Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Drying Wet Stored and Corroded Magnox Fuel for Interim Dry Storage - 20187

To investigate the feasibility of drying corroded Magnesium alloy clad nuclear fuel, the corrosion products of inactive and unirradiated Magnox simulant dry corrosion product and dried corroded Magnox sludge were characterised by X-ray diffraction and thermogravimetric analysis. XRD identified brucite in the dried corrosion product and both brucite and hydromagnesite in the sludge. TGA identified mass loss on dehydration of ∼9.1% up to 250 deg. C and 27.9% from dehydroxylation up to 440 deg. C, with total mass loss of 41.9% up to 800 deg. C for the dried corrosion product. The sludge TGA showed 8.3% mass loss up to 250 deg. C from dehydration, 7.5% up to 330 deg. C from dehydroxylation and 31.4% mass loss up to 47.2% for decarbonation, with total mass loss of 49.2% up to 800 deg. C. Water removal up to 1.8 g was performed by cold vacuum drying (40 deg. C-120 deg. C) on a ≅14.8 g (wet) corroded Magnox sample. The process was monitored by observing pressure, dew point, temperature and gas flow changes supported by measuring the sample mass loss as water is removed. From these tests, it was observed that the dried corroded Magnox displayed some hygroscopic capacity which has implications for water retention following vacuum drying and the length of exposure required to achieve the desired dryness. Whilst at higher temperatures the water was removed faster, the increased temperature also risks the fuel cladding undergoing unwanted chemical reactions with the residual water during the process. However, at lower temperatures the achievable levels of dryness were reduced. Therefore, from these observations this work has identified that there is a temperature balance that may be necessary to optimise the drying process with respect to allowing the greatest level of dryness whilst restricting unwanted chemical reactions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Materials corrosion of high temperature alloys immersed in 600°C binary nitrate salt

Thirteen high temperature alloys were immersion tested in a 60/40 binary nitrate salt. Samples were interval tested up to 3000 hours at 600ÀC with air as the ullage gas. Chemical analysis of the molten salt indicated lower nitrite concentrations present in the salt, as predicted by the equilibrium equation. Corrosion rates were generally low for all alloys. Corrosion products were identified using x-ray diffraction and electron microprobe analysis. Fe-Cr based alloys tended to form mixtures of sodium and iron oxides, while Fe-Ni/Cr alloys had similar corrosion products plus oxides of nickel and chromium. Nickel based alloys primarily formed NiO, with chromium oxides near the oxide/base alloy interface. In625 exhibited similar corrosion performance in relation to previous tests, lending confidence in comparisons between past and present experiments. HA230 exhibited internal oxidation that consisted of a nickel/chromium oxide. Alloys with significant aluminum alloying tended to exhibit superior performance, due formation of a thin alumina layer. Soluble corrosion products of chromium, molybdenum, and tungsten were also formed and are thought to be a significant factor in alloy performance.

Kruizenga, Alan Michael↗

Polarization effects in the central exclusive {chi}{sub c} production and the J/{psi} angular distributions

We discuss exclusive elastic double diffractive axial-vector {chi}{sub c}(1{sup +}) and tensor {chi}{sub c}(2{sup +}) mesons production for different meson polarizations in proton-(anti)proton collisions at the Tevatron energy. The amplitude for the process is derived within the k{sub t}-factorization approach using unintegrated gluon distributions. Differential cross sections for different {chi}{sub c} polarizations are calculated. Angular distributions of J/{psi} meson from the radiative {chi}{sub c}(1{sup +},2{sup +}) decays are derived. Prospects for experimental selection of different spin states of {chi}{sub c} mesons are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Laser-Induced Thermal Decomposition of Uranium Coordination Compounds with Non-oxidic Ligands to Produce Nitride and Carbide Materials

The production of ceramics from uranium coordination compounds can be achieved through thermal processing if an excess amount of the desired atoms (i.e., C or N), or reactive gaseous products (e.g., methane or nitrogen oxide) is made available to the reactive uranium metal core via decomposition/fragmentation of the surrounding ligand groups. Here, computational thermodynamic approaches were utilized to identify the temperatures necessary to produce uranium metal from some starting compounds—UI 4 (TMEDA) 2 , UCl 4 (TMEDA) 2 , UCl 3 (pyridine) x , and UI 3 (pyridine) 4 . Experimentally, precursors were irradiated by a laser under various gaseous environments (argon, nitrogen, and methane) creating extreme reaction conditions (i.e., fast heating, high temperature profile >2000 °C, and rapid cooling). Despite the fast dynamics associated with laser irradiation, the central uranium atom reacted with the thermal decomposition products of the ligands yielding uranium ceramics. Residual gas analysis identified vaporized products from the laser irradiation, and the final ceramic products were characterized by powder X-ray diffraction. The composition of the uranium precursor as well as the gaseous environment had a direct impact on the production of the final phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variable hydrazine coordination modes from reactions with dichlorotris(triphenylphosphine)ruthenium(II)

