Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Io's sodium directional features - Evidence for a magnetospheric-wind-driven gas escape mechanism

Elongated features in Io's sodium cloud, directed away from Jupiter and inclined both to the north and to the south of the satellite's orbital plane, have been observed. The north/south directions of the features are correlated with Io's magnetic longitude, suggesting a formation mechanism involving the oscillating plasma torus. It is shown by means of a model analysis that the features can result from a source of high-velocity (about 20 km/s) sodium combined with the oscillating neutral sodium sink provided by the plasma. The phase relationship between the features' directions and Io's magnetic longitude can be understood if escaping sodium is initially directed at near right angles to Io's orbital motion. The directionality of the features requires that the sodium flux from equatorial regions be higher than that from the poles. The initial directions and speeds of sodium atoms escaping Io to form the directional features can be understood in terms of a magnetospheric-wind-driven escape mechanism. The one sequence of directional feature observations that has been analyzed in detail implies a high-speed sodium source rate of about 10 to the 26th atoms/s.

Pilcher, C. B.↗

Spectroscopy of the 3 micron emission features

High-spectral-resolution observations of the 3.3 and 3.4 microns features in the three planetary nebulae NGC 7027, IC 418, and BD +30 deg 3639, in the H II region S106, and in the 'red rectangle' HD 44179 are presented. The profile of the unidentified 3.3 microns emission feature is similar in all five sources. The unidentified feature previously referred to as the 3.4 microns feature actually consists of two components, a low-level emission from 3.35 to 3.60 microns and a narrow emission peak at 3.40 microns. The strength of the latter feature relative to that of the 3.3 microns feature varies by a a factor of three from source to source. The origin and properties of these features may be explained by further development of the small-grain models of Sellgren (1984) and Leger and Puget (1984).

Geballe, T. R.↗

Spectral feature design in high dimensional multispectral data

The High resolution Imaging Spectrometer (HIRIS) is designed to acquire images simultaneously in 192 spectral bands in the 0.4 to 2.5 micrometers wavelength region. It will make possible the collection of essentially continuous reflectance spectra at a spectral resolution sufficient to extract significantly enhanced amounts of information from return signals as compared to existing systems. The advantages of such high dimensional data come at a cost of increased system and data complexity. For example, since the finer the spectral resolution, the higher the data rate, it becomes impractical to design the sensor to be operated continuously. It is essential to find new ways to preprocess the data which reduce the data rate while at the same time maintaining the information content of the high dimensional signal produced. Four spectral feature design techniques are developed from the Weighted Karhunen-Loeve Transforms: (1) non-overlapping band feature selection algorithm; (2) overlapping band feature selection algorithm; (3) Walsh function approach; and (4) infinite clipped optimal function approach. The infinite clipped optimal function approach is chosen since the features are easiest to find and their classification performance is the best. After the preprocessed data has been received at the ground station, canonical analysis is further used to find the best set of features under the criterion that maximal class separability is achieved. Both 100 dimensional vegetation data and 200 dimensional soil data were used to test the spectral feature design system. It was shown that the infinite clipped versions of the first 16 optimal features had excellent classification performance. The overall probability of correct classification is over 90 percent while providing for a reduced downlink data rate by a factor of 10.

Chen, Chih-Chien Thomas↗

Cloud field classification based on textural features

An essential component in global climate research is accurate cloud cover and type determination. Of the two approaches to texture-based classification (statistical and textural), only the former is effective in the classification of natural scenes such as land, ocean, and atmosphere. In the statistical approach that was adopted, parameters characterizing the stochastic properties of the spatial distribution of grey levels in an image are estimated and then used as features for cloud classification. Two types of textural measures were used. One is based on the distribution of the grey level difference vector (GLDV), and the other on a set of textural features derived from the MaxMin cooccurrence matrix (MMCM). The GLDV method looks at the difference D of grey levels at pixels separated by a horizontal distance d and computes several statistics based on this distribution. These are then used as features in subsequent classification. The MaxMin tectural features on the other hand are based on the MMCM, a matrix whose (I,J)th entry give the relative frequency of occurrences of the grey level pair (I,J) that are consecutive and thresholded local extremes separated by a given pixel distance d. Textural measures are then computed based on this matrix in much the same manner as is done in texture computation using the grey level cooccurrence matrix. The database consists of 37 cloud field scenes from LANDSAT imagery using a near IR visible channel. The classification algorithm used is the well known Stepwise Discriminant Analysis. The overall accuracy was estimated by the percentage or correct classifications in each case. It turns out that both types of classifiers, at their best combination of features, and at any given spatial resolution give approximately the same classification accuracy. A neural network based classifier with a feed forward architecture and a back propagation training algorithm is used to increase the classification accuracy, using these two classes of features. Preliminary results based on the GLDV textural features alone look promising.

