Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Cs retention and diffusion in C-S-H at different Ca/Si ratio

Cement and concrete are commonly used in the construction of repository sites for radioactive wastes. The correct isolation of those contaminants requires good adsorption and low diffusion rates. Both parameters are highly affected by many factors, such as pH, temperature or composition. The large variability of experimental conditions and formulations makes it extraordinarily difficult to tackle the influence of each of them independently in experimental samples. To this effect, molecular dynamics simulations have been employed in this study to investigate the role of the composition in the capacity to retain Cs and diffusivity of these ions in calcium silicate hydrate (C-S-H) gel pores. The results indicate that the adsorption of Cs ions is worsened at high Ca/Si ratios due to a lower interaction of the cations with the C-S-H surface, while hydrophilicity of the C-S-H nanopore rises, resulting in higher long-range ordering and lower diffusion coefficients of Cs ions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Solid-State Hydroxide Ion Conductivity in Silver(I) Oxide, Ag 2 O

Silver (I) oxide, Ag 2 O, precipitated as microcrystals by combining aqueous silver(I) nitrate and KOH solutions, was found to be a solid-state hydroxide ion conductor with ionic conductivity on the order of 10 -3 S/cm. The proton chemical shifts at 4.87 and -7.35 ppm measured by solid-state 1H-NMR experiments are attributed to water molecules and in-lattice OH - coordinated to silver, respectively. The lack of spinning sidebands around the 4.87 ppm peak indicates rapid reorientation on the NMR timescale, suggesting that the water molecules are adsorbed to the surface of the Ag 2 O crystals. Pulsed field gradient measurements gave similar diffusion coefficients (2 x 10 -7 cm 2 /s at 298K) for all three proton environments indicating chemical exchange between sites on the millisecond timescale. The activation energy for OH - diffusion measured by NMR (0.18 eV) was comparable to that obtained by conductivity measurements and density functional theory (DFT) electronic structure calculations. Furthermore, the calculated Pourbaix diagram of Ag 2 O is consistent with the slightly lower sample density observed in He pycnometry and thermogravimetric measurements.

25 ENERGY STORAGE↗
DOE OSTI2022

Robust estimation of charge carrier diffusivity using transient photoluminescence microscopy

Transient microscopy has emerged as a powerful tool for imaging the diffusion of excitons and free charge carriers in optoelectronic materials. In many excitonic materials, extraction of diffusion coefficients can be simplified because of the linear relationship between signal intensity and local excited state population. However, in materials where transport is dominated by free charge carriers, extracting diffusivities accurately from multidimensional data is complicated by the nonlinear dependence of the measured signal on the local charge carrier density. To obtain accurate estimates of charge carrier diffusivity from transient microscopy data, statistically robust fitting algorithms coupled to efficient 3D numerical solvers that faithfully relate local carrier dynamics to raw experimental measurables are sometimes needed. Here, we provide a detailed numerical framework for modeling the spatiotemporal dynamics of free charge carriers in bulk semiconductors with significant solving speed reduction and for simulating the corresponding transient photoluminescence microscopy data. To demonstrate the utility of this approach, we apply a fitting algorithm using a Markov chain Monte Carlo sampler to experimental data on bulk CdS and methylammonium lead bromide (MAPbBr 3 ) crystals. Parameter analyses reveal that transient photoluminescence microscopy can be used to obtain robust estimates of charge carrier diffusivities in optoelectronic materials of interest, but that other experimental approaches should be used for obtaining carrier recombination constants. Additionally, simplifications can be made to the fitting model depending on the experimental conditions and material systems studied. Our open-source simulation code and fitting algorithm are made freely available to the scientific community.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transport coefficients of the quark-gluon plasma at the critical point and across the first-order line

