Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Impact loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Can OMPS and VIIRS Be Used as a Single Virtual Sensor for Aerosol Retrieval?

Satellite earth observation of aerosols using a single sensor have been done for more than three decades. The retrieved global distribution of column integrated aerosol optical depth (AOD) has been refined with higher accuracy and finer resolutions. However, the other aerosol properties, such as aerosol absorption and aerosol height, haven not been mapped as extensively using passive sensors. The detectors sensitive to these properties (UV-based sensors such as Aura-OMI) lack the adequate visible channels to tease out the absorption, height and loading contributions. In addition, their spatial resolution is prone to frequent cloud contamination impacting aerosol loading retrievals using only these spectral ranges. However, the deployment of the VIIRS and OMPS-NM sensors on the same Suomi NPP platform provides a first opportunity to carry out retrievals of aerosol single scattering albedo (SSA) and AOD with little cloud contamination using an expanded spectral range from the UV to the near-IR wavelengths. After collocated VIIRS pixel within the large OMPS footprint during the high resolution OMPS observing mode, we compared the radiance from OMPS and VIIRS to ensure the calibration from individual sensors are comparable. Then a look up table (LUT) was created for a smoke case over central Africa. The LUT is generated using 10 channels from 0.357 to 2.1 micron with 44 combinations of aerosol models and 4 different aerosol heights. With CALIOP and AERONET observation nearby, the possibility of using OMPS and VIIRS radiance as a single virtual sensor to simultaneously and consistently retrieve AOD, SSA, and aerosol height is explored.

Shi, Yingxi↗
NASA NTRS2004

TIGER: Development of Thermal Gradient Compensation Algorithms and Techniques

In a wind tunnel facility, the direct measurement of forces and moments induced on the model are performed by a force measurement balance. The measurement balance is a precision-machined device that has strain gages at strategic locations to measure the strain (i.e., deformations) due to applied forces and moments. The strain gages convert the strain (and hence the applied force) to an electrical voltage that is measured by external instruments. To address the problem of thermal gradients on the force measurement balance NASA-LaRC has initiated a research program called TIGER - Thermally-Induced Gradients Effects Research. The ultimate goals of the TIGER program are to: (a) understand the physics of the thermally-induced strain and its subsequent impact on load measurements and (b) develop a robust thermal gradient compensation technique. This paper will discuss the impact of thermal gradients on force measurement balances, specific aspects of the TIGER program (the design of a special-purpose balance, data acquisition and data analysis challenges), and give an overall summary.

Hereford, James↗
NASA NTRSDate not supplied

Astrobee Operations on the Iss: Gui’S Impact on the Operators’ Cognitive Load

The Astrobee free-flying robots have completed their fifth successful year of operations housed in the Japanese Experimental Module (JEM) on the International Space Station (ISS). In this paper, we introduce two Graphical User Interfaces (GUI) used to operate and monitor in real-time the Astrobee free-flying robots onboard the ISS and report on the impact these GUIs have in the operator’s cognitive load. A review of the state-of-the-art GUI design for remotely teleoperated scenarios with minimal time delay is presented and the study’s conclusion used to determine the elements and recommendations to create an interface that minimizes its impact on the overall performance of an operator during an activity at the ISS. The Ground Data System (GDS) is one of the two GUIs in the study: it contains several tabs, each of which displays a different set of controls for specific tasks e.g. Overview, Run Plan, Teleoperate, Guest Science; some also display video and a three-dimensional (3D) representation of the ISS and robot based on the Astrobee’s telemetry. Most tabs enable a single operator-robot connection, however some of its tabs are capable to monitor and control up to three Astrobees simultaneously. The GDS Helper is a text-based user interface created to facilitate commanding and monitoring of an Astrobee robot directly from an SSH session. In full interactive mode it displays a maximum of 5 sections: general commanding, feedback/ack, telemetry, guest science commanding, and data, all in one view. In batch mode, it enables complex command scripting while retaining some interactive capabilities. A comparative analysis between these GUIs is carried out at an analogous ISS environment at the NASA Ames Research Center’s Granite Lab and its results presented. While GDS is able to provide an operator with control and situational awareness via its video and 3D displays, its several tabs may introduce an overwhelming amount of information confusing and delaying the operator especially during time-sensitive maneuvers where the operator may need to switch back and forth between them. GDS helper in the other hand does not provide video or 3D displays thus not allowing an operator to attain situational awareness, however it provides the operator with a design displaying commonly used data in a single window, enabling the operator to understand the state of the robot at a glance and control it through a commands entered via keyboard instead of a combination of mouse clicks and keyboard input. The results of the experiments measure the cognitive load across several operators maneuvering Astrobee to accomplish tasks ranging from fully manual to supervised activities. A GUI combining a single window displaying data along video and a 3D display is expected to reduce the operator’s cognitive load.

