Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Dynamic Structure of Magnetized High Energy Density Plasmas (Final Report)

This report summarizes results of project DE-SC0022202 ``Dynamic Structure of Magnetized High Energy Density Plasmas,'' which was originally funded for the period 08/01/2021 - 7/31/2022, but was no-cost extended to 7/31/2023. The primary objectives of the work, as stated in the original proposal, were ``develop a theory to describe a novel state of magnetized high energy density plasmas, benchmark the theory using first-principles molecular dynamics simulations, and apply the results to develop a means to interpret x-ray scattering measurements in future experiments.'' These were the goals of the original project proposal, which was for a 3 year project. The project was ultimately funded for 1 year, and so the work completed focused on the goals described for only the first year of the proposed work. This included further developing a kinetic theory for strongly magnetized plasmas, applying it to compute fluid-scale (MHD) transport coefficients, and to test the predictions using molecular dynamics simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy density dependence of hydrogen combustion efficiency in atmospheric pressure microwave plasma

The recovery of tritium in nuclear fusion plants is a key issue for safety. So far, the oxidation procedure using an atmospheric pressure plasma is expected to be part of the recovery method. In this study, in order to clarify the mechanism of hydrogen oxidation by plasma chemistry, we have investigated the dependence of hydrogen combustion efficiency on gas flow rate and input power in the atmospheric pressure microwave plasma. It has been found that the combustion efficiency depends on energy density of absorbed microwave power. Hence, the energy density is considered as a key parameter for combustion processes. Also neutral gas temperatures inside and outside the plasma were measured by an optical emission spectroscopy method and thermocouple. The result shows that the neutral gas temperature in the plasma is much higher than the outside temperature of plasma. The high neutral gas temperature may affect the combustion reaction. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron-beam-based Compton scattering x-ray source for probing high-energy-density physics

The physics basis for an electron-beam-based Compton scattering x-ray source is investigated for single-shot experiments at the major high-energy-density facilities, such as the Omega Laser Facility, National Ignition Facility, and Z pulsed power facility. A source of monoenergetic ( δ ε / ε < 5 % ) 10- to 50-keV x rays can be produced by scattering of a short-pulse optical laser by a 23- to 53-MeV electron beam and collimating the scattered photons. The number and spectrum of scattered photons are calculated as a function of electron packet charge, electron and laser pulse duration, laser intensity, and collision geometry. A source delivering greater than 10 10 photons in a 1-mm-radius spot and 100-ps time resolution is plausible with the available electron gun and laser technology. Applications of this source for x-ray diffraction, x-ray imaging, x-ray absorption fine structure, and x-ray absorption spectroscopy in high-energy-density physics experiments are described, demonstrating significant advancements compared to the present state of the art. Published by the American Physical Society 2024

47 OTHER INSTRUMENTATION↗

A Novel NASICON‐Type Na 4 MnCr(PO 4 ) 3 Demonstrating the Energy Density Record of Phosphate Cathodes for Sodium‐Ion Batteries

Abstract Sodium‐ion batteries (SIBs) have attracted incremental attention as a promising candidate for grid‐scale energy‐storage applications. To meet practical requirements, searching for new cathode materials with high energy density is of great importance. Herein, a novel Na superionic conductor (NASICON)‐type Na 4 MnCr(PO 4 ) 3 is developed as a high‐energy cathode for SIBs. The Na 4 MnCr(PO 4 ) 3 nanoparticles homogeneously embedded in a carbon matrix can present an extraordinary reversible capacity of 160.5 mA h g −1 with three‐electron reaction at ≈3.53 V during the Na + extraction/insertion process, realizing an unprecedentedly high energy density of 566.5 Wh kg −1 in the phosphate cathodes for SIBs. It is intriguing to reveal the underlying mechanism of the unique Mn 2+ /Mn 3+ , Mn 3+ /Mn 4+ , and Cr 3+ /Cr 4+ redox couples via X‐ray absorption near‐edge structure spectroscopy. The whole electrochemical reaction undergoes highly reversible single‐phase and biphasic transitions with a moderate volume change of 7.7% through in situ X‐ray diffraction and ex situ high‐energy synchrotron X‐ray diffraction. Combining density functional theory (DFT) calculations with the galvanostatic intermittent titration technique, the superior performance is ascribed to the low ionic‐migration energy barrier and desirable Na‐ion diffusion kinetics. The present work can offer a new insight into the design of multielectron‐reaction cathode materials for SIBs.

