Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPREGNATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Activated carbon fibers and engineered forms from renewable resources

A method of producing activated carbon fibers (ACFs) includes the steps of providing a natural carbonaceous precursor fiber material, blending the carbonaceous precursor material with a chemical activation agent to form chemical agent-impregnated precursor fibers, spinning the chemical agent-impregnated precursor material into fibers, and thermally treating the chemical agent-impregnated precursor fibers. The carbonaceous precursor material is both carbonized and activated to form ACFs in a single step. The method produces ACFs exclusive of a step to isolate an intermediate carbon fiber.

36 MATERIALS SCIENCE↗

Fabrication Status of ITER Central Solenoid Modules

The fabrication of the modules for the ITER Central Solenoid (CS) is in progress at General Atomics (GA) in Poway, California, USA. This purpose built facility has been established with the requisite tools and machines to fabricate the seven 110 tonne CS modules (six required plus one spare). GA’s project responsibility is completing the fabrication design, developing and qualifying the fabrication processes and tools, fabricating the seven modules, and testing the modules at 4.5 K with full current. The current schedule has the first module’s completing fabrication in 2018 followed by electrical and full current testing. Upon completion of testing, the modules will be shipped to the ITER site for assembly into the CS stack. GA has co mpleted the fabrication of a qualification coil, simulating all of the processes and exercising all of the tooling required to fabricate a production module. After completion, the qualification coil underwent a cool down cycle to 4.5K which served as the final commissioning step of the helium cooling system on the parallel flow paths of a module. In addition, other final test station systems and procedures were simulated to verify their functionality including simulated critical current sharing temperature (Tcs) measurements, DC switch operation to dump the energy from the coil, and a helium leak test on the coil at <10K. After warming the coil, Paschen tests were repeated prior to the coil being dissected to evaluate the quality of the vacuum pressure impregnation (VPI). Dissection is scheduled for early spring 2018 and the results showed full resin impregnation of all areas. In the production and testing of the qualification coil, many lessons were learned and the improvements incorporated into the module fabrication processes. GA currently has five production modules in fabrication, at different stages in the process. The first module is nearly ready for vacuum pressure impregnation. The second and third modules are currently in the insulation process and the 7 pancakes of the forth module are being joined together into a 110 tonne module. Module 5 is currently being wound. The qualification coil has been completed and dissected to evaluate the VPI. A description of the VPI process is provided. To verify the turn insulation of a module, unique impulse testing methods were developed to test the insulation between the 560 turns of a module. These methods are reported in this paper.

Smith, J.↗

Compressed Expanded Natural Graphite (CENG) Processing for PCM Composites

The use of phase change materials (PCMs) in thermal energy storage applications has received considerable attention in recent decades. Organic PCMs are popular due to their high latent heat of fusion, noncorrosive properties, and relative stability over many charge and discharge cycles. A primary limitation of these materials is their low thermal conductivity. This has led researchers to develop various methods to increase thermal conductivity by seeding PCM with or impregnating them into more conductive materials. One method is to impregnate PCMs into compressed expanded natural graphite (CENG) matrices, which can improve thermal conductivity by a factor of 100. CENG matrices have received particular interest due to their low cost, high porosity, small (nano/micro) pore size, high pore density, high thermal conductivity, and ability to be compressed into many geometries. PCM/CENG matrix composites have been extensively studied; however, the effect that CENG processing has on PCM saturation and the overall matrix thermal conductivity has not been well investigated. This processing includes four major steps including graphite intercalation, thermal shock, compression, and PCM saturation. Intercalation involves soaking graphite flakes in sulfuric and/or nitric acid to intercalate the acids between the graphene layers. The graphite flakes are then subjected to a high-temperature thermal shock, during which the intercalated acid is gasified rapidly, pushing the graphene layers apart, resulting in accordion-shaped graphite "worms". The "worms" are then compacted to a desired bulk density and then soaked with molten PCM until fully saturated. The properties of the produced CENG matrix, and its ability to allow PCM permeation, are sensitive to the processing parameters, namely, the thermal shock temperature and exposure time, as well as the matrix apparent density or porosity. Here, we study the effect of the thermal shock conditions necessary to expand intercalated graphite flakes on PCM saturation and the expanded graphite's thermal conductivity and morphology. We found that the thermal shock temperature exhibits the greatest influence. At greater shock temperatures, SEM images showed that expanded graphite worms exhibited greater density of pores, thus increasing total surface area within the matrices. Increasing thermal shock temperature yielded greater overall PCM saturation, as well as an increased rate of saturation. Improvements in PCM saturation rate and overall saturation are obtained as the shock temperature is increased. Longer exposure to thermal shock also improves initial saturation rates and is beneficial if a shortened impregnation time is needed. Thermal shock conditions did not impact thermal conductivity; however, conductivity was largely affected by matrix porosity. A local maximum in axial thermal conductivity was observed at around 83% porosity, which is similar to that observed in previous studies.