Sengupta, Sailes Kumar↗

Spatial variations of the 3 micron emission features within nebulae

The 3 micron spectra is presented for the Orion bar region and the Red Rectangle. In both objects spectra were obtained at more than one location, corresponding to different distances from the excitation source. The well known 3.3 and 3.4 micron emission bands are seen in both objects as well as the recently discovered features at 3.46, 3.51, and 3.57 microns in the Orion bar spectra. The spectra show that the relative strengths of the 3 micron emission features vary within the Orion bar. As distance from the exciting star increases, the 3.4 and 3.51 micron features increase, and the 3.46 micron feature decreases in strength, relative to the strong 3.3 micron feature. These are two possible interpretations which are postulated, each of which involves the breaking of bonds by UV radiation, which removes the modes responsible for the 3.4 micron emission near the star. The two possible bond ruptures are the CH bond in small polycyclic aromatic hydrocarbons (PAHs), or the bond to an aliphatic subgroup. It has to be pointed out that neither interpretation appears entirely satisfactory. The vibrational overtone interpretation cannot explain the presence or behavior of the 3.46 micron feature, whereas the laboratory spectra of aliphatic sidegroups contain many more features in the 3 micron region than are observed in the astronomical sources.

Moorhouse, Alan↗

IRAS low-resolution spectral observations of the 10 and 18 micron silicate emission feature

The IRAS LRS Atlas contains 8-23 micron spectra of 1816 stars with silicate emission features. In order to study the shapes of the silicate dust features, the 117 stars whose emission features appear to be optically thin and which have the best signal-to-noise ratio at the longest wavelengths were analyzed. Simple spherical dust shell models were calculated in both the optically thin and the slightly optical thick approximations. From the comparison of the predicted spectra of the dust and stellar continuum, the emissivity function Kappa(lambda) was derived. In the different stars, the shape of the 10-micron feature is either narrow or broad and it is peaked either at about 9.7 microns or at 10 microns. Either particle size effects (particles above 0.75 microns in radius) or optical depth effects (central optical depth about 1) could broaden the 10-micron feature. Chemical composition differences no doubt are also important, particularly as regards the position of the peak of the 10-micron feature. The stars with the peak at 10 microns are more closely confined to the Galactic plane than the stars with the peak at 9.7 microns. The shape of the 18-micron feature is essentially the same in all stars, and can be used to extend the interstellar extinction curve past 13 to 22 microns.

Simpson, Janet P.↗

Feature extraction and classification algorithms for high dimensional data

Feature extraction and classification algorithms for high dimensional data are investigated. Developments with regard to sensors for Earth observation are moving in the direction of providing much higher dimensional multispectral imagery than is now possible. In analyzing such high dimensional data, processing time becomes an important factor. With large increases in dimensionality and the number of classes, processing time will increase significantly. To address this problem, a multistage classification scheme is proposed which reduces the processing time substantially by eliminating unlikely classes from further consideration at each stage. Several truncation criteria are developed and the relationship between thresholds and the error caused by the truncation is investigated. Next an approach to feature extraction for classification is proposed based directly on the decision boundaries. It is shown that all the features needed for classification can be extracted from decision boundaries. A characteristic of the proposed method arises by noting that only a portion of the decision boundary is effective in discriminating between classes, and the concept of the effective decision boundary is introduced. The proposed feature extraction algorithm has several desirable properties: it predicts the minimum number of features necessary to achieve the same classification accuracy as in the original space for a given pattern recognition problem; and it finds the necessary feature vectors. The proposed algorithm does not deteriorate under the circumstances of equal means or equal covariances as some previous algorithms do. In addition, the decision boundary feature extraction algorithm can be used both for parametric and non-parametric classifiers. Finally, some problems encountered in analyzing high dimensional data are studied and possible solutions are proposed. First, the increased importance of the second order statistics in analyzing high dimensional data is recognized. By investigating the characteristics of high dimensional data, the reason why the second order statistics must be taken into account in high dimensional data is suggested. Recognizing the importance of the second order statistics, there is a need to represent the second order statistics. A method to visualize statistics using a color code is proposed. By representing statistics using color coding, one can easily extract and compare the first and the second statistics.

