Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DEMOLITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Distribution and Room Air Mixing Risks to Retrofitted Homes

Energy efficiency upgrades reduce heating and cooling loads on a house. With enough load reduction and if the HVAC system warrants replacement, the HVAC system is often upgraded with a more efficient, lower capacity system that meets the loads of the upgraded house. For a single-story house with ceiling supply air diffusers, ducts are often removed and upgraded. For houses with ducts that are embedded in walls, the cost of demolition precludes the replacement of ducts. The challenge with the use of existing ducts is that the reduced airflow creates a decreased throw at the supply registers, and the supply air and room air do not mix well, leading to potential thermal comfort complaints. This project investigates this retrofit scenario. The issues and solutions discussed here are relevant to all climate zones, with emphasis on climates that require cooling.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Supply Chain Sustainability Analysis of Indirect Liquefaction of Blended Biomass to Produce High Octane Gasoline

The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims at developing and deploying technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2015). BETO also performs a supply chain sustainability analysis (SCSA). This report describes the SCSA of the production of renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of lignocellulosic biomass. This SCSA was developed for the 2017 design case for feedstock logistics (INL, 2014) and for the 2022 target case for HOG production via IDL (Tan et al., 2015). The design includes advancements that are likely and targeted to be achieved by 2017 for the feedstock logistics and 2022 for the IDL conversion process. The 2017 design case for feedstock logistics demonstrated a delivered feedstock cost of $80 per dry U.S. short ton by the year 2017 (INL, 2014). The 2022 design case for the conversion process, as modeled in Tan et al. (2015), uses the feedstock 2017 design case blend of biomass feedstocks consisting of pulpwood, wood residue, switchgrass, and construction and demolition waste (C&D) with performance properties consistent with a sole woody feedstock type (e.g., pine or poplar). The HOG SCSA case considers the 2017 feedstock design case (the blend) as well as individual feedstock cases separately as alternative scenarios when the feedstock blend ratio varies as a result of a change in feedstock availability. These scenarios could be viewed as bounding SCSA results because of distinctive requirements for energy and chemical inputs for the production and logistics of different components of the blend feedstocks.

Cai, Hao↗

Supply Chain Sustainability Analysis of Indirect Liquefaction of Blended Biomass to Produce High Octane Gasoline

This report describes the SCSA of the production of renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of lignocellulosic biomass. This SCSA was developed for both the 2015 SOT (Hartley et al., 2015; ANL, 2016; DOE, 2016) and the 2017 design case for feedstock logistics (INL, 2014) and for both the 2015 SOT (Tan et al., 2015a) and the 2022 target case for HOG production via IDL (Tan et al., 2015b). The design includes advancements that are likely and targeted to be achieved by 2017 for the feedstock logistics and 2022 for the IDL conversion process. In the SCSA, the 2015 SOT case for the conversion process, as modeled in Tan et al. (2015b), uses the 2015 SOT feedstock blend of pulpwood, wood residue, and construction and demolition waste (C&D). Moreover, the 2022 design case for the conversion process, as described in Tan et al. (2015a), uses the 2017 design case blend of pulpwood, wood residue, switchgrass, and C&D. The performance characteristics of this blend are consistent with those of a single woody feedstock (e.g., pine or poplar). We also examined the influence of using a single feedstock type on SCSA results for the design case. These single feedstock scenarios could be viewed as bounding SCSA results given that the different components of the feedstock blend have varying energy and material demands for production and logistics.

09 BIOMASS FUELS↗

Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energy Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Freight Analysis Framework Verson 4 (FAF4) - Building the FAF4 Regional Database: Data Sources and Estimation Methodologies

