Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The concentration and isotopic composition of hydrogen, carbon and nitrogen in carbonaceous meteorites

Stepwise pyrolysis was used to extract H2, N2 and C from powdered meteorites and from meteorite residues resulting from partial dissolution in aqueous HF or from reaction with HF-HCl solutions. Concentrations and isotopic compositions were determined for the cases of the carbonaceous chondrites Orgueil, Murray, Murchison, Renazzo and Cold Bokkeveld. Acidification of the meteorites removed the organic sources of H2, so that H2 in the HF-HCl acid residues came mostly from the insoluble organic matter making up 70-80% of the total carbon in carbonaceous meteorites. Good correlation is found between delta-D and the concentration of H2 in the acid residues, but no correlation exists between the delta-D, delta-C-13 and delta-N-15 in them. A model is proposed for both the high delta-D values and the relationship between those values and the H2 concentration.

Robert, F.↗
NASA NTRS1983

The Arecibo Observatory as an MST radar

The radars and other systems at the Arecibo Observatory were designed and built, originally, for incoherent-scatter and radio-astronomy research. More recently, important additions have been made for planetary radar and artificial RF heating of the ionosphere. Although designed and built for a different application, these systems have shown to be very powerful tools for tropospheric, stratospheric and mesospheric research. The Observatory at present has two main radars: one at 430 and the other at 2380 MHz. In addition, 50-MHz MST radar work has been done using portable transmitters brought to the Observatory for this purpose. This capability will become permanent with the recent acquisition of a transmitter at this frequency. Furthermore, control and data processing systems have been developed to use the powerful HF transmitter and antennas of the HF-heating facility as an HF bistatic radar. A brief description of the four radars available at the Observatory is presented.

Woodman, R. F.↗
NASA NTRS1986

Constitutive modeling for isotropic materials (HOST)

The results of the third year of work on a program which is part of the NASA Hot Section Technology program (HOST) are presented. The goals of this program are: (1) the development of unified constitutive models for rate dependent isotropic materials; and (2) the demonstration of the use of unified models in structural analyses of hot section components of gas turbine engines. The unified models selected for development and evaluation are those of Bodner-Partom and of Walker. A test procedure was developed for assisting the generation of a data base for the Bodner-Partom model using a relatively small number of specimens. This test procedure involved performing a tensile test at a temperature of interest that involves a succession of strain-rate changes. The results for B1900+Hf indicate that material constants related to hardening and thermal recovery can be obtained on the basis of such a procedure. Strain aging, thermal recovery, and unexpected material variations, however, preluded an accurate determination of the strain-rate sensitivity parameter is this exercise. The effects of casting grain size on the constitutive behavior of B1900+Hf were studied and no particular grain size effect was observed. A systematic procedure was also developed for determining the material constants in the Bodner-Partom model. Both the new test procedure and the method for determining material constants were applied to the alternate material, Mar-M247 . Test data including tensile, creep, cyclic and nonproportional biaxial (tension/torsion) loading were collected. Good correlations were obtained between the Bodner-Partom model and experiments. A literature survey was conducted to assess the effects of thermal history on the constitutive behavior of metals. Thermal history effects are expected to be present at temperature regimes where strain aging and change of microstructure are important. Possible modifications to the Bodner-Partom model to account for these effects are outlined. The use of a unified constitutive model for hot section component analyses was demonstrated by applying the Walker model and the MARC finite-element code to a B1900+Hf airfoil problem.

Chan, Kwai S.↗
NASA NTRS1989

Infrared aircraft measurements of stratospheric composition over Antarctica during September 1987

The Jet Propulsion Laboratory Mark IV interferometer recorded high-resolution, infrared solar spectra from the NASA DC-8 aircraft during flights over Antarctica in September 1987. The atmospheric absorption features in these spectra have been analyzed to determine the burdens of O3, NO, NO2, HNO3, ClNO3, HCl, HF, CO2, CH4, N2O, HCN, CO, H2O, CFCl3, and CF2Cl2. The results show a 'collar' of high HNO3 and ClNO3 surrounding a 'core' in which the burdens of these and of HCl and NO2 are very low. Clear increases in the burdens of HF and HNO3 were observed during the course of September in the vortex core. HCl and NO2 exhibited smaller, less significant increases. The burdens of the tropospheric source gases, N2O, CH4, HCN, CFCl3, CF2Cl2, CO, and H2O, were observed to be much smaller over Antarctica than at midlatitudes. This, together with the fact that HF over Antarctica was more than double its midlatidue value, suggests that downwelling had occurred.

