Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Five Factor Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

INVESTIGATION OF THE PUZZLING ABUNDANCE PATTERN IN THE STARS OF THE FORNAX DWARF SPHEROIDAL GALAXY

Many works have found unusual characteristics of elemental abundances in nearby dwarf galaxies. This implies that there is a key factor of galactic evolution that is different from that of the Milky Way (MW). The chemical abundances of the stars in the Fornax dwarf spheroidal galaxy (Fornax dSph) provide excellent information for setting constraints on the models of galactic chemical evolution. In this work, adopting the five-component approach, we fit the abundances of the Fornax dSph stars, including {alpha} elements, iron group elements, and neutron-capture elements. For most sample stars, the relative contributions from the various processes to the elemental abundances are not usually in the MW proportions. We find that the contributions from massive stars to the primary {alpha} elements and iron group elements increase monotonically with increasing [Fe/H]. This means that the effect of the galactic wind is not strong enough to halt star formation and the contributions from the massive stars to {alpha} elements did not halt for [Fe/H] {approx}< -0.5. The average contribution ratios of various processes between the dSph stars and the MW stars monotonically decrease with increasing progenitor mass. This is important evidence of a bottom-heavy initial mass function (IMF) for the Fornax dSph, compared to the MW. Considering a bottom-heavy IMF for the dSph, the observed relations of [{alpha}/Fe] versus [Fe/H], [iron group/Fe] versus [Fe/H], and [neutron-capture/Fe] versus [Fe/H] for the dSph stars can be explained.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurements of striae in CR+ doped YAG laser crystals

Striations in Czochralski (CZ) grown crystals have been observed in materials such as GaAs, silicon, photorefractive crystals used for data storage, potassium titanyl phosphate crystals and LiNbO3. Several techniques have been used for investigating these defects including electron microscopy, laser scanning tomography, selective photoetching, X-ray diffuse scattering, interference orthoscopy, laser interferometry and micro-Fourier transform infrared spectroscopy mapping. A 2mm thick sample of the material to be investigated is illuminated with light that is absorbed and non-absorbed by the ion concentration to be observed. The back surface of the sample is focused onto a solid-state image detector and images of the input beam and absorbed (and diffracted) beams are captured at two wavelengths. The variation of the coefficient of absorption asa function of distance on the sample can be derived from these measurements. A Big Sky Software Beamcode system is used to capture and display images. Software has been written to convert the Beamcode data files to a format that can be imported into a spreadsheet program such as Quatro Pro. The spreadsheet is then used to manipulate and display data. A model of the intensity map of the striae collected by the imaging system has been proposed and a data analysis procedure derived. From this, the variability of the attenuation coefficient alpha can be generated. Preliminary results show that alpha may vary by a factor of four or five over distances of 100 mu m. Potential errors and problems have been discovered and additional experiments and improvements to the experimental setup are in progress and we must now show that the measurement techniques and data analysis procedures provide 'real' information. Striae are clearly visible at all wavelengths including white light. Their basic spatial frequency does not change radically, at least when changing from blue to green to white light. Further experimental and theoretical work can be done to improve the data collection techniques and to verify the data analysis procedures.

Cady, Fredrick M.↗

Integration of Reference Frames Using VLBI

Very Long Baseline Interferometry (VLBI) has the unique potential to integrate the terrestrial and celestial reference frames through simultaneous estimation of positions and velocities of approx. 40 active VLBI stations and a similar number of stations/sites with sufficient historical data, the position and position stability of approx. 150 well-observed extragalactic radio sources and another approx. 500 sources distributed fairly uniformly on the sky, and the time series of the five parameters that specify the relative orientation of the two frames. The full realization of this potential is limited by a number of factors including the temporal and spatial distribution of the stations, uneven distribution of observations over the sources and the sky, variations in source structure, modeling of the solid/fluid Earth and troposphere, logistical restrictions on the daily observing network size, and differing strategies for optimizing analysis for TRF, for CRF and for EOP. The current status of separately optimized and integrated VLBI analysis will be discussed.