compressed expanded natural graphite↗

Production of synthesis gas from natural gas with copper—iron—manganese oxide oxygen carriers/catalysts via partial oxidation and dry reforming processes

Materials, methods of making, and methods of providing a trimetallic oxygen carrier for converting methane containing fuel to synthesis gas. The trimetallic oxygen carrier comprises CuxFeyMnzOt, where CuxFeyMnzOt is a chemical composition with 0 < x ≤ 3 and 0 < y ≤ 3 and 0 < z ≤ 3 and, 0 < t ≤ 5. For example, CuxFeyMnzOt may be one of CuMnFeO 4 , CuFe 0.5 Mn 1.5 O 4 , CuFeMn 2 O 4 , CuFe 2 MnO 4 , or Cu impregnated on FerMnsOu, Fe impregnated on CurMnsOu, Mn impregnated on CurFesOu where r > 0, s > 0 and u > 0 and combinations thereof. Reaction of trimetallic CuxFeyMnzOt with methane generates a product stream comprising at least 50 vol. % CO and H 2 .

Siriwardane, Ranjani V.↗

Silylated Co/SBA-15 catalysts for Fischer-Tropsch synthesis

A series of silylated Co/SBA-15 catalysts were prepared via the reaction of surface Si-OH of SBA-15 with hexamethyldisilazane (HMDS) under anhydrous, vapor-phase conditions, and then characterized by FT-IR, N{sub 2} physisorption, TG, XRD, and TPR-MS. The results showed that organic modification led to a silylated SBA-15 surface composed of stable hydrophobic Si-(CH{sub 3}){sub 3} species even after calcinations and H{sub 2} reduction at 673 K. Furthermore, the hydrophobic surface strongly influenced both metal dispersion and reducibility. Compared with non-silylated Co/SBA, Co/S-SBA (impregnation after silylation) showed a high activity, due to the better cobalt reducibility on the hydrophobic support. However, S-Co/SBA (silylation after impregnation) had the lowest FT activity among all the catalysts, due to the lower cobalt reducibility along with the steric hindrance of grafted -Si(CH{sub 3}){sub 3} for the re-adsorption of {alpha}-olefins. -- Graphical abstract: The silylation of an SBA-15 before cobalt impregnation enhanced the reducibility of cobalt oxides on an SBA-15-supported cobalt catalyst and consequently increased the catalytic activity for Fischer-Tropsch synthesis. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Cluster-Derived PtFe/SiO(2) Catalysts for the Oxidation of CO

Infrared (FTIR) and extended X-ray absorption fine structure (EXAFS) spectroscopy measurements were used to characterize the species formed after impregnation of Pt{sub 5}Fe{sub 2}(COD){sub 2}(CO){sub 12} onto silica, before and after removal of the organic ligands. The results indicate that the Pt{sub 5}Fe{sub 2}(COD){sub 2}(CO){sub 12} cluster adsorbs weakly on the SiO{sub 2} surface. Nevertheless, partial disintegration of the cluster was observed during aging even under He and at room temperature, related to the loss of CO ligands due to their interactions with silanol groups of the support. The organic ligands can be removed from a freshly impregnated cluster by thermal treatment in either He or H{sub 2}, but the surface species formed in each case have different structures. Treatment in He at 350 {sup o}C leads to a complete disintegration of the Pt-Fe bimetallic core and results in the formation of highly dispersed Pt clusters with a nuclearity of six, along with surface Fe oxide-like species. In contrast, bimetallic PtFe nanoparticles with an average size of approximately 1 nm were formed when a similar H{sub 2} treatment was used. In this case, a greater degree of metal dispersion and a larger fraction of Pt-Fe interactions were observed compared to the PtFe/SiO{sub 2} samples prepared by co-impregnation of monometallic salt precursors. Electronic interactions between Pt and Fe atoms in such cluster-derived samples led to an increased electron density on platinum, as indicated by a red shift of the frequencies of FTIR bands for adsorbed NO and CO. These electronic interactions affect the strength of the CO adsorption on platinum. All bimetallic samples were found to be more active than Pt/SiO{sub 2} for the oxidation of CO in air; however, the activity depends strongly on the structure of the surface species, the fraction of Pt-Fe bimetallic contributions, the degree of electronic interactions between Pt and Fe, and the strength of the CO adsorption on platinum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical Behavior Analysis of a Test Coil for MICE Coupling Solenoid during Quench

