Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effective temperature model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Radiative transfer in spherical shell atmospheres. III - Application to Venus

A method for partitioning the radiance emerging from a planetary atmosphere in proportion to the average number of scatterings in each atmospheric layer is applied to Venus in order to account for the various atmospheric levels which contribute to the radiance. A backward Monte Carlo technique is used to calculate core and continuum radiances for the P(16) line of the 8689-A CO2 band for various phase angles and colatitudes in a realistic model of the Venus atmosphere. Effective temperatures for the radiance are defined in two ways, both of which are shown to vary little with phase angles up to 120 deg, and fall rapidly beyond this point, in accordance with spectroscopic results. Temperature increases on the order of 7 K and 10 K are found going from the core of the line to the continuum for colatitudes of 90 and 20 deg, respectively, and the effective temperature is calculated to decrease from equator to pole. An effective optical depth is also defined, which, together with the concepts of effective temperature and effective height, is considered to bring a more fundamental understanding of the concept of level of line formation.

Kattawar, G. W.↗
NASA NTRS1984

Materials testing of the IUS techroll seal material

As a part of the investigation of the control system failure Inertial Upper Stage on IUS-1 flight to position a Tracking and Data Relay Satellite (TDRS) in geosynchronous orbit, the materials utilized in the techroll seal are evaluated for possible failure models. Studies undertaken included effect of temperature on the strength of the system, effect of fatigue on the strength of the system, thermogravimetric analysis, thermomechanical analysis, differential scanning calorimeter analysis, dynamic mechanical analysis, and peel test. The most likely failure mode is excessive temperature in the seal. In addition, the seal material is susceptible to fatigue damage which could be a contributing factor.

Nichols, R. L.↗
NASA NTRS1991

Algorithm Computes Hypersonic Flow Of Air

Algorithm simulates three-dimensional hypersonic flow of air or another mixture of gases around blunt body. Accounts for nonequilibrium thermochemical effects via two-temperature mathematical model of molecular excitations and equations for finite-rate chemical reactions. These equations fully coupled to fluid dynamical equations.

Palmer, Grant↗
NASA NTRS1990

Predicted extreme-ultraviolet and X-ray spectrum of a microflare-heated corona

Sturrock et al. (1990) have proposed that a distribution of microflares produces the solar coronal and transition-region emission. This paper presents computed EUV and X-ray emission spectra from that distribution, including the effects of time-dependent ionization. The overall agreement of the predicted spectrum with observations is fairly good, although the predicted emission from the upper transition region is high by a factor of 2. Time-dependent ionization greatly enhances the He II 304-A line, improving the agreement with observation compared with ionization equilibrium models. The predicted effects on temperature-sensitive line ratios of other ions cannot yet be tested against observations due to uncertainties in instrumental calibration and atomic rates.

Raymond, John C.↗
NASA NTRS1994

The CO/SiO radiative instability in cool star atmospheres revisited

We revisit the formation of radiative instabilities in cool star atmospheres and compare our results with those given by Muchmore, Nuth, & Stencel. We have considered the combined influence of CO and SiO molecules and have computed models for a grid of effective temperatures and geometrical dilution factors for the stellar radiation. Our results are based on the analysis of the energy balance of gas elements with prescribed thermodynamic properties. Our results show that radiative instabilities are most likely primarily caused by CO, whereas SiO is expected to play only a minor role, except when the CO density is reduced compared to Local Thermodynamic Equilibrium (LTE) values or the CO band can be assumed to be optically thick. The onset of radiative instabilities is expected to be strongly modified when dynamic phenomena such as stochastic shocks are present. Our results provide strong evidence that dust formation can most likely occur via a radiative instability alone. Therefore, we present a revised version of the Muchmore et al. dust formation paradigm, which also considers hydrodynamic cooling. The new paradigm is particularly relevant in cases where dust is formed relatively close to the stellar photosphere.

