat. However, the HIP process parameters influence the cladding performance, as a defective or incomplete bond can cause a pathway for corrosion. Micro X-ray computed tomography (XCT), a nondestructive technique that provides volumetric imaging, can be applied to inspect fuel plate cladding at the engineering scale. In this work, XCT methodology was developed and successfully utilized to not only observe the bond line of unirradiated mini fuel plates, but to also identify subsurface abnormalities in the plates’ cladding. Importantly, in future work, this technique could be applied to fuel plates, pre- and post-irradiation, to quantify irradiation effects on cladding defects and bond line integrity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Vacancy formation energies and migration barriers in multi-principal element alloys

Multi-principal element alloys (MPEAs) continue to garner interest as structural and plasma-facing materials due to their structural (phase) stability and increased resistance to radiation damage. Despite sensitivity of mechanical behavior to irradiation and point-defect formation, there has been scant attention on understanding vacancy stability and diffusion in refractory-based MPEAs. Using density-functional theory, we examine vacancy stability and diffusion barriers in body-centered cubic (Mo 0.95 W 0.05 ) 0.85 Ta 0.10 (TiZr) 0.05 . The results in this MPEA show strong dependence on environment, originating from local lattice distortion associated with charge-transfer between neighboring atoms that vary with different chemical environments. We find a correlation between degree of lattice distortion and migration barrier: (Ti, Zr) with less distortion have lower barriers, while (Mo, W) with larger distortion have higher barriers, depending up local environments. Under irradiation, our findings suggest that (Ti, Zr) are significantly more likely to diffuse than (Mo, W) while Ta shows intermediate effect. Finally, material degradation caused by vacancy diffusion can be controlled by tuning composition of alloying elements to enhance creep strength at extreme operating temperatures and harsh conditions.

36 MATERIALS SCIENCE↗
NASA NTRS1978

Study of electronic properties in proton- and electron-irradiated GaAlAs and GaAs solar cell materials

Diagnostical measurement techniques such as dark I-V, C-V, the thermally insulated capacitance, and the deep level transient spectroscopy methods were employed to study defect properties in the proton-irradiated n-GaAs materials. Defect energy levels, thermal emission rates, and capture cross sections of electrons as well as trap densities were deduced from these measurements and the results are presented. Correlations between the measured defect parameters and the dark I-V characteristics of the n-GaAs Schottky barrier diodes are also discussed. Defect energy levels (i.e., electron traps) determined are also compared with published data in order to identify their physical origins.

Li, S. S.↗
DOE OSTI2026

Kinetic interplay between chemical short-range order and grain boundaries in NiCoCr alloys under irradiation

Chemical short-range order (CSRO) and grain boundary (GB) engineering are routes to enhance radiation damage tolerance in alloys. Here, we reveal that CSRO and GB interact in a sink-strength-dependent manner under irradiation in NiCoCr. Near a weak sink (Σ3 GB), CSRO reduces defect cluster growth by slowing interstitial diffusion and enhancing vacancy-interstitial recombinations. In contrast, near strong sinks such as Σ5 GBs, CSRO and GB act competitively for interstitial accumulation but synergistically to suppress large stacking-fault tetrahedra growth via enhanced recombination. Such mechanistic duality underscores the need for coordinated control of CSRO stability and GB sink strength to enhance radiation damage tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Preferential hole defect formation in monolayer W Se 2 by electron-beam irradiation

Monolayer transition-metal dichalcogenides (TMDCs) have been extensively studied due to their wide range of physical properties and applications. It has been demonstrated that the electron beam in a transmission electron microscope (TEM) or scanning TEM (STEM) generates chalcogen vacancies that agglomerate into dispersed linelike or holelike defects. Here we employ a STEM electron beam and demonstrate that, in WSe 2 , beam-induced chalcogen vacancies initially form certain dispersed multivacancy structures, as seen in TMDCs in prior work. However, with suitable control of the STEM focused electron beam, these multivacancies gradually evolve into a dense network of ten-, 12-, 14-, and 16-member ring round holes, whereas the same process leads predominantly to chalcogen-vacancy line defects in other trigonal-prismatic TMDCs. Density functional theory calculations find that the underlying atomic-scale processes lead preferentially to defect structures that lower the total energy so that we are able to track the formation of the observed multivacancy complexes, which then lead to the formation of dense large round holes in WSe 2 . The same processes in WS 2 , however, are energetically unfavorable, while linear multivacancy defects are preferred, as observed. The demonstrated control of the formation of unique high-density round holes in WSe 2 has potential for applications such as atomic and molecular sieving.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of dose rate on the microstructure and deuterium retention in γ-LiAlO 2 pellets