The coupling magnet for the Muon Ionization Cooling Experiment has a self-inductance of 592 H and the magnet stored energy of 13 MJ at a full current of 210 A for the worst operation case of the MICE channel. The high level of stored energy in the magnet can cause high peak temperature during a quench and induce considerable impact of stresses. One test coil was built in order to validate the design method and to practice the stress and strain situation to occur in the coupling coil. In this study, the analysis on stress redistribution during a quench with sub-divided winding was performed. The stress variation may bring about failure of impregnating material such as epoxy resin, which is the curse of a new normal zone arising. Spring models for impregnating epoxy and fiber-glass cloth in the coil were used to evaluate the mechanical disturbance by impregnated materials failure. This paper presents the detailed dynamic stress and stability analysis to assess the stress distribution during the quench process and to check whether the transient loads are acceptable for the magnet.

42 ENGINEERING↗

Studies on KIT-6 Supported Cobalt Catalyst for Fischer–Tropsch Synthesis

KIT-6 molecular sieve was used as a support to prepare cobalt catalyst for Fischer-Tropsch synthesis (FTS) using an incipient wetness impregnation method to produce cobalt loadings of 15 and 25 wt%. The catalysts were characterized by BET surface area, X-ray diffraction, scanning transmission election microscopy (STEM), extended X-ray absorption fine spectroscopy and X-ray absorption near edge spectroscopy. The catalytic properties for FTS were evaluated using a 1L CSTR reactor. XRD, pore size distribution, and STEM analysis indicate that the KIT-6 mesostructure remains stable during and after cobalt impregnation and tends to form smaller cobalt particles, probably located inside the mesopores. The mesoporous KIT-6 exhibited a slightly higher cobalt dispersion compared to amorphous SiO{sub 2} supported catalyst. With the higher Co loading (25 wt%) on KIT-6, partial structural collapse was observed after the FTS reaction. Compared to an amorphous SiO{sub 2} supported cobalt catalyst, KIT-6 supported cobalt catalyst displayed higher methane selectivity at a similar Co loading, likely due to diffusion effects.

01 COAL, LIGNITE, AND PEAT↗

High Xylose Yields from Dilute Acid Pretreatment of Corn Stover Under Process-Relevant Conditions

Pretreatment experiments were carried out to demonstrate high xylose yields at high solids loadings in two different batch pretreatment reactors under process-relevant conditions. Corn stover was pretreated with dilute sulfuric acid using a 4-l Steam Digester and a 4-l stirred ZipperClave{reg_sign} reactor. Solids were loaded at 45% dry matter (wt/wt) after sulfuric acid catalyst impregnation using nominal particle sizes of either 6 or 18 mm. Pretreatment was carried out at temperatures between 180 and 200 C at residence times of either 90 or 105 s. Results demonstrate an ability to achieve high xylose yields (>80%) over a range of pretreatment conditions, with performance showing little dependence on particle size or pretreatment reactor type. The high xylose yields are attributed to effective catalyst impregnation and rapid rates of heat transfer during pretreatment.

09 BIOMASS FUELS↗

In-situ 3D visualization of composite microstructure during polymer-to-ceramic conversion

One route for producing fiber-reinforced ceramic-matrix composites entails repeated impregnation and pyrolysis of a preceramic polymer in a fiber preform. The process relies crucially on the development of networks of contiguous cracks during pyrolysis, thereby allowing further impregnation to attain nearly-full densification. The present study employs in-situ x-ray computed tomography (XCT) to reveal in three dimensions the evolution of matrix structure during pyrolysis of a SiC-based preceramic polymer to 1200 °C. Observations are used to guide the development of a taxonomy of crack geometries and crack structures and to identify the temporal sequence of their formation. A quantitative analysis is employed to characterize effects of local microstructural dimensions on the conditions required to form cracks of various types. Complementary measurements of gas evolution and mass loss of the preceramic polymer during pyrolysis as well as changes in mass density and Young's modulus provide context for the physical changes revealed by XCT. Furthermore, the findings provide a foundation for future development of physics-based models to guide composite fabrication processes.

