Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ir”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Analytic model of an IR radiation heat pipe

An IR radiation heat pipe made from multilayer insulation blankets and proposed to be used aboard spacecraft to transfer waste heat was modeled analytically. A circular cross section pipe 9-in. in diameter, 10-ft long, with a specular reflectivity of 0.94 was found to have an efficiency of 58.6 percent. Several key parameters were varied for the circular model to understand their significance. In addition, square and triangular cross section pipes were investigated.

Hoffman, Pamela J.↗

Optical and near-IR study of LMC HII region N11AB

N11 (DEM 34), complex HII region located about 4 degrees from the center of the LMC bar, is a very interesting giant interstellar shell. It has a complicated structure and motion. It is located on the edge of an HI concentration. This is the progress report of the study of its two components, A and B at the optical and near-IR wavelengths to investigate stars, dust and ionized gas associated with them. N11A is a compact high-excitation blob and N11B is a bright HII region in this complex, which embeds OB association Lucke-Hodge 10.

Lee, Myung Gyoon↗

CO excitation in four IR luminous galaxies

The correlation between the CO and far infrared luminosities of spiral galaxies is well established. The luminosity ration, L sub FIR/L sub CO in IR luminous active galaxies is, however, systematically five to ten times higher than in ordinary spirals and molecular clouds in our Galaxy. Furthermore, the masses of molecular hydrogen in luminous galaxies are large, M (H2) approx. equals 10(exp 10) solar magnitude, which indicates the observed luminosity ratios are due to an excess of infrared output, rather than a deficiency of molecular gas. These large amounts of molecular gas may fuel luminous galaxies through either star formation or nuclear activity. This interpretation rests on applying the M (H2)/L sub CO ratio calibrated in our Galaxy to galaxies with strikingly different luminosity ratios. But are the physical conditions of the molecular gas different in galaxies with different luminosity ratios. And, if so, does the proportionality between CO and H2 also vary among galaxies. To investigate these questions researchers observed CO (2 to 1) and (1 to 0) emission from four luminous galaxies with the Institute for Radio Astronomy in the Millimeter range (IRAM) 30 m telescope. Researchers conclude that most of the CO emission from these Arp 193, Arp 220, and Mrk 231 arises in regions with moderate ambient densities similar to the clouds in the Milky Way molecular ring. The emission is neither from dense hot cloud cores nor from the cold low density gas characteristic of the envelopes of dark clouds.

Radford, Simon J. E.↗

Issues and directions in IR detector readout electronics

An introduction to the major issues encountered in the readout of imaging detector arrays in the infrared are presented. These include circuit issues such as multiplexing, buffering, and noise, as well as materials issues. Future directions in infrared readout electronics will also be discussed. These include on-chip signal processing and advanced hybridization schemes. Finally, recent work at Columbia on 2DEG-charge coupled devices for IR detector multiplexing are described.

Fossum, Eric R.↗

Ultraviolet, visual, and infrared studies of galactic extreme emission line objects with very large IR-excess

Some preliminary results of a study of extreme emission line objects (EELOs) are presented. These stars are selected from H alpha emission line stars having a strong IR excess. The study is based on multiwavelength photometric and spectroscopic observations. Special attention is paid to the detailed study of the correlation between spectroscopic and photometric variations, which indicate the activity of the star. The ultraviolet and infrared extinction characteristics of the circumstellar material are given special attention.

Dewinter, D.↗

Optical and near-IR imaging observations of comet Austin 1989c1

Near-nucleus imaging observations of comet Austin (1989c1) were carried out by the Japanese CCD imaging team. Six telescopes were used to monitor the time variation of the near-nucleus images in C2, CN, H2O, and Na continuum in the optical region, and in J, H, and K bands in the near-IR region. A featureless, round shape of the comet was revealed in all images. Although some of the jet features are recognized by using an image enhancement technique, the azimuthal difference of the intensity distribution is about 10 percent. The images in the H2O band show complex ion structures near the nucleus.