Toon, G. C.↗
NASA NTRS1990

Airborne measurements of stratospheric constituents over the Arctic in the winter of 1989

A Fourier transform spectrometer aboard the NASA DC-8 aircraft was used during the Airborne Arctic Stratospheric Expedition (AASE) to record infrared absorption spectra of the polar stratosphere. From these high resolution spectra, vertical column amounts above flight altitude were derived of O3, CH4, N2O, H2O, HCl, HF, NO, NO2, ClONO2, and HNO3 for eleven flights poleward of 60 deg N. In this paper, measurements on the flight of January 26, 1989 were derived when the flight path during the observations crossed from outside the polar vortex to inside. This allowed a clear comparison of the conditions of the air within the vortex with that outside. Observations of passive tracers such as CH4 and HF indicate that air of a certain composition within the polar vortex occurs at lower altitude than air outside. Within the vortex, markedly reduced columns of HCl and NO2. The ratio of HCl to HF column dropped from its typical midlatitude value of 4.5 to as low as 1.7 within the vortex, implying that the HCl had been chemically or physically removed from the air in the vortex. In contrast to the Antarctic observations, HNO3 values were elevated within the vortex.

Mankin, William G.↗
NASA NTRS1990

Intercomparison of measurements of stratospheric hydrogen fluoride

Observations of the vertical profile of hydrogen fluoride (HF) vapor in the stratosphere and of the vertical column amounts of HF above certain altitudes were made using a variety of spectroscopic instruments in the 1982 and 1983 Balloon Intercomparison Campaigns. Both emission instruments working in the far-infrared spectral region and absorption instruments using solar occultation in the 2.5-micron region were employed. No systematic differences were seen in results from the two spectral regions. A mean profile from 20 - 45 km is presented, with uncertainties ranging from 20 to 50 percent. Total columns measured from ground and from 12 km are consistent with the profile if the mixing ratio for HF is small in the troposphere and low stratosphere.

Mankin, William G.↗
NASA NTRS1990

A study of microstructural characteristics of Ni-based superalloys at high temperatures

The microstructural characteristics of the Ni-based superalloy MAR-M245(Hf) which is used in manufacturing the components of the Space Shuttle main engine are studied. These superalloys need optimum heat treatment to get the best results. To find out the optimum heat treatment, the techniques of differential thermal analysis (DTA) and the optical photomicrographs were utilized. In the first phase, the existing experimental equipment like cutting, grinding/polishing machines and metallurgical microscope were set up to cut/polish and take the photomicrographs. In the beginning of the project a Perkin Elmer differential thermal analyzer DTA1700 along with a temperature programmed and the needed computer interface was procured and made operational. In the second year a Leitz Metallux-3 hot state research microscope was also procured and installed for in-situ observation of the superalloy samples. The hot stage when tested for the first time alloyed the thermocouple with the Tantalum heating element and has now been installed. Samples of MAR-M246(Hf), MAR-M247, Waspaloy, Udimet-41, CMSX-3, and CMSX-3 (Polycrystalline and single crystals) were studied using a differential thermal analyzer and the results are reported. Photomicrographs of the Ni-based superalloy MAR-M246 (Hf) were recorded before and after heat treatment at certain temperatures. More heat treatments need to be done before a final inference can be reached.

Lal, Ravindra B.↗
NASA NTRS1990

Natural chlorine and fluorine in the atmosphere, water and precipitation

The geochemical cycles of chlorine and fluorine are surveyed and summarized as framework for the understanding of the global natural abundances of these species in the atmosphere, water, and precipitation. In the cycles the fluxes into and out of the atmosphere can be balanced within the limits of our knowledge of the natural sources and sinks. Sea salt from the ocean surfaces represent the predominant portion of the source of chlorine. It is also an important source of atmospheric fluorine, but volcanoes are likely to be more important fluorine sources. Dry deposition of sea salt returns about 85 percent of the salt released there. Precipitation removes the remainder. Most of the sea salt materials are considered to be cyclic, moving through sea spray over the oceans and either directly back to the oceans or deposited dry and in precipitation on land, whence it runs off into rivers and streams and returns to the oceans. Most of the natural chlorine in the atmosphere is in the form of particulate chloride ion with lesser amounts as gaseous inorganic chloride and methyl chloride vapor. Fluorine is emitted from volcanoes primarily as HF. It is possible that HF may be released directly form the ocean surface but this has not been confirmed by observation. HCl and most likely HF gases are released into the atmosphere by sea salt aerosols. The mechanism for the release is likely to be the provision of protons from the so-called excess sulfate and HNO3. Sea salt aerosol contains fluorine as F(-), MgF(+), CaF(+), and NaF. The concentrations of the various species of chlorine and fluorine that characterize primarily natural, unpolluted atmospheres are summarized in tables and are discussed in relation to their fluxes through the geochemical cycle.

Friend, James P.↗
NASA NTRS1993

HALOE Antarctic observations in the spring of 1991

HALOE observations of O3, CH4, HF, H2O, NO, NO2, and HCl collected during the October 1991 Antarctic spring period are reported. The data show a constant CH4 mixing ratio of about 0.25 ppmv for the altitude range from 65 km down to about 25 km at the position of minimum wind speed in the vortex: i.e., the vortex center, and depressions in pressure versus longitude contours of NO, NO2, HF, and HCl in this same region. Water vapor, HF, and HCl enhancement are also observed in the vortex center region above about 25 km. Between 10 and 20 km, the expected mixing ratio signatures exist within the vortex, i.e., low ozone and dehydration. The water vapor increased by 50 percent, and the ozone level doubled inside the vortex between October 11 and 24 in the 15-20 km layer. These changes imply a time constant for recovery from ozone hole conditions of 19 and 30 days for O3 and H2O, respectively. The data further show the presence of air inside the vortex between 3 and 30 mb which has mixing ratios characteristic of midlatitudes.

Russell, James M., III↗
NASA NTRS1993

The Halogen Occultation Experiment

The Halogen Occultation Experiment (HALOE) uses solar occultation to measure vertical profiles of O3, HCl, HF, CH4, H2O, NO, NO2, aerosol extinction, and temperature versus pressure with an instantaneous vertical field of view of 1.6 km at the earth limb. Latitudinal coverage is from 80 deg S to 80 deg N over the course of 1 year and includes extensive observations of the Antarctic region during spring. The altitude range of the measurements extends from about 15 km to about 60-130 km, depending on channel. Experiment operations have been essentially flawless, and all performance criteria either meet or exceed specifications. Internal data consistency checks, comparisons with correlative measurements, and qualitative comparisons with 1985 atmospheric trace molecule spectroscopy (ATMOS) results are in good agreement. Examples of pressure versus latitude cross sections and a global orthographic projection for the September 21 to October 15, 1992, period show the utility of CH4, HF, and H2O as tracers, the occurrence of dehydration in the Antarctic lower stratosphere, the presence of the water vapor hygropause in the tropics, evidence of Antarctic air in the tropics, the influence of Hadley tropical upwelling, and the first global distribution of HCl, HF, and NO throughout the stratosphere. Nitric oxide measurements extend through the lower thermosphere.

Russell, James M., III↗
NASA NTRS1993

Spectroscopic ellipsometric characterization of Si/Si(1-x)Ge(x) strained-layer superlattices

Spectroscopic ellipsometry (SE) was employed to characterize Si/Si(1-x)Ge(x) strained-layer superlattices. An algorithm was developed, using the available optical constants measured at a number of fixed x values of Ge composition, to compute the dielectric function spectrum of Si(1-x)Ge(x) at an arbitrary x value in the spectral range 17 to 5.6 eV. The ellipsometrically determined superlattice thicknesses and alloy compositional fractions were in excellent agreement with results from high-resolution x ray diffraction studies. The silicon surfaces of the superlattices were subjected to a 9:1 HF cleaning prior to the SE measurements. The HF solution removed silicon oxides on the semiconductor surface, and terminated the Si surface with hydrogen-silicon bonds, which were monitored over a period of several weeks, after the HF cleaning, by SE measurements. An equivalent dielectric layer model was established to describe the hydrogen-terminated Si surface layer. The passivated Si surface remained unchanged for greater than 2 h, and very little surface oxidation took place even over 3 to 4 days.

Yao, H.↗
NASA NTRS1994

An overview of the Halogen Occultation Experiment (HALOE) and preliminary results

The Halogen Occultation Experiment (HALOE) experiment has observed vertical profiles and pressure versus latitude cross sections of temperature HCl, HF, CH4, H2O, NO, NO2, O3, and aerosols over the range from 80 deg S to 80 deg N. An in-orbit precision of better than 0.3 ppbv has been demonstrated for HCl, HF, NO, NO2 and less than 0.6 ppmv for the other channels. Comparisons with correlative measurements at this early stage are encouraging. Nitric oxide has been observed over the range from the upper troposphere to 130-km. Latitudinal cross sections of the long-lived tracers CH4 and HF show clear indications of the effect of the general circulation.

