Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron Affinities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Pulsed Light Synthesis of High Entropy Nanocatalysts with Enhanced Catalytic Activity and Prolonged Stability for Oxygen Evolution Reaction

The ability to synthesize compositionally complex nanostructures rapidly is a key to high-throughput functional materials discovery. In addition to being time-consuming, a majority of conventional materials synthesis processes closely follow thermodynamics equilibria, which limit the discovery of new classes of metastable phases such as high entropy oxides (HEO). Herein, a photonic flash synthesis of HEO nanoparticles at timescales of milliseconds is demonstrated. By leveraging the abrupt heating and cooling cycles induced by a high-power-density xenon pulsed light, mixed transition metal salt precursors undergo rapid chemical transformations. Hence, nanoparticles form within milliseconds with a strong affinity to bind to the carbon substrate. Oxygen evolution reaction (OER) activity measurements of the synthesized nanoparticles demonstrate two orders of magnitude prolonged stability at high current densities, without noticeable decay in performance, compared to commercial IrO 2 catalyst. This superior catalytic activity originates from the synergistic effect of different alloying elements mixed at a high entropic state. It is found that Cr addition influences surface activity the most by promoting higher oxidation states, favoring optimal interaction with OER intermediates. The proposed high-throughput method opens new pathways toward developing next-generation functional materials for various electronics, sensing, and environmental applications, in addition to renewable energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Computational Evaluation of Nicotinamide Cofactor Biomimetics

Oxidoreductase enzymes are widely used biocatalysts due to their high enantioselectivity and broad substrate compatibility in useful transformations. Many oxidoreductases require nicotinamide cofactors (i.e., NAD(P)H). To replace this costly natural cofactor, synthetic nicotinamide cofactor biomimetics (NCBs) offer different shapes, binding affinities, and reducing potentials that exceed the capabilities of wild-type NAD(P)H. However, the ill-defined structure–activity relationships (SARs) of various NCBs slow rationally guided innovation, such as customized reducing potentials. Here, we dissect two essential elements of NCB design, holding the nicotinamide invariant. First, the linker length between the nicotinamide and an unconjugated aromatic ring uncovered unexpected benefits to redox activity for two or three carbon linkers. Second, substitution on this unconjugated aryl group (Ring 2) might not be expected to affect activity. However, SAR trends demonstrate substantial benefits to reductive potential conferred by electron-donating functionalities on Ring 2. Furthermore, catalysis by two enzymes demonstrates enzyme-dependent tolerance or sensitivity to the NCB structures. Density functional theory (DFT) and computational modeling provide a theoretical framework to understand and build upon these observations. Ring 2 reaches up to the nicotinamide to stabilize its positive charge after oxidation through π–π stacking and charge transfer. Thus, the systematic examination of NCB’s stability, electrochemical redox potentials, and kinetics uncovers trends for the improved design of NCBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward Optimizing Electrospun Nanofiber Fuel Cell Catalyst Layers: Microstructure and Pt Accessibility

This work investigates how local ionomer/platinum (Pt) interactions and ionomer distribution in electrospun Pt/Vulcan nanofiber electrodes impact ionomer coverage, proton accessibility, and oxygen reduction reaction (ORR) performance in proton-exchange membrane fuel cells. Insights from various in situ electrochemical diagnostics were utilized in conjunction with ex situ microscopic characterization to understand how the electrode microstructure—both at the aggregate level and near the ionomer/platinum interface—is affected by electrospinning in comparison to ultrasonic spraying. The effect of the carrier polymer poly(acrylic acid) (PAA) concentration from 5–20 wt % (with respect to total ink solids) on the resulting nanofiber morphology is discussed. Electron microscopy observations and CO displacement measurements indicated that Pt/Vulcan nanofibers prepared with a higher PAA concentration (15 wt %) were conformally coated with a film of ionomer on the exterior of the fiber, which resulted in an overall lower ionomer coverage on both Pt and carbon throughout the fiber diameter. In contrast, 10 wt % PAA leads to a uniform intrafiber distribution of the ionomer within the fibers, increasing the overall ionomer coverage and proton accessibility under both wet and dry conditions. These differences in the local ionomer coverage on Pt between 10 and 15 wt % PAA were also attributed to differences in the adsorption/interaction affinities between PAA and the ionomer onto the catalyst surface in the ink using zeta potential measurements. Additional fuel cell electrochemical tests on the electrospun electrodes show improvements in ORR kinetics and high-current-density H 2 /air performance compared to the ultrasonically sprayed electrodes.

