Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Using IR spectroscopy to determine biodiesel conversion

This project’s aim was to develop a way to use Infrared (IR) Spectroscopy to determine the extent of the conversion of oil to biodiesel produced during a typical transesterification process. The most reliable method of biodiesel analysis is gas chromatography with flame ionization detector (GC-FID) analysis. This analysis is not ideal for the educational or field applications since it is time intensive and requires expensive, specialized equipment. The use of the FT-IR is faster and more affordable. A calibration curve was created by comparing data on the purity of biodiesel samples obtained from the GC-FID analysis to the ratio of the absorbances at 1197 cm -1 to 1166 cm -1 from the FT-IR spectrum. For field application, a similar method was developed using a portable IR spectrometer, the InfraSpecTM VFA-IR spectrometer. As a result, the data collected gave a good linear fit for % purity of the samples and can be used as a method for monitoring the conversion of different types of oils to biodiesel and determining the purity of biodiesel produced from oil.

09 BIOMASS FUELS↗

Materials Data on Ir(SeBr3)3 by Materials Project

Ir(SeBr2)3(Br)3 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of twelve hydrobromic acid molecules and four Ir(SeBr2)3 clusters. In each Ir(SeBr2)3 cluster, Ir3+ is bonded in a distorted T-shaped geometry to three Se2- atoms. There are one shorter (2.41 Å) and two longer (2.42 Å) Ir–Se bond lengths. There are three inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a distorted trigonal non-coplanar geometry to one Ir3+ and two Br+0.33+ atoms. There are one shorter (2.38 Å) and one longer (2.40 Å) Se–Br bond lengths. In the second Se2- site, Se2- is bonded in a distorted trigonal non-coplanar geometry to one Ir3+ and two Br+0.33+ atoms. There are one shorter (2.37 Å) and one longer (2.41 Å) Se–Br bond lengths. In the third Se2- site, Se2- is bonded in a distorted trigonal non-coplanar geometry to one Ir3+ and two Br+0.33+ atoms. There are one shorter (2.39 Å) and one longer (2.41 Å) Se–Br bond lengths. There are six inequivalent Br+0.33+ sites. In the first Br+0.33+ site, Br+0.33+ is bonded in a single-bond geometry to one Se2- atom. In the second Br+0.33+ site, Br+0.33+ is bonded in a single-bond geometry to one Se2- atom. In the third Br+0.33+ site, Br+0.33+ is bonded in a single-bond geometry to one Se2- atom. In the fourth Br+0.33+ site, Br+0.33+ is bonded in a single-bond geometry to one Se2- atom. In the fifth Br+0.33+ site, Br+0.33+ is bonded in a single-bond geometry to one Se2- atom. In the sixth Br+0.33+ site, Br+0.33+ is bonded in a single-bond geometry to one Se2- atom.

36 MATERIALS SCIENCE↗

Materials Data on Ir(N3O4)3 by Materials Project

(Ir(NO2)6)2(N2)3 is alpha bismuth trifluoride structured and crystallizes in the cubic Fm-3m space group. The structure is zero-dimensional and consists of twelve ammonia molecules and four Ir(NO2)6 clusters. In each Ir(NO2)6 cluster, Ir3+ is bonded in a cuboctahedral geometry to twelve equivalent O2- atoms. All Ir–O bond lengths are 2.26 Å. N+2.33+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All N–O bond lengths are 1.95 Å. O2- is bonded in a 3-coordinate geometry to one Ir3+ and two equivalent N+2.33+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ir(NCl)4 by Materials Project

Ir(NCl)4 crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of one Ir(NCl)4 cluster. Ir4+ is bonded in a distorted trigonal bipyramidal geometry to three N and two Cl1- atoms. There are a spread of Ir–N bond distances ranging from 1.73–2.01 Å. There are one shorter (2.33 Å) and one longer (2.47 Å) Ir–Cl bond lengths. There are four inequivalent N sites. In the first N site, N is bonded in a distorted bent 120 degrees geometry to one Ir4+ and one Cl1- atom. The N–Cl bond length is 1.57 Å. In the second N site, N is bonded in a water-like geometry to two Cl1- atoms. There is one shorter (1.60 Å) and one longer (2.05 Å) N–Cl bond length. In the third N site, N is bonded in a single-bond geometry to one Ir4+ atom. In the fourth N site, N is bonded in a single-bond geometry to one Ir4+ atom. There are four inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one Ir4+ atom. In the second Cl1- site, Cl1- is bonded in a distorted single-bond geometry to one Ir4+ atom. In the third Cl1- site, Cl1- is bonded in a single-bond geometry to one N atom. In the fourth Cl1- site, Cl1- is bonded in a water-like geometry to two N atoms.