This report presents experimental findings obtained from November 2024 to September 2025. Defect accumulation and microstructural evolution during ion irradiation at elevated temperatures are governed by two competing processes: defect production, driven by dose rate, and defect recovery, controlled by defect diffusion, interaction, and annihilation. At a given dose, the resulting microstructural evolution depends on both the dose rate and irradiation temperature. As a continuation of our FY24 tritium science project, which investigated temperature effects at a fixed dose rate, this study focuses on dose-rate effects at a fixed temperature to provide deeper insights into the irradiated microstructure and compositional changes in γ-LiAlO 2 pellets. The study aims to elucidate the impact of dose rate on microstructure, precipitate morphology, deuterium retention, and lithium volatility in γ-LiAlO 2 pellets under sequential 120 keV He + and 80 keV D 2 + ion irradiation. Three dose rates of 7.3×10 4 , 2.9×10 4 and 6.8×10 5 dpa/s were applied to achieve the same total ion fluence of 2×10 17 (He + +D + )/cm 2 at 500 °C, corresponding to a maximum combined dose of 7.55 dpa at ~255 nm. The irradiated pellets were subsequently characterized using scanning transmission electron microscopy (STEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The microstructural response of γ-LiAlO 2 to ion irradiation was found to be strongly dose-rate dependent. At medium and high dose rates, irradiation produced a surface amorphized layer and an underlying crystalline layer containing LiAl 5 O 8 precipitates, with implanted gases accumulating and forming blisters at the crystalline-amorphous interface. It remains to be investigated whether the amorphized layer was produced by He + ion irradiation prior to D 2 + ion irradiation. In contrast, at low dose rates, the material remained crystalline, with cavities, likely gas-filled, distributed around precipitates, within the γ-LiAlO 2 matrix, and along grain boundaries. While precipitate morphology exhibited anisotropy, their size showed little sensitivity to dose rate in the applied range of this study. This result, however, does not rule out the possibility that further reductions in dose rate could influence precipitate size. High dose-rate irradiation enhanced protonium–deuterium isotopic exchange and lithium depletion in the amorphized region. Collectively, the results show that dose rate governs amorphization, gas redistribution, isotopic exchange, and lithium depletion, providing important insights into the mechanisms underlying structural evolution in γ-LiAlO 2 pellets under reactor-relevant irradiation conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Simultaneous exposure to neutron radiation and hydrogen environment: Effect on hydrogen retention

Here, this study demonstrates a novel methodology that simultaneously exposes materials to both neutron irradiation and a hydrogen environment, enabling study on in pile interaction between radiation-induced defects and hydrogen in tungsten. The hydrogen environment was established by releasing hydrogen from vanadium hydride within an irradiation capsule. The hydrogen pressure during irradiation was estimated as 14.2 Torr. Post-irradiation thermal desorption spectroscopy analysis showed increased hydrogen retention in irradiated tungsten compared to unirradiated samples. Two dominant desorption peaks at ∼470 °C and ∼700 °C were observed in irradiated and unirradiated tungsten samples, suggesting similar trapping mechanisms between the two samples. However, an additional desorption peak at ∼800 °C in irradiated tungsten from the hydride capsule suggests an interplay between irradiation induced defects and hydrogen exposure, leading to the formation of additional hydrogen trapping sites. These findings provide critical insights into hydrogen retention in tungsten under fusion-relevant conditions and stimulate future studies to investigate the synergistic effects of neutron irradiation and hydrogen exposure.

08 HYDROGEN↗