Watanabe, J.↗

Cryo-mechanical tests of Ames 24E2 IR-black coating

In addition to the ambient condition tape test, five mechanical tests of the IR-black coating, Ames 24E2, were performed at either liquid helium or liquid nitrogen temperatures. Tensile strain in the coating at liquid nitrogen temperature was measured up to values of 4E-3, both before and after the coating was cycled down to liquid helium temperature. When applied to an aluminum substrate which was then bent in liquid nitrogen, the aluminum substrate always failed (permanently deformed) well before the coating failed. Sinusoidal accelerations up to 45 Gs in liquid nitrogen and 25 Gs in liquid helium did not crack or otherwise visibly damage the coating. Both sinusoidal and random acceleration at about 90 K of a representative baffle vane structure, at frequencies from 10 to 2000 Hz and up to 15 Gs, did not damage the coating, even at the intersection of a baffle with the telescope tube. Thus on a macroscopic level, cryogenic cooling and various levels of acceleration and strain did not affect this coating. However, on a microscopic scale, some loose particles were found associated with several tests. Outgassing data are also given.

Smith, Sheldon M.↗

Hydrocarbon emission features in the IR spectra of warm supergiants

Observations in the 3-13 micron range are presented for two objects possessing the unidentified 21-micron feature, IRAS 22272 and IRAS 07134, which were obtained in the course of search for circumstellar aromatic hydrocarbon (PAH) emission bands. The 3.3 and 6.2 micron bands are attributed to circumstellar PAH molecules, and the 6-9 micron plateau and the 12- and 6.9-micron lines are attributed to larger, aromatic hydrocarbon clusters. These are the coolest stars known to exhibit the IR emission bands. The 21-micron feature is conjectured to also originate in a carbonaceous carrier.

Buss, R. H., Jr.↗

Optical alignment equipment and methods for visible and IR imaging meteorological radiometer

This paper describes the test equipment required for precise IR and visible channel microradian alignments for geosynchronous orbiting meteorological instruments. The test equipment design criteria, design, function and use are explained in detail. Wave front error measurements, vibration isolation, thermal compensation and stress free mounting configurations are described.

Herendeen, R.↗

Mesospheric effects of solar ultraviolet variations - Further analysis of SME IR ozone and Nimbus 7 SAMS temperature data

In order to improve the constraints on models of the mesospheric response to solar UV variations, an analysis is conducted of the Solar Mesosphere Explorer (SME) IR ozone data and Nimbus 7 stratosphere and mesosphere sounder (SAMS) temperature data. Maximum low-altitude ozone and temperature-response amplitudes occur at about the same altitude, where a strong coupling between photochemical and thermal components of the mesospheric response is suggested by the simultaneous positive temperature and negative ozone response maxima. Increased Lyman-alpha dissociation of water vapor and temperature feedback are theorized to account for the negative ozone response. HO(x) chemical heating can increase as ozone destruction increases, and can therefore account for the positive temperature response.

Hood, L. L.↗

Determination of absolute strengths of N2 quadrupole lines from high-resolution ground-based IR solar observations

The strength of S-branch lines of the N2 (1-0) electric quadrupole vibration-rotation band are determined by an analysis of solar absorption spectra. The solar data were recorded with a Fourier transform spectrometer and are characterized by high resolution, and a high signal-to-noise ratio. By extrapolating equivalent width measurements of the lines from varying air masses to zero air mass, the line strengths are found for the transitions from S7 to S10. The results presented do not include half widths and are found to be accurate to within 5 percent, and following a redetermination the N2 transitions are accurate to within 0.0002/cm. Line-of-sight atmospheric air masses associated with remotely sensed IR spectroscopic observations can be determined directly by utilizing the highly accurate data.

Demoulin, P.↗

IRS organigram

Charts and graphs relative to magnetoplasmadynamic (MPD) thruster technology are given. The research activities at the Institute of Space Transportation, University of Stuttgart, are summarized. Information is given on the Institute's Electric Propulsion and Plasma Wind Tunnel; thermal arcjet research; the nozzle-type thruster, DT-IRS; nozzle-type MPD thrusters; a hot anode thruster; the DT6 thruster; the ZT-1 thruster; the cylindrical MPD thruster; and a comparison of continuous and quasi-steady MPD.