Ma, Chopo↗

Under-Prediction of Localized Tally Uncertainties in Monte Carlo Eigenvalue Calculations

Modeling and simulation using Monte Carlo methods is widely used in nuclear reactor criticality benchmarking applications. However, obtaining good statistics not only takes a large amount of computational time, but it has been shown that localized tally uncertainties may be under-predicted by a factor of five or more in select cases. The primary components of this under-prediction include poor sampling due to improper source convergence and cycle-to-cycle correlations in the fission source. Additional components relate to the flux shape and the size of the tally cells. These issues must be understood and dealt with in order to support the practical use of modern Monte Carlo software packages.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

OBSERVATIONS AND MODELING OF NORTH-SOUTH ASYMMETRIES USING A FLUX TRANSPORT DYNAMO

The peculiar behavior of solar cycle 23 and its prolonged minima has been one of the most studied problems over the past few years. In the present paper, we study the asymmetries in active region magnetic flux in the northern and southern hemispheres during the complete solar cycle 23 and the rising phase of solar cycle 24. During the declining phase of solar cycle 23, we find that the magnetic flux in the southern hemisphere is about 10 times stronger than that in the northern hemisphere; however, during the rising phase of cycle 24, this trend is reversed. The magnetic flux becomes about a factor of four stronger in the northern hemisphere than in the southern hemisphere. Additionally, we find that there was a significant delay (about five months) in change of the polarity in the southern hemisphere in comparison with the northern hemisphere. These results provide us with hints of how the toroidal fluxes have contributed to the solar dynamo during the prolonged minima in solar cycle 23 and in the rising phase of solar cycle 24. Using a solar flux-transport dynamo model, we demonstrate that persistently stronger sunspot cycles in one hemisphere could be caused by the effect of greater inflows into active region belts in that hemisphere. Observations indicate that greater inflows are associated with stronger activity. Some other change or difference in meridional circulation between hemispheres could cause the weaker hemisphere to become the stronger one.

79 ASTRONOMY AND ASTROPHYSICS↗

A simple theoretical analysis of the pyrolysis of an isothermal particle of coal

The pyrolysis of particles of coal (or biomass), small enough for internal conduction of heat not to be a controlling factor, is considered. Altogether five dimensionless groups are identified as characterising both the rates of pyrolysis and the change in temperature of these small isothermal particles. A sensitivity analysis demonstrates that three dimensionless groups easily have most influence on the kinetics of pyrolysis. This enables a simple mathematical model to be formulated, but assuming that only one reaction for thermal decomposition occurs at a time. The heat of devolatilisation is not ignored. It is found that, if the temperature around such a pyrolysing particle exceeds a threshold value, external heat transfer controls the rate of pyrolysis. In fact, whether there is kinetic or external heat transfer control is mainly determined by the two dimensionless groups 3Nuk{sub l},{sub 8} /2A{rho}{sub c,o} anti Cr{sub o}{sup 2} (a modification of the ratio of the characteristic times for chemical reaction and a coal particle to heat up) and RT{sub 8}/E{sub v}. Thus, for kinetic control RT{sub 8}/E{sub v} must be smaller than a critical value, i.e.E{sub v} has to exceed a threshold value. The third important group, R{delta}H{sub v}/ anti CE{sub v} has less influence. Under kinetic control, a particle's temperature is close to the ambient temperature and consequently does not change during thermal decomposition, whereas, when external heat transfer controls, the particle's temperature can rise during pyrolysis by up to 100 K. The mean value of the activation energy for the devolatilisation of many coals is deduced to be {approx}240 kJ/mol, i.e. higher than many measured values, which appear to have been obtained, when heat transfer controlled the rate. The temperature during pyrolysis of these ''thermally thin particles'' is not altered significantly by fragmentation, swelling or a change of shape. (author)