Astrobee↗
NASA NTRS1987

Probabilistic SSME blades structural response under random pulse loading

The purpose is to develop models of random impacts on a Space Shuttle Main Engine (SSME) turbopump blade and to predict the probabilistic structural response of the blade to these impacts. The random loading is caused by the impact of debris. The probabilistic structural response is characterized by distribution functions for stress and displacements as functions of the loading parameters which determine the random pulse model. These parameters include pulse arrival, amplitude, and location. The analysis can be extended to predict level crossing rates. This requires knowledge of the joint distribution of the response and its derivative. The model of random impacts chosen allows the pulse arrivals, pulse amplitudes, and pulse locations to be random. Specifically, the pulse arrivals are assumed to be governed by a Poisson process, which is characterized by a mean arrival rate. The pulse intensity is modelled as a normally distributed random variable with a zero mean chosen independently at each arrival. The standard deviation of the distribution is a measure of pulse intensity. Several different models were used for the pulse locations. For example, three points near the blade tip were chosen at which pulses were allowed to arrive with equal probability. Again, the locations were chosen independently at each arrival. The structural response was analyzed both by direct Monte Carlo simulation and by a semi-analytical method.

Shiao, Michael↗
NASA NTRS2023

Damage Tolerance Study of Carbon Fiber/Epoxy Sandwich Structure in Support of the SLS Payload Adapter Fitting (PAF)

This study presents experimental results of impact and subsequent compression after impact (CAI) strength testing of sandwich structure representative of most of the acreage of a Payload Adaptor Fitting (PAF) that has been built at NASA’s Marshall Space Flight Center (MSFC). An instrumented drop weight tower was used to inflict different levels of impact damage to specimens. Load versus deflection of impact curves, visual damage, dent depth, damage as ascertained by thermography and cross-sectional microscopy were evaluated as part of the damage resistance of the structure. Compression After Impact (CAI) was performed to assess damage tolerance. The results show that at the amount of visual damage was highly dependent on whether the peel ply was present on the surface of the structure. The peel ply had some effect on the CAI strength values since the specimens with peel ply showed a 14% higher average CAI strength value. For all specimens tested in this study, CAI versus damage and CAI versus impact energy curves were plotted and it was found that damage size was a good indicator of CAI strength. It is suggested to use a b-basis damage tolerance curve based on damage size as a conservative measure of the load carrying capability of the sandwich structure with impact damage.

T1100/3960↗
NASA NTRS2020

Effects of Long-Duration Space Flight on Training Retention and Transfer

The space environment imposes on the astronaut crew significant physiological, psycho-social, and cognitive loads that can not be replicated on the ground. These loads likely impact crew performance. To date, no systematic data collection has taken place to understand the effects of such loads on crew members ability to retain trained knowledge and skills, and to transfer such knowledge and skills to novel situations. The research described here was originally requested by HRP management to be the first such study to systematically collect data on the effects of long duration space flight on training retention and transfer. Because current theories of retention and transfer are based on results obtained in university laboratories using undergraduate students as research participants, and because crew time in space is very expensive, this study was designed to compare the performance of 4 groups of subjects: crew members in space, crew members on the ground, crew-like subjects, and university undergraduate students. Results from the ground-phase of the study reported here demonstrate that crew members performance under cognitive load can not be predicted from the performance of university undergraduate students. It is still an open question the extent to which crew members cognitive performance in space can be predicted from the performance of crew members on the ground.