25 ENERGY STORAGE↗

Protein Motifs for Proton Transfers That Build the Transmembrane Proton Gradient

Biological membranes are barriers to polar molecules, so membrane embedded proteins control the transfers between cellular compartments. Protein controlled transport moves substrates and activates cellular signaling cascades. In addition, the electrochemical gradient across mitochondrial, bacterial and chloroplast membranes, is a key source of stored cellular energy. This is generated by electron, proton and ion transfers through proteins. The gradient is used to fuel ATP synthesis and to drive active transport. Here the mechanisms by which protons move into the buried active sites of Photosystem II (PSII), bacterial RCs (bRCs) and through the proton pumps, Bacteriorhodopsin (bR), Complex I and Cytochrome c oxidase (CcO), are reviewed. These proteins all use water filled proton transfer paths. The proton pumps, that move protons uphill from low to high concentration compartments, also utilize Proton Loading Sites (PLS), that transiently load and unload protons and gates, which block backflow of protons. PLS and gates should be synchronized so PLS proton affinity is high when the gate opens to the side with few protons and low when the path is open to the high concentration side. Proton transfer paths in the proteins we describe have different design features. Linear paths are seen with a unique entry and exit and a relatively straight path between them. Alternatively, paths can be complex with a tangle of possible routes. Likewise, PLS can be a single residue that changes protonation state or a cluster of residues with multiple charge and tautomer states.

cytochrome c oxidase↗

Design of lightweight BCC multi-principal element alloys with enhanced hydrogen storage using a machine learning-driven genetic algorithm

Body-centered cubic (BCC) based multi-principal element alloy (MPEA) hydrides have demonstrated significant potential for compact and efficient hydrogen storage. In this work, we first leverage machine learning (ML) models to predict the hydrogen affinity, storage capacity and phase stability of BCC MPEAs, creating a unique hydrogen-to-metal (H/M) predictor for materials with unprecedented performance. We developed a metaheuristic optimizer high-throughput framework by interfacing ML models with a genetic algorithm for the accelerated search of {Mg, Al, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Nb, Mo} based lightweight BCC MPEAs with improved hydrogen storage characteristics. We report five new MPEAs with a predicted gravimetric hydrogen storage capacity of around 3.5 wt% or more, including Cr 0.09 Mg 0.73 Ti 0.18 (4.25 wt% H) and Cr 0.21 Nb 0.11 Ti 0.35 V 0.33 (3.5 wt% H). The electronic structure of the top-performing composition, Cr 0.09 Mg 0.73 Ti 0.18 , was analyzed using density functional theory (DFT) to understand the reasons for its improved hydrogen storage properties compared to TiFe (1.90 wt% H), LaNi 5 (1.37 wt% H) or BCC MPEAs like TiVNbCr (3.70 wt% H). Temperature-dependent molecular dynamics (MD) studies were further performed on optimized BCC MPEAs to qualitatively study hydrogen mobility and analyze the effect of different elemental composition on bulk hydrogen diffusion. Our findings demonstrate how a ML assisted genetic algorithm framework can be used for efficient search of stable, lightweight and cost-effective MPEAs while minimizing the need for expensive ab initio calculations.

DFT↗

Nucleotide- and metalloid-driven conformational changes in the arsenite efflux ATPase ArsA