36 MATERIALS SCIENCE↗

Carbon monoxide chemistry of α-V70I Mo-nitrogenase: Evidence from EPR- and IR-monitored photolysis – or, what a difference a methyl makes

A critical step in the global nitrogen cycle is the conversion of dinitrogen into biologically accessible ammonia. In Nature this is accomplished by the nitrogenase (N 2 ase) family of enzymes. Carbon monoxide (CO) has long been known as an inhibitor of dinitrogen reduction by N 2 ase, but it can also be a substrate of the enzyme, when it is catalytically reduced to hydrocarbons. Understanding the CO interactions with N 2 ases are thus relevant to both dinitrogen fixation and Fischer-Tropsch-like chemistry. Here, in this work, the interaction of CO with the α-V70I variant of Azotobacter vinelandii MoFe N 2 ase was investigated using electron paramagnetic resonance (EPR) and infrared (IR) monitored photolysis of bound CO under cryogenic conditions. This was supplemented by further analysis of stopped-flow Fourier transform IR (SF-FT-IR) data under turnover conditions. The α-V70I variant adds a single methyl group close to the FeMo-cofactor active site, and the results show that this inhibits and slows, but does not substantially chemically change, the binding of CO to the FeMocofactor. The EPR spectra of both the hi-CO and lo-CO states closely resemble those from the wild-type enzyme. Similarly, the SF-FT-IR spectra of CO inhibited α-V70I and wild-type enzyme are strikingly similar, showing only small shifts in band energies which allow better interpretation of the published wild-type spectra. The extra carbon does, however, impact and inhibit the photochemical release and migration of CO at cryogenic temperatures, resulting in novel CO-bound species. These include a product species, termed Lo-1*, which may involve CO photochemically migrating on the FeMo-cofactor.

Carbon monoxide↗

Mock Target Window OTR and IR Design and Testing

In order to fully verify temperature measurements made on the target window using infrared (IR) optical non-contact methods, actual comparative measurements are made with a real beam distribution as the heat source using Argonne National Laboratory’s (ANL) 35 MeV electron accelerator. Using Monte Carlo N-Particle (MCNP) simulations and thermal Finite Element Analysis (FEA), a cooled mock target window with thermocouple implants is designed to be used in such a test to achieve window temperatures up to 700°C. An uncoated and blackcoated mock window is designed to enhance the IR temperature measurements and verify optical transmitted radiation (OTR) imagery. This allows us to fully verify and characterize our temperature accuracy with our current IR camera method and any future method we may wish to explore using actual production conditions. This test also provides us with valuable conclusions/concerns regarding the calibration method we developed using our IR test stand at TA-53 in MPF-14.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Reliable IR Line Lists for N2O and OCS Isotopologues for High Temperature Applications up to 2000 K

To address the needs of planetary and exoplanetary atmosphere studies towards JWST, HWO and future IR astronomy missions, theoretical IR line lists of Carbonyl Sulfide (OCS) and Nitrous Oxide (N2O) are generated to provide complete, reliable, and consistent IR reference data in the range of 0 - 15,000 cm-1, or wavelength longer than 0.67 Å, for temperature up to 2000 K. The line lists are quantum mechanically computed using spectroscopically accurate potential energy surfaces empirically refined with reliable high-resolution experimental data, and high-quality dipole moment surfaces constructed at CCSD(T) level with aug-cc-pVT/Q/5(+d)Z basis and extrapolations to complete basis set limit. The Ames N2O line list includes the primary isotopologue 14N2 16O (denoted "446") with J=0-210 and E' up to 25,000 cm-1, and 11 minor isotopologues of 15N and 17/18O with J=0-150 and lower E' cutoffs. For OCS, Ames "natural" 296 K line list includes 12 most abundant isotopologues. The intensity contribution of OCS minor isotopologues at higher temperature is non-negligible, e.g., 8.6 ± 4.9% at 1000 K. The 16O12C32S (93.7%) and 16O12C34S (4.2%) transitions are computed with J=0-240 and E'< 22,000 cm-1, plus J=0-150 and E' < 16,000 cm-1 for five more minor isotopologues. Reliable Effective Hamiltonian models (e.g., NOSL-296 for 14N2 16O), experimental data collections, and reliable HITRAN or MARVEL levels are combined with quantum rovibrational calculations to deliver accurate and consistent empirical corrections for line positions. The reliability and accuracy of our IR intensity predictions are demonstrated by comparison with available databases, line lists, and experiments, at both room temperature and at high temperature. The line lists will be freely available to public online at ZENODO and NAS data portal. We acknowledge the financial support from NASA XRP and APRA programs.