01 COAL, LIGNITE, AND PEAT↗

Long path-length experimental studies of longitudinal phenomena in intense beams

Intense charged particle beams are nonneutral plasmas as they can support a host of plasma waves and instabilities. The longitudinal physics, for a long beam, can often be reasonably described by a 1-D cold-fluid model with a geometry factor to account for the transverse effects. The plasma physics of such beams has been extensively studied theoretically and computationally for decades, but until recently, the only experimental measurements were carried out on relatively short linacs. This work reviews experimental studies over the past five years on the University of Maryland Electron Ring, investigating longitudinal phenomena over time scales of thousands of plasma periods, illustrating good agreement with simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Precision orbit determination for Topex

The ability of radar altimeters to measure the distance from a satellite to the ocean surface with a precision of the order of 2 cm imposes unique requirements for the orbit determination accuracy. The orbit accuracy requirements will be especially demanding for the joint NASA/CNES Ocean Topography Experiment (Topex/Poseidon). For this mission, a radial orbit accuracy of 13 centimeters will be required for a mission period of three to five years. This is an order of magnitude improvement in the accuracy achieved during any previous satellite mission. This investigation considers the factors which limit the orbit accuracy for the Topex mission. Particular error sources which are considered include the geopotential, the radiation pressure and the atmospheric drag model.

Tapley, B. D.↗

The z ∼ 1.03 Merging Cluster SPT-CL J0356–5337: New Strong Lensing Analysis with HST and MUSE

We present a strong lensing analysis and reconstruct the mass distribution of SPT-CL J0356−5337, a galaxy cluster at redshift z = 1.034. Our model supersedes previous models by making use of new multiband Hubble Space Telescope data and Multi-Unit Spectroscopic Explorer (MUSE) spectroscopy. We identify two additional lensed galaxies to inform a more well-constrained model using 12 sets of multiple images in five separate lensed sources. The three previously known sources were spectroscopically confirmed by G. Mahler et al. at redshifts of z = 2.363, z = 2.364, and z = 3.048. We measured the spectroscopic redshifts of two of the newly discovered arcs using MUSE data, at z = 3.0205 and z = 5.3288. We increase the number of cluster member galaxies by a factor of 3 compared to previous work. We also report the detection of extended Lyα emission from several background galaxies. We measure the total projected mass density of the two major subcluster components, one dominated by the brightest cluster galaxy and the other by a compact group of luminous red galaxies. We find ${M}_{{\rm{B}}{\rm{C}}{\rm{G}}}(\lt 80\,\rm{kpc})=3.9{3}_{-0.14}^{+0.21}\times 1{0}^{13}$ M⊙ and ${M}_{{\rm{LRG}}}(\lt 80\,\rm{kpc})=2.9{2}_{-0.23}^{+0.16}\times 1{0}^{13}$ M⊙, yielding a mass ratio of $1.3{5}_{-0.08}^{+0.16}$ . The strong lensing constraints offer a robust estimate of the projected mass density regardless of modeling assumptions; allowing more substructure in this line of sight does not change the results or conclusions. Our results corroborate the conclusion that SPT-CL J0356−5337 is dominated by two mass components and is likely undergoing a major merger on the plane of the sky.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparing plant litter molecular diversity assessed from proximate analysis and 13 C NMR spectroscopy

Accurate representation of the chemical diversity of litter in ecosystem-scale models is critical for improving predictions of decomposition rates and stabilization of plant material into soil organic matter. In this contribution, we conducted a systematic review to evaluate how conventional characterization of plant litter quality using proximate analysis compares with molecular-scale characterization using 13 C NMR spectroscopy. Using a molecular mixing model, we converted chemical shift regions from NMR into fractions of carbon (C) in five organic compound classes that are major constituents of plant material: carbohydrates, proteins, lignins, lipids, and carbonylic compounds. We found positive correlations between the acid soluble fraction and carbohydrates, and between the acid insoluble fraction and lignins. However, the acid-soluble fraction underestimated carbohydrates, and the acid insoluble fraction overestimated lignins by 243%. We identified two sources of uncertainties: i) disparities between litter chemical composition based on hydrolysability and actual chemical composition obtained from NMR and ii) conversion factors to translate proximate fractions into organic constituents. Both uncertainties are critical, potentially leading to misinterpretations of decay rates in litter decomposition models. Consequently, we recommend including explicit substrate chemistry data in the next generation of litter decomposition models.