Arsenite (As III ) is toxic to all organisms due to its ability to tightly bind exposed thiols within cells. An important As III resistance mechanism in prokaryotes involves proteins encoded by thearsoperon. A central component of thearsoperon in many bacteria is the cytoplasmic ATPase, ArsA, which orchestrates a series of nucleotide-dependent handoffs, starting with the capture of As III by the ArsD metallochaperone and culminating in its removal from the cell by the ArsB efflux pump. Although the mechanism of ArsA has been widely studied, the molecular details of how nucleotide hydrolysis modulates these events remain unclear. ArsA is an archetypal member of the intradimeric Walker A (IWA) family of ATPases, implicated in a diversity of complex biological functions. Conformational changes typical of IWA ATPases have been postulated to drive these molecular events but have not been demonstrated. We report cryogenic electron microscopy (cryo-EM) structures of ArsA in MgADP-bound and MgATP-boundopenstates, as well as a distinctclosedMgATP-bound state liganded to As III . X-ray absorption spectroscopy (XAS) confirmed three-coordinate binding of As III to the conserved cysteines at the metalloid-binding site of the closed state. Coupled with biochemical characterization, our cryo-EM structures reveal key conformational changes in the ArsA catalytic cycle consistent with other IWA ATPases and provide the structural basis for allosteric activation of nucleotide hydrolysis by As III . This work establishes how the nucleotide state of ArsA transiently creates a high-affinity binding site that can sequester metalloid within the cell, followed by a nucleotide-driven handoff to ArsB for efflux.

Science & Technology - Other Topics↗

Molecular Iodine Interactions with Fe, Ni, Cr, and Stainless Steel Alloys

The adsorption behavior of molecular iodine is important for understanding the spread of radioiodine in a nuclear accident. Prior experiments indicate that, in addition to the interaction with Fe, molecular iodine [i.e., I 2(g) ] also interacts with the next most abundant components of austenitic stainless steel (i.e., Ni, and Cr) at room temperature. Here, we investigate iodine adsorption on Fe, Ni, and Cr while focusing on understanding the variables affecting adsorption as well as the iodine compounds that are formed during adsorption. Scanning electron microscopy and energy-dispersive X-ray spectroscopy were used to characterize the surfaces of exposed metal particles and aid in the understanding of the morphology and chemistry of iodine interactions with the substrates. Inductively coupled plasma optical emission spectroscopy was used to detect low levels of metal iodides and X-ray photoelectron spectroscopy was used to confirm the formation of the metal iodides. The role of environmental factors (e.g., humidity and oxygen content) for iodine adsorption on metal substrates is addressed. The individual metals demonstrated formation of metal iodides for Fe and Ni particles from interaction with I 2(g) . The formation of metal iodides may indicate the affinity of iodine for the respective metal. In this study, the iodine affinities ranked Fe > Ni > Cr as determined by the quantity of chemisorbed iodine. This trend is also supported by the distributions and proportions of metals in the corrosion product of the stainless steels. The exposures without oxygen and humidity indicate the potential of a multistep iodine adsorption process where iodine first attacks the oxide layer and then chemisorbs to the exposed metal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Reactivity of Pristine and Reduced Spinel CoFe 2 O 4 (001)/(100) Surfaces

Cobalt ferrite, CoFe 2 O 4 (CFO), nanocrystals are efficient and competitive anode materials in the field of electrochemical water splitting. Using density functional theory with on-site Hubbard U corrections (DFT+U), we have investigated the structural, electronic and magnetic properties of CFO (001)/(100) surfaces, as well as their reactivities towards water adsorption. Special attention has been focused on the formation of oxygen vacancies (V O ), due to their key role in the oxidation activity of metal oxides, often based on the Mars-van-Krevelen mechanism. Our results show that vacancy formation is easiest at oxygen sites that are not bound to tetrahedrally-coordinated Fe. Water adsorbs mainly in molecular form on the Co/Fe metal cations, whereas it dissociates at defects. In comparison to other spinels, CFO is similar to NiFe 2 O 4 , exhibiting relatively low energy cost of V O formation and a strong affinity of the vacancies towards water. Furthermore, these findings suggest that CFO may be a more promising oxidation catalyst than NiCo 2 O 4 and Co 3 O 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the water dynamics near hydrophilic, nanostructured CuO surfaces by quasielastic and inelastic neutron scattering

We have used quasielastic and inelastic neutron scattering to investigate the structure, dynamics, and phase transitions of water interacting with superhydrophilic CuO surfaces that not only possess a strong affinity for water but also a “grass-like” topography that is rough on both micro- and nanoscales. Here, we report quasielastic neutron scattering (QENS) measurements on two samples differing in water content at five temperatures below 280 K. The QENS spectra show water undergoing two different types of diffusive motion near the CuO surfaces: a “slow” translational diffusion occurring on a nanosecond time scale and a faster rotational motion. Further from the surfaces, there is “fast” translational diffusion comparable in rate to that of bulk supercooled water and the rotational motion occurring in the interfacial water. Analysis of the QENS spectra supports wetting of water to the CuO blades as seen in electron microscopy images. In addition, we observe an anomalous temperature dependence of the QENS spectra on cooling from 270 to 230 K with features consistent with a liquid–liquid phase transition. We suggest that the solvent-like properties of the coexisting bulk-like water in our CuO samples are a significant factor in determining the temperature dependence of the interfacial water’s dynamics. Our results are compared with those obtained from two well-studied substrate classes: (1) silicas that contain ordered cylindrical nanopores but have weaker hydrophilicity and (2) nanoparticles of other transition-metal oxides, such as TiO 2 , which share the strong hydrophilicity of our samples but lack their porosity.

36 MATERIALS SCIENCE↗

Living Filter Designs for In-Line Recovery and Sorting of Critical materials

This project explored “bio-mining” of critical materials from electronic waste (E-waste) streams by developing living filters arrays capable of recovering these materials, focusing on the platinum group metals (PGMs) and rare earth elements (REEs). While highly toxic, E-waste is considered a valuable “urban mine” as it contains critical materials such as PGMs and REEs with orders of magnitude higher purity than the richest ores. The aim of the project was to: (1) develop mechanically robust, silk-based biomaterial filtration membranes that can capture REEs from dilute aqueous waste; (2) design and build 3D bioprinted living filters containing encapsulated electrochemically active bacteria (EAB) capable of bio-reducing PGMs and recovering them from waste streams; and (3) constructing combined living filter arrays using both components to efficiently capture REE and PGM from the same waste stream. The developed silk-based filtration membranes were self-assembled using silk-nanofibrils (SNFs) derived from silkworm (Bombyx mori) cocoons in conjunction with recombinant silk-elastin-like proteins (SELPs), which contained lanthanide-binding peptide tags (LBTs) with a high affinity and specificity towards REEs. These 100% biodegradable protein-based membranes were capable of recovering up to 85% of model REE ions (Tb 3+ ) filtered through the membrane, with ~50% recovery achieved in the presence of high concentrations (100X) of common interfering metals (Ca 2+ , Cu 2+ , Fe 3+ , Zn 2+ ). REE captured by the membranes were easily recovered by applying a low pH desorption buffer. The membranes also demonstrated substantial reusability, with only a 30% loss in binding capacity after 4 cycles of REE binding and recovery. To recover the PGMs, we created a bottom-up assembling strategy to construct a living hydrogel composed of a seamlessly integrated living catalyst, Shewanella loihica PV-4 (PV-4), for metal reduction, and their structural and functional linkers, bio-reduced graphene oxide (B-rGO). This hydrogel demonstrated a close to 90% recovery of model metal ions, Pd, from a simulated e-waste leaching stream with minimum-to-no biomass production. It’s also worth noting that the Pd recovery is initiated immediately after the introduction of living hydrogel, compared to conventional biocarriers that required start-up times within hours to days. Overall, these living hydrogels demonstrated superior bioactivity, structural integrity, and agility over existing biocarriers, which offers extensive opportunities to advance the biological metal recovery with unparallel efficiency, reduced energy/material consumption, and minimal environmental impact.

36 MATERIALS SCIENCE↗

Understanding and controlling water-organic co-transport in amorphous microporous materials

The transport of molecules in microporous material is a significant and active area of research in separation applications. The movement of vapor/liquid molecules in a high-loading condition in microporous spaces is especially challenging to interrogate. This project aims to understand and control the transport of complex water and organic solvent mixtures in varying structures of microporous carbon molecular sieve (CMS) and activated carbon membranes. Modeling of transport behavior in such carbonaceous samples using computational modeling is difficult due to their amorphous structure. Therefore, this research intends to study the transport mechanism of water-organic mixtures by experimentally revealing fundamental transport properties, such as guest sorption amounts as well as diffusion and permeation rates. Considering the different size and guest-host affinity of water and organic solvent molecules, the objective of this research is to understand the structural conditions within the ultramicropores and micropores that generate different types of molecular transport and selection mechanisms within such complex systems. Carbonaceous materials are developed using tailored pyrolysis techniques to pyrolyze polymeric precursors, including polyvinylidene chloride (PVDC),polyvinylidene fluoride (PVDF), polymer of intrinsic microporosity (PIM) -1, and fully aromatic polyamide. The initial stage of the research will focus on the microscopic diffusion and sorption studies of pure component water, xylene isomers, and n,n- dimethylformamide within various carbons. Additional structural investigation on CMS, such as gas physisorption and neutron scattering studies, will be executed to gain deeper insight into these structure-transport relationships. Scanning electron microscopy and X-ray photoelectron microscopy are also used to further characterize these materials. The research will progress to probe mutual diffusion of complex water-organic mixtures within various CMS microstructures. Competitive sorption and permeation studies of the binary mixtures in different microstructural CMS will be followed. The obtained binary mixture transport parameters were used to predict binary water-organic mixtures transport.