A bottom-up Einstein-Maxwell-dilaton holographic model is used to compute, for the first time, the behavior of several transport coefficients of the hot and baryon-rich strongly coupled quark-gluon plasma at the critical point and also across the first-order phase transition line in the phase diagram. The observables under study are the shear and bulk viscosities, the baryon and thermal conductivities, the baryon diffusion, the jet quenching parameter $\hat{q}$, as well as the heavy-quark drag force and the Langevin diffusion coefficients. These calculations provide a phenomenologically promising estimate for these coefficients, given that our model quantitatively reproduces lattice QCD thermodynamics results, both at zero and finite baryon density, besides naturally incorporating the nearly perfect fluidity of the quark-gluon plasma. Here we find that the diffusion of baryon charge, and also the shear and bulk viscosities, are suppressed with increasing baryon density, indicating that the medium becomes even closer to perfect fluidity at large densities. On the other hand, the jet quenching parameter and the heavy-quark momentum diffusion are enhanced with increasing density. The observables display a discontinuity gap when crossing the first-order phase transition line, while developing an infinite slope at the critical point. The transition temperatures associated with different transport coefficients differ in the crossover region but are found to converge at the critical point.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Improved lithium storage capacity and high rate capability of nitrogen-doped graphite-like electrode materials prepared from thermal pyrolysis of graphene quantum dots

Adopting a solid-phase microwave-assisted technique followed by thermal pyrolysis of N-functionalized graphene quantum dots, novel nitrogen-doped graphite-like (NGL) electrode materials were synthesized in this work and served as the anode for Li-ion batteries. The NGL anode demonstrated reversible capacity of 530 mAh g -1 at 0.1C, superior rate capability at high C rate operation (420 mAh g -1 at 5C), remarkable initial coulombic efficiency (>95.7%), and excellent cyclic stability along with high efficiency (>99.1%) during entire cycling. The NGL anode nanostructure enables improved lithium ion mobility and reversible Li + storage during cycling. The analysis of the Ragone plots revealed that the specific energy of NGL anode reaches to ca. 840 Wh kg -1 at the power density of 4200 W kg -1 . The diffusion coefficient of Li ions was measured as 1.69 × 10 -9 cm 2 s -1 for the NGL anode material, substantially improving over commonly used graphite electrodes (15–26 times higher Li + diffusivity). The high-rate cyclability as well as the cyclic stability of the NGL anodes were also confirmed via long-term cycling of full pouch cells assembled with ternary cathode and NGL anode. The robust design of the NGL anode materials introduced in this work, paves the way for designing next-generation lithium-ion batteries operating at ultra-high C rates.

25 ENERGY STORAGE↗
DOE OSTI2021

Kinetics and transport of hydrogen in graphite at high temperature and the effects of oxidation, irradiation and isotopics

The kinetics of uptake and desorption impact the performance of graphite as a vector for tritium in high-temperature fission reactors and in the blanket of fusion reactors. Graphite components in these reactors are exposed to temperatures > 500 °C and H 2 partial pressures of few Pa and desorption temperatures are limited to < 1600 °C; limited data is available at these conditions. Here we review the mechanisms for uptake in, transport and desorption of hydrogen from graphite at high temperature, compiling data on uptake rates, diffusion coefficients and activation energies and providing a discussion of the impact of irradiation, pre-oxidation and isotope. At FHR conditions, trapping impacts uptake rates, leading to a reduction in apparent diffusivity by 35 to 80% compared to higher partial-pressure uptake. Timelines for desorption are not clearly defined; extrapolating from available data, at 1150 °C desorbing 80% of tritium uptaken at FHR conditions may take from 100 to 10,000 h.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Effect of Solvent on the Local Structure, Dynamics, and Vibrational Density of States in Sn-BEA Zeolite