Lee, Chulhee↗

Discovery of Cyclotron Resonance Features in the Soft Gamma Repeater SGR 1806-20

We report evidence for cyclotron resonance features from the Soft Gamma Repeater SCR 1806-20 in outburst, detected with the Rossi X-ray Timing Explorer in the spectrum of a long, complex precursor that preceded a strong burst. The features consist of a narrow 5.0 keV absorption line with modulation near its second and third harmonics (at 11.2 keV and 17.5 keV respectively). The line features are transient and are detected in the harder part of the precursor. The 5.0 keV feature is strong, with an equivalent width of approx. 500 eV, and a narrow width of < 0.4 keV. Interpreting the features as electron cyclotron lines in the context of accretion models leads to a large mass-radius ratio (M/R > 0.3 Solar Mass/km) that is inconsistent with neutron stars, or requires a low (5 - 7) x 10(exp 11) G magnetic field that is unlikely for SGRs. The line widths are also narrow compared to those of electron cyclotron resonances observed so far in X-ray pulsars. In the magnetar picture, the features are plausibly explained as ion cyclotron resonances in an ultra-strong magnetic field, which have recently been predicted from magnetar candidates. In this view, the 5.0 keV feature is consistent with a proton cyclotron fundamental whose energy and width are close to model predictions. The line energy would correspond to a surface magnetic field of 1.0 x 10(exp 15) G for SGR 1806-20, in good agreement with that inferred from the spin-down measure in the source.

Ibrahim, A. I.↗

Discovery of Cyclotron Resonance Features in the Soft Gamma Repeater SGR 1806-20

We report evidence of cyclotron resonance features from the Soft Gamma Repeater SGR 1806-20 in outburst, detected with the Rossi X-ray Timing Explorer in the spectrum of a long, complex precursor that preceded a strong burst. The features consist of a narrow 5.0 keV absorption line with modulation near its second and third harmonics (at 11.2 keV and 17.5 keV respectively). The line features are transient and are detected in the harder part of the precursor. The 5.0 keV feature is strong, with an equivalent width of approx. 500 eV and a narrow width of less than 0.4 keV. Interpreting the features as electron cyclotron lines in the context of accretion models leads to a large mass-radius ratio (M/R greater than 0.3 solar mass/km) that is inconsistent with neutron stars or that requires a low (5-7) x 10(exp 11) G magnetic field that is unlikely for SGRs. The line widths are also narrow compared with those of electron cyclotron resonances observed so far in X-ray pulsars. In the magnetar picture, the features are plausibly explained as ion cyclotron resonances in an ultra-strong magnetic field that have recently been predicted from magnetar candidates. In this view, the 5.0 keV feature is consistent with a proton cyclotron fundamental whose energy and width are close to model predictions. The line energy would correspond to a surface magnetic field of 1.0 x 10(exp 15) G for SGR 1806-20, in good agreement with that inferred from the spin-down measure in the source.