Planetary↗

NO Reduction with CO on Low‐loaded Platinum‐group Metals (Rh, Ru, Pd, Pt, and Ir) Atomically Dispersed on Ceria

Abstract Low‐loaded platinum‐group single‐atom catalysts on CeO 2 (M 1 /CeO 2 ) were synthesized via high‐temperature atom trapping (AT) and tested for the NO+CO reaction under dry and wet conditions. The activity of these catalysts for NO+CO reaction follows the order Rh>Pd≈Ru>Pt>Ir. For Rh, Ru, and Pd single‐atom catalysts, the N 2 O byproduct is formed but not clearly observed in Ir and Pt cases, which may result from the higher reaction temperature (>200 °C) required for Pt and Ir catalysts. The presence of water can promote the activity of these M 1 /CeO 2 catalysts for the NO+CO reaction. Under wet conditions, significant NH 3 formation occurred during the reaction, which is due to the co‐existence of water‐gas‐shift reaction on these catalysts. Compared with Pt, Pd and Ir, the Rh and Ru single‐atom catalysts show higher selectivity to NH 3 species, resulting from the hydride species on the surface. Among all tested catalysts, Ru 1 /CeO 2 shows the highest production of ammonia and highest CO conversion due to excellent water‐gas‐shift activity, whereas Pd 1 /CeO 2 shows lowest ammonia production. Rh 1 /CeO 2 shows the best low temperature NO reduction activity among all tested catalysts.

Tian, Jinshu↗

Open EFTs, IR effects & late-time resummations: systematic corrections in stochastic inflation

Though simple inflationary models describe the CMB well, their corrections are often plagued by infrared effects that obstruct a reliable calculation of late-time behaviour. Here we adapt to cosmology tools designed to address similar issues in other physical systems with the goal of making reliable late-time inflationary predictions. The main such tool is Open EFTs which reduce in the inflationary case to Stochastic Inflation plus calculable corrections. We apply this to a simple inflationary model that is complicated enough to have dangerous IR behaviour yet simple enough to allow the inference of late-time behaviour. We find corrections to standard Stochastic Inflationary predictions for the noise and drift, and we find these corrections ensure the IR finiteness of both these quantities. The late-time probability distribution, P(Φ), for super-Hubble field fluctuations are obtained as functions of the noise and drift and so these too are IR finite. We compare our results to other methods (such as large-N models) and find they agree when these models are reliable. In all cases we can explore in detail we find IR secular effects describe the slow accumulation of small perturbations to give a big effect: a significant distortion of the late-time probability distribution for the field. But the energy density associated with this is only of order H 4 at late times and so does not generate a dramatic gravitational back-reaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

IR-study of hydrated surface of oxide photocatalysts

IR spectroscopy combined with thermogravimetry was used to investigate the effect of the pretreatment temperature on the degree of coverage of the surface of oxide photocatalysts, TiO{sub 2}, ZnO, CeO{sub 2}, and Zn{sup 2+}/TiO{sub 2}, with water. At room temperature, the amount of adsorbed water per unit area of photocatalysts in the air decreases in the row: ZnO ≥ CeO{sub 2} > TiO{sub 2}, whereas the temperature needed for complete removal of physically adsorbed water from the studied oxides decreases in the reverse order. Water is removed from the ZnO surface by evacuation at room temperature; in the case of CeO{sub 2} and TiO{sub 2}, it desorbs at 200 and 300 °С, respectively. The terminal OH groups on the oxide surface are the most strongly bonded with adsorbed water. In the zinc modified TiO{sub 2}, the terminal OH groups are firstly replaced by Zn cations, which causes both hydrophobization of the samples under atmospheric conditions and a decrease in the temperature at which physically adsorbed water is released from the surface. Evacuation of ZnO at 350 °C removes the surface oxygen and results in the generation of the surface defect sites. This causes strong absorption in the IR spectra in the region of 1000—4000 cm{sup –1}. The formation of surface defects probably causes the appearance of donor levels in the band gap. The energy of the transition of electrons from these levels to the conduction band corresponds to the energy of the IR radiation. After oxidation of such samples in O{sub 2} at 350 °C, strong absorption in the IR spectra disappears.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure sensitivity of n -butane hydrogenolysis on supported Ir catalysts