Barshi, Immanuel↗
NASA NTRS2020

Effects of Long-Duration Space Flight on Training Retention and Transfer

The space environment imposes on the astronaut crew significant physiological, psycho-social, and cognitive loads that can not be replicated on the ground. These loads likely impact crew performance. To date, no systematic data collection has taken place to understand the effects of such loads on crew members’ ability to retain trained knowledge and skills, and to transfer such knowledge and skills to novel situations. The research described here was originally requested by HRP management to be the first such study to systematically collect data on the effects of long duration space flight on training retention and transfer. Because current theories of retention and transfer are based on results obtained in university laboratories using undergraduate students as research participants, and because crew time in space is very expensive, this study was designed to compare the performance of 4 groups of subjects: crew members in space, crew members on the ground, crew-like subjects, and university undergraduate students. Results from the ground-phase of the study reported here demonstrate that crew members’ performance under cognitive load can not be predicted from the performance of university undergraduate students. It is still an open question the extent to which crew members’ cognitive performance in space can be predicted from the performance of crew members on the ground.

training↗
NASA NTRSDate not supplied

Astronauts' Performance: The Retention and Transfer of Training

The space environment imposes on the astronaut crew significant physiological, psycho-social, and cognitive loads that can not be replicated on the ground. These loads likely impact crew performance. To date, no systematic data collection has taken place to understand the effects of such loads on crew members’ ability to retain trained knowledge and skills, and to transfer such knowledge and skills to novel situations. The research described here was originally designed to be the first such study to systematically collect data on the effects of long duration space flight on training retention and transfer. Because current theories of retention and transfer are based on results obtained in university laboratories using undergraduate students as research participants, and because crew time in space is very expensive, this study was designed to compare the performance of 4 groups of subjects: crew members in space, crew members on the ground, crew-like subjects, and university undergraduate students. Results from the ground-phase of the study reported here demonstrate that crew members’ performance under cognitive load can not be predicted from the performance of university undergraduate students. It is still an open question the extent to which crew members’ cognitive performance in space can be predicted from the performance of crew members on the ground.

training↗
NASA NTRS2011

The Effects of Foam Thermal Protection System on the Damage Tolerance Characteristics of Composite Sandwich Structures for Launch Vehicles

For any structure composed of laminated composite materials, impact damage is one of the greatest risks and therefore most widely tested responses. Typically, impact damage testing and analysis assumes that a solid object comes into contact with the bare surface of the laminate (the outer ply). However, most launch vehicle structures will have a thermal protection system (TPS) covering the structure for the majority of its life. Thus, the impact response of the material with the TPS covering is the impact scenario of interest. In this study, laminates representative of the composite interstage structure for the Ares I launch vehicle were impact tested with and without the planned TPS covering, which consists of polyurethane foam. Response variables examined include maximum load of impact, damage size as detected by nondestructive evaluation techniques, and damage morphology and compression after impact strength. Results show that there is little difference between TPS covered and bare specimens, except the residual strength data is higher for TPS covered specimens.

Nettles, A. T.↗
NASA NTRS1990

Design, analysis, and testing of a reusable wingbox for ballistic evaluation of composite structures

Future fighter aircraft will continue to be subjected to severe mechanical loading and ballistic impact. In the past aircraft primary wing structure was constructed predominantly with aluminum, but with increasing aircraft performance the need for more structurally efficient materials is necessary. In an attempt to achieve structural efficiency requirements, aircraft designers have begun using an increasing amount of composite materials. Composite materials were indicated to have a low level of ballistic tolerance in some applications. Composite materials possess the characteristic of structural tailoring, which was utilized to demonstrate that survivability can be designed into a structure. The combat flight environment subjects fighter aircraft wing structures to the effects of combined loading during ballistic impact. These loads were previously demonstrated independently, i.e., the application of structural load, hydrodynamic ram damage, and the effects of airflow. The objective was to design a reusable test fixture for the ballistic evaluation of advanced composite structures under all the effects of combined loading. The fixture that was developed provides a test bed that can completely simulate the flight environment of a generic fighter aircraft wing, but can be used for an indefinite number and variety of tests. It is intended that this fixture will provide a standardized method of ballistically evaluating an advanced composite primary wing structure. This fixture will be used to accomplish the development of designs and/or advanced concepts that lead to a survivable composite wing structure.

Baron, W. G.↗
NASA NTRS1931

Load assumptions for the landing impact of seaplanes

The formula for the impact of floats must include the enlargement factor itself as well as the type of enlargement. The latter is preferably characterized by the change in surface loading. It is shown that the enlargement of a small seaplane generally results in a changed float (or boat) loading as well as wing loading. The conditions of starting stipulate the retention of the float loading when changing from single-float (boat) to twin-float arrangement. This contingency is followed by an increased impact factor in the twin-float type against the otherwise equivalent single-float type.