Ibrahim, Alaa I.↗

Three Years of TRMM Precipitation Features: Radar, Radiometric, and Lightning Characteristics - Part 1

During its first three years, the Tropical Rainfall Measuring Mission (TRMM) satellite observed nearly six million precipitation features. The population of precipitation features is sorted by lightning flash rate, minimum brightness temperature, maximum radar reflectivity, areal extent, and volumetric rainfall. For each of these characteristics, essentially describing the convective intensity or the size of the features, the population is broken into categories consisting of the top 0.001%, top 0.01%, top 0.1%, top 1%, top 2.4%, and remaining 97.6%. The set of 'weakest / smallest' features comprises 97.6% of the population because that fraction does not have detected lightning, with a minimum detectable flash rate 0.7 fl/min. The greatest observed flash rate is 1351 fl/min; the lowest brightness temperatures are 42 K (85-GHz) and 69 K (37- GHz). The largest precipitation feature covers 335,000 sq km and the greatest rainfall from an individual precipitation feature exceeds 2 x 10(exp 12) kg of water. There is considerable overlap between the greatest storms according to different measures of convective intensity. The largest storms are mostly independent of the most intense storms. The set of storms producing the most rainfall is a convolution of the largest and the most intense storms. This analysis is a composite of the global tropics and subtropics. Significant variability is known to exist between locations, seasons, and meteorological regimes. Such variability will be examined in Part II. In Part I, only a crude land / Ocean separation is made. The known differences in bulk lightning flash rates over land and Ocean result from at least two differences in the precipitation feature population: the frequency of occurrence of intense storms, and the magnitude of those intense storms that do occur. Even when restricted to storms with the same brightness temperature, same size, or same radar reflectivity aloft, the storms over water are considerably less likely to produce lightning than are comparable storms over land.

Cecil, Daniel J.↗

Three Years of TRMM Precipitation Features: Radar, Radiometric, and Lightning Characteristics - Part 1

During its first three years, the Tropical Rainfall Measuring Mission (TRMM) satellite observed nearly six million precipitation features. The population of precipitation features is sorted by lightning flash rate, minimum brightness temperature, maximum radar reflectivity. areal extent, and volumetric rainfall. For each of these characteristics, essentially describing the convective intensity or the size of the features, the population is broken into categories consisting of the top 0.001%, top 0.01%, top 0.1%, top 1%, top 2.4%. and remaining 97.6%. The set of weakest/smallest features composes 97.6% of the population because that fraction does not have detected lightning, with a minimum detectable flash rate of 0.7 flashes (fl) per minute. The greatest observed flash rate is 1351 fl per minute; the lowest brightness temperatures are 42 K (85 GHz) and 69 K (37 GHz). The largest precipitation feature covers 335 000 square kilometers and the greatest rainfall from an individual precipitation feature exceeds 2 x 10 kg per hour of water. There is considerable overlap between the greatest storms according to different measures of convective intensity. The largest storms are mostly independent of the most intense storms. The set of storms producing the most rainfall is a convolution of the largest and the most intense storms. This analysis is a composite of the global Tropics and subtropics. Significant variability is known to exist between locations. seasons, and meteorological regimes. Such variability will be examined in Part II. In Part I, only a crude land-ocean separation is made. The known differences in bulk lightning flash rates over land and ocean result from at least two differences in the precipitation feature population: the frequency of occurrence of intense storms and the magnitude of those intense storms that do occur. Even when restricted to storms with the same brightness temperature, same size, or same radar reflectivity aloft, the storms over water are considerably less likely to produce lightning than are comparable storms over land.

Cecil, Daniel J.↗

Morphological Feature Extraction for Automatic Registration of Multispectral Images

The task of image registration can be divided into two major components, i.e., the extraction of control points or features from images, and the search among the extracted features for the matching pairs that represent the same feature in the images to be matched. Manual extraction of control features can be subjective and extremely time consuming, and often results in few usable points. On the other hand, automated feature extraction allows using invariant target features such as edges, corners, and line intersections as relevant landmarks for registration purposes. In this paper, we present an extension of a recently developed morphological approach for automatic extraction of landmark chips and corresponding windows in a fully unsupervised manner for the registration of multispectral images. Once a set of chip-window pairs is obtained, a (hierarchical) robust feature matching procedure, based on a multiresolution overcomplete wavelet decomposition scheme, is used for registration purposes. The proposed method is validated on a pair of remotely sensed scenes acquired by the Advanced Land Imager (ALI) multispectral instrument and the Hyperion hyperspectral instrument aboard NASA's Earth Observing-1 satellite.