Hydrogenolysis of alkanes has been widely reported as structure sensitive reaction on transition metal heterogeneous catalysts with metal particle sizes ranging between 1 and 20 nm. In this work, a series of Ir/MgAl 2 O 4 and Ir/SiO 2 catalysts with different Ir particle sizes ranging from subnanometer clusters (<1 nm) to nanoparticles (1–3 nm) were prepared and tested for n-butane hydrogenolysis. Our results show that the activity towards n-butane hydrogenolysis increases as Ir particle size increases in the lower particle size range, goes through a maximum at ~1.4–1.6 nm and then drops with a further increase in particle size. In this work, the product distribution at low temperature (170–190 °C) is dominated by central and terminal CAC bond cleavage of n-butane, and less by two CAC bond cleavage or further hydrogenolysis of the propane and ethane products. The selectivity to central CAC bond cleavage is highly dependent on the size of Ir and increases with a decrease in particle size down to ~1.4 nm but remains constant with further decrease in size. The results show that an Ir size of ~1.4 nm is optimum for n-butane hydrogenolysis activity and selectivity towards ethane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic site preferences and its effect on magnetic structure in the intermetallic borides M{sub 2}Fe(Ru{sub 0.8}T{sub 0.2}){sub 5}B{sub 2} (M=Sc, Ti, Zr; T=Ru, Rh, Ir)

The site preference for a class of intermetallic borides following the general formula M{sub 2}Fe(Ru{sub 0.8}T{sub 0.2}){sub 5}B{sub 2} (M=Sc, Ti, Zr; T=Ru, Rh, Ir), has been explored using ab initio and semi-empirical electronic structure calculations. This intermetallic boride series contains two potential sites, the Wyckoff 2c and 8j sites, for Rh or Ir to replace Ru atoms. Since the 8j site is a nearest neighbor to the magnetically active Fe atom, whereas the 2c site is a next nearest neighbor, the substitution pattern should play an important role in the magnetic structure of these compounds. The substitution preference is analyzed based on the site energy and bond energy terms, both of which arise from a tight-binding evaluation of the electronic band energy, and are known to influence the locations of atoms in extended solids. According to these calculations, the valence electron-rich Rh and Ir atoms prefer to occupy the 8j site, a result also corroborated by experimental evidence. Additionally, substitution of Rh or Ir at the 8j site results in a modification of the magnetic structure that ultimately results in larger local magnetic moment on the Fe atoms. - Graphical abstract: The site preference for electron rich atoms to occupy the 8j (gray) site is identified in these intermetallic borides, while the magnetic structure is modified as a function of the substituted atoms band center. Highlights: Black-Right-Pointing-Pointer We identify the energetics dictating the site preference in a series of intermetallic borides. Black-Right-Pointing-Pointer Establish substitution rules for use in future directed synthetic preparations. Black-Right-Pointing-Pointer Identified changes in magnetic structure that accompany the site preference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two Keggin-type heteropolytungstates with transition metal as a central atom: Crystal structure and magnetic study with 2D-IR correlation spectroscopy