59 BASIC BIOLOGICAL SCIENCES↗

Feshbach-resonant Raman photoassociation in a Bose-Einstein condensate

We model the formation of stable heteronuclear molecules via pulsed Raman photoassociation of a two-component Bose-Einstein condensate near a strong Feshbach resonance, for both counterintuitive and intuitive pulse sequencing. Compared to lasers alone, weak Raman photoassociation is enhanced by as much as a factor of ten (five) for a counterintuitive (intuitive) pulse sequence, whereas strong Raman photoassociation is barely enhanced at all--regardless of pulse sequence. Stronger intra-atom, molecule, or atom-molecule collisions lead to an expected decrease in conversion efficiency, but stronger ambient inter-atom collisions lead to an unexpected increase in the efficiency of stable molecule production. Numerical results agree reasonably with an analytical approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scattering functions of Platonic solids

The single-particle small-angle scattering properties of five Platonic solids, including the tetrahedron, hexahedron, octahedron, dodecahedron and icosahedron, are systematically investigated. For each given geometry, the Debye spatial autocorrelation function, pair distance distribution function and intraparticle structure factor (form factor) are calculated and compared with the corresponding scattering function of a spherical reference system. From the theoretical models, the empirical relationship between the dodecahedral and icosahedral structural characteristics and those of the equivalent spheres is found. Moreover, the single-particle scattering properties of icosahedral and spherical shells with identical volume are investigated, and the prospect of using different data analysis approaches to explore their structural differences is presented and discussed.

36 MATERIALS SCIENCE↗

Ultra-High Vacuum Outgassing Characterization of Thermally Processed Low-Carbon Steel for Advanced Particle Accelerator and Gravitational Wave Detector Applications

This dissertation investigated AISI 1020 low-carbon steel as an alternative vacuum chamber material to conventional stainless steel for ultra-high vacuum (UHV) and extreme-high vacuum (XHV) applications. After a 400 °C/48 h bake, AISI 1020 tube chambers achieved a hydrogen outgassing rate of 2.4 × 10¿¹6 Torr·L·s¿¹·cm¿², approximately 2,300 times lower than the prebaked 316L stainless-steel comparator, among the lowest hydrogen outgassing rates ever reported for an uncoated metallic vacuum chamber. Bare and magnetite-coated AISI 1020 chambers were then compared using throughput and rate-of-rise methods. The magnetite coating yielded 5× lower water outgassing at room temperature, but this advantage disappeared after 80 °C baking. After full thermal conditioning (400 °C/48 h prebake followed by 150 °C/96 h and 200 °C/110 h), bare steel achieved 25× lower hydrogen outgassing than the magnetite-coated chamber (9.6 × 10¿¹6 Torr·L·s¿¹·cm¿²) and >99% H2 purity with carbon species below RGA detection. Monte Carlo molecular flow simulations of a CEBAF photogun beamline (96 scenarios) showed that replacing 304L stainless steel with AISI 1020 reduces equilibrium H2 pressure by a factor of 833; a single 304L electrode contributes 98.8% of the gas load despite occupying only 9.1% of the internal surface area. A 500-m Einstein Telescope beampipe screening showed that corrugated bellows contribute 18% of the gas load from only 0.7% of the surface area. A five-model adsorption isotherm framework applied to 22 pumpdown datasets (164 fits with AR(1)-GLS correction) established that the experimental protocol, not the material, controls isotherm identifiability: Dubinin–Radushkevich wins isothermal pipe pumpdowns; Langmuir wins thermally dominated chamber bakes. Cross-dataset joint fitting of the AISI 1020 pipe pumpdowns yielded an H2 diffusion activation energy Ed = 7.24 ± 1.28 kcal·mol¿¹, consistent with trap dominated diffusion in commercial low-carbon steels. Two companion innovations were developed: a Variable Conductance Device (VCD, patent pending IDF-00723) for XHV outgassing measurement, and VacuumDesignerPro (VDP), a MATLAB-based design tool validated against LIGO benchmarks.