Lewis acid zeolites are attractive catalysts for epoxidation and biomass valorization, as they are highly active and selective in the liquid phase and can operate at or near ambient conditions. While a rich experimental literature exists on liquid-phase Lewis acid zeolite catalysis, our understanding of the molecular organization and solvent dynamics in the vicinity of Lewis acid sites with differing metal site speciation remains limited. In this work, we investigate the molecular coordination and diffusion of two common solvents (methanol and water) around the closed and open Sn-BEA zeolite active sites using molecular dynamics simulations with a machine-learned interatomic potential trained on ab initio molecular dynamics trajectories. Molecular dynamics simulations reveal that introducing active sites significantly enhances local order in the first and second solvation shells compared to the pure silica case. For methanol, both closed and open active sites are singly coordinated, while more than two water molecules coordinate the open site. In contrast to methanol, we observed that water molecules dissociate, leading to the formation of additional Sn-OH and silanol groups away from the active site. The diffusion coefficients of water and methanol are functions of the solvent population in the pore. Here, our work provides insights into how active site speciation in Lewis acid zeolites affects solvent coordination, diffusion, and vibrational signature. This information is foundational for catalyst design and optimization of liquid-phase catalytic processes in zeolites. It also demonstrates the suitability of machine-learned interatomic potentials for modeling reactive systems, enabling sufficiently long trajectories for appropriate statistical averaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Carbon nanotube porin diffusion in mixed composition supported lipid bilayers

Carbon nanotube porins (CNTPs), short pieces of carbon nanotubes capable of self-inserting into a lipid bilayer, represent a simplified model of biological membrane channels. We have used high-speed atomic force microscopy (HS-AFM) and all-atom molecular dynamics (MD) simulations to study the behavior of CNTPs in a mixed lipid membrane consisting of DOPC lipid with a variable percentage of DMPC lipid added to it. HS-AFM data reveal that the CNTPs undergo diffusive motion in the bilayer plane. Motion trajectories extracted from the HS-AFM movies indicate that CNTPs exhibit diffusion coefficient values broadly similar to values reported for membrane proteins in supported lipid bilayers. The data also indicate that increasing the percentage of DMPC leads to a marked slowing of CNTP diffusion. MD simulations reveal a CNTP-lipid assembly that diffuses in the membrane and show trends that are consistent with the experimental observations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Hydrodynamics of simply spinning black holes & hydrodynamics for spinning quantum fluids

We find hydrodynamic behavior in large simply spinning five-dimensional Anti-de Sitter black holes. These are dual to spinning quantum fluids through the AdS/CFT correspondence constructed from string theory. Due to the spatial anisotropy introduced by the angular momentum, hydrodynamic transport coefficients are split into groups longitudinal or transverse to the angular momentum, and aligned or anti-aligned with it. Analytic expressions are provided for the two shear viscosities, the longitudinal momentum diffusion coefficient, two speeds of sound, and two sound attenuation coefficients. Known relations between these coefficients are generalized to include dependence on angular momentum. The shear viscosity to entropy density ratio varies between zero and 1/(4π) depending on the direction of the shear. These results can be applied to heavy ion collisions, in which the most vortical fluid was reported recently. In passing, we show that large simply spinning five-dimensional Myers-Perry black holes are perturbatively stable for all angular momenta below extremality.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Measuring Electron Diffusion and Constraining the Neutral Current $\pi^0$ Background for Single-Photon Events in MicroBooNE

Liquid Argon Time Projection Chambers (LArTPCs) are a rising technology in the field of experimental neutrino physics. LArTPCs use ionization electrons and scintillation light to reconstruct neutrino interactions with exceptional calorimetric and position resolution capabilities. Here, I present two analyses conducted in the MicroBooNE LArTPC at Fermilab: a measurement of the longitudinal electron diffusion coefficient, $D_L$, in the MicroBooNE detector and a constraint of the systematic uncertainty on MicroBooNE's single-photon analysis due to the dominant neutral current (NC) \piz{} background. Longitudinal electron diffusion modifies the spatial and timing resolution of the detector, and measuring it will help correct for these effects. Furthermore, current measurements of $D_L$ in liquid argon are sparse and in tension with one another, making the MicroBooNE measurement especially valuable. We report a measurement of $3.74^{+0.28}_{-0.29}$ cm$^2$/s. MicroBooNE is searchin g for si ngle-photon events as a potential explanation for the MiniBooNE low-energy excess (LEE) of electron neutrino-like events, which has been interpreted as evidence for low-mass sterile neutrinos. However, this search is overwhelmed by a large NC \piz{} background. By performing a sideband selection of NC \piz{} events, we apply a data-driven rate constraint to the single-photon analysis to reduce the systematic uncertainties. At present, this constraint improves the single-photon analysis' median sensitivity to the LEE-like signal from 0.9$\sigma$ to $1.5\sigma$. This sensitivity is expected to improve significantly as more data become available. Both of these measurements will not only benefit MicroBooNE, but also inform future LArTPC experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Sodium diffusion in heterogeneous porous media: Connecting laboratory experiments and simulations