Two Keggin-type heteropolytungstates, [Co(phen)₃]₃[CoW₁₂O₄₀]·9H₂O 1 (phen=1,10-phenanthroline) and [Fe(phen)₃]₂[FeW₁₂O₄₀]·H₃O·H₂O 2, have been synthesized via the hydrothermal technique and characterized by single crystal X-ray diffraction analyses, IR, XPS, TG analysis, UV–DRS, XRD, thermal-dependent and magnetic-dependent 2D-COS IR (two-dimensional infrared correlation spectroscopy). Crystal structure analysis reveals that the polyanions in compound 1 are linked into 3D supramolecule through hydrogen bonding interactions between lattice water molecules and terminal oxygen atoms of polyanion units, and [Co(phen)₃]²⁺ cations distributed in the polyanion framework with many hydrogen bonding interactions. The XPS spectra indicate that all the Co atoms in 1 are +2 oxidation state, the Fe atoms in 2 existing with +2 and +3 mixed oxidation states. - Graphical abstract: The magnetic-dependent synchronous 2D correlation IR spectra of 1 (a), 2 (b) over 0–50 mT in the range of 600–1000 cm⁻¹, the obvious response indicate two Keggin polyanions skeleton susceptible to applied magnetic field. Highlights: • Two Keggin-type heteropolytungstates with transition metal as a central atom has been obtained. • Compound 1 forms into 3D supramolecular architecture through hydrogen bonding between water molecules and polyanions. • Magnetic-dependent 2D-IR correlation spectroscopy was introduced to discuss the magnetism of polyoxometalate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PbGa6Te10 crystals for IR laser operated piezoelectricity

Highlights: • High-quality single crystals PbGa{sub 6}Te{sub 10} grown by Bridgman method. • PbGa{sub 6}Te{sub 10} crystals were characterized by X-ray photoelectron spectroscopy. • Temperature dependent thermal conductivity was investigated . • Was discovered a rare possibility to improve piezoelectric features using the external infrared laser beams. • The observed effect opens a new stage for the production of the IR operated devices including piezotronics. - Abstract: A ternary compound PbGa{sub 6}Te{sub 10} grown by Bridgman method was studied with respect to IR induced piezoelectricity. We have found an opportunity to induce piezoelectric features using the external infrared laser (IR) beams for PbGa{sub 6}Te{sub 10} crystals. The three principal wavelengths corresponding to fundamental 10.6 μm, doubled frequency 5.3 μm and third harmonic 3.5 μm laser beams were explored as photoinduced beams. Maximally achieved IR induced piezoelectricity was observed at laser induced wavelength 5.3 μm. The optimal photoinduced power density was varied within 150–160 MW/cm{sup 2} . The observed space gratings are very crucial for the observed photo-induced piezoelectricity, which is indicated, that we deal with interference of the photoinduced coherent beams. The role of the surface states was discussed based on the XPS spectra. Additionally, the temperature dependence of thermal diffusivity was measured. The determined thermal conductivity indicates prevailingly the phonon contribution and possesses very low values in the measured temperature ranges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of 3D dose distributions for HDR {sup 192}Ir brachytherapy sources with normoxic polymer gel dosimetry and treatment planning system

Radiation fluence changes caused by the dosimeter itself and poor spatial resolution may lead to lack of 3-dimensional (3D) information depending on the features of the dosimeter and quality assurance of dose distributions for high–dose rate (HDR) iridium-192 ({sup 192}Ir) brachytherapy sources is challenging and experimental dosimetry methods used for brachytherapy sources are limited. In this study, we investigated 3D dose distributions of {sup 192}Ir brachytherapy sources for irradiation with single and multiple dwell positions using a normoxic gel dosimeter and compared them with treatment planning system (TPS) calculations. For dose calibration purposes, 100-mL gel-containing vials were irradiated at predefined doses and then scanned in an magnetic resonance (MR) imaging unit. Gel phantoms prepared in 2 spherical glasses were irradiated with {sup 192}Ir for the calculated dwell positions, and MR scans of the phantoms were obtained. The images were analyzed with MATLAB software. Dose distributions and profiles derived with 1-mm resolution were compared with TPS calculations. Linearity was observed between the delivered dose and the reciprocal of the T2 relaxation time constant of the gel. The x-, y-, and z-axes were defined as the sagittal, coronal, and axial planes, respectively, the sagittal and axial planes were defined parallel to the long axis of the source while the coronal plane was defined horizontally to the long axis of the source. The differences between measured and calculated profile widths of 3-cm source length and point source for 70%, 50%, and 30% isodose lines were evaluated at 3 dose levels using 18 profiles of comparison. The calculations for 3-cm source length revealed a difference of > 3 mm in 1 coordinate at 50% profile width on the sagittal plane and 3 coordinates at 70% profile width and 2 coordinates at 50% and 30% profile widths on the axial plane. Calculations on the coronal plane for 3-cm source length showed > 3-mm difference in 1 coordinate at 50% and 70% and 2 coordinates at 30% profile widths. The point source measurements and calculations for 50% profile widths revealed a difference > 3 mm in 1 coordinate on the sagittal plane and 2 coordinates on the axial plane. The doses of 3 coordinates on the sagittal plane and 4 coordinates on the axial plane could not be evaluated in 30% profile width because of low doses. There was good agreement between the gel dosimetry and TPS results. Gel dosimetry provides dose distributions in all 3 planes at the same time, which enables us to define the dose distributions in any plane with high resolution. It can be used to obtain 3D dose distributions for HDR {sup 192}Ir brachytherapy sources and 3D dose verification of TPS.