Messerschmid, Ernst↗

UV, visible, and near-IR reflectivity data for magnetic soils/rocks from Brazil

The objective is to obtain UV, visible, and near-IR reflectivity spectra for several magnetic Brazilian soils/rocks and compare them to corresponding data for Mars to see if these materials satisfy both magnetic and spectral constraints for Mars. Selected physical properties of the magnetic Brazilian soils/rocks are presented. In general, the spectral features resulting from ferric crystal-field transitions are much better defined in the spectra of the magnetic Brazilian soils/rocks than in Martian spectral data. Presumably, this results from a relatively higher proportion of crystalline ferric oxides for the former. The apparent masking of the spectral signature of maghemite by hematite or goethite for the Brazilian samples implies the magnetic and spectral constraints for Mars can be decoupled. That is, maghemite may be present in magnetically-significant but optically-insignificant amounts compared to crystalline hematite.

Vempati, R. K.↗

Multiple scattering wavelength dependent backscattering of kaolin dust in the IR: Measurements and theory

Knowing the optical properties of aerosol dust is important for designing electro-optical systems and for modeling the effect on propagation of light in the atmosphere. As CO2 lidar technology becomes more advanced and is used for multiwavelength measurements, information on the wavelength dependent backscattering of aerosol dust particles is required. The volume backscattering coefficient of aerosols in the IR is relatively small. Thus, only a few field measurements of backscattering, usually at only a few wavelengths, are reported in the literature. We present spectral field measurements of backscattering of kaolin dust in the 9-11 micron wavelength range. As the quantity of dust increases, multiple scattering contributes more to the measured backscattered signal. The measurements show the effect of the dust quantity of the spectral backscatter measurements. A simple analytical two stream radiative transfer model is applied to confirm the measurements and to give insight to the multiple scattering spectra of backscattering.

Ben-David, Avishai↗

Cloud parameters from IR lidar and other instruments - CLARET design and preliminary results

The paper describes the objectives and experimental design of the Cloud Lidar and Radar Exploratory Test (CLARET) project. Early results for some of the objectives are presented. Particular attention is given to polarization of IR lidar backscatter, cirrus size distribution, and cirrus emissivity. CLARET has produced a good data set for cloud/radiation research and evaluation of remote sensing methods and technologies.

Eberhard, Wynn L.↗

Cryo-mechanical tests of Ames 24E2 IR-black coating

In addition to the ambient condition tape test, five mechanical tests of the IR-black coating, Ames 24E2, were performed at either liquid helium or liquid nitrogen teperatures. Tensile strain in the coating at liquid nitrogen temperature was measured up to values of 4E-3, both before and after the coating was cycled down to liquid helium temperature. When applied to an aluminum substrate which was then bent in liquid nitrogen, the aluminum substrate always failed (permanently deformed) well before the coating failed. Sinusoidal accelerations up to 45 Gs in liquid nitrogen and 25 Gs in liquid helium did not crack or otherwise visibly damage the coating. Both sinusoidal and random acceleration at about 90 K of a representative baffle vane structure, at frequencies from 10 to 2000 Hz and up to 15 Gs, did not damage the coating, even at the intersection of a baffle with the telescope tube. Thus on a macroscopic level, cryogenic cooling and various levels of acceleration and strain did not affect this coating. However, on a microscopic scale, some loose particles were found associated with several tests. Outgassing data are also given

Smith, Sheldon M.↗

Visible and near IR lidar backscatter observations on the GLOBE Pacific Survey missions

Measurement techniques and initial results of the Global Backscatter Experiment (GLOBE) performed in November 1989 and May-June 1990 to provide data on prevailing values of atmospheric backscatter cross section are presented. The upper troposphere aerosol scattering cross section was low in the Southern Hemisphere for the May-June flights and low in the Northern Hemisphere for the November flights. The initial results indicate that the instrumentation and calibration techniques applied for the near IR lidar measurements were successful.

Spinhirne, James D.↗