SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An integral balance technique for calculation of the electron energy distribution in a radiation-induced plasma is described. Results predict W-values reasonably well and compare favorably with more complicated Monte-Carlo calculations. The distribution found differs from that in a normal electrical discharge and is of interest in radiation-pumped laser research.
The present work reviews the fluid-mechanical aspects of high-power continuous-wave (CW) lasers. The flow characteristics of these devices appear as classical fluid-mechanical phenomena recast in a complicated interactive environment. The fundamentals of high-power lasers are reviewed, followed by a discussion of the N2-CO2 gas dynamic laser. Next, the HF/DF supersonic diffusion laser is described, and finally the CO electrical-discharge laser is discussed.
The sensitivity of materials in contact with gaseous oxygen (GOX) or liquid oxygen (LOX) was examined. Specifically, the reactivity of materials when in contact with GOX or LOX if subjected to such stimuli as mechanical impact, adiabatic compression (pneumatic impact), or an electrical discharge in the form of a spark were examined. Generally, materials are more sensitive in gaseous oxygen than in liquid oxygen and impact sensitivity is known to increase with increasing pressure. Materials presently being used or considered for use in oxygen systems at KSC were evaluated. Results are given in tabular form.
Results are presented for an experimental study intended to provide sustained load crack growth (SLCG) data for Ti-6Al-4V titanium alloy tanks containing MIL-P-26536 hydrazine and refined hydrazine. Fracture mechanics data on crack growth threshold for heat-treated forgings, aged and unaged welds, and aged and unaged heat-affected zones (HAZ) are presented. All tests were made on uniaxially loaded fracture mechanics specimens involving part-through cracks, and an electrical discharge machined notch was used to start the crack. Fracture mechanics design curves of crack growth threshold stress intensity versus temperature are obtained for the temperature range 40-71 C. Major conclusions are that extreme susceptibility to SLCG in hydrazine is a universal property of unaged weld metal in Ti-6Al-4V titanium alloy of normal interstitial content, and that aging both weld metal and HAZ at 510 C for 4 hr after welding completely removes all susceptibility to SLCG induced by hydrazine, with less susceptibility to SLCG in refined hydrazine.
A 20 kW electric-discharge pumped CN laser oscillating on the A(2) Pi-X(2) Sigma molecular system is presented. Excitation is by a simple longitudinal discharge struck through HCN vapor. Twenty kW peak power is generated in a 150 nsec full-width half-maximum pulse. Two lasing bands were observed in the A-X system: the (0,1) and (0,2) bands near 1.42 and 2.0 microns respectively. Both P and Q branches are active in the two bands, with Q bands stronger. Peak laser energy is 3 mJ. Products of UV photolysis of HCN, electron impact excitation of HCN, and other possible excitation mechanisms and laser efficiency are discussed.
Fast flow can be used to create the population inversion required for lasing action, or can be used to improve laser operation, for example by the removal of waste heat. It is pointed out that at the present time all lasers which are capable of continuous high-average power employ flow as an indispensable aspect of operation. High power laser systems are discussed, taking into account the gasdynamic laser, the HF supersonic diffusion laser, and electric discharge lasers. Aerodynamics and high power lasers are considered, giving attention to flow effects in high-power gas lasers, aerodynamic windows and beam manipulation, and the Venus machine. Applications of high-power laser technology reported are related to laser material working, the employment of the laser in controlled fusion machines, laser isotope separation and photochemistry, and laser power transmission.
A parametric study of the double-pulsed copper chloride laser is reported. The effects of a wide range of variables on the laser energy density and on three characteristic time intervals (the minimum, maximum, and optimum delay time) between the two electrical-discharge pulses were studied. The geometric variables investigated included a tube diameter of 2.3 to 40 mm and a tube length of 3 to 60 cm. Three buffer gases, helium, neon, and argon, were studied over the pressure range 0.5-50 torr, and the tube temperature was varied from 270 to 500 C. The energy density and voltage of both the dissociation and pumping pulse were varied independently from less than 1 mJ/cu cm at 8.5 kV to over 500 mJ/cu cm at 20 kV. The optimum conditions for maximum laser energy density were found to be with 20 torr neon in a 10-mm by 30-cm tube at 400 C. The maximum energy density obtained was 22 microjoules/cu cm.
The paper examines the problem of liquid-hydrogen (LH2) subsonic long-range air transport from the perspectives of airplane manufacturers, the airline operator, the air terminal authority and the LH2 supplier. Emphasis is placed on identifying common problems and interfaces that are likely to occur in preparing for commercial airline operations of LH2 subsonic air transport in the 1990-1995 period. General considerations are discussed relative to sources and cost of gaseous hydrogen, hydrogen liquefaction, and LH2 availability. The fact that hydrogen sustains combustion at altitudes substantially higher than hydrocarbon fuels suggests that air transport can be designed to operate at higher enroute air traffic flight levels. This can be an advantage if only to relieve traffic congestion on heavily traveled routes. Pertinent interfaces in planning for the use of LH2 in air transportation are identified, including productivity and profitability, passenger-fuel compatibility, and lightning and electrical discharges.
Existing techniques are reviewed and novel approaches for broadband photoexcitation of lasers are discussed. This subject is of interest because of the emergence of future intense near equilibrium and blackbody sources, such as the gas core reactor, and electric discharge plasma devices, which are the key to the development of intense broadband radiation sources. The possible use of radiation from solar concentrators in space also fits into this general area. The varied use of photoexcitation of lasers are discussed ranging over direct optical pumping, photodissociation, and photoreionization. In addition, the new uses of laser transitions and chemical reactions is shown. This is accomplished through multiline operation of high pressure tunable lasers which can use the broadband radiation for multiphoton excitation.