Zhang, Jian↗

Einstein-cartan gravity with torsion field serving as an origin for the cosmological constant or dark energy density

We analyse the Einstein–Cartan gravity in its standard form R=R+K{sup 2}, where R and R are the Ricci scalar curvatures in the Einstein–Cartan and Einstein gravity, respectively, and K{sup 2} is the quadratic contribution of torsion in terms of the contorsion tensor K. We treat torsion as an external (or background) field and show that its contribution to the Einstein equations can be interpreted in terms of the torsion energy–momentum tensor, local conservation of which in a curved spacetime with an arbitrary metric or an arbitrary gravitational field demands a proportionality of the torsion energy–momentum tensor to a metric tensor, a covariant derivative of which vanishes owing to the metricity condition. This allows us to claim that torsion can serve as an origin for the vacuum energy density, given by the cosmological constant or dark energy density in the universe. This is a model-independent result that may explain the small value of the cosmological constant, which is a long-standing problem in cosmology. We show that the obtained result is valid also in the Poincaré gauge gravitational theory of Kibble, where the Einstein–Hilbert action can be represented in the same form: R=R+K{sup 2}.

79 ASTRONOMY AND ASTROPHYSICS↗

Electrochemically Stable High Energy Density Lithium-Sulfur Batteries

Lithium-Sulfur batteries (LSB) have emerged as one of the strong contenders for high energy density rechargeable batteries in the Li-ion battery domain. The LSB system is considered as the most promising to achieve the next milestone in energy density of 500 Wh/kg. However, the LSB system is plagued with problems of polysulfide formation which are soluble in the organic electrolyte leading to loss in capacity and eventual cell failure. The problem is further compounded by dendrite formation on the Li anode during electrochemical cycling leading to puncturing of the separator causing eventual short-circuiting of the cell and consequent heat generation resulting in major safety hazards of flammability of the organic liquid electrolyte and impending explosion. This chapter describes various approaches developed to combat both cathode and anode issues. These involve synthesis and characterization of complex framework materials (CFMs) for confining the polysulfides and sulfur in the LSB cathodes. The CFMs include a CFM host and a coating applied to the CFM host, which includes one or more form of an electronic conductor, a lithium-ion conductor and a functional electrocatalyst for electrocatalytically converting the soluble polysulfides to Li 2 S. Further, sulfur is infiltrated into the CFM host creating a sulfur-carbon linkage serving as effective anchors for trapping the ensuing polysulfides. The systems have been tested in coin cells and pouch cells with metallic Li anodes under lean electrolyte conditions of 3-4 μl/mg of electrolyte (E) to sulfur (S) ratios showing promise and feasibility. New emergent dendrite-free alloys have also been identified to test against pure Li and CFM cathodes in coin cell and pouch cell configurations under lean electrolyte conditions. Results of these studies are described and discussed with thoughts on future directions.

25 ENERGY STORAGE↗

Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries

Undesired electrode–electrolyte interactions prevent the use of many high-energy-density cathode materials in practical lithium-ion batteries. Efforts to address their limited service life have predominantly focused on the active electrode materials and electrolytes. Here an advanced three-dimensional chemical and imaging analysis on a model material, the nickel-rich layered lithium transition-metal oxide, reveals the dynamic behaviour of cathode interphases driven by conductive carbon additives (carbon black) in a common nonaqueous electrolyte. Region-of-interest sensitive secondary-ion mass spectrometry shows that a cathode-electrolyte interphase, initially formed on carbon black with no electrochemical bias applied, readily passivates the cathode particles through mutual exchange of surface species. By tuning the interphase thickness, we demonstrate its robustness in suppressing the deterioration of the electrode/electrolyte interface during high-voltage cell operation. Finally, our results provide insights on the formation and evolution of cathode interphases, facilitating development of in situ surface protection on high-energy-density cathode materials in lithium-based batteries.