61 RADIATION PROTECTION AND DOSIMETRY↗

IR fixed points in SU ( 3 ) gauge theories

We propose a novel RG method to specify the location of the IR fixed point in lattice gauge theories and apply it to the SU(3) gauge theories with N f fundamental fermions. It is based on the scaling behavior of the propagator through the RG analysis with a finite IR cutoff, which we cannot remove in the conformal field theories in sharp contrast to the confining theories. The method also enables us to estimate the anomalous mass dimension in the continuum limit at the IR fixed point. We perform the program for N f =16,12,8 and N f =7 and indeed identify the location of the IR fixed points in all cases.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

IR spectroscopic quantification of small molecule transport and desorption phenomena in polymers

The application, continued performance, and degradation behavior of polymers often depends on their interaction with small organic or gaseous volatiles. Understanding the underlying permeation and diffusion properties of materials is crucial for predicting their barrier properties (permeant flux), drying behavior, solvent loss or tendency to trap small molecules, as well as their interaction with materials in the vicinity due to off-gassing phenomena, perhaps leading to compatibility concerns. Further, the diffusion of low Mw organics is also important for mechanistic aspects of degradation processes. Based on our need for improved characterization methods, a FTIR-based spectroscopic gas/volatile quantification setup was designed and evaluated for determination of the diffusion, desorption and transport behavior of small IR-active molecules in polymers. At the core of the method, a modified, commercially available IR transmission gas cell monitors time-dependent gas concentration. Appropriate experimental conditions, e.g. desorption or permeation under continuous flow or static gas conditions, are achieved using easily adaptable external components such as flow controllers and sample ampoules. This study presents overview approaches using the same IR detection methodology to determine diffusivity (desorption into a static gas environment, continuous gas flow, or intermittent desorption) and permeability (static and dynamic flow detection). Further, the challenges encountered for design and setup of IR gas quantification experiments, related to calibration and gas interaction, are presented. These methods establish desorption and permeation behavior of solvents (water and methanol), CO 2 off-gassing from foam, and offer simultaneous measurements of the permeation of several gases in a gas mixture (CO 2 , CO and CH 4 ) through polymer films such as epoxy and Kapton. They offer complementary guidance for material diagnostics and understanding of basic properties in sorption and transport behavior often of relevance to polymer degradation or materials reliability phenomena.

36 MATERIALS SCIENCE↗

Ba 3 Fe 1.56 Ir 1.44 O 9 : A Polar Semiconducting Triple Perovskite with Near Room Temperature Magnetic Ordering

The crystal chemistry and magnetic properties for two triple perovskites, Ba 3 Fe 1.56 Ir 1.44 O 9 and Ba 3 NiIr 2 O 9 , grown as large, highly faceted single crystals from a molten strontium carbonate flux, are reported. Unlike the idealized A 3 MM 2 'O 9 hexagonal symmetry characteristic of most triple perovskites, including Ba 3 NiIr 2 O 9 , Ba 3 Fe 1.56 Ir 1.44 O 9 possesses significant site-disorder, resulting in a noncentrosymmetric polar structure with trigonal symmetry. The valence of iron and iridium in the heavily distorted Fe/Ir sites was determined to be Fe(III) and Ir(V) by X-ray absorption near edge spectroscopy (XANES). Density functional theory calculations were conducted to understand the effect of the trigonal distortion on the local Fe(III)O 6 electronic structure, and the spin state of iron was determined to be S = 5/2 by Mossbauer spectroscopy. Conductivity measurements indicate thermally activated semiconducting behavior in the trigonal perovskite. Magnetic properties were measured and near room temperature magnetic ordering (T N = 270 K) was observed for Ba 3 Fe 1.56 Ir 1.44 O 9 .

36 MATERIALS SCIENCE↗