The reactivity of the prominent ruthenium(II) catalyst and precursor, RuCl 2 (PPh 3 ) 3 , was explored with hydrazine and its derivatives. The reactions produced 6-coordinate ruthenium(II) products that bond with the hydrazine moiety in bridging (NH 2 NH 2 or NH 2 NHMe), end-on (NH 2 NHMe, NH 2 NHPh, or NH 2 NMe 2 ), or side-on (NH 2 NMe 2 ) fashions. The products have been characterized by single crystal X-ray diffraction and 31 P NMR spectroscopy. With NH 2 NH 2 , the dimeric product, [RuCl 2 (PPh 3 ) 2 ] 2 ($μ$-N 2 H 4 ) 2 , was formed under all conditions used. For other hydrazines, the reaction stoichiometry governed product formation to yield either bimetallic or monomeric products. When the RuCl 2 (PPh 3 ) 3 to hydrazine derivative ratio was 1:1 or lower, bimetallic complexes were formed while a 1:2 ratio produced monomeric compounds. The exception to the latter occurs with the production of the monomeric compound, RuCl 2 (PPh 3 ) 2 ($η$ 2 -NH 2 NMe 2 ), that forms employing a 1:1 ratio. In addition to stoichiometry, steric factors and hydrogen bonding played a significant role in dictating the bonding mode of hydrazines. The bimetallic complexes were further reacted to yield the corresponding monomeric products, adopting the form RuCl 2 (PPh 3 ) 2 (L) 2 (L = NH 2 NHMe, NH 2 NHPh, or NH 2 NMe 2 ). Reactions utilizing less than a 1:2 ratio of RuCl 2 (PPh 3 ) 3 to NH 2 NMe 2 produced a mixture of products that appear to be in equilibrium. In conclusion, FT calculations were performed to gain insight into the reaction energetics and molecular stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing the degradation of [(UO 2 F 2 )(H 2 O)] 7 4H 2 O under humid conditions

Under humid conditions, uranyl fluoride ([(UO 2 F 2 )(H 2 O)] 7 ·4H 2 O) undergoes a loss of fluorine to form a uranyl hydroxide species, which can be further hydrated to form a uranyl peroxide species. X-ray diffraction data of the uranyl peroxide product is presented for the first time. In addition, the temperature and humidity conditions under which these reactions occur have been clarified by a 220-day experiment using microRaman spectroscopy to track chemical changes in individual particles of uranyl fluoride. At 25 and 35 ° C, uranyl fluoride is found to be stable at 32% relative humidity but not stable at and above 59% relative humidity. We show that water vapor pressure is the driving factor in formation of both the hydroxide and peroxide products. The kinetics of the transformation from uranyl fluoride into uranyl hydroxide is consistent with a denucleation reaction following the absorption of water molecules.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Uniform NaYF{sub 4}:Yb, Tm hexagonal submicroplates: Controlled synthesis and enhanced UV and blue upconversion luminescence

Graphical abstract: Display Omitted Highlights: ► β-NaYF{sub 4} phosphors as an excellent upconversion materials. ► Oleic acid can promote the transformation of α → β phase NaYF{sub 4}. ► The shape and size of β-NaYF{sub 4} submicroplate can be tuned by reactant concentration. ► Enhanced UV and blue peaks can be obtained by varying Yb{sup 3+} and Tm{sup 3+} concentration. -- Abstract: We reported the preparation of cubic (α-) and hexagonal (β-) NaYF{sub 4} particles in high boiling organic solvents 1-octadecene (ODE) and oleic acid (OA), through a thermal decomposition synthesis route. The as-prepared products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), photoluminescence (PL) spectra. By tuning the OA/ODE volume ratio and reactant concentration, we could manipulate the morphology, size, and crystal structure of the products. Highly uniform β-NaYF{sub 4} submicroplates were obtained from α-NaYF{sub 4} nanoparticles by increasing the OA/ODE volume ratio, while the phase kept unchanged with the increasing of reactant concentration. Upconversion emissions from UV to NIR emissions were observed in β-NaYF{sub 4} hexagonal submicroplates under 980 nm laser diode excitation. In addition, the enhanced UV and blue upconversion emissions were obtained by varying Tm{sup 3+} and Yb{sup 3+} ion concentration.