Sodium has been suggested as a tracer for brine in reservoir formations where a significant amount of sodium ion is found mainly in the aqueous phase. Fortunately, the most abundant sodium isotope, 23 Na, is Nuclear Magnetic Resonance (NMR) active, making it possible to study the structure and dynamical properties of both bulk and pore confined fluid systems. We investigated the diffusion of key dissolved sodium species in bulk solution and porous media as a function of composition, ionic strength, and permeability of the carbonate samples using NMR relaxometry and pulsed-field gradient (PFG) NMR techniques. We use Indiana limestone as an example of natural porous media and water as a freely diffusible tracer and carrier. We demonstrate apparent diffusion measurement of sodium based on changes in spin–spin relaxation time (T 2 ) signal in pore confinement. The diffusion rate of sodium decreases with increasing counter-ion size. This effect is greater at higher ionic strengths and lower chemical potentials in porous media. The reactive transport code, CrunchFlow, was used to complement the NMR experiments to simulate diffusion behavior in porous media. Combining these two methods provides a powerful approach to estimating effective diffusion coefficients in heterogeneous matrices. The modeling considers the influence of physical properties (porosity and tortuosity) and chemical properties (geochemical composition and chemical gradients). The results presented in this work highlight the advantage of measuring apparent diffusivity using NMR T 2 relaxometry in conjunction with numerical simulation to derive effective diffusivity and the corresponding matrix properties (i.e., tortuosity) of the system.

58 GEOSCIENCES↗
DOE OSTI2023

Hindered segmental dynamics in associative protein hydrogels studied by neutron spin-echo spectroscopy

Transient binding between associating macromolecules can cause qualitative changes to chain dynamics, including modes of conformational relaxation and diffusion, through tethering effects imparted by long-range connectivity. Here, in this work, the role of binding on short-time segmental dynamics in associative polymer gels is investigated by neutron spin-echo (NSE) measurements on a class of model artificial coiled-coil proteins with a systematically varied architecture, probing timescales of 0.1–130 ns, and length scales close to the molecular radius of gyration. The results illustrate effects of transient cross-linking on chain dynamics on different timescales, manifested in changes in segmental relaxation behavior with variations in strand length, chain concentration, and sticker distribution (endblock- vs midblock-functionalized). In all gels, a short-time cooperative diffusion mode is seen over all wave vectors, analogous to a semidilute solution, with no transitions seen at any known structural length scale. However, the diffusion coefficients are found to decrease with increasing junction density across all gels, with the strand length and number of stickers per chain in each gel appearing to play a relatively minor role. The slowing of cooperative diffusion with junction density contrasts with classical predictions of a greater restoring force for fluctuation dissipation due to the increased elasticity, suggesting additional effects of the coiled-coil junctions such as an enhancement in local viscosity that slows dynamics. Notably, the relaxation rates for all gels can be rescaled by the interjunction spacing inferred from small-angle neutron scattering, where they collapse onto a master curve suggestive of self-similar dynamics even in networks with different strand lengths and chain architectures. On long timescales (but shorter than the junction exchange time), a slowing of network relaxation is observed, resulting in a nondecaying plateau in the spin-echo amplitude attributed to a freezing of chain dynamics due to tethering. A characteristic length scale corresponding to the extent of dynamic fluctuations is estimated for each gel, which appears to be smaller than the interjunction spacing but similar to the correlation blob size of the overlapping strands. The results indicate an important role of transient binding on molecular-scale dynamics in associative polymer gels, even on timescales shorter than the junction exchange time, in addition to its effects on long-range self-diffusion previously observed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of convective transport in edge and scrape-off-layer plasmas of ADITYA-U tokamak