36 MATERIALS SCIENCE↗

Picolinate-based acyclic ligand for rare earth element extraction and separation

The rare earth elements (REEs) play an important role in many modern technologies, particularly those relevant to clean energy. Despite their increasing importance, obtaining them in elementally pure forms suitable for downstream applications is challenging due to their similar chemical properties. This problem has impeded efforts to efficiently and selectively extract them from end-of-life materials and electronic waste. Here, we report a cost-efficient acyclic picolinate-based chelator H 4 aapa. The REE stability constants (log K ML ) of this chelator were measured via pH potentiometric and UV-Visible spectrophotometric titrations, revealing it to preferably bind light over heavy REEs like many recently reported 18-membered macrocycles. Its REE complexes were characterized by X-ray crystallography and NMR spectroscopy, demonstrating that this chelator can attain different conformations. The unique properties of aapa were subsequently used to separate REEs via the dissolution of insoluble REE oxalate mixtures. This dissolution-based separation led to large separation factors, the most significant being that for the Ce 3+ /Lu 3+ pair (38.6) at pH 4. Leveraging the strong REE binding affinity of aapa, we further demonstrated this chelator can leach REEs from authentic end-of-life materials in the form of magnet waste and autocatalyst smelting (autocat) slag. With this approach, exposure of these materials to a 20 mM solution of aapa at neutral pH generates a metal-containing solution enriched in Nd 3+ and Dy 3+ by 56.9 wt% and 3.0 wt%, marking a 4-fold improvement over the use of 4 M HNO 3 .

Gao, Yangyang [University of California, Santa Bar↗

Effects of heteroatom doping on hydrogen uptake in tungsten oxide

Redox-active transition metal oxides (TMOs) that can undergo proton-insertion coupled electron transfer (PICET) are promising candidates for catalyzing molecular conversion reactions which require the transfer of hydrogen atoms (or the thermochemical equivalent, H + , e − ). Herein, we studied the effects of isovalent (Mo 6+ ) and aliovalent (V 5+ and Nb 5+ ) heteroatom doping on the electrochemical PICET behavior of monoclinic tungsten oxide (WO 3 ). Cyclic voltammetry in aqueous acidic electrolytes shows that the addition of redox-active heteroatoms (Mo 6+ and V 5+ ) leads to systematic shifts in redox couple half-wave potentials (E 1/2 ), broadening, and an overall decrease in the current response. Conversely, the non-redox active heteroatom (Nb 5+ ) only reduces the current response with no observable peak-current broadening. This broadening is attributed to changes in the proton binding affinities of oxygen in different chemical environments, i.e., bridging different pairs of redox-active transition metal cations. We determined the hydrogen bond dissociation free energy (H BDFE) values to elucidate the thermodynamic effect of heteroatom substitution. Density functional theory calculations reveal a differentiation in the hydrogen binding and oxygen vacancy formation energies between heteroatom doped structures. The PICET-induced structural phase transitions of the pristine and doped samples were further probed with operando electrochemical X-ray diffraction (EC-XRD) and with ex situ chemical reduction. The broadening of the potential-dependent current response with increased heteroatom doping manifests in the operando EC-XRD results as prolonged structural regions where multiple hydrogen bronze phases exist and the appearance of cubic bronze phases at lower degrees of reduction compared to pristine WO 3 .

Holzapfel, Noah P. [North Carolina State Universit↗

Structural and biophysical analysis of a Haemophilus influenzae tripartite ATP-independent periplasmic (TRAP) transporter

Tripartite ATP-independent periplasmic (TRAP) transporters are secondary-active transporters that receive their substrates via a soluble-binding protein to move bioorganic acids across bacterial or archaeal cell membranes. Recent cryo-electron microscopy (cryo-EM) structures of TRAP transporters provide a broad framework to understand how they work, but the mechanistic details of transport are not yet defined. Here we report the cryo-EM structure of the Haemophilus influenzae N-acetylneuraminate TRAP transporter (HiSiaQM) at 2.99 Å resolution (extending to 2.2 Å at the core), revealing new features. The improved resolution (the previous HiSiaQM structure is 4.7 Å resolution) permits accurate assignment of two Na + sites and the architecture of the substrate-binding site, consistent with mutagenic and functional data. Moreover, rather than a monomer, the HiSiaQM structure is a homodimer. We observe lipids at the dimer interface, as well as a lipid trapped within the fusion that links the SiaQ and SiaM subunits. We show that the affinity (K D ) for the complex between the soluble HiSiaP protein and HiSiaQM is in the micromolar range and that a related SiaP can bind HiSiaQM. This work provides key data that enhances our understanding of the ‘elevator-with-an-operator’ mechanism of TRAP transporters.

59 BASIC BIOLOGICAL SCIENCES↗

Structural insights into the unique recognition module between α-synuclein peptide and nanobody

Nanobodies are single-domain fragments of antibodies with comparable specificity and affinity to antibodies. They are emerging as versatile tools in biology due to their relatively small size. Here, we report the crystal structure of a specific nanobody Nbα-syn01, bound to a 14 amino acid long peptide of α-synuclein (αSyn), a 140-residue protein whose aggregation is associated with Parkinson's disease. The complex structure exhibits a unique binding pattern where the αSyn peptide replaces the N-terminal region of nanobody. Recognition is mediated principally by extended main chain interaction of the αSyn peptide and specificity of the interaction lies in the central 48–52 region of αSyn peptide. Structure-guided truncation of Nbα-syn01 shows tighter binding to αSyn peptide and improved inhibition of α-synuclein aggregation. The structure of the truncated complex was subsequently determined and was indistinguishable to full length complex as the full-length form had no visible electron density for the N-terminal end. These findings reveal the molecular basis for a previously unobserved binding mode for nanobody recognition of α-synuclein, providing an explanation for the enhanced binding, and potential for an alternate framework for structure-based protein engineering of nanobodies to develop better diagnostic and therapeutic tools.

59 BASIC BIOLOGICAL SCIENCES↗

Redox Potentials for Hydrogen Species in Acetonitrile and Tetrahydrofuran

The properties of the fundamental hydrogen species, proton (H+), hydrogen atom (H•), and hydride anion (H-) are critical to a vast range of chemical processes, yet their thermodynamic properties in nonaqueous solvents are not well established. A hybrid supermolecule-continuum approach is used to predict the Gibbs free energies of solvation (?G°solv) and standard redox potentials (E°) for the 2H+/H2 and H•/H- couples in acetonitrile (MeCN) and tetrahydrofuran (THF) following the approach previously used for water. Gas phase geometry optimizations were done using density functional theory (DFT) with the ?B97XD functional, Møller-Plesset second-order perturbation theory (MP2) with augmented correlation-consistent basis sets and composite-correlated molecular orbital theory (G3MP2 and G3MP2B3). Additional single point calculations in gas phase were performed for H- affinity for MeCN and THF at the coupled cluster CCSD(T) level using MP2 geometries. Solvation was included using the self-consistent reaction field SMD model. For H+, the ?G°solv values are predicted to be -252.2 kcal/mol in MeCN and -261.0 kcal/mol in THF. The redox potentials for the 2H+/H2 couple are +0.49 V in MeCN and +0.11 V in THF relative to the aqueous SHE, consistent with the available experimental data. The ?G°solv for H- is predicted to be -80 kcal/mol in MeCN and -68 in THF, and for H•, ?G°solv is predicted to be -1.3 kcal/mol in THF and -2.0 kcal/mol in MeCN. These solvation energies yield respective calculated redox potentials for the H•/H- couple of -0.14 V in MeCN and -0.68 V in THF relative to the aqueous SHE. H2 solvation is slightly exergonic in MeCN (-3.3 kcal/mol) and near thermoneutral in THF (+1.3 kcal/mol). The pKa(H2) is predicted to be 45.4 in MeCN and 47.8 in THF. The proton-coupled electron transfer (PCET) accounting term CG was evaluated giving values on the ferrocene scale within approximately 2 kcal/mol of literature in both solvents. These results provide benchmarks for hydrogen redox chemistry in MeCN and THF and improve consistency across E°, ?G°solv, pKa, and CG. These results provide benchmarks for hydrogen redox chemistry in nonaqueous media challenging previous estimates based on indirect extrapolations and assumptions.