Taub, Josef↗
NASA NTRS1982

Lacquer Reveals Impact Damage in Composites

Brittle lacquer unveils effects normally visible only by ultrasonic inspection. Laquer coating measures spread of cracking and delamination in graphite/epoxy panels subjected to cyclic compression loads after impact damage. Test specimen is coated with lacquer on side opposite surface at which projectile will be fired. Spalled area shows effect of impact without removing specimen from test fixture.

Rhodes, M. D.↗
NASA NTRS2000

Satellite Measured Solar Protons from 1963-1993 and Their Influence on Ozone in a Changing Stratosphere

The fluxes of solar protons have been measured by a series of Interplanetary Monitoring Platform (IMP) satellites since 1963. Eight IMP satellites have been launched since 1963 providing excellent coverage of solar protons with energies from a few MeV to several hundred MeV. IMP 8, launched in October 1973, continues to provide proton measurements, twenty-six and a half (26 1/2) years after launch. These high energy solar protons rain down on the earth's polar atmosphere sporadically, primarily during solar proton events (SPEs) which typically last a few days. Solar protons with energies of 30 MeV or greater are capable of reaching the stratosphere and causing increases in odd nitrogen (NO(y)) constituents at polar latitudes ($>$ 60 degrees geomagnetic) which last for several months to years past the events. These enhanced NO(y) species can lead to significant upper stratospheric ozone depletions $ greater than $10\% during the gigantic SPEs that occurred in August 1972 and October 1989. We studied the effects of SPEs on the stratosphere from 1963 to the mid 1990s. During this time period, the stratospheric chlorine levels changed from relatively small in 1963 ($\sim$ 1 ppbv) to fairly substantial amounts in the mid-1990s ($\sim$ 3.3 ppbv). Our recently improved two-dimensional chemistry and transport atmospheric model was used to compute the effects of SPEs in this changing stratosphere. The long-lived SPE-produced NO(y) constituents were transported to lower stratospheric levels during winter after the events and caused impacts in the middle and lower stratosphere. Generally, the SPEs resulted in a decrease in ozone. However, during periods of high halogen loading these impacts resulted in interference with the chlorine and bromine loss cycles for ozone destruction. This interference actually led to a predicted total ozone increase that was especially notable in the time period 1992-4, a few years after the October 1989 SPE.

Jackman, Charles H.↗
NASA NTRS2010

Simplification of Fatigue Test Requirements for Damage Tolerance of Composite Interstage Launch Vehicle Hardware

The issue of fatigue loading of structures composed of composite materials is considered in a requirements document that is currently in place for manned launch vehicles. By taking into account the short life of these parts, coupled with design considerations, it is demonstrated that the necessary coupon level fatigue data collapse to a static case. Data from a literature review of past studies that examined compressive fatigue loading after impact and data generated from this experimental study are presented to support this finding. Damage growth, in the form of infrared thermography, was difficult to detect due to rapid degradation of compressive properties once damage growth initiated. Unrealistically high fatigue amplitudes were needed to fail 5 of 15 specimens before 10,000 cycles were reached. Since a typical vehicle structure, such as the Ares I interstage, only experiences a few cycles near limit load, it is concluded that static compression after impact (CAI) strength data will suffice for most launch vehicle structures.

Nettles, A. T.↗
NASA NTRS1987

Finite element analysis of steady and transiently moving/rolling nonlinear viscoelastic structure. III - Impact/contact simulations

In a three-part series of papers, a generalized finite element methodology is formulated to handle traveling load problems involving large deformation fields in structure composed of viscoelastic media. The main thrust of this paper is to develop an overall finite element methodology and associated solution algorithms to handle the transient aspects of moving problems involving contact impact type loading fields. Based on the methodology and algorithms formulated, several numerical experiments are considered. These include the rolling/sliding impact of tires with road obstructions.

Nakajima, Yukio↗
NASA NTRS1990

Damage tolerance certification methodology for composite structures

An advanced certification methodology was developed for composite structures to include the effects of impact damage. The methodology has the capability to determine the reliability of impact damaged structure at any prescribed load level and impact threat, which may be specified in terms of impact energy or C-scan damage area. In addition, the methodology can also calculate the allowable impact threat level at a given applied load and specified reliability. The developed damage tolerance certification methodology was demonstrated on the F/A-18 inner wing. The results of the methodology demonstration showed that the F/A-18 inner wing has excellent damage tolerance capability.

Kan, Han Pin↗