There is a continuing interest and need for investigation and development of, various paints, coatings, multi-layer insulation, and electrically conductive paints and coatings used for thermal control and electrical discharge of spacecraft surfaces. Degradation of these surfaces by solar-wind energy particles and ultraviolet irradiation, as well as contamination by the outgassing of materials used in conjunction or close proximity to these surfaces, continues to be a matter of concern. The following is a description of a facility with the capability of evaluating the synergistic effects encountered in the space environment. Actual flight qualification programs are also described.
Based on expected advances in technology, the maximum system efficiency and minimum specific mass have been calculated for closed-cycle CO and CO2 electric-discharge lasers (EDL's) and a direct solar-pumped laser in space. The efficiency calculations take into account losses from excitation gas heating, ducting frictional and turning losses, and the compressor efficiency. The mass calculations include the power source, radiator, compressor, fluids, ducting, laser channel, optics, and heat exchanger for all of the systems; and in addition the power conditioner for the EDL's and a focusing mirror for the solar-pumped laser. The results show the major component masses in each system, show which is the lightest system, and provide the necessary criteria for solar-pumped lasers to be lighter than the EDL's. Finally, the masses are compared with results from other studies for a closed-cycle CO2 gasdynamic laser (GDL) and the proposed microwave satellite solar power station (SSPS).
Results are reported for a laboratory measurement of the electron broadening of the Fe I line at 5383 A as a function of electron density over the temperature range from 8000 to 12,000 K. A linear Z-pinch electrical discharge served as the spectroscopic light source in the experiment, and special precautions were taken to allow for optical-depth effects, which have been a major source of error in previous investigations. The results obtained include a Stark-broadening constant of 0.106 + or - 0.004 x 10 to the -16th A-cu cm at a mean temperature of 9500 K, an estimated Stark width/electron-broadened width ratio of 1.09 + or - 0.02, and a normalized electron-broadened width of 0.097 + or - 0.004 x 10 to the 16th A-cu cm. Comparison of the last result with a calculated value and with a previous measurement indicates that the present measurement is approximately 38% larger than the value measured earlier.
The concept of a laser-powered aircraft is discussed. Laser flight would be completely compatible with existing airports and air-traffic control, with the airplane using kerosene only power, up to a cruising altitude of 9 km where the laser satellite would lock on and beam laser energy to it. Two major components make up the laser turbofan, a heat exchanger for converting laser radiation into thermal energy, and conventional turbomachinery. The laser power satellite would put out 42 Mw using a solar-powered thermal engine to generate electrical power for the closed-cycle supersonic electric discharge CO laser, whose radiators, heat exchangers, supersonic diffuser, and ducting will amount to 85% of the total subsystem mass. Relay satellites will be used to intercept the beam from the laser satellite, correct outgoing beam aberrations, and direct the beam to the next target. A 300-airplane fleet with transcontinental range is projected to save enough kerosene to equal the energy content of the entire system, including power and relay satellites, in one year.
It is proposed that, contrary to the widely accepted Oparin thesis, life on earth arose not in the oceans but in the earth's atmosphere. Difficulties of the Oparin thesis relating to the nonbiological nature of prebiotic evolution are discussed, and autotrophic, photosynthetic cells are proposed as the first living organisms to emerge, thus avoiding these difficulties. Recent developments in the geology of the earth at the time of the emergence of life are interpreted as requiring the absence of liquid surface water, with water partitioned between a molten crust and a dense, CO2-rich atmosphere, similar to the present state of Venus. Biochemistry in such an atmosphere would be primarily membrane chemistry on the interfaces of atmospheric salt water droplets, proceeding at normal temperatures without the absorption of electrical discharges or UV light. Areas not sufficiently accounted for by this scenario include the development of genetic organization and the breaking of the runaway greenhouse condition assumed.
A detailed kinetic model is presented for the analysis of a nuclear pumped CO2-N2-He laser system. The model assumes that collisional recombination is the dominant pumping mechanism. The results show that, for mixture typical of those employed in electric discharge systems, the gain coefficients are such that lasing is not expected to take place. On the other hand, concentrations of CO2 in the range 1/2%-3% are optimal for direct nuclear pumping.
Narrower, impedence-matched pulses initiate stabler electric discharges for gas lasers. Discharges are more efficient, more compact, capable of high repetition rate, and less expensive than conventional electron-beam apparatus, but gas tends to break down and form localized arcs. Pulse-shaping circuit compresses width of high-voltage pulses from relatively-slow rise-time voltage generator and gradually grades circuit impedance from inherent high impedance of generator to low impedence of gas.
A detailed kinetic model is presented for the analysis of a nuclear pumped CO2-N2-He laser system. The model assumes that collisional recombination is the dominant pumping mechanism. The results show that, for mixtures typical of those employed in electric discharge systems, the gain coefficients are such that lasing is not expected to take place. On the other hand, concentrations of CO2 in the range 1/2 percent - 3 percent are optimal for direct nuclear pumping.
Estimates of short and long term solar activity are required for calculating variations in the environment with regard to spacecraft charging, radiation effects, and orbital lifetime. Correlations appear to exist between the time of solar activity and the time of operational anomalies due to electrical discharges when the dielectric surfaces of geosynchronous spacecraft are charged by interaction with the ambient plasma to levels above breakdown voltage. An ability to predict the solar induced variation variability of the plasmas could permit refinement of design criteria. The influence of the radiation on spacecraft materials, systems, and manned operations is summarized. Solar radition effects on the orbital altitude atmospheric density environment and spacecraft lifetimes are also considered.