Cuntz, M.↗
NASA NTRS2005

Thermal Analysis Methods for Aerobraking Heating

As NASA begins exploration of other planets, a method of non-propulsively slowing vehicles at the planet, aerobraking, may become a valuable technique for managing vehicle design mass and propellant. An example of this is Mars Reconnaissance Orbiter (MRO), which will launch in late 2005 and reach Mars in March of 2006. In order to save propellant, MRO will use aerobraking to modify the initial orbit at Mars. The spacecraft will dip into the atmosphere briefly on each orbit, and during the drag pass, the atmospheric drag on the spacecraft will slow it, thus lowering the orbit apoapsis. The largest area on the spacecraft, and that most affected by the heat generated during the aerobraking process, is the solar arrays. A thermal analysis of the solar arrays was conducted at NASA Langley, to simulate their performance throughout the entire roughly 6-month period of aerobraking. Several interesting methods were used to make this analysis more rapid and robust. Two separate models were built for this analysis, one in Thermal Desktop for radiation and orbital heating analysis, and one in MSC.Patran for thermal analysis. The results from the radiation model were mapped in an automated fashion to the Patran thermal model that was used to analyze the thermal behavior during the drag pass. A high degree of automation in file manipulation as well as other methods for reducing run time were employed, since toward the end of the aerobraking period the orbit period is short, and in order to support flight operations the runs must be computed rapidly. All heating within the Patran Thermal model was combined in one section of logic, such that data mapped from the radiation model and aeroheating model, as well as skin temperature effects on the aeroheating and surface radiation, could be incorporated easily. This approach calculates the aeroheating at any given node, based on its position and temperature as well as the density and velocity at that trajectory point. Run times on several different processors, computer hard drives, and operating systems (Windows versus Linux) were evaluated.

Amundsen, Ruth M.↗
NASA NTRS2010

A Principal Component-Based Radiative Transfer Forward Model (PCRTM) for Vertically in Homogeneous Cloud

A principal-component based radiative transfer model (PCRTM) is developed for simulating the infrared spectral radiance at the top of the atmosphere (TOA). The PCRTM approach removes the redundancy in radiative transfer calculation in high resolution infrared spectra, and saves significant amount of computational time with great accuracy. In PCRTM, both ice and water clouds are treated as effective transmissivity and reflectivity stored in a pre-calculated lookup tables. These quantities are calculated using cloud single scattering properties such as cloud optical depth, cloud particle size, cloud phase, etc. The cloud can be inserted into any pressure layer in the PCRTM model (up to 100 layers). The effective temperature of each cloud layer is treated as a function of its optical depth. To test the accuracy of this approximation, the results are compared with the more rigorous DISORT model, which treats cloud as a plane parallel layer. The root-mean-square error of PCRTM, with respect to DISORT results, is generally less than 0.5 K in brightness temperature. However, the CPU time required by PCRTM was approximately two orders of magnitude less than that required by DISORT.

Li, Hui↗
DOE OSTI2021

Study of the film boiling heat transfer and two-phase flow interface behavior using image processing

Here, in this study, based on a small-scale quench test facility, the two-phase flow interface behavior during quench transients is visualized and analyzed utilizing an image processing framework. The high-fidelity experimental results obtained for two-phase flow in the current framework can support various studies both in the time domain and in the frequency domain. In particular, visualization of the data obtained from different heating surfaces under different test conditions are used to perform a full-scale transient 2-D vapor film reconstruction. The liquid-vapor interface variations in various heat transfer regimes as well as at the initial film breakup point can be directly obtained through the processed data. Moreover, the temporal variation of the interfacial wave frequency approaching quench is investigated in detail. Based on the high-resolution data obtained for the liquid-vapor interface, the detailed phase velocity and temperature profiles are obtained through theoretic analysis, based on which the film boiling heat transfer coefficient (HTC) can be determined. In addition, an improved film boiling HTC model is developed considering the effects of wall superheat, liquid subcooling temperature, vapor film thickness as well as fluid properties. The model is found to predict film boiling HTC well within 15% error.

42 ENGINEERING↗
NASA NTRS2002

Effects of Lateral Plasma Density and Temperature Diffusion on VCSEL Performance

The hydrodynamic model is further verified by applying to a gain-guided single mode VCSEL. DC effects of D(sub NN): (1) increase threshold current J(sub th) and decrease slope efficiency; (2) within the studied range (50% pumping within threshold and realistic diffusion coefficient for a single mode), the L-I relation scales with the relative Injection current (J/J(sub th) - 1). AC effects of D(sub NN): (1) decrease spectral bandwidth and responsivity of direct-current modulation; (2) within the studied range, the frequency response follows the same formal dependence as predicted without diffusion and under a linear gain model, while the resonant frequency position similarly scales with the relative injection current; (3) therefore, it is concluded that the AC effects of D(sub NN) is purely of static nature and reflected via its influence on ot and J(sub th). Within this study, the nonlinear effects of D(sub NN) are mostly reproducible with an equivalent constant diffusion coefficient.

