Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fluorination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Secondary electron emission from electrically charged fluorinated-ethylene-propylene Teflon for normal and non-normal electron incidence

The secondary electron emission coefficient was measured for a charged polymer (FEP-Teflon) with normally and obliquely incident primary electrons. Theories of secondary emission are reviewed and the experimental data is compared to these theories. Results were obtained for angles of incidence up to 60 deg in normal electric fields of 1500 V/mm. Additional measurements in the range from 50 to 70 deg were made in regions where the normal and tangential fields were approximately equal. The initial input angles and measured output point of the electron beam could be analyzed with computer simulations in order to determine the field within the chamber. When the field is known, the trajectories can be calculated for impacting electrons having various energies and angles of incidence. There was close agreement between the experimental results and the commonly assumed theoretical model in the presence of normal electric fields for angles of incidence up to 60 deg. High angle results obtained in the presence of tangential electric fields did not agree with the theoretical models.

Budd, P. A.↗
NASA NTRS1981

Development of Improved Rhenium Coatings for Fluorine Engine Thrust Chambers

Coating trials were undertaken to evaluate the application of rhenium to carbon-carbon composite sheet by plasma spraying. Optimum spray parameters and coating thickness were identified for production of coatings free from continuous defects and with adequate adherence to the substrate. A tungsten underlayer was not beneficial and possibly detracted from coating integrity. Stress calculations indicated that the proposed operating cycle of the rocket engine would not cause spalling of the rhenium coating. Calculations indicated that permeation of gases through the coating would not be significant during the expected life of the thrust chamber. The feasibility of applying rhenium coatings by laser melting was also studied. Poor wetting of the composite surface by the liquid rhenium precluded production of uniform coatings. Borate/carborate fluxes did not improve wetting characteristics.

Barton, K. J.↗
NASA NTRS1981

The detection of interstellar fluorine in the line of sight toward Delta Scorpii

The resonance line of F I at 954.825 A is detected in the interstellar spectra of Delta Sco, and possibly Delta Ori, and upper limits are obtained toward five other stars. It is noted that the equivalent width for Delta Sco of 10.9(+4.5, -3.1) in milliangstroms corresponds to a column density of 1.52(+0.60, -0.43) x 10 to the 13th/sq cm and a depletion of -0.53(+0.15, -0.14) dex. For the other lines of sight, depletions of at least 0.1-0.5 dex are inferred. The results are discussed in the context of current theories of the depletion process.

Snow, T. P., Jr.↗
NASA NTRS1982

Tribological evaluation of composite materials made from a partially fluorinated polyimide

Preliminary tribological studies on a new polyimide formulated from the diamine 2,2-bis 4-(4-aminophenoxy) phenyl hexafluoropane (4-BDAF) indicates polyimides made from this diamine have excellent potential for high temperature applications. Two different polyimides were formulated from the diamine, and five different composites were formulated using one of the polyimides. Composites were made using 10 weight percent (w/o) graphite fluoride powder, 20 w/o PTFE powder, 30 w/o silver powder, or 50 w/o carbon fibers, both graphitic and nongraphitic types. The powder additions did not improve the tribological properties as much as the carbon fibers, and the graphitic fibers produced better results than did the nongraphitic fibers. Results also indicated that improved high temperature stability and tribological properties may be obtained with a polyimide made from the dianhydride pyromellitic acid (PMDA) rather than the dianhydride benzophenonetetracarboxylic acid (BTDA).

Fusaro, R. L.↗
NASA NTRS1983

Polyimides formulated from a partially fluorinated diamine for aerospace tribological applications

Preliminary tribological studies on polyimides formulated from the diamine 2,2-bis 4-(4-aminophenoxy)phenyl hexafluorapane (4-BDAF) indicate that polyimides formulated from this diamine have excellent potential for high temperature tribological applications. The dianhydrides used to make the polyimides were pyromellitic (PMDA) and benzophenonetetracarboxylic acid (BTDA). Friction and wear studies at 25 and 200 C indicate that polyimides formulated using 50 mole percent of the PMDA dianhydride and 50 mole percent of the BTDA dianhydride perform better than polyimides formulated solely with the BTDA dianhydride. Graphite fiber reinforced polyimide composites were formulated with the polyimide made from the BTDA dianhydride, both graphitic and non-graphitic fibers were evaluated. Graphitic fibers produced better tribological results, since thin, flowing, "layer-like' transfer films were produced which did not build-up with long sliding durations. Non-graphitic fibers did not produce this type of transfer.

Fusaro, R. L.↗
NASA NTRS1984

Low wear partially fluorinated polyimides

Tribological studies were conducted on five different polyimide solid bodies formulated from the diamine 2,2-bis 4-(4-aminophenoxy)phenyl hexafluoropropane (4-BDAF) and the dianhydrides pyromellitic acid (PMDS) and benzophenonetetracarboxylic acid (BTDA). The following polyimides were evaluated 4-BDAF/PMDA, 4-BDAF/BTDA, 4-BDAF/80 mole percent PMDA, 20 mole percent BTDA, 4-BDAF/60 mole percent BTDA. Friction coefficients, polyimide wear rates, polyimide surface morphology and transfer films were evaluated at sliding speeds of 0.31 to 11.6 m/s and at temperatures of 25 C to 300 C. The results indicate that the tribological properties are highly dependent on the composition of the polyimide and on the experimental conditions. Two polyimides were found which produced very low wear rates but very high friction coefficients (greater than 0.85) under ambient conditions. They offer considerable potential for high traction types of application such as brakes.

