Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic equivalent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

In-Flight Turbulence Emulation for Fixed-Wing Aircraft using Equivalent Multisine Excitations

A procedure is discussed for designing control-equivalent turbulence input (CETI) excitations to emulate a fixed-wing aircraft response to turbulence while flying through calm air. These excitations are added to the actuator commands to produce the same motion of the aircraft that would have resulted from flying in actual turbulence. Although CETI models are usually shaping filters driven by white noise inputs, the equivalent control inputs in this report were constructed as multisine excitations, which enables mimicking the response to turbulence with arbitrary power spectra, within hardware limitations. Practical aspects of the approach are discussed, such as actuator dynamics, model uncertainty, actual in-flight turbulence, and others. The procedure is demonstrated using a flight dynamics simulation model of a subscale generic jet transport aircraft.

control-equivalent turbulence inputs (CETI)↗
NASA NTRS1991

The effects of interply damping layers on the dynamic response of composite structures

Integrated damping mechanics for composite laminates with constrained interlaminar layers of polymer damping materials are developed. Discrete layer damping mechanics are presented for composite materials with damping layers, in connection with a semi-analytical method for predicting the modal damping in simply-supported specialty composite plates. Several application cases are used to demonstrate the advantages of the method. Damping predictions for graphite-epoxy composite plates of various laminations demonstrate the potential for higher damping than geometrically equivalent aluminum plates. The effects of aspect ratio, damping layer thickness, and fiber volume ratio on static and dynamic characteristics of the composite plate are also investigated.

Saravanos, D. A.↗
DOE OSTI2025

Structural response reconstruction using a system-equivalent singular vector basis

Here, this paper develops a novel method for reconstructing the full-field response of structural dynamic systems using sparse measurements. The singular value decomposition is applied to a frequency response matrix relating the structural response to physical loads, base motion, or modal loads. The left singular vectors form a non-physical reduced basis that can be used for response reconstruction with far fewer sensors than existing methods. The contributions of the singular vectors to measured response are termed singular-vector loads (SVLs) and are used in a regularized Bayesian framework to generate full-field response estimates and confidence intervals. The reconstruction framework is applicable to the estimation of single data records and power spectral densities from multiple records. Reconstruction is successfully performed in configurations where the number of SVLs to identify is less than, equal to, and greater than the number of sensors used for reconstruction. In a simulation featuring a seismically excited shear structure, SVL reconstruction significantly outperforms modal FRF-based reconstruction and successfully estimates full-field responses with as few as two uniaxial accelerometers. SVL reconstruction is further verified in a simulation featuring an acoustically excited cylinder. Finally, response reconstruction and uncertainty quantification are performed on an experimental structure with three shaker inputs and 27 triaxial accelerometer outputs.

42 ENGINEERING↗
DOE OSTI2023

Synthetically non-Hermitian nonlinear wave-like behavior in a topological mechanical metamaterial

Topological mechanical metamaterials have enabled new ways to control stress and deformation propagation. Exemplified by Maxwell lattices, they have been studied extensively using a linearized formalism. Herein, we study a two-dimensional topological Maxwell lattice by exploring its large deformation quasi-static response using geometric numerical simulations and experiments. We observe spatial nonlinear wave-like phenomena such as harmonic generation, localized domain switching, amplification-enhanced frequency conversion, and solitary waves. We further map our linearized, homogenized system to a non-Hermitian, nonreciprocal, one-dimensional wave equation, revealing an equivalence between the deformation fields of two-dimensional topological Maxwell lattices and nonlinear dynamical phenomena in one-dimensional active systems. Our study opens a regime for topological mechanical metamaterials and expands their application potential in areas including adaptive and smart materials and mechanical logic, wherein concepts from nonlinear dynamics may be used to create intricate, tailored spatial deformation and stress fields greatly transcending conventional elasticity.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Saturn - Long-term variation of H2 and CH4 absorptions