The Freight Analysis Framework (FAF) integrates data from a variety of sources to create a comprehensive national picture of freight movements among states and major metropolitan areas by all modes of transportation. It provides a national picture of current freight flows to, from, and within the United States, assigns the flows to the transportation network, and projects freight flow patterns into the future. The FAF4 is the fourth database of its kind, FAF1 provided estimates for truck, rail, and water tonnage for calendar year 1998, FAF2 provided a more complete picture based on the 2002 Commodity Flow Survey (CFS) and FAF3 made further improvements building on the 2007 CFS. Since the first FAF effort, a number of changes in both data sources and products have taken place. The FAF4 flow matrix described in this report is used as the base-year data to forecast future freight activities, projecting shipment weights and values from year 2020 to 2045 in five-year intervals. It also provides the basis for annual estimates to the FAF4 flow matrix, aiming to provide users with the timeliest data. Furthermore, FAF4 truck freight is routed on the national highway network to produce the FAF4 network database and flow assignments for truck. This report details the data sources and methodologies applied to develop the base year 2012 FAF4 database. An overview of the FAF4 components is briefly discussed in Section 2. Effects on FAF4 from the changes in the 2012 CFS are highlighted in Section 3. Section 4 provides a general discussion on the process used in filling data gaps within the domestic CFS matrix, specifically on the estimation of CFS suppressed/unpublished cells. Over a dozen CFS OOS components of FAF4 are then addressed in Section 5 through Section 11 of this report. This includes discussions of farm-based agricultural shipments in Section 5, shipments from fishery and logging sectors in Section 6. Shipments of municipal solid wastes and debris from construction and demolition activities are covered in Section 7. Movements involving OOS industry sectors on Retail, Services, and Household/Business Moves are addressed in Section 8. Flows of OOS commodity on crude petroleum and natural gas are presented in Sections 9 and 10, respectively. Discussions regarding shipments of foreign trade, including trade with Canada/Mexico, international airfreight, and waterborne foreign trade, are then discussed in Section 11. Several appendices are also provided at the end of this report to offer additional information.

97 MATHEMATICS AND COMPUTING↗

Green Power Initiative

National energy policy supports the gathering of more detailed and authoritative data on the introduction of renewable bio-based fuels into new and existing district energy systems via the application of biomass gasification. The University of Iowa developed a biomass-fueled, university-scale steam generation system based on biomass gasification technologies. The system serves as a state-of-the-art research and educational facility in the emerging application of gasification in steam generation. The facility, which includes a smaller down-draft gasifier and a larger multi-stage biomass boiler, was designed to operate primarily on wood-based fuels, but has provisions for testing other biomass fuel sources produced within a 100-mile radius, providing enough flexibility to meet the fluctuating local supply of biomass from industry and Midwest agriculture. The equipment was installed in an existing, staffed facility. The down-draft gasifier unit is operated by College of Engineering staff and students, under the direct technical supervision of qualified Utilities plant staff. The Green Power Initiative also includes a substantial, innovative educational component. In addition to an onsite, graduate-level research program in biomass fuels, the investigators have integrated undergraduate and graduate level teaching – through classroom studies and experiential learning – and applied research into a biomass-based, university-scale, functioning power plant. University of Iowa is unique in that it currently has multiple renewable energy technologies deployed, including significant biomass combustion (oat hulls) at its Main Power Plant and a new reciprocating engine based renewable district energy system. This project complements and supports the national energy policy and State of Iowa initiatives in ethanol and biodiesel. Byproducts of ethanol and biodiesel processes (distiller grains) as well as industry residues (oat hulls, wood chips, construction and demolition waste), farm related material (seed corn and soybean seed), and poplar trees for cleaning up ground water are logical feed stocks for gasification.

09 BIOMASS FUELS↗

Integrated Facilities and Infrastructure Plan.

Our facilities and infrastructure are a key element of our capability-based science and engineering foundation. The focus of the Integrated Facilities and Infrastructure Plan is the development and implementation of a comprehensive plan to sustain the capabilities necessary to meet national research, design, and fabrication needs for Sandia National Laboratories’ (Sandia’s) comprehensive national security missions both now and into the future. A number of Sandia’s facilities have reached the end of their useful lives and many others are not suitable for today’s mission needs. Due to the continued aging and surge in utilization of Sandia’s facilities, deferred maintenance has continued to increase. As part of our planning focus, Sandia is committed to halting the growth of deferred maintenance across its sites through demolition, replacement, and dedicated funding to reduce the backlog of maintenance needs. Sandia will become more agile in adapting existing space and changing how space is utilized in response to the changing requirements. This Integrated Facilities & Infrastructure (F&I) Plan supports the Sandia Strategic Plan’s strategic objectives, specifically Strategic Objective 2: Strengthen our Laboratories’ foundation to maximize mission impact, and Strategic Objective 3: Advance an exceptional work environment that enables and inspires our people in service to our nation. The Integrated F&I Plan is developed through a planning process model to understand the F&I needs, analyze solution options, plan the actions and funding, and then execute projects.