The 2-D edge plasma fluid transport code, UEDGE has been used to simulate the edge and scrape-off layer regions of circular limiter plasmas of ADITYA-U. The computational mesh defining the limiter geometry of ADITYA-U has been introduced in the UEDGE code through an in-house developed routine. It has successfully been integrated with the UEDGE code and the measured radial profile of electron density (n e ) in the edge region is modelled using the simulations. The plasma discharge for the present study has plasma current I P ~ 130 kA, duration ~ 150 ms, chord-averaged electron density ~ 1.3 x 10 19 m -3 , and central electron temperature ~ 270 eV has been observed. The maximum toroidal magnetic field is ~ 1.2 T. It has been found that an inward convective velocity, v conv ~ 1.5 m/s is required in addition to the constant perpendicular diffusion coefficient, D ⟂ ~ 0.2 m 2 /s to adequately match the measured n e profile in typical discharges of ADITYA-U. The value of D ⟂ ~ 0.2 m 2 /s is found to lie between the estimated neoclassical diffusivity and Bohm diffusivity.

Physics - Plasma physics↗
DOE OSTI2021

Temperature and salt controlled tuning of protein clusters

The formation of molecular assemblies in protein solutions is of strong interest both from a fundamental viewpoint and for biomedical applications. While ordered and desired protein assemblies are indispensable for some biological functions, undesired protein condensation can induce serious diseases. As a common cofactor, the presence of salt ions is essential for some biological processes involving proteins, and in aqueous suspensions of proteins can also give rise to complex phase diagrams including homogeneous solutions, large aggregates, and dissolution regimes. Here, we systematically study the cluster formation approaching the phase separation in aqueous solutions of the globular protein BSA as a function of temperature (T), the protein concentration (c p ) and the concentrations of the trivalent salts YCl 3 and LaCl 3 (c s ). As an important complement to structural, i.e. time-averaged, techniques we employ a dynamical technique that can detect clusters even when they are transient on the order of a few nanoseconds. By employing incoherent neutron spectroscopy, we unambiguously determine the short-time self-diffusion of the protein clusters depending on c p , c s and T. We determine the cluster size in terms of effective hydrodynamic radii as manifested by the cluster center-of-mass diffusion coefficients D. For both salts, we find a simple functional form D(c p , c s , T) in the parameter range explored. The calculated inter-particle attraction strength, determined from the microscopic and short-time diffusive properties of the samples, increases with salt concentration and temperature in the regime investigated and can be linked to the macroscopic behavior of the samples.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Diffusion-mediated passing of molecular species in linear nanopores constrained by orientational alignment

For diffusion-mediated catalytic conversion reactions in materials with narrow linear nanopores, e.g., mesoporous silica MCM-41, a key parameter is the propensity for product species to be able to pass reactant species and thus to efficiently exit the pore. For elongated species, this can require orientational alignment with the pore axis. In this work, we perform benchmark analyses for such solution-phase systems where one of these species is elongated in order to quantify the dependence of this passing propensity, P, on pore diameter and on the rotational diffusion coefficient, Dr, of the elongated species. In particular, we consider the passing of a spherical and an elongated spherocylindrical shaped species in a cylindrical pore in an implicit solvent, where these species cannot overlap. Passing is mediated by diffusive Brownian motion of these species as described by strongly damped Langevin dynamics. We quantify scaling of P for pore width just above the threshold where passing is sterically blocked, and also reveal a significant decrease in P for lower Dr. We also consider the dependence of P on the aspect ratio of the elongated species and obtain an exact result in the limiting regime of large aspect ratio.