36 MATERIALS SCIENCE↗

Synthesis and stabilization of small Pt nanoparticles on TiO 2 partially masked by SiO 2

Controlling metal nanoparticle size and preserving metal dispersion at elevated temperature remain key challenges in designing new supported metal catalysts. Many methods have been proposed to stabilize metal nanoparticles for catalysis, but the use of specialized equipment or metal precursors can limit the application of these methods for scalable production. Here, we demonstrate a synthesis strategy to improve the dispersion and thermal stability of Pt nanoparticles on an oxide support. A thin SiO 2 coat (<2 nm) was deposited on TiO2 through repeated condensation cycles of tetraethyl orthosilicate (TEOS) with or without an organic template on the surface. H 2 PtCl 6 was deposited using wetness impregnation, and the samples were dried, calcined, and reduced. The as-synthesized Pt nanoparticles are 1–2 nm by TEM and maintain dispersion >45% by CO chemisorption even after prolonged heating at 500 °C, whereas Pt nanoparticles on unmodified TiO 2 are less dispersed (~33%) and their dispersion falls further upon prolonged heating. Ethylene hydrogenation demonstrates that the Pt nanoparticles on modified TiO 2 preserve the catalytic activities of Pt on unmodified TiO 2 . The use of wet chemistry-based oxide modification and wetness impregnation makes this strategy a scalable and generalizable synthesis method to prepare other supported metal nanoparticles for catalysis applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of catalyst synthesis method on selective catalytic reduction (SCR) of NO by NH 3 with V 2 O 5 -WO 3 /TiO 2 catalysts

We compared the molecular structures, surface acidity and catalytic activity for NO/NH 3 /O 2 SCR of V 2 O 5 -WO 3 /TiO 2 catalysts for two different synthesis methods: co-precipitation of aqueous vanadium and tungsten oxide precursors with TiO(OH) 2 and by incipient wetness impregnation of the aqueous precursors on a reference crystalline TiO 2 support (P25; primarily anatase phase). Bulk analysis by XRD showed that co-precipitation results in small and/or poorly ordered TiO 2 (anatase) particles and that VO x and WO x do not form solid solutions with the bulk titania lattice. Surface analysis of the co-precipitated catalyst by High Sensitivity-Low Energy Ion Scattering (HS-LEIS) confirms that the VO x and WO x are surface segregated for the co-precipitated catalysts. In situ Raman and IR spectroscopy revealed that the vanadium and tungsten oxide components are present as surface mono-oxo O = VO 3 and O = WO 4 sites on the TiO 2 supports. Co-precipitation was shown for the first time to also form new mono-oxo surface VO 4 and WO 4 sites that appear to be anchored at surface defects of the TiO 2 support. IR analysis of chemisorbed ammonia showed the presence of both surface NH 3 * on Lewis acid sites and surface NH 4 +* on Brønsted acid sites. TPSR spectroscopy demonstrated that the specific SCR kinetics was controlled by the redox surface VO 4 species and that the surface kinetics was independent of TiO 2 synthesis method or presence of surface WO 5 sites. SCR reaction studies revealed that the surface WO5 sites possess minimal activity below ~325 °C and their primary function is to increase the adsorption capacity of ammonia. A relationship between the SCR activity and surface acidity was not found. The SCR reaction is controlled by the surface VO 4 sites that initiate the reaction at ~200 °C. The co-precipitated catalysts were always more active than the corresponding impregnated catalysts. Finally, we ascribe the higher activity of the co-precipitated catalysts to the presence of the new surface WO x sites associated surface defects on the TiO 2 support that increase the ammonia adsorption capacity.

36 MATERIALS SCIENCE↗

Catalysts at work: From integral to spatially resolved X-ray absorption spectroscopy