36 MATERIALS SCIENCE↗

Boron Carbide Synthesis in Low-Voltage DC Electric Arc Initiated in Open Air

We describe a method of obtaining ultrafine boron carbide (B{sub 13}C{sub 2}) powder using the effect of a dc electric arc on a mixture of initial reactants containing carbon and boron. A peculiarity of the proposed method is that it can be implemented using arc discharge operating in open air without any vacuum equipment and protective inert gas atmosphere. X-ray diffraction data showed that the synthesized product in the general case contained three crystalline phases: boron carbide (B{sub 13}C{sub 2}), graphite (C), and boron oxide (B{sub 2}O{sub 3}). Electron-microscopic examination showed that the average size of boron carbide particles ranged from ~50 nm to ~2 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystallite, optical and photocatalytic properties of visible-light-driven ZnIn{sub 2}S{sub 4} photocatalysts synthesized via a surfactant-assisted hydrothermal method

A series of ZnIn{sub 2}S{sub 4} photocatalysts were synthesized via a surfactant-assisted hydrothermal method. The products were characterized with X-ray diffraction (XRD), UV-vis-near-IR diffuse reflectance spectra (UV-vis), photoluminescence spectra (PL) and field emission scanning electron microscope (FESEM). The results indicated that the CTAB-assisted ZnIn{sub 2}S{sub 4} product had a wider band gap than the other three ZnIn{sub 2}S{sub 4} products (CPBr-assisted, SDS-assisted and no-surfactant-assisted ZnIn{sub 2}S{sub 4}). The surfactant (especially CTAB) addition would greatly affect the crystal structure (i.e. d(0 0 6) along the c-axis) of ZnIn{sub 2}S{sub 4}. The photocatalytic activities of the as-prepared samples were evaluated by photocatalytic hydrogen production from water under visible light irradiation. The CTAB-assisted ZnIn{sub 2}S{sub 4} product, with quantum yield (420 nm) determined to be 11.9%, had a much higher photocatalytic activity than the other three ZnIn{sub 2}S{sub 4} products in our photocatalytic system. The energy conversion efficiency in the whole visible light region was determined to be 3.1% for the CTAB-assisted ZnIn{sub 2}S{sub 4} photocatalyst.

36 MATERIALS SCIENCE↗

Ionic liquid-assisted preparation of square-shaped Y{sub 2}O{sub 3} nanoplates

Highlights: • Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanosheets were prepared by an ionic liquid-assisted mixed solvothermal route. • Y{sub 2}O{sub 3} nanosheets were obtained after calcining the Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanosheets. • The Y{sub 2}O{sub 3} nanosheets are with length of about 300 nm and thickness of several nanometers. - Abstract: Uniform square-shaped Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanoplates with side length of about 300 nm and thickness of tens of nanometers have been successfully prepared by an ionic liquid-assisted mixed solvothermal route. Y{sub 2}O{sub 3} nanoplates with similar size were obtained after calcining the Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanoplates at 800 °C. The products were analyzed by powder X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution TEM (HRTEM), and electron diffraction (ED). The effects of reaction time, composition of solvents, and the molar ratio of reagents on the morphology of the products have been investigated. The possible formation mechanism of the Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanoplates was also discussed. Y{sub 2}O{sub 3}:Eu{sup 3+} nanoplates were also synthesized and their photoluminescent properties were examined.

36 MATERIALS SCIENCE↗

Photoproduction of J /ψ in non-single-diffractive p+p collisions

Significant enhancements of $ J/\psi $ production at very low transverse momenta were recently observed by the ALICE and STAR collaborations in peripheral hadronic A+A collisions. The anomalous excess points to coherent photon-nucleus interactions in violent hadronic heavy-ion collisions, which were conventionally studied only in ultra-peripheral collisions. Assuming that the coherent photoproduction is the underlying mechanism responsible for the excess observed in peripheral A+A collisions, its contribution in p+p collisions with nuclear overlap, i.e. non-single-diffractive collisions, is of particular interest. In this paper, we perform a calculation of exclusive $ J/\psi $ photoproduction in non-single-diffractive p+p collisions at the RHIC and LHC energies based on the pQCD motivated parametrization using the world-wide experimental data, which could be further employed to improve the precision of the phenomenological calculations for photoproduction in A+A collisions. The differential rapidity and transverse momentum distributions of $ J/\psi $ from photoproduction are presented. In comparison with the $ J/\psi $ production from hadronic interactions, we find that the contribution of photoproduction is negligible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis of polycrystalline chalcopyrite semiconductors by microwave irradiation

Polycrystalline samples of the chalcopyrites CuInS2, CuInSe2, and CuInSSe were prepared from stoichiometric mixtures of the pure elements by microwave irradiation. The reactions were performed in sealed quartz tubes in as few as 3 minutes. The products were analyzed by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray photoelectron spectroscopy. The surface morphology and shape of the particles produced by this method suggest that the products are formed from liquid melts. This method could be applied to the production of bulk chalcopyrite as sources for thin film growth.

Landry, Christopher C.↗

Evidence of anatase intergrowths formed during slow cooling of reduced ilmenite

Controlling the parameters during synthetic rutile production is essential to minimize production costs and ensure final product quality. Powder X-ray diffraction (PXRD) is typically used within the industry to guide process control. This work investigated the source of unusual features observed in the PXRD pattern of a slow-cooled reduced ilmenite (RI), which were not observed for a rapid-cooled RI. For the slow-cooled RI, the 002 peak of M 3 O 5 (anosovite) had disappeared and the intensity of the $ \overline{2}03\ $, 203, 204 and 402 peaks had decreased significantly compared to the pattern for the rapid-cooled RI. Using transmission electron microscopy, selected area electron diffraction (SAED) and pair distribution function (PDF) analysis, the authors attribute these features to M 3 O 5 –anatase intergrowth formation, which causes a loss in long-range order along the M 3 O 5 c axis. Strong diffuse streaking in the SAED patterns was also evident and supported the presence of disordered intergrowths from the oxidation of M 3 O 5 . PDF analysis showed a significant improvement in the fit to the data for the slow-cooled RI, primarily in the <17 Å region, when anatase was added to the PDF model. The results presented here highlight the importance of the reduction and cooling stages during the formation of these industrially relevant RI minerals, which may be used to direct the production process and final TiO 2 product quality.

D'Angelo, Anita M. (ORCID:0000000230685288)↗

CHARACTERIZATION OF DIRECT ADDITIVE MANUFACTURED U3Si2 SURROGATE TO PREDICT U3Si2 MICROSTRUCTURES

The purpose of this research is to perform characterization exclusively on U3Si2 surrogate materials to predict the process envelope for future work with uranium compounds, considering potential microstructural properties. The surrogate material will be synthesized using a laser energy source. This characterization work will provide new property data to aid the concept development stages of fabricating U3Si2 by means of a novel INL-designed direct additive manufacturing methodology. This process not only seeks to potentially reduce production costs, but also to shorten the current silicide fuel fabrication process. U3Si2 has been downselected as a candidate for accident-tolerant fuel for commercial light-water reactors due to its improved thermal conductivity, higher atomic density, and fuel cycle economics when compared with UO2. The research efforts on this work are performed at Idaho National Laboratory (INL) in partnership with Westinghouse Electric. The initial stage of the surrogate research will include a thermodynamic study along with physical and mechanical property analyses to assist in the downselection of surrogate materials for initial experimentation. Initial characterization analyzed the microstructural effects to determine effectiveness of laser interaction on the surrogate materials. Additional characterization via scanning electron microscopy (SEM), transmission electron microscopy (TEM), and x-ray diffraction (XRD) may predict the end product morphology when working with uranium compounds. Complementary comparative studies were performed on the surrogate end products analyzing similarities in microstructural features present on the U3Si2 fuel fabricated by means of alternate methods. This stage provided novel microstructural data on surrogate silicide fuel fabrication by means of an additive manufacturing process (laser synthesis), and was crucial to confirm the formation of surrogate silicide fuels (Hf3Si2 and Zr3Si2) employing a laser synthesis.

42 ENGINEERING↗

Hydrothermal synthesis of highly crystalline RuS{sub 2} nanoparticles as cathodic catalysts in the methanol fuel cell and hydrochloric acid electrolysis

Highlights: • Highly crystalline RuS{sub 2} nanoparticles have been first synthesized by a “one-step” hydrothermal method. • The product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} with average particle size of 14.8 nm. • RuS{sub 2} nanoparticles were used as cathodic catalysts in methanol fuel cell and hydrochloric acid electrolysis. • The catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}. - Abstract: Highly crystalline ruthenium sulfide (RuS{sub 2}) nanoparticles have been first synthesized by a “one-step” hydrothermal method at 400 °C, using ruthenium chloride and thiourea as reactants. The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy/energy disperse spectroscopy (SEM/EDS), thermo gravimetric-differential thermal analyze (TG-DTA), transmission electron microscopy equipped with selected area electron diffraction (TEM/SAED). Fourier transform infrared spectra (IR), and X-ray photoelectron spectroscopy (XPS). XRD result illustrates that the highly crystalline product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} and the average particle size is 14.8 nm. SEM and TEM images display the products have irregular shape of 6–25 nm. XPS analyst indicates that the sulfur exists in the form of S{sub 2}{sup 2−}. Cyclic voltammetry (CV), rotating disk electrode (RDE), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) measurements are conducted to evaluate the electrocatalytic activity and stability of the highly crystalline RuS{sub 2} nanoparticles in oxygen reduction reaction (ORR) for methanol fuel cell and hydrochloric acid electrolysis. The results illustrate that RuS{sub 2} is active towards oxygen reduction reaction. Although the activity of RuS{sub 2} is lower than that of Pt/C, the RuS{sub 2} catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electron Donor Utilization and Secondary Mineral Formation during the Bioreduction of Lepidocrocite by Shewanella putrefaciens CN32

The bioreduction of Fe(III) oxides by dissimilatory iron reducing bacteria (DIRB) may result in the production of a suite of Fe(II)-bearing secondary minerals, including magnetite, siderite, vivianite, green rusts, and chukanovite; the formation of specific phases controlled by the interaction of various physiological and geochemical factors. In an effort to better understand the effects of individual electron donors on the formation of specific Fe(II)-bearing secondary minerals, we examined the effects of a series of potential electron donors on the bioreduction of lepidocrocite ($γ$-FeOOH) by Shewanella putrefaciens CN32. Biomineralization products were identified by X-ray diffraction, Mössbauer spectroscopy, and scanning electron microscopy. Acetate, citrate, ethanol, glucose, glutamate, glycerol, malate, and succinate were not effectively utilized for the bioreduction of lepidocrocite by S. putrefaciens CN32; however, substantial Fe(II) production was observed when formate, lactate, H 2 , pyruvate, serine, or N acetylglucosamine (NAG) was provided as an electron donor. Carbonate or sulfate green rust was the dominant Fe(II)-bearing secondary mineral when formate, H 2 , lactate, or NAG was provided, however, siderite formed with pyruvate or serine. Geochemical modeling indicated that pH and carbonate concentration are the key factors determining the prevalence of carbonate green rust verses siderite.

58 GEOSCIENCES↗

Hydrothermal synthesis of uniform WO{sub 3} submicrospheres using thiourea as an assistant agent

Nearly monodisperse tungsten trioxide submicrospheres have been synthesized with tungsten acid and HCl as the starting materials and thiourea as a structure-directing agent through a facile hydrothermal method. The obtained products were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy and energy dispersive X-ray, respectively. The results show that the WO{sub 3} submicrospheres are monodisperse with a diameter of about 800-1000 nm. The morphology of the products gradually evolutes from rods to spheres with increase of the reaction time. The formation mechanism of the WO{sub 3} submicrospheres is primarily discussed.

36 MATERIALS SCIENCE↗

Detecting Nanophase Weathering Products with CheMin: Reference Intensity Ratios of Allophane, Aluminosilicate Gel, and Ferrihydrite

X-ray diffraction (XRD) data collected of the Rocknest samples by the CheMin instrument on Mars Science Laboratory suggest the presence of poorly crystalline or amorphous materials [1], such as nanophase weathering products or volcanic and impact glasses. The identification of the type(s) of X-ray amorphous material at Rocknest is important because it can elucidate past aqueous weathering processes. The presence of volcanic and impact glasses would indicate that little chemical weathering has occurred because glass is highly susceptible to aqueous alteration. The presence of nanophase weathering products, such as allophane, nanophase iron-oxides, and/or palagonite, would indicate incipient chemical weathering. Furthermore, the types of weathering products present could help constrain pH conditions and identify which primary phases altered to form the weathering products. Quantitative analysis of phases from CheMin data is achieved through Reference Intensity Ratios (RIRs) and Rietveld refinement. The RIR of a mineral (or mineraloid) that relates the scattering power of that mineral (typically the most intense diffraction line) to the scattering power of a separate mineral standard such as corundum [2]. RIRs can be calculated from XRD patterns measured in the laboratory by mixing a mineral with a standard in known abundances and comparing diffraction line intensities of the mineral to the standard. X-ray amorphous phases (e.g., nanophase weathering products) have broad scattering signatures rather than sharp diffraction lines. Thus, RIRs of X-ray amorphous materials are calculated by comparing the area under one of these broad scattering signals with the area under a diffraction line in the standard. Here, we measured XRD patterns of nanophase weathering products (allophane, aluminosilicate gel, and ferrihydrite) mixed with a mineral standard (beryl) in the CheMinIV laboratory instrument and calculated their RIRs to help constrain the abundances of these phases in the Rocknest samples.

Rampe, E. B.↗