99 GENERAL AND MISCELLANEOUS↗

Historic American Landscapes Survey: Arco Naval Proving Ground (Idaho National Laboratory)

Based on historical evaluations in 1993 and 1997, historians determined that the then-remaining Arco NPG structures were significant to the nation’s history through their association with World War II . Through ensuing discussions with the SHPO, it was further determined that the infrastructure and associated landscape were also significant. According to provisions of INL’s Cultural Resource Management Plan (CRMP) as legitimized through a 2004 Programmatic Agreement between DOE-ID, the Idaho State Historic Preservation Office (SHPO), and Advisory Council on Historic Preservation (ACHP) historians identified the World War II structures as DOE “Signature Properties”. As defined by DOE-HQ, Signature Properties “denote its [DOE’s] most historically important properties across the complex…and/or those properties that are viewed as having tourism potential.” The INL is a secure site and the INL land and structures are not accessible to the public and, therefore have no “tourism potential”. Although DOE-ID actively sought other uses for the vacant, unused buildings, none were identified and the buildings present safety and health concerns. A condition assessment found lead based paint, asbestos, rodent infestation/droppings, small animal carcasses, mold, and, in CF-633, areas of radiological contamination. In early 2013, DOE-ID notified the Idaho SHPO, ACHP, and, as required by the INL CRMP and PA, DOE-Headquarters Federal Preservation Officer, of their intent to demolish the vacant buildings (CF-606, CF-607, CF-613, CF-632, and CF-633). The proposed “end-state” of the buildings will be either grass and/or gravel pads. Through the NHPA Section 106 consultation process, measures to mitigate the adverse impacts of demolition were determined and agreed to through a Memorandum of Agreement (MOA) between DOE-ID, SHPO, and ACHP. The measures include the development and installation of interpretive signs to be placed at a publicly accessible location, retention of original components of CF-633, and completion of this HALS standard format report. Buildings, infrastructure, and features that are not scheduled for removal are documented here as well as properties that are scheduled for removal and the overall Arco NPG landscape. The Arco NPG, located in the remote high-desert of eastern Idaho aided in the defense and eventual ally victory in the Pacific Theater of World War II, in addition to revising national standards for the safe storage and transport of conventional ordnance.

99 GENERAL AND MISCELLANEOUS↗

TA-03-0035 Press Building – D&D

The Press Building was constructed in 1954 with 15,073 ft 2 of floor space. It was built to house a 5000 ton double action Lake Erie hydraulic press and a uranium casting area. Missions included uranium activities associated with the Nuclear Weapons and Rover Rocket programs. At the end of the Rover program, the building continued to support various uranium materials science projects until the building was placed into a cold and dark status in 2013 and then was demolished in 2017. The building interior, the press, and associated systems were radiological contaminated and disposed of as low level waste. The demolition of this building opened up valuable real estate in the TA-3 area for the future construction of an ~11,000 Sq. Ft. Biosafety Level 2 laboratory and office building. This building will support the ongoing Bioscience Division mission at the laboratory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bench Scale Study of Coating Formulations for Abatement of Mercury Vapor and Recovery of Mercury Spills

A sealant formulation has been developed that effectively mitigates human exposure to elemental mercury vapor evolving from spilled mercury. The sealant may be dispensed using a fogging methodology (for industrial settings) or a common spray bottle (for home or school settings). In parallel, the potential for Hg recovery using strippable coatings was evaluated. Four liquid coatings were evaluated: one fogging fixative (FX2) developed at INL for the containment of surface and airborne contamination and three commercially available strippable decontamination gels (Carboset 441, Encor 449, and Stripcoat TLC Free). Bench scale mercury vapor abatement tests were conducted in an enclosure using FX2 with the addition of a mercury absorbent and a mercury reactant. Testing with FX2 showed the reactant contributed significantly to reducing the rate of mercury evaporation. The reactant had a minimal impact on the mercury evaporation rate for the strippable coatings. The potential of strippable coatings to remove/recover mercury was inferred from the adhesive and cohesive performance of sprayable dilutions of the coatings applied to porous and non-porous surfaces. Testing provided the following results: • Mercury vapor concentration was reduced by a factor of 40 using the reactant enhanced FX2 solution, as well as with dilutions of Carboset and Encor. Dilute Stripcoat was less effective at reducing Hg evaporation. • A 100× reduction in Hg evaporation rate was achieved using a coating of FX + the Hg reactant (a.k.a. FX Hg), compared to uncoated Hg. • A 2× reduction in the Hg vapor accumulation rate was achieved using FX Hg, compared to the strippable coatings. • Strippability and adhesion tests show that dilutions of Carboset and Stripcoat can be stripped from a variety of indoