SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
I consider an exact model of atomic spontaneous dipole emission and classical dipole radiation in a finite photonic band-gap structure.
A commercial Zr-V-Fe alloy (i.e., SAES Getters trade name alloy St-172) has been assessed as reversible hydrogen storage material for use in actuators of gas gap heat switches. Two prototype actuators containing the SAES St-172 material were built and operated for several thousand cycles to evaluate performance of the metal hydride system under conditions simulating heat switch operation.
We present the general principles of gas gap heat switches that impact their performances for the Planck cryocooler, develop two figures of merit relevant to this application, and present initial characterization results of switches using uranium or ZrNi as the hydriding material.
The Mars Program Planning Group (MPPG) was an agency wide effort, chartered in March 2012 by the NASA Associate Administrator for Science, in collaboration with NASA's Associate Administrator for Human Exploration and Operations, the Chief Scientist, and the Chief Technologist. NASA tasked the MPPG to develop foundations for a program-level architecture for robotic exploration of Mars that is consistent with the President's challenge of sending humans to the Mars system in the decade of the 2030s and responsive to the primary scientific goals of the 2011 NRC Decadal Survey for Planetary Science. The Mars Exploration Program Analysis Group (MEPAG) also sponsored a Precursor measurement Strategy Analysis Group (P-SAG) to revisit prior assessments of required precursor measurements for the human exploration of Mars. This paper will discuss the key results of the MPPG and P-SAG efforts to update and refine our understanding of the Strategic Knowledge Gaps (SKGs) required to successfully conduct human Mars missions.
We present the current state of development in passive gas-gap heat switches. This type of switch does not require a separate heater to activate heat transfer but, instead, relies upon the warming of one end due to an intrinsic step in a thermodynamic cycle to raise a getter above a threshold temperature. Above this temperature sequestered gas is released to couple both sides of the switch. This enhances the thermodynamic efficiency of the system and reduces the complexity of the control system. Various gas mixtures and getter configurations will be presented.
A network was derived that accurately accounts for large gap discontinuties (with respect to a wavelength) without sufering from the limitations of available numeric techniques.
We discuss a simple ID model of the modification of Planck blackbody radiation by photonic band-gap materials (PBGs).
Airframe noise is an important issue during the approach and landing phases of flight because engines are throttled back, and airframe sources become an equal or greater contributor to environmental noise. The leading-edge slat component of the high-lift system for transport aircraft has been identified as a prominent source of airframe noise. Noise production mechanisms and potential treatments to mitigate airframe noise have been areas of active research for nearly three decades. Two promising technologies for slat noise reduction are the slat-gap filler (SGF) and slat-cove filler (SCF). Previous work was done using a 2D section of a transport class aircraft wing to demonstrate their feasibility via benchtop and computational models. A wind tunnel test campaign was recently undertaken to test the SGF and SCF technologies in a flight-like environment by installing dynamically scaled treatments on the 10%-scale High-Lift Common Research Model (CRM-HL), which is representative of a commercial twin-aisle transport aircraft. Advancement of the SGF and SCF technologies to overcome challenges of integration with 3D airframe structures, computational simulations of the CRM-HL predicting the aerodynamic and aeroacoustic performance and structural loads, and design of wind tunnel model hardware with features accommodating noise treatments were conducted in parallel. Details of innovations in the SGF and SCF technologies for 3D airframe feasibility will be described. The loads the treatments must sustain in flight and the influence of those loads on the design is also discussed. Finally, the design of wing leading-edge assemblies to treat the 10% CRM-HL with dynamically scaled SGF and SCF components is presented. The treatments were successfully tested in 2020/2021 providing a demonstration of leading-edge noise reduction using components that would allow slat articulation.
Understanding how the Sun, Earth, and other objects in the solar system interact with the space radiation environment is crucial for improving activities of humans on Earth and in space. Low-power, low-noise, multidirectional robust detectors for detecting ions with a wide range of mass and energies will provide a more complete understanding of space environment physics. To meet these challenges, new ion detectors based on wide band gap (WBG) semiconductors are being developed for integration on a variety of deep space platforms. NASA Glenn Research Center (GRC) is applying its expertise and facilities in harsh environment instrumentation to develop supporting technologies to enable improved instruments for space science missions. New detector technologies being developed at GRC include SiC solid-state devices as practical robust, thermally stable large area detectors for LET measurements in compact, stacked charged particle telescope. The low-noise, thermally stable nature of the WBG detectors allows a small multidirectional array of charged particle telescopes to be packed in a 6U CubeSat without active cooling for operation in lunar orbit or deep space. Using a full variety of different WBG detectors, an extremely compact instrument to provide multi-directional, comprehensive (composition, velocity, and direction) in-situ measurements of heavy ions in space plasma environments can be realized.
Potential gaps between powered-flight slosh and near-zero-gee slosh modeling intuition ... - Extremely-basic items like inertia (which is a strong function of frequency and liquid depth) - Visualization of response – ability to form a physical picture via mechanical analog - Availability of frequency-domain design insight from open-loop plant - Sense for edge-of model-validity – how does it behave “at the edges” And some suggestions on how NASA can help
A typical aircraft certification process consists of obtaining a type, production, airworthiness, and continued airworthiness certificates. During this process, a type certification plan is created that includes the intended regulatory operating environment, the proposed certification basis, means of compliance, and a list of documentation to show compliance. Earlier work by the authors demonstrated a model-based framework for the management of these certification artifacts for normal category airplanes. Presently, it is expanded and adapted to consider certification for transport category airplanes regulated under 14 CFR Part 25, providing clear transparency and traceability between the text of the regulations and imposed requirements, contextual information, and specified test activities. In particular, a capability to identify potential gaps in the applicability of regulations for novel architectures such as electrified aircraft is proposed. This capability, based on mismatches between the functional intent and the corresponding prescribed physical implementation, is developed. A sample implementation of the proposed capability is presented for a notional electrified powertrain aircraft architecture.
Combustion processes and flame propagation in spark ignited internal combustion engine - ionization gap study.
Gapped toroid magnetically coupled to a delay line provides continuous adjustment of the time delay line signal retrieval. A rotating screw moves the toroid pickup parallel to the delay line. This device can be used in signal detection devices and instrumentation equipment.
RF shielding gap between an RF cable and a multipin connector is eliminated by a sleeve assembly installed between the connector and the terminated portion of the shielding. The assembly is enclosed in a heat-shrinkable plastic sleeve which completes the continuous RF shield.
Narrow-gap welding procedures for joining thick gauge aluminum alloy plate
Energy transfer to electrodes in pulse discharge with small gaps
Development and flight test of inflatable disk- gap-band parachute for high altitude deployment from sounding rockets
Energy gap of clean superconducting thin films of tin in both parallel and perpendicular magnetic fields, using one-dimensional solution of Ginzburg-Landau equation