Fusaro, R. L.↗
NASA NTRS1984

Polyimides formulated from a partially fluorinated diamine for aerospace tribological applications

Preliminary pribological studies on polyimides formulated from the diamine 2,2-bis 4-(4-aminophenoxy)phenyl hexafluoropane (4-BDAF) indicate that polyimides formulated from this diamine have excellent potential for high temperature tribological applications. The dianhydrides used to make the polyimides were pyromellitic (PMDA) and benzophenonetetracarboxylic acid (BTDA). Friction and wear studies at 25 and 200 C indicate that polyimides formulated using 50 mole percent of the PMDA dianhydride and 50 mole percent of the BTDA dianhydride perform better than polyimides formulated solely with the BTDA dianhydride. Graphite fiber reinforced polyimide composites were formulated with the polyimide made from the BTDA dianhydride and both graphitic and non-graphitic fibers were evaluated. Graphitic fibers produced better tribological results, since thin, flowing, 'layer-like' transfer films were produced which did not build up with long sliding durations. Non-graphitic fibers did not produce this type of transfer. Previously announced in STAR as N83-22423

Fusaro, R. L.↗
NASA NTRS1985

Low-wear partially fluorinated polyimides

Tribological studies were conducted on five different polyimide solid bodies formulated from the diamine 2,2-bis 4-(4-aminophenoxy)pgenyl hexafluoropropane (4-BDAF) and the dianhydrides pyromellitic acid (PMDS) and benzophenonetetracarboxylic acid (BTDA). The following polyimides were evaluated 4-BDAF/PMDA, 4-BDAF/BTDA, 4-BDAF/80 mole percent PMDA, 20 mole percent BTDA, 4-BDAF/60 mole percent BTDA. Friction coefficients, polyimide wear rates, polyimide surface morphology and transfer films were evaluated at sliding speeds of 0.31 to 11.6 m/s and at temperatures of 25 C to 300 C. The results indicate that the tribological properties are highly dependent on the composition of the polyimide and on the experimental conditions. Two polyimides were found which produced very low wear rates but very high friction coefficients (greater than 0.85) under ambient conditions. They offer considerable potential for high traction types of application such as brakes.

Fusaro, R. L.↗
NASA NTRS1986

Evaluation of a storable fluorine based pilot for scramjets

An ignitor/pilot device for scramjet engines has been tested with C2H4, C2H6, and CH4 gaseous hydrocarbon fuels at Mach 2. The pilot was designed to operate with storable nontoxic propellants rather than hazardous pyrophorics; the pilot fluid is a mixture of ethylene, oxygen, and sulfur hexafluoride. The pilot reduced the minimum temperature at which all three hydrocarbon fuels ignited; a comparison was then conducted between combustion efficiency calculations for these test results and those of pilots using nitrogen in place of sulfur hexafluoride, and using silane-hydrogen (yielding equivalent energy). The nitrogen-substituted pilot exhibited the highest efficiency.

Diskin, G. S.↗
NASA NTRS1990

Experience with synthetic fluorinated fluid lubricants

Since the late 1970's, the wet lubricant of choice for space mechanisms has been one of the family of synthetic perfluoro polyalkylether (PFPE) compounds, namely Fomblin Z-25 (Bray-815Z) or DuPont's Krytox 143xx series. While offering the advantages of extremely low vapor pressures and wide temperature ranges, these oils and derived greases have a complex chemistry compared to the more familiar natural and synthetic hydrocarbons. Many aerospace companies have conducted test programs to characterize the behavior of these compounds in a space environment, resulting in a large body of hard knowledge as well as considerable space lore concerning the suitability of the lubricants for particular applications and techniques for successful application. The facts are summarized and a few myths about the compounds are dispelled, and some performance guidelines for the mechanism design engineer are provided.

Conley, Peter L.↗
NASA NTRS1992

The 1985 chlorine and fluorine inventories in the stratosphere based on ATMOS observations at 30 deg North latitude

Results are presented of an investigation of the Cl and F inventories derived from the concentrations of eleven Cl- and F-bearing organic and inorganic species throughout the atmosphere, based on observations with the Atmospheric Trace Molecule Spectroscopy instrument aboard the Space Shuttle during the Spacelab 3 mission of April 29 to May 6, 1985. It was found that, in April-May 1985, near 30 deg N, the mean total stratospheric concentrations of Cl and F were 2.58 +/-0.10 ppbv and 1.15 +/-0.12 ppbv, respectively. Partitioning among the source, sink, and reservoir species was consistent with the conservation of the F and Cl budgets throughout the stratosphere. It is shown that the budgets of Cl and F above about 45 km altitude can be determined accurately by measuring only HCl, HF, and CF4 and provide a straightforward timely reference point for future inventories and trends evaluations.

Zander, R.↗