Plaza, Antonio↗

The Detection of 6.9 µm Emission Features in the Infrared Spectra of IRAS 04296+3429, IRAS 05341+0852, IRAS 22272+5435: Evidence for the Presence of Hn-PAHs in Post AGB Stars

Polycyclic aromatic hydrocarbons (PAHs) are generally believed to be ubiquitous in space and responsible for numerous telltale interstellar infrared emission bands. In Sandford et al., (2013), we suggested that polycyclic aromatic hydrocarbons with excess hydrogenation at their periphery (Hn-PAHs) may be an important subclass of these molecules in some astrophysical environments. These molecules are candidates to explain objects with anomalously large 3.4 μm features, which are presumed to be associated with the aliphatic C—H stretching vibrations of the excess hydrogen. In that work, we suggest that for Hn-PAHs to be a viable candidate as the source for this 3.4 μm feature, we must also expect to observe methylene scissoring modes at 6.9 μm. In this work, we continue to develop the Hn-PAH hypothesis with a focus on the 6.9 μm feature. We also present some new observations of three post-asymptotic giant branch (post- AGB) objects with abnormally large 3.4 μm features, IRAS 04296+3429, IRAS 05341+0852, IRAS 22272+5435, in addition to one post-AGB object with normal PAH emissions, IRAS 20000+3239. These observations were made using the FORCAST instrument in grism mode on the Stratospheric Observatory for Infrared Astronomy (SOFIA) aircraft (Adams et al. 2010) and demonstrate the presence of a 6.9 μm feature for the three objects with abnormally large 3.4 μm features and no detectable 6.9 μm feature for the normal PAH emitter. These results are consistent with the hypothesis that Hn-PAHs are a possible source of these infrared emission bands.

ISM↗

Large Impact Features on Ganymede and Callisto as Revealed By Geological Mapping and Morphometry

The icy Galilean satellites are host to a broad range of impact feature morphologies. Hypotheses seeking to explain the diversity of these impact features consider the effects of impact melt, the physical state of the subsurface at the time of impact, and the impactor characteristics. As part of a larger effort to assess the role of these factors in the formation and evolution of these impact features, we have performed topographic and geological mapping of 19 large impact features on Ganymede and Callisto. These are divided into two main morphological groups: craters (subdivided into pit, dome, and anomalous dome craters), and penepalimpsests/palimpsests. The transitions from pit, dome, to anomalous dome craters appear to be size-dependent up to diameters of ∼170 km. The morphologies of pit and dome craters appear to be independent of their age or geologic context. The impacts that formed them only affected a cold, rigid ice layer, with the development of pits and raised annuli on their floors possibly stemming from the evolution of a pocket of impact melt. The subdued rims and floors of anomalous dome craters indicate the increasing effect of a weak, warm ice layer on impact feature morphology with increasing size, but their prominent annuli and pits indicate that mobilization of impact melt is also a factor. The very low topographic relief of older penepalimpsests and palimpsests indicates that their impacts penetrated the ice shell to mobilize very large volumes of pre-existing liquid from a subsurface layer, with little contribution to the final feature morphology from impact melt. Penepalimpsests are distinguished from palimpsests by the higher frequency of concentric ridges within their interiors, indicating a generally more robust state of the subsurface that could better support the rotation and uplift of solid material during impact, even if a crater-like depression could not be supported. A few impact features seem to be transitional between anomalous dome craters and penepalimpsests, and the overlap of anomalous dome craters, penepalimpsests, and palimpsests in terms of diameter as well as age indicates that impactor size and subsurface properties over time are major factors in determining which of these morphologies emerges.