Results are presented for observations of various H2 quadrupole lines and CH4 absorption bands in spectra of Saturn obtained with a coude scanner at each apparition since 1969. The data are found to indicate a long-term variation in Saturn's H2 equivalent widths, a seasonal dependence of H2 line strength, and a fairly steady increase in CH4 absorption during the period from 1973 to 1976. A possible correlation between planetary shading and the strength of H2 absorption features is discussed along with seasonal variations in Saturn's NH3 cloud deck and atmospheric models that correspond to the observed H2 equivalent widths. It is suggested that: (1) significant shadowing by the rings may cause dynamical atmospheric activity due to the occurrence of a temperature gradient in the penumbral boundaries of the ring shadow in the planet's upper atmosphere; (2) cooling in the shadow may be a source of a high-altitude CH4 mist; and (3) spreading of this mist over the globe by advective winds would reduce the H2 and CH4 absorptions, as observed.

Trafton, L.↗
NASA NTRS1978

Dynamics of spinning spacecraft during the deployment of flexible boom

The effect of flexibility on the dynamics of a spinning symmetrical spacecraft during the extension (or retraction) of boom-type appendages is treated by modeling the appendages as compound spherical pendula with varying lengths. Both boom stiffness and structural damping are included. For constant boom length the resulting linearized equations of motion contain periodic coefficients involving the spin frequency. A bounded transformation converts this system into a kinematically equivalent one (with only constant coefficients), whose stability is analyzed using the Kelvin-Tait-Chetaev theorem. The dynamics during extension is predicted by numerical simulation of the nonlinear equations.

James, P. K.↗
NASA NTRS1982

Stable and rugged etalon for the Dynamics Explorer Fabry-Perot interferometer. II - Performance

The etalon is shown to remain stable to less than 5-m/sec equivalent wind over one orbit and less than 100 m/sec over several months in orbit. The thermal stability considerations for the highly stable etalon are discussed, including the passive thermal control used in flight. The various physical processes which give rise to drifts in the peak transmission wavelength are quantified, and the kinematic mount used to isolate the etalon from large incremental forces caused by changes in the thermal environment is presented. The performance of the etalon in its flight configuration is evaluated.

Killeen, T. L.↗
NASA NTRS1988

Critical fluid light scattering

The objective is to measure the decay rates of critical density fluctuations in a simple fluid (xenon) very near its liquid-vapor critical point using laser light scattering and photon correlation spectroscopy. Such experiments were severely limited on Earth by the presence of gravity which causes large density gradients in the sample when the compressibility diverges approaching the critical point. The goal is to measure fluctuation decay rates at least two decades closer to the critical point than is possible on earth, with a resolution of 3 microK. This will require loading the sample to 0.1 percent of the critical density and taking data as close as 100 microK to the critical temperature. The minimum mission time of 100 hours will allow a complete range of temperature points to be covered, limited by the thermal response of the sample. Other technical problems have to be addressed such as multiple scattering and the effect of wetting layers. The experiment entails measurement of the scattering intensity fluctuation decay rate at two angles for each temperature and simultaneously recording the scattering intensities and sample turbidity (from the transmission). The analyzed intensity and turbidity data gives the correlation length at each temperature and locates the critical temperature. The fluctuation decay rate data from these measurements will provide a severe test of the generalized hydrodynamic theories of transport coefficients in the critical regions. When compared to equivalent data from binary liquid critical mixtures they will test the universality of critical dynamics.

Gammon, Robert W.↗
NASA NTRS1993

Alternative descriptions of wave and particle aspects of the harmonic oscillator

The dynamical properties of the wave and particle aspects of the harmonic oscillator can be studied with the help of the time-dependent Schroedinger equation (SE). Especially the time-dependence of maximum and width of Gaussian wave packet solutions allow to show the evolution and connections of those two complementary aspects. The investigation of the relations between the equations describing wave and particle aspects leads to an alternative description of the considered systems. This can be achieved by means of a Newtonian equation for a complex variable in connection with a conservation law for a nonclassical angular momentum-type quantity. With the help of this complex variable, it is also possible to develop a Hamiltonian formalism for the wave aspect contained in the SE, which allows to describe the dynamics of the position and momentum uncertainties. In this case the Hamiltonian function is equivalent to the difference between the mean value of the Hamiltonian operator and the classical Hamiltonian function.