25 ENERGY STORAGE↗

High Energy Density CNT/NaI Composite Cathodes for Sodium-Ion Batteries

The Na-iodine system has potential as a positive electrode in sodium-ion batteries due to its fast reaction kinetics and high energy density. Here, the fabrication of a NaI-loaded carbon nanotube (CNT) mat cathode is presented and the use of NaI as a Na-ion battery cathode is reported for the first time. Freestanding electrodes show a capacity retention of 92% after 100 cycles at 100 mA h g -1 and a high specific energy density (≈473 W h kg -1 , second discharge basis vs Na metal) and small hysteresis (0.03 V). Adding a CNT mat interlayer between the NaI composite cathode and the separator, and fluoroethylene carbonate to the electrolyte significantly suppresses shuttling of active materials during cycling. Using ex situ X-ray photoelectron spectroscopy and Raman data, an understanding of the relevant processes occurring during cycling of the CNT/NaI cathode is developed.

25 ENERGY STORAGE↗

Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density: Cooperative Research and Development Final Report, CRADA Number CRD-12-499

Under this CRADA NREL will support Creare's project for the Department of Energy entitled 'Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density' which involves the development of an air-flow based cooling product that increases energy density, safety, and reliability of hybrid electric vehicle battery packs.

25 ENERGY STORAGE↗

Updating the axion cold dark matter energy density

We improve the estimate of the axion cold dark matter energy density by considering the new values of current quark masses, the quantum chromodynamics phase transition effect and a possible anharmonic effect.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of local energy density functionals from Brueckner-Hartree-Fock calculations

Skyrme-like energy density functionals are built upon new ab initio calculations of nuclear matter which reproduce the empirical saturation properties. These calculations are performed in the framework of the Brueckner-Hartree-Fock approximation with consistent two- and three-body forces. The Skyrme parametrizations are obtained from a simultaneous fit of the spin-isospin components of the potential energy of symmetric nuclear matter and of the experimental energies and charge radii of a number of closed-shell and closed-subshell nuclei. These parametrizations are tested on the energies and charge radii of the Sn isotopic chain and on the {sup 208}Pb giant resonances, showing a substantial improvement of the LNS functional obtained in a previous fit. The comparison with standard Skyrme forces can give some hints on how to reconcile nuclear matter and finite nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Universal reduced basis for the calibration of covariant energy density functionals

The reduced basis method is used to construct a “universal” basis of Dirac orbitals that may be applicable throughout the nuclear chart to calibrate covariant energy density functionals. Relative to the successful development of a reduced basis emulator for the nonrelativistic Schrödinger equation, the Dirac equation adds an extra layer of complexity due to the existence of negative energy states, which complicates building an efficient reduced basis. However, once this problem is mitigated, the resulting reduced basis is able to accurately and efficiently reproduce the high-fidelity model at a fraction of the computational cost. We are confident that the resulting reduced basis will serve as a foundational element in developing rapid and accurate emulators. In turn, these emulators will play a critical role in the Bayesian optimization of covariant energy density functionals.

Bayesian methods↗

Energy density and spectrum of single-cycle and sub-cycle electromagnetic pulses

Based on the exact solution of the Maxwell equations in the form of a collapsing spherical vector wave specified by an arbitrary function of time, we have calculated the maximum energy density that can be achieved when focusing extremely short pulses of various shapes. It is shown that our earlier formula expressing the maximum energy density in terms of the spectrum parameters for Gaussian quasi-monochromatic pulses is approximately (with an accuracy of ±40 %) valid for the main types of extremely short pulses. (extremely short laser pulses)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dense Graphene Monolith for High Volumetric Energy Density Li-S Batteries