Li, Jian-Zhong↗
DOE OSTI2024

Memory and rejuvenation in glassy systems

Here, the memory effect in a single crystal spin glass (Cu 0.92 Mn 0.08 ) has been measured using 1 Hz ac susceptibility measurements over a reduced temperature range of 0.4 - 0.7 T g and a model of the memory effect has been developed. A double-waiting-time protocol is carried out where the spin glass is first allowed to age at a temperature below T g , T w$_{1}$ , followed by a second aging 4 K lower, T w$_{2}$ . The 4 K separation is sufficient to ensure rejuvenation has occurred. The model is based on calculating overlaps between the growth of the correlation lengths at the two temperatures. It accounts for the absolute magnitude of the memory effect as a function of both waiting times and temperatures. The data can be explained by the memory loss being a function of the relative change in the correlated volume at the first waiting temperature due to growth in the correlations at the second waiting temperature.

36 MATERIALS SCIENCE↗
NASA NTRS1978

The effects of TiO opacity on the atmospheric structure of cool stars

A quantitative investigation is conducted concerning the effect of TiO opacities on the atmospheric temperature structure in late-type stars. Model atmospheres are computed, taking into account opacity-sampling (OS) or straight-mean (SM) opacities for three singlet and three triplet band systems of TiO. Model atmospheres using OS and SM opacities for TiO are compared with models having no TiO, giving attention to the effects of TiO opacities on the temperature structures of various atmospheres and the usefulness of straight-mean TiO opacities in model atmosphere calculations. The results of the model-atmosphere calculations are presented in two graphs. TiO opacities produce a global atmospheric heating which may reach several hundred kelvins. It is shown quantitatively that the TiO molecule is an important source of atmospheric opacity in cool stars of solar composition. The relative importance of TiO opacities to the thermal structure of a stellar atmosphere is influenced in the outer layers by CO and H2O cooling effects and in the deeper layers by CO, CN, and metal line absorption.

Krupp, B. M.↗
NASA NTRS2008

Obtaining Electron Temperatures and Flow Speeds from Thomson Scattered Coronal Emission Observed during the 29 March 2006 Total Solar Eclipse in Libya

An experiment to measure the electron temperature and flow speed in the solar corona by observing the visible K-coronal spectrum was conducted during the total solar eclipse on 29 March 2006 in Libya. New corona1 models accounting for the effect of electron temperature and flow on the resulting K-corona spectrum were used to interpret the observations. Results show electron temperatures of 1.10 +/- 0.05, 0.98 +/- 0.12, and 0.70 +/- 0.08 MK, at l.l{\it R)$-{\odot)$ in the solar north, east and west, respectively, and 0.93 +/- 0.12 MK, at 1.2 R(sub sun) in the solar east. The corresponding outflow speeds obtained from the spectral fit are 103 +/- 92, 0 + 10, 0 + 10, and 0 + 10 km/s. Since the observations are taken only at 1.1 and 1.2 R(sub sun) these velocities , consistent with zero outflow, are in agreement with expectations and provide additional confirmation that the spectral fitting method is working.

Davila, Joseph M.↗
DOE OSTI2022

Deformation and Fracture Behaviors of Cylindrical Battery Shell During Thermal Runaway

Thermal runaway is one of the catastrophic failure modes of lithium-ion cells. During thermal runaway in cylindrical cells, sidewall shell rupture has been identified as a contributing factor for thermal runaway propagation in battery packs. Herein, the deformation and fracture behaviors of the battery shell during thermal runaway are investigated based on in-situ and ex-situ characterization as well as physics-based modeling. The deformation and fracture modes of the battery shell with/without Carbon Fiber Reinforced Polymer (CFRP) sleeves are identified. In the simulation, the strain introduced by thermal expansion of the system is considered, as well as the thermal and strain rate effects on the plastic stage. The final cell shell modeling is validated by cell thermal runaway tests. Results reveal the quantitative relation between shell deformation behaviors and the pressure and temperature distribution. Both the experiment and model demonstrate the effectiveness of adding a tight-fitting CFRP sleeve around the cell in limiting the side-wall rupture of the shell. The use of CFRP tubes introduces a novel phenomenon in the context of uneven temperature distribution. Results shed light on the mechanistic analysis of a cell side-wall rupture during thermal runaway and provide essential guidance for the next-generation safe battery design.

battery casing↗
NASA NTRS1984

Relative abundance of the light ions in the winter nighttime topside ionosphere

Ion concentration measurements with the retarding potential analyzer onboard OGO 6 satellite have served as basis for investigation of the distribution of the light ions, H(+) and He(+), relative to that of O(+) in the 500- to 800-km height range in the winter nighttime ionosphere. This concentration ratio exhibits distinct large-scale horizontal variations, with a relative depression in the ratio observed over a broad region about -45 deg longitude northward of approximately 40 deg dip latitude. The lower ratios are associated primarily with well-defined relative increases in the abundance of O(+), and occur in the same longitude sector that has been characterized in an earlier study by both an observed concurrent relative enhancement in ion temperature and the presence of large fluxes of energetic electrons. Comparisons are presented for the altitude distributions of the concentration ratio between regions representing extremes of the horizontal variation. A simple diffusive-equilibrium model demonstrates that the effects of ion temperature on the O(+) vertical distribution are a significant factor leading to the observed variation of the concentration ratio.