Schuch, Dieter↗
NASA NTRS1998

Study of a Simulation Tool to Determine Achievable Control Dynamics and Control Power Requirements with Perfect Tracking

This paper contains a study of two methods for use in a generic nonlinear simulation tool that could be used to determine achievable control dynamics and control power requirements while performing perfect tracking maneuvers over the entire flight envelope. The two methods are NDI (nonlinear dynamic inversion) and the SOFFT(Stochastic Optimal Feedforward and Feedback Technology) feedforward control structure. Equivalent discrete and continuous SOFFT feedforward controllers have been developed. These equivalent forms clearly show that the closed-loop plant model loop is a plant inversion and is the same as the NDI formulation. The main difference is that the NDI formulation has a closed-loop controller structure whereas SOFFT uses an open-loop command model. Continuous, discrete, and hybrid controller structures have been developed and integrated into the formulation. Linear simulation results show that seven different configurations all give essentially the same response, with the NDI hybrid being slightly different. The SOFFT controller gave better tracking performance compared to the NDI controller when a nonlinear saturation element was added. Future plans include evaluation using a nonlinear simulation.

Ostroff, Aaron J.↗
NASA NTRS2000

A Factorial Data Rate and Dwell Time Experiment in the National Transonic Facility

This report is an introductory tutorial on the application of formal experiment design methods to wind tunnel testing, for the benefit of aeronautical engineers with little formal experiment design training. It also describes the results of a Study to determine whether increases in the sample rate and dwell time of the National Transonic Facility data system Would result in significant changes in force and moment data. Increases in sample rate from 10 samples per second to 50 samples per second were examined, as were changes in dwell time from one second per data point to two seconds. These changes were examined for a representative aircraft model in a range of tunnel operating conditions defined by angles of attack from 0 deg to 3.8 degrees, total pressure from 15.0 psi to 24.1 psi, and Mach numbers from 0.52 to 0.82. No statistically significant effect was associated with the change in sample rate. The change in dwell time from one second to two seconds affected axial force measurements, and to a lesser degree normal force measurements. This dwell effect comprises a "rectification error" caused by incomplete cancellation of the positive and negative elements of certain low frequency dynamic components that are not rejected by the one-Hz low-pass filters of the data system. These low frequency effects may be due to tunnel circuit phenomena and other sources. The magnitude of the dwell effect depends on dynamic pressure, with angle of attack and Mach number influencing the strength of this dependence. An analysis is presented which suggests that the magnitude of the rectification error depends on the ratio of measurement dwell time to the period of the low-frequency dynamics, as well as the amplitude of the dynamics The essential conclusion of this analysis is that extending the dwell time (or, equivalently, replicating short-dwell data points) reduces the rectification error.

DeLoach, R.↗
NASA NTRS2007

Real-Time Data Display

RT-Display is a MATLAB-based data acquisition environment designed to use a variety of commercial off-the-shelf (COTS) hardware to digitize analog signals to a standard data format usable by other post-acquisition data analysis tools. This software presents the acquired data in real time using a variety of signal-processing algorithms. The acquired data is stored in a standard Operator Interactive Signal Processing Software (OISPS) data-formatted file. RT-Display is primarily configured to use the Agilent VXI (or equivalent) data acquisition boards used in such systems as MIDDAS (Multi-channel Integrated Dynamic Data Acquisition System). The software is generalized and deployable in almost any testing environment, without limitations or proprietary configuration for a specific test program or project. With the Agilent hardware configured and in place, users can start the program and, in one step, immediately begin digitizing multiple channels of data. Once the acquisition is completed, data is converted into a common binary format that also can be translated to specific formats used by external analysis software, such as OISPS and PC-Signal (product of AI Signal Research Inc.). RT-Display at the time of this reporting was certified on Agilent hardware capable of acquisition up to 196,608 samples per second. Data signals are presented to the user on-screen simultaneously for 16 channels. Each channel can be viewed individually, with a maximum capability of 160 signal channels (depending on hardware configuration). Current signal presentations include: time data, fast Fourier transforms (FFT), and power spectral density plots (PSD). Additional processing algorithms can be easily incorporated into this environment.

Pedings, Marc↗
NASA NTRS2012

Equivalent Source Method Applied to Launch Acoustic Simulations

Aeroacoustic simulations of the launch environment are described. A hybrid computational fluid dynamics (CFD)/computational aeroacoustic (CAA) approach is developed in order to accurately and efficiently predict the sound pressure level spectrum on the launch vehicle and surrounding structures. The high-fidelity CFD code LAVA (Launch Ascent and Vehicle Analysis), is used to generate pressure time history at select locations in the flow field. A 3D exterior Helmholtz solver is then used to iteratively determine a set of monopole sources which mimic the noise generating mechanisms identified by the CFD solver. The acoustic pressure field generated from the Helmholtz solver is then used to evaluate the sound pressure levels.

Housman, Jeffrey A.↗
NASA NTRS2023

Remote Sensing of Dissolved Organic Carbon (DOC) Stocks, Fluxes and Transformations Along the Land-Ocean Aquatic Continuum: Advances, Challenges, and Opportunities

From stream headwaters to the deep ocean, dissolved organic carbon (DOC) is ubiquitous across the world’s aquatic systems, where it fulfills important biogeochemical and ecological functions. Importantly, DOC is a dynamic component of the carbon cycle and represents a global reservoir (mass of carbon) equivalent in size to the atmospheric CO 2 pool. The mobilization, transport, and transformations of DOC along the land-ocean aquatic continuum biogeochemically connect terrestrial landscapes, freshwater and marine ecosystems, and the atmosphere. As a result, DOC budgets are vulnerable to climate- and human-driven changes. Having the ability to quantify DOC stocks, fluxes, and transformations consistently and accurately in aquatic systems is therefore critical to our understanding of DOC’s functions in the environment and of their susceptibility to change. In recent years, optical techniques and synoptic earth observations have opened new doors to achieve this objective on a global scale. In this review, we explore how in situ measurements, earth observations, and the models they inform have facilitated the large-scale quantification of DOC stocks, fluxes, and transformations along the land-ocean aquatic continuum and how they have helped shape our current understanding of the global DOC cycle. The review also explores the limitations and challenges we still face today, and discusses how upcoming and future sensors are expected to provide new insights into our understanding of the global DOC cycle.

Dissolved organic carbon↗
NASA NTRS2016

Aircraft Fault Detection Using Real-Time Frequency Response Estimation

A real-time method for estimating time-varying aircraft frequency responses from input and output measurements was demonstrated. The Bat-4 subscale airplane was used with NASA Langley Research Center's AirSTAR unmanned aerial flight test facility to conduct flight tests and collect data for dynamic modeling. Orthogonal phase-optimized multisine inputs, summed with pilot stick and pedal inputs, were used to excite the responses. The aircraft was tested in its normal configuration and with emulated failures, which included a stuck left ruddervator and an increased command path latency. No prior knowledge of a dynamic model was used or available for the estimation. The longitudinal short period dynamics were investigated in this work. Time-varying frequency responses and stability margins were tracked well using a 20 second sliding window of data, as compared to a post-flight analysis using output error parameter estimation and a low-order equivalent system model. This method could be used in a real-time fault detection system, or for other applications of dynamic modeling such as real-time verification of stability margins during envelope expansion tests.

Grauer, Jared A.↗
NASA NTRS1995

Paths and patterns: the biology and physics of swimming bacterial populations

The velocity distribution of swimming micro-organisms depends on directional cues supplied by the environment. Directional swimming within a bounded space results in the accumulation of organisms near one or more surfaces. Gravity, gradients of chemical concentration and illumination affect the motile behaviour of individual swimmers. Concentrated populations of organisms scatter and absorb light or consume molecules, such as oxygen. When supply is one-sided, consumption creates gradients; the presence of the population alters the intensity and the symmetry of the environmental cues. Patterns of cues interact dynamically with patterns of the consumer population. In suspensions, spatial variations in the concentration of organisms are equivalent to variations of mean mass density of the fluid. When organisms accumulate in one region whilst moving away from another region, the force of gravity causes convection that translocates both organisms and dissolved substances. The geometry of the resulting concentration-convection patterns has features that are remarkably reproducible. Of interest for biology are (1) the long-range organisation achieved by organisms that do not communicate, and (2) that the entire system, consisting of fluid, cells, directional supply of consumables, boundaries and gravity, generates a dynamic that improves the organisms' habitat by enhancing transport and mixing. Velocity distributions of the bacterium Bacillus subtilis have been measured within the milieu of the spatially and temporally varying oxygen concentration which they themselves create. These distributions of swimming speed and direction are the fundamental ingredients required for a quantitative mathematical treatment of the patterns. The quantitative measurement of swimming behaviour also contributes to our understanding of aerotaxis of individual cells.

Non-NASA Center↗
DOE OSTI2025

Emulation of quantum correlations by classical dynamics in a spin-$\frac{1}{2}$ Heisenberg chain

We simulate the dynamical spin structure factor (DSSF) 𝒮⁡(𝑞,𝜔) of the spin-1/2 Heisenberg antiferromagnetic chain using classical simulations. By employing Landau-Lifshitz Dynamics, we emulate quantum correlations through temperature-dependent corrections, including rescaling of magnetic dipoles and renormalization of exchange interactions. Here, our results closely match Quantum Monte-Carlo calculations for 𝑘 B⁢ 𝑇/𝐽≳1, extending the applicability of classical dynamics to the challenging case of gapless excitations. At higher temperatures, our simulations comply with general predictions for uncorrelated paramagnetic fluctuations in the infinite temperature limit. Entanglement witnesses derived from the quantum-equivalent DSSF act as sensitive diagnostics for the quantum-to-classical crossover. Their reliability stems from their dependence on spectral features alone, enabling classical dynamics to emulate quantum thresholds without genuine entanglement. This framework also reproduces transverse spin correlations in finite magnetic fields, in agreement with quantum simulations. Together, our results establish quantum-corrected classical dynamics as a scalable and predictive tool for interpreting scattering experiments and exploring quantum correlations in strongly correlated spin systems.

Inelastic neutron scattering↗
NASA NTRS1978

Design, development, fabrication and delivery of register and multiplexer units

Several approaches for implementing the register and multiplexer unit into two CMOS monolithic chip types were evaluated. The CMOS standard cell array technique was selected and implemented. Using this design automation technology, two LSI CMOS arrays were designed, fabricated, packaged, and tested for proper static, functional, and dynamic operation. One of the chip types, multiplexer register type 1, is fabricated on a 0.143 x 0.123 inch chip. It uses nine standard cell types for a total of 54 standard cells. This involves more than 350 transistors and has the functional equivalent of 111 gates. The second chip, multiplexer register type 2, is housed on a 0.12 x 0.12 inch die. It uses 13 standard cell types, for a total of 42 standard cells. It contains more than 300 transistors, the functional equivalent of 112 gates. All of the hermetically sealed units were initially screened for proper functional operation. The static leakage and the dynamic leakage were measured. Dynamic measurements were made and recorded. At 10 V, 14 megabit shifting rates were measured on multiplexer register type 1. At 5 V these units shifted data at a 6.6 MHz rate. The units were designed to operate over the 3 to 15 V operating range and over a temperature range of -55 to 125 C.

Feller, A.↗