Al-Allaq, Aiman H [Old Dominion University]↗

Experimental philosophy leading to a small scale digital data base of the conterminous United States for designing experiments with remotely sensed data

Research using satellite remotely sensed data, even within any single scientific discipline, often lacked a unifying principle or strategy with which to plan or integrate studies conducted over an area so large that exhaustive examination is infeasible, e.g., the U.S.A. However, such a series of studies would seem to be at the heart of what makes satellite remote sensing unique, that is the ability to select for study from among remotely sensed data sets distributed widely over the U.S., over time, where the resources do not exist to examine all of them. Using this philosophical underpinning and the concept of a unifying principle, an operational procedure for developing a sampling strategy and formal testable hypotheses was constructed. The procedure is applicable across disciplines, when the investigator restates the research question in symbolic form, i.e., quantifies it. The procedure is set within the statistical framework of general linear models. The dependent variable is any arbitrary function of remotely sensed data and the independent variables are values or levels of factors which represent regional climatic conditions and/or properties of the Earth's surface. These factors are operationally defined as maps from the U.S. National Atlas (U.S.G.S., 1970). Eighty-five maps from the National Atlas, representing climatic and surface attributes, were automated by point counting at an effective resolution of one observation every 17.6 km (11 miles) yielding 22,505 observations per map. The maps were registered to one another in a two step procedure producing a coarse, then fine scale registration. After registration, the maps were iteratively checked for errors using manual and automated procedures. The error free maps were annotated with identification and legend information and then stored as card images, one map to a file. A sampling design will be accomplished through a regionalization analysis of the National Atlas data base (presently being conducted). From this analysis a map of homogeneous regions of the U.S.A. will be created and samples (LANDSAT scenes) assigned by region.

Labovitz, M. L.↗

Agricultural Fires in the Southeastern U.S. During SEAC4RS: Emissions of Trace Gases and Particles and Evolution of Ozone, Reactive Nitrogen, and Organic Aerosol

Emissions from 15 agricultural fires in the southeastern U.S. were measured from the NASA DC-8 research aircraft during the summer 2013 Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) campaign. This study reports a detailed set of emission factors (EFs) for 25 trace gases and 6 fine particle species. The chemical evolution of the primary emissions in seven plumes was examined in detail for ~1.2 h. A Lagrangian plume cross-section model was used to simulate the evolution of ozone (O3), reactive nitrogen species, and organic aerosol (OA). Observed EFs are generally consistent with previous measurements of crop residue burning, but the fires studied here emitted high amounts of SO2 and fine particles, especially primary OA and chloride. Filter-based measurements of aerosol light absorption implied that brown carbon (BrC) was ubiquitous in the plumes. In aged plumes, rapid production of O3, peroxyacetyl nitrate (PAN), and nitrate was observed with (Delta)O3/(Delta)CO, (Delta)PAN/(Delta)NOy, and (Delta)nitrate/(Delta)NOy reaching approx. 0.1, approx. 0.3, and approx.0.3. For five selected cases, the model reasonably simulated O3 formation but underestimated PAN formation. No significant evolution of OA mass or BrC absorption was observed. However, a consistent increase in oxygen-to-carbon (O/C) ratios of OA indicated that OA oxidation in the agricultural fire plumes was much faster than in urban and forest fire plumes. Finally, total annual SO2, NOx, and CO emissions from agricultural fires in Arkansas, Louisiana, Mississippi, and Missouri were estimated (within a factor of approx. 2) to be equivalent to approx. 2% SO2 from coal combustion and approx. 1% NOx and approx. 9% CO from mobile sources.