Sanatani, S.↗
NASA NTRS1975

The NATA code: Theory and analysis, volume 1

A computer program for calculating quasi-one-dimensional gas flow in axisymmetric and two-dimensional nozzles and rectangular channels is presented. Flow is assumed to start from a state of thermochemical equilibrium at a high temperature in an upstream reservoir. The program provides solutions based on frozen chemistry, chemical equilibrium, and nonequilibrium flow with finite reaction rates. Electronic nonequilibrium effects can be included using a two-temperature model. An approximate laminar boundary layer calculation is given for the shear and heat flux on the nozzle wall. Boundary layer displacement effects on the inviscid flow are considered also. Chemical equilibrium and transport property calculations are provided by subroutines. The code contains precoded thermochemical, chemical kinetic, and transport cross section data for high-temperature air, CO2-N2-Ar mixtures, helium, and argon. It provides calculations of the stagnation conditions on axisymmetric or two-dimensional models, and of the conditions on the flat surface of a blunt wedge. The primary purpose of the code is to describe the flow conditions and test conditions in electric arc heated wind tunnels.

Bade, W. L.↗
DOE OSTI2020

Effects of isoalcohol blending with gasoline on autoignition behavior in a rapid compression machine: Isopropanol and isobutanol

Alcohols, and particularly isoalcohols, are potentially advantageous blendstocks towards achieving efficient, low-carbon intensity internal combustion engines. Their use in advanced configurations, such as boosted spark-ignition or spark-assisted compression ignition, requires a comprehensive understanding of their blending effects on the low- and intermediate-temperature autoignition behavior of petroleum-derived gasoline. This work reports an experimental and modeling study of such autoignition characteristics quantified in a twin-piston rapid compression machine. Isopropanol and isobutanol are blended into a research-grade gasoline (FACE-F) at oxygenate blend levels of 0 to 30% vol/vol, with tests conducted at pressures of 20 and 40 bar, temperatures from 700 to 1000 K, and dilute stoichiometric fuel loadings. Changes to overall reactivity, including first-stage and main ignition times, and preliminary exothermicity are established, with comparisons made to previous measurements with ethanol-blended FACE-F gasoline. Furthermore, it is found that at low-temperature/NTC conditions (700–860 K) the isoalcohols suppress first-stage reactivity and associated heat release while main ignition times are extended. At NTC/intermediate-temperature (860–1000 K) conditions changes to fuel reactivity are less significant with isopropanol slightly suppressing reactivity and isobutanol promoting ignition. Detailed chemical kinetic modeling is used to interpret the experimental measurements. Overall trends of suppression or promotion in the blending behavior are reasonably captured by the model. Sensitivity and rate of production analyses indicate that at lower temperatures H-atom abstraction reactions from the surrogate fuel molecules (e.g., cyclopentane, isooctane) and the isoalcohols via OH are important leading to TC 3 H 6 OH and IC 4 H 8 OH–C radicals, for isopropanol and isobutanol respectively, which act as scavengers in the system. At higher temperatures, similar chemistries are dominant, but there is an increasing importance of abstraction by HO 2 . The kinetic modeling also indicates that the promoting effect of isobutanol at higher temperatures is due to the increased abstractions at the γ-sites, while at lower temperatures abstraction at the α-site leads to greater reactivity suppression.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Analysis of the effect of heated jet flow on the far field radiation from a noise source

The influence on jet noise radiation of the interaction with the heated moving flow of a parallel twin jet is investigated. An analytical model of jet shielding is developed which consists of the sound field emitted from a stationary, discrete frequency point source impinging on a cylinder of locally parallel flow. The zones in which the various shielding mechanisms dominate are analyzed using the model. The effects of parameters such as jet temperature and flow speed are examined. It is found that the results obtained using the model are comparable to the experimental results for a point noise source impinging on a subsonic isothermal air jet.

Gerhold, C.↗