Spectroscopic studies on heterogeneous catalysts have mostly been done in an integral mode. However, in many cases spatial variations in catalyst structure can occur, e.g. during impregnation of pre-shaped particles, during reaction in a catalytic reactor, or in microstructured reactors as the present overview shows. Therefore, spatially resolved molecular information on a microscale is required for a comprehensive understanding of theses systems, partly in ex situ studies, partly under stationary reaction conditions and in some cases even under dynamic reaction conditions. Among the different available techniques, X-ray absorption spectroscopy (XAS) is a well-suited tool for this purpose as the different selected examples highlight. Two different techniques, scanning and full-field X-ray microscopy/tomography, are described and compared. At first, the tomographic structure of impregnated alumina pellets is presented using full-field transmission microtomography and compared to the results obtained with a scanning X-ray microbeam technique to analyse the catalyst bed inside a catalytic quartz glass reactor. On the other hand, by using XAS in scanning microtomography, the structure and the distribution of Cu(0), Cu(I), Cu(II) species in a Cu/ZnO catalyst loaded in a quartz capillary microreactor could be reconstructed quantitatively on a virtual section through the reactor. An illustrating example for spatially resolved XAS under reaction conditions is the partial oxidation of methane over noble metal-based catalysts. In order to obtain spectroscopic information on the spatial variation of the oxidation state of the catalyst inside the reactor XAS spectra were recorded by scanning with a micro-focussed beam along the catalyst bed. Alternatively, full-field transmission imaging was used to efficiently determine the distribution of the oxidation state of a catalyst inside a reactor under reaction conditions. The new technical approaches together with quantitative data analysis and an appropriate in situ catalytic experiment allowed drawing important conclusions on the reaction mechanism, and the analytical strategy might be similarly applied in other case studies. The corresponding temperature profiles and the catalytic performance were measured by means of an IR-camera and mass spectrometric analysis. In a more advanced experiment the ignition process of the partial oxidation of methane was followed in a spatiotemporal manner which demonstrates that spatially resolved spectroscopic information can even be obtained in the subsecond scale.

03 NATURAL GAS↗

Preparation and drug release behavior of temperature-responsive mesoporous carbons

A temperature-responsive composite based on poly (N-isopropylacrylamide) (PNIPAAm) and ordered mesoporous carbons (OMCs) has been successfully prepared by a simple wetness impregnation technique. The structures and properties of the composite were characterized by infrared spectroscopy (IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), N{sub 2} sorption, thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). The results showed that the inclusion of PNIPAAm had not greatly changed the basic ordered pore structure of the OMCs. Ibuprofen (IBU) was selected as model drug, and in vitro test of IBU release exhibited a temperature-responsive controlled release delivery. - Graphical abstract: The bands located at 1650 and 1549 cm{sup -1} could be assigned to C=O stretching and N-H bending vibrations for polymer PNIPAAm (a). The bands at 1388 and 1369 cm{sup -1} were due to isopropyl group, and the band at 1459 cm{sup -1} was related to the bending vibration of C-H (a). For the PNIPAAm/OMCs composite, the characteristic bands of polymer were still observed besides those for carbon materials and the bands at around 1585 cm{sup -1} and a broad band at about 1100 cm{sup -1} were characteristics for the carbon materials(c). In addition, little shifts of C=O and N-H bands compared to the pure PNIPAAm were also observed (b), indicating a weak interaction between the polymer and carbon material. These results could be a proof that the PNIPAAm has been incorporated into the carbon material. Highlights: > A temperature-responsive PNIPAAm/OMCs composite was successfully synthesized by a simple wetness impregnation technique for the first time. > The inclusion of PNIPAAm had not greatly changed the basic ordered pore structure of the OMCs. > In vitro test of IBU release exhibited a temperature-responsive controlled release delivery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and photocatalytic properties of lithium tantalate

Lithium tantalate (LiTaO{sub 3}) was successfully synthesized thorough an impregnation method of tantalum pentaoxide in the aqueous solution of lithium hydroxide. Next, the sample was divided into eight batches and calcinated in a temperature range of 450-800 Degree-Sign C. The materials produced were then characterized by X-ray diffraction, Raman spectroscopy, Diffuse Reflectance (DR) UV-vis spectroscopy, BET analysis, and high resolution transmission electron microscopy. Moreover, the samples were tested as photocatalysts in a reaction of hydrogen generation. Interestingly, it was found that the sample calcinated at 550 Degree-Sign C exhibits the highest photocatalytic activity. This sample is composed of 85% of LiTaO{sub 3} and 15% of Ta{sub 2}O{sub 5}. - Highlights: Black-Right-Pointing-Pointer LiTaO{sub 3} was synthesized thorough an impregnation of Ta{sub 2}O{sub 5} and LiOH and calcination at the temperature range of 450-800 Degree-Sign C. Black-Right-Pointing-Pointer Each calcinated sample was tested as photocatalyst in the reaction of hydrogen generation. Black-Right-Pointing-Pointer It was found that the key parameter determining their activity is the sample composition. Black-Right-Pointing-Pointer The sample exhibiting the highest activity is composed of LiTaO{sub 3} (85.1%) and unreacted Ta{sub 2}O{sub 5} (14.9%).