Oliver L White↗

Passive Safety Features for Small Modular Reactors

The rapid growth in the size and complexity of commercial nuclear power plants in the 1970s spawned an interest in smaller, simpler designs that are inherently or intrinsically safe through the use of passive design features. Several designs were developed, but none were ever built, although some of their passive safety features were incorporated into large commercial plant designs that are being planned or built today. In recent years, several reactor vendors are actively redeveloping small modular reactor (SMR) designs with even greater use of passive features. Several designs incorporate the ultimate in passive safety they completely eliminate specific accident initiators from the design. Other design features help to reduce the likelihood of an accident or help to mitigate the accident s consequences, should one occur. While some passive safety features are common to most SMR designs, irrespective of the coolant technology, other features are specific to water, gas, or liquid-metal cooled SMR designs. The extensive use of passive safety features in SMRs promise to make these plants highly robust, protecting both the general public and the owner/investor. Once demonstrated, these plants should allow nuclear power to be used confidently for a broader range of customers and applications than will be possible with large plants alone.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Intrinsic Feature Pose Measurement for Awake Animal SPECT Imaging

New developments have been made in optical motion tracking for awake animal imaging that measures 3D position and orientation (pose) for a single photon emission computed tomography (SPECT) imaging system. Ongoing SPECT imaging research has been directed towards head motion measurement for brain studies in awake, unrestrained mice. In contrast to previous results using external markers, this work extracts and tracks intrinsic features from multiple camera images and computes relative pose from the tracked features over time. Motion tracking thus far has been limited to measuring extrinsic features such as retro-reflective markers applied to the mouse s head. While this approach has been proven to be accurate, the additional animal handling required to attach the markers is undesirable. A significant improvement in the procedure is achieved by measuring the pose of the head without extrinsic markers using only the external surface appearance. This approach is currently being developed with initial results presented here. The intrinsic features measurement extracts discrete, sparse natural features from 2D images such as eyes, nose, mouth and other visible structures. Stereo correspondence between features for a camera pair is determined for calculation of 3D positions. These features are also tracked over time to provide continuity for surface model fitting. Experimental results from live images are presented.

59 BASIC BIOLOGICAL SCIENCES↗

eFESTA: Ensemble Feature Exploration with Surface Density Estimates

We propose surface density estimate (SDE) to model the spatial distribution of surface features-isosurfaces, ridge surfaces, and streamsurfaces-in 3D ensemble simulation data. The inputs of SDE computation are surface features represented as polygon meshes, and no field datasets are required (e.g., scalar fields or vector fields). The SDE is defined as the kernel density estimate of the infinite set of points on the input surfaces and is approximated by accumulating the surface densities of triangular patches. We also propose an algorithm to guide the selection of a proper kernel bandwidth for SDE computation. An ensemble Feature Exploration method based on Surface densiTy EstimAtes (eFESTA) is then proposed to extract and visualize the major trends of ensemble surface features. For an ensemble of surface features, each surface is first transformed into a density field based on its contribution to the SDE, and the resulting density fields are organized into a hierarchical representation based on the pairwise distances between them. The hierarchical representation is then used to guide visual exploration of the density fields as well as the underlying surface features. We demonstrate the application of our method using isosurface in ensemble scalar fields, Lagrangian coherent structures in uncertain unsteady flows, and streamsurfaces in ensemble fluid flows.

Computational modeling↗

FALDO: a semantic standard for describing the location of nucleotide and protein feature annotation

Nucleotide and protein sequence feature annotations are essential to understand biology on the genomic, transcriptomic, and proteomic level. Using Semantic Web technologies to query biological annotations, there was no standard that described this potentially complex location information as subject-predicate-object triples. In this paper, we have developed an ontology, the Feature Annotation Location Description Ontology (FALDO), to describe the positions of annotated features on linear and circular sequences. FALDO can be used to describe nucleotide features in sequence records, protein annotations, and glycan binding sites, among other features in coordinate systems of the aforementioned “omics” areas. Using the same data format to represent sequence positions that are independent of file formats allows us to integrate sequence data from multiple sources and data types. The genome browser JBrowse is used to demonstrate accessing multiple SPARQL endpoints to display genomic feature annotations, as well as protein annotations from UniProt mapped to genomic locations. Our ontology allows users to uniformly describe – and potentially merge – sequence annotations from multiple sources. Finally, data sources using FALDO can prospectively be retrieved using federalised SPARQL queries against public SPARQL endpoints and/or local private triple stores.

59 BASIC BIOLOGICAL SCIENCES↗