Russell, J. M., III↗
NASA NTRS1995

Coincident bursts of auroral kilometric radiation and VLF emissions associted with a type 3 solar radio noise event

This paper examines an isolated magnetospheric VLF/radio noise event that is highly suggestive of the triggering of terrestrial auroral kilometric radiation (AKR) bu solar type III radio emission and of a close relation between AKR and broadband hiss. The solar type III burst was measured on polar HF riometers and was coincident with local dayside VLF/LF noise emission bursts at South Pole station. It was also coincident with AKR bursts detected onthe AMPTE/IRM satellite, at the same magnetic local time as South Pole. On the basis of the close association of AKR and VLF bursts, and from geometric considerations relating to wave propagation, it is likely that the AKR source was on the dayside and on field lines near South Pole station. The general level of geomagnetic activity was very low. However, an isolated magnetic impulse event (MIE) accompanied by a riometer absorption pulse was in progress when all of the VLF/radio noise bursts occurred. The very close association of the typew III burst at HF with the AKR is consistent with external stimulation of the AKR, is different, more immediate,triggering process than that implied by Calvert (1981) is invoked. It is suggested here that some of the HF solar radiant energy may decay into waves with frequences comparable to those of the AKR by paraetric excitation or some other process, thus providing the few background photons required for the generation of AKR by the WU and Lee (1979) cyclotron maser instability. The AKR, perhaps by modifying the magnetospheric electron velocity distribution, might have produced the observed VLF emissions. Alternatively, the VLF emissions may have arisen from the same anisotropic and unstable electron distribution function responsible for the AKR.

Rosenberg, T. J.↗
NASA NTRS1995

Balloon-borne observations of mid-latitude hydrofluoric acid

Measurements of stratospheric hydrofluoric acid (HF) have been made by the JPL MkIV interferometer during high-altitude balloon flights. Infrared solar absorption spectra were acquired near 35 deg N at altitudes between local tropopause and 38 km. Volume mixing ratio profiles of HF derived from 4 flights (1990-93), in conjunction with simultaneously observed N2O profiles, indicate an average rate of HF increase of (5.5 +/- 0.3)% per year, in agreement with time-dependent, two-dimensional model simulations (6% per year) and ATMOS measurements.

Sen, B.↗
NASA NTRS1999

Cyclic Oxidation of Single-Crystal NiAl-X Alloys

Several single-crystal NiAl-X alloys (X = Hf, Ti, Cr, Ga) were cyclically oxidized at 1000 C for up to 1000 1-hr cycles. The alloys all showed protective, adherent alpha-Al2O3 scale formation with positive weight change behavior throughout the test. There was no clear correlation between the composition of the various alloys and the specific weight gain although the ranking by weight change was relatively consistent for two duplicate series of samples. The presence of Hf (0.5 - 0.8 at.%) resulted in the internal formation of Al2O3/HfO2 "stringers." Diffusion of Hf to the growing oxide stringers resulted in the development of a near-surface layer depleted of these precipitates.

Nesbitt, James A.↗
NASA NTRS2002

Lunar Radar Cross Section at Low Frequency

Recent bistatic measurements of the lunar radar cross-section have extended the spectrum to long radio wavelength. We have utilized the HF Active Auroral Research Program (HAARP) radar facility near Gakona, Alaska to transmit high power pulses at 8.075 MHz to the Moon; the echo pulses were received onboard the NASA/WIND spacecraft by the WAVES HF receiver. This lunar radar experiment follows our previous use of earth-based HF radar with satellites to conduct space experiments. The spacecraft was approaching the Moon for a scheduled orbit perturbation when our experiment of 13 September 2001 was conducted. During the two-hour experiment, the radial distance of the satellite from the Moon varied from 28 to 24 Rm, where Rm is in lunar radii.

Rodriguez, P.↗
NASA NTRS2002

Theoretical Study of Decomposition Pathways for HArF and HKrF

To provide theoretical insights into the stability and dynamics of the new rare gas compounds HArF and HKrF, reaction paths for decomposition processes HRgF to Rg + HF and HRgF to H + Rg + F (Rg = Ar, Kr) are calculated using ab initio electronic structure methods. The bending channels, HRgF to Rg + HF, are described by single-configurational MP2 and CCSD(T) electronic structure methods, while the linear decomposition paths, HRgF to H + Rg + F, require the use of multi-configurational wave functions that include dynamic correlation and are size extensive. HArF and HKrF molecules are found to be energetically stable with respect to atomic dissociation products (H + Rg + F) and separated by substantial energy barriers from Rg + HF products, which ensure their kinetic stability. The results are compatible with experimental data on these systems.

Chaban, Galina M.↗
NASA NTRS2002

Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

Diorio, Kimberly A.↗