36 MATERIALS SCIENCE↗

Preparation and characterization of V/TiO{sub 2} nanocatalyst with magnetic nucleus of iron

Graphical abstract: - Highlights: • Fe-V/TiO{sub 2} nanocatalyst is prepared. • Combination of sol–gel and wetness impregnation methods. • Facile separation of catalyst from medium by magnet. - Abstract: A magnetic composite containing V/TiO{sub 2} was prepared by combination of sol–gel and wetness impregnation methods. The effects of synthesis temperature, different weight percents of Fe supported on TiO{sub 2}, vanadium loading and the heating rate of calcination on the structure and morphology of nanocatalyst were investigated. The optimum conditions for synthesized catalyst were 40 wt.% of Fe, 15 wt.% of V and synthesis temperature equal to 30 °C. Characterization of catalyst is carried out using XRD, TGA, DSC, SEM, FTIR and N{sub 2} physisorption measurements. The magnetic character of nanocatalyst was measured using VSM, which showed the typical paramagnetic behavior of sample at room temperature with a saturation magnetization value equal to 8.283 emu/g. The nanocatalyst has a particle size about 56 nm and can easily be separated from medium by a magnet.

36 MATERIALS SCIENCE↗

Effect of Ce doping on the resistance of Na over V2O5-WO3/TiO2 SCR catalysts

Highlights: • Different forms of Na poisoning CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts were prepared by impregnation method. • The comparison of the poisoning effect between Na{sub 2}O and NaCl over Ce{sub 10}VWTi catalyst was studied. • The poisoning effect of Na{sub 2}O is lighter than that of NaCl because the 4Na{sub 2}O-Ce{sub 10}VWTi catalyst exists more acid sites. • The reasons contributing to the catalytic activity and Na poisoning resistance of CeVWTi catalyst were proposed. - Abstract: Enhanced performance of Ce doping on the catalytic activity of V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts and its resistance properties to Na poisoning have been investigated in the research. Different Na species (NaCl and Na{sub 2}O) were deposited on CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts by impregnation method. The results presented that CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts exhibited a higher NH{sub 3}-SCR activity and better Na resistance than the V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalyst, and its poisoning resistance to Na{sub 2}O is more superior than to NaCl, caused by more acid sites over the 10%CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} (Ce{sub 10}VWTi) catalyst, which indicated that the poisoning resistance of Na{sub 2}O on Ce{sub 10}VWTi catalysts is higher than that of NaCl. Combined with the characterization results, the dopant of Ce could enhance the surface chemisorbed oxygen on the Na poisoning V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts, facilitate the redox cycle, and increase the intensity of acid sites due to the newly formed Brønsted acid sites stemmed from Ce{sup 3+}−NH{sub 4}{sup +}, thereby promoting catalytic activity and Na poisoning resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charcoal from anaerobically digested dairy fiber for removal of hydrogen sulfide within biogas

Highlights: • Anaerobically digested (AD) fiber was used for charcoal production via pyrolysis. • Charcoal from AD fiber can effectively adsorb H{sub 2}S from biogas. • Impregnation of charcoal from AD fiber with Na{sub 2}CO{sub 3} increases H{sub 2}S sorption capacity. • Ash in the AD fiber helps the retention of S on the surfaces of the char. • Charcoal manufacture is a promising approach to use abundant AD fiber. - Abstract: Anaerobically digested fibrous solid (AD fiber) is an abundant material that offers potential to produce value-added products such as biochar. The objective of this paper is to better understand how thermochemical processing conditions affect the capacity of biochars derived from AD fiber to adsorb H{sub 2}S from biogas. AD fiber was pyrolyzed in an electric tube reactor at temperatures up to 600 °C and 60 min. The chars were employed for H{sub 2}S scrubbing tests from a synthetic biogas. Results showed that the chars’ capacity for H{sub 2}S removal is comparable to that of activated carbon. An additional step consisting of impregnation of the chars with Na{sub 2}CO{sub 3} resulted in an improved capacity for H{sub 2}S removal. To study the effect of ash, the AD fiber was also subjected to an alternative thermal treatment, hot water extraction (HWE), at 200 °C for 60 min. The resulting HWE material showed no removal of H{sub 2}S from biogas, indicating that the ash and the environment employed for the thermal treatment of AD fiber play an important role in the char’s performance for H{sub 2}S removal. Results also suggest that a portion of the S in the charcoal after the H{sub 2}S sorption process exists as free or adsorbed S (i.e., not chemically bonded to the charcoal).

09 BIOMASS FUELS↗