OA mass or BrC absorption↗

Insulin-like growth factor-I extends in vitro replicative life span of skeletal muscle satellite cells by enhancing G1/S cell cycle progression via the activation of phosphatidylinositol 3'-kinase/Akt signaling pathway

Interest is growing in methods to extend replicative life span of non-immortalized stem cells. Using the insulin-like growth factor I (IGF-I) transgenic mouse in which the IGF-I transgene is expressed during skeletal muscle development and maturation prior to isolation and during culture of satellite cells (the myogenic stem cells of mature skeletal muscle fibers) as a model system, we elucidated the underlying molecular mechanisms of IGF-I-mediated enhancement of proliferative potential of these cells. Satellite cells from IGF-I transgenic muscles achieved at least five additional population doublings above the maximum that was attained by wild type satellite cells. This IGF-I-induced increase in proliferative potential was mediated via activation of the phosphatidylinositol 3'-kinase/Akt pathway, independent of mitogen-activated protein kinase activity, facilitating G(1)/S cell cycle progression via a down-regulation of p27(Kip1). Adenovirally mediated ectopic overexpression of p27(Kip1) in exponentially growing IGF-I transgenic satellite cells reversed the increase in cyclin E-cdk2 kinase activity, pRb phosphorylation, and cyclin A protein abundance, thereby implicating an important role for p27(Kip1) in promoting satellite cell senescence. These observations provide a more complete dissection of molecular events by which increased local expression of a growth factor in mature skeletal muscle fibers extends replicative life span of primary stem cells than previously known.

NASA Discipline Musculoskeletal↗

Early dark energy at high redshifts: status and perspectives

Early dark energy models, for which the contribution to the dark energy density at high redshifts is not negligible, influence the growth of cosmic structures and could leave observable signatures that are different from the standard cosmological constant cold dark matter ({Lambda}CDM) model. In this paper, we present updated constraints on early dark energy using geometrical and dynamical probes. From WMAP five-year data, baryon acoustic oscillations and type Ia supernovae luminosity distances, we obtain an upper limit of the dark energy density at the last scattering surface (lss), {Omega}{sub EDE}(z{sub lss}) < 2.3 Multiplication-Sign 10{sup -2} (95% C.L.). When we include higher redshift observational probes, such as measurements of the linear growth factors, Gamma-Ray Bursts (GRBs) and Lyman-{alpha} forest (Ly{alpha}), this limit improves significantly and becomes {Omega}{sub EDE}(z{sub lss}) < 1.4 Multiplication-Sign 10{sup -3} (95% C.L.). Furthermore, we find that future measurements, based on the Alcock-Paczynski test using the 21cm neutral hydrogen line, on GRBs and on the Ly{alpha} forest, could constrain the behavior of the dark energy component and distinguish at a high confidence level between early dark energy models and pure {Lambda}CDM. In this case, the constraints on the amount of early dark energy at the last scattering surface improve by a factor ten, when compared to present constraints. We also discuss the impact on the parameter {gamma}, the growth rate index, which describes the growth of structures in standard and in modified gravity models.

79 ASTRONOMY AND ASTROPHYSICS↗

DBD plasma-assisted ethanol steam reforming for green H 2 production: Process optimization through response surface methodology (RSM)

Herein this work investigates ethanol steam reforming (ESR) to produce hydrogen (H 2 ) in a dielectric barrier discharge (DBD) plasma reactor. A five-level, three-factor experiment design was performed using a response surface methodology (RSM) to evaluate the combined effects of the three process parameters, including discharge power, total flow rate, and ethanol-to-water (EtOH/H 2 O) molar ratio on the plasma-assisted ESR reaction. Quadratic regression models were employed in RSM to fit the experimental results and present the correlation between process parameters and targeted responses (EtOH conversion, H 2 yield, H 2 selectivity, and specific energy requirement (SER) for H 2 production). The results suggested that the EtOH/H 2 O molar ratio is considered to have the most significant effect on the EtOH conversion and H 2 , H 2 selectivity, while the total flow rate is the most significant parameter determining SER for H 2 production. Process optimization demonstrated the optimal process conditions, including a discharge power of 55.9 W, a total flow rate of 26.7 ml/min, and an EtOH/H 2 O molar ratio equal to 0.34. A validation test was performed and confirmed the feasibility of the optimization process.

08 HYDROGEN↗