Brownian motion↗
DOE OSTI2021

The Electrochemical Behavior of Tellurium Tetrachloride in LiCl-KCl Eutectic Molten Salt at 450 ºC

Cyclic voltammetry CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy measurements were carried out in 1 and 5 wt% TeCl 4 containing LiCl-KCl eutectic molten salt at 450 °C using tungsten and glassy carbon as working electrodes. Reduction of Te(IV) to Te(0) occurred in three steps at potentials more negative than -0.4 V Ag/AgCl . The Te(0) was further reduced to Te 2- at more negative potentials. Formation of Te 2- was observed at potentials more negative than -2.2 V Ag/AgCl . Diffusivities of Te 4+ , Te 2+ , and Te 2- and their formal potentials were estimated from the CV data. The diffusion coefficients of Te 4+ , Te 2+ and Te 2- were 0.9 × 10 -5 , 3.8 × 10 -5 , and 1.5 × 10 -5 cm 2 s -1 , respectively in the 1 wt% TeCl 4 containing LiCl-KCl molten salt. The diffusivity of Te species generally decreased with increase in the concentration of TeCl 4 .

Electrochemistry↗
DOE OSTI2023

Acceleration of Pd-V intermetallic diffusion by hydrogen

Vanadium-based membranes have great potential for hydrogen purification due to their perfect selectivity, high permeability, and relatively low cost. With appropriate surface cleaning, V efficiently permeates hydrogen at elevated temperature, but performance declines due to its affinity to absorb impurities. Here, the application of palladium thin films maintains a clean surface that catalyzes hydrogen dissociation and recombination. Hydrogen permeation in Pd-V-Pd membranes initially reach theoretical permeability, but declines due to Pd-V interdiffusion. The objective of this work was to quantify the intermetallic diffusion process as a function of temperature and ambient. Pd-V composites were subjected to various annealing treatments and characterized using Auger electron spectroscopy, X-ray diffraction, and energy dispersive X-ray spectroscopy, as well as correlated to measurements of membrane permeability. In an inert environment Pd-V interdiffusion was observable as low as 300 °C, and the diffusion coefficient had an activation energy of 44 kJ/mol. Furthermore, the presence of hydrogen at partial pressures > 10 kPa accelerated interdiffusion six-fold at T = 400 °C. Membrane performance degraded with an activation energy 75 kJ/mol, suggesting that intermetallic diffusion leads to both a loss of catalytic activity and as well as degradation of bulk permeability. These findings provide a baseline for evaluating hydrogen permeable interdiffusion barriers to overcome these challenges.

08 HYDROGEN↗
DOE OSTI2021

Bulk and surface diffusion of neodymium in alpha-uranium: Ab initio calculations and kinetic Monte Carlo simulations

A fundamental understanding of lanthanide transport in metallic fuels is critical for high fidelity modeling of the fuel-cladding chemical interaction (FCCI) phenomenon, which can lead to the formation of brittle intermetallic compounds and premature failure of the cladding. Here we report a combined ab initio density functional theory (DFT) and kinetic Monte Carlo (KMC) study of the bulk diffusivity of Nd in α-U, fully taking into account the effect of radiation enhanced diffusion. In this work, the vacancy mechanism is considered to be the dominant mechanism for the bulk diffusion of Nd since a Nd interstitial is found to be intrinsically unstable in α-U. The surface diffusivity of a Nd adatom on α-U (001) surface has been further predicted using KMC simulations parameterized by DFT calculations. The present study suggests that Nd transport via the surface diffusion mechanism can be many orders of magnitude faster than bulk diffusion. Furthermore, the results from the present lower length scale study can be used to inform mesoscale phase-field simulations to determine the effective diffusion coefficient of Nd through α-U with a porous microstructure.

36 MATERIALS SCIENCE↗