Despite the outstanding gravimetric performance of lithium-sulfur (Li-S) batteries, their practical volumetric energy density is normally lower than that of lithium-ion batteries, mainly due to the low density of nanostructured sulfur as well as the porous carbon hosts. Here, a novel approach is developed to fabricate high-density graphene bulk materials with ink-bottle-like mesopores by phosphoric acid (H 3 PO 4 ) activation. These pores can effectively confine the polysulfides due to their unique structure with a wide body and narrow neck, which shows only a 0.05% capacity fade per cycle for 500 cycles (75% capacity retention) for accommodating polysulfides. With a density of 1.16 g cm -3 , a hybrid cathode containing 54 wt% sulfur delivers a high volumetric capacity of 653 mA h cm -3 . As a result, a device-level volumetric energy density as high as 408 W h L -1 is achieved with a cathode thickness of 100 mu m. This is a periodic yet practical advance to improve the volumetric performance of Li-S batteries from a device perspective. Furthermore, this work suggests a design principle for the real use Li-S batteries although there is a long way ahead to bridge the gap between Li-S batteries and Li-ion batteries in volumetric performance.

25 ENERGY STORAGE↗

Expansion-free evolving spheres must have inhomogeneous energy density distributions

In a recent paper a systematic study on shearing expansion-free spherically symmetric distributions was presented. As a particular case of such systems, the Skripkin model was mentioned, which corresponds to a nondissipative perfect fluid with a constant energy density. Here we show that such a model is inconsistent with junction conditions. It is shown that in general for any nondissipative fluid distribution, the expansion-free condition requires the energy density to be inhomogeneous. As an example we consider the case of dust, which allows for a complete integration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Oxygen-deficient ammonium vanadate for flexible aqueous zinc batteries with high energy density and rate capability at -30 °C

Aqueous zinc batteries (AZBs) have received significant attention owing to environmental friendliness, high energy density and inherent safety. However, lack of high-performance cathodes has become the main bottleneck of AZBs development. Here, oxygen-deficient NH 4 V 4 O 10–x ·nH 2 O (NVOH) microspheres are synthesized and used as cathodes for AZBs. The experimental test and theoretical calculations demonstrate that the oxygen vacancies in the lattice lower the Zn 2+ diffusion energy barrier, which enables fast Zn 2+ diffusion and good electrochemical performance in a wide temperature range. The suppressed side reactions also can help to improve the low temperature performance. NVOH shows a high energy density of 372.4 Wh kg –1 and 296 Wh kg –1 at room temperature and –30 °C, respectively. Moreover, NVOH maintains a 100% capacity retention after 100 cycles at 0.1 A g –1 and ~94% capacity retention after 2600 cycles at 2 A g –1 and –30 °C. Investigation into the mechanism of the process reveals that the capacity contribution of surface capacitive behaviors is dominant and capacity attenuation is mainly caused by the decay of diffusion-controlled capacity. As a result, flexible AZBs can steadily power portable electronics under different bending states, demonstrating its great potential in wide-temperature wearable device.

25 ENERGY STORAGE↗

Understanding the implications of the data from recent high-energy-density Kelvin-Helmholtz shear layer experiments

The first successful high energy density Kelvin-Helmholtz (KH) shear layer experiments (O.A. Hurricane, et al., Phys. Plasmas, 16, 056305, 2009; E.C. Harding, et al., Phys. Rev. Lett., 103, 045005, 2009) demonstrated the ability to design and field a target that produces an array of large diagnosable KH vortices in a controlled fashion. Data from these experiments vividly showed the complete evolution of large distinct eddies, from formation to apparent turbulent break-up. Unexpectedly, low-density bubbles/cavities comparable to the vortex size ({approx} 300 - 400 {micro}m) appeared to grow up in the free-stream flow above the unstable material interface. In this paper, the basic principles of the experiment will be discussed, the data reviewed, and the progress on understanding the origin of the above bubble structures through theory and simulation will be reported on.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