Duda, Damian P.↗

Actinide N-Donor Thermodynamics: Expanding the f-element Covalency Dialogue. Final report

Resolving the chemistry and physics of f-electrons is one of the grand challenges of science for energy technology. A central component of this challenge is describing covalency in actinide-ligand interactions. Crystallography, x-ray spectroscopy and computational techniques have provided reasonable, and in some cases remarkable, support for covalency in actinide-ligand interactions. Courtesy the quality of the results obtained, a significant portion of the covalency dialogue has been forwarded through solid-state and computational studies of the more stable actinides (Th, U, Pu, Np). However; recent reports have questioned whether covalency in actinide interactions increases or decreases across the series. Examination of less-stable trans-actinides (Am, Cm, Bk, Cf and Es) by the aforementioned approaches can be rapidly limited due to material availability, radiological hazards and experimental data to validate computational models. Furthermore, limited thermodynamic data exists to confirm covalency in actinide solution phase interactions that are highly relevant to the remediation and reprocessing of used nuclear fuel. The best-defined interactions of actinides with soft donors in aqueous solutions involve (poly)aminopolycarboxylate (APC) ligands. The chelate effect and binding affinity with the acetic acid APCs subgroups encourages amine interactions with the actinide metal center. In the absence of these factors, amine interactions with actinides are too weak to overcome the protective hydration shell of the dissolved ion. The ability for APCs to force actinide interactions with soft nitrogen donors (as defined by Pearson’s Hard Soft Acid Base theory) encourages the application of these ligands in a variety of processes for actinide recovery from nearly chemically identical lanthanides. The ability to functionalize the amine center of the ligand in a variety of capacities (adding additional amine groups, exchanging the conventional acetate group for an acetate group, etcetera), allows for the APC ligand to serve as a thermodynamic probe for actinide-nitrogen interactions. Perhaps the single most significant breakthrough during the previous funding cycle was the observation that covalency for the transplutonium part of the actinide series can be increasingly influenced with energy degeneracy driven covalency as the actinides become heavier. This was observed most predominantly with dipicolinic acid, but extensions of f-orbital degeneracy were found to affect aliphatic aminopolycarboxylate-actinide complexes through einsteinium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability of Metal–Organic Framework-Supported Amines under Exposure to Ozone Generated from Air

Amine compounds supported on porous materials such as metal–organic frameworks (MOFs) have shown promising performance for direct air capture (DAC) due to their enhanced affinity for CO 2 . Although features such as adsorption capacity and selectivity are paramount in these composites, their long-term stability has a major impact on the operating cost of DAC systems. In this work, changes in carbon capture performance, crystallinity, porosity and chemical environment of the constituting atoms of MOF-amine composites are explored after exposure to ozone and NOx impurities generated from corona discharge applied to air. From the obtained results, the stabilities of Mg 2 (dobpdc) (dobpdc 4– = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) grafted with ethylenediamine (en), N-methylethylenediamine (men), and N,N-dimethylethylenediamine (dmen), as well as MIL-101(Cr) MOF impregnated with polyethylenimine (PEI), are compared. A negative effect in the overall CO 2 adsorption capacity is observed for all MOF composites after exposure, as well as a decrease in the adsorption step pressure of CO 2 for Mg 2 (dobpdc) amine-grafted composites, as shown via dynamic gravimetric adsorption experiments. Spectroscopic analyses indicate that oxidation of amine groups through the formation of nitro functional groups occurs as well as a decrease in the electron-donation interaction between the supported amines and the metal nodes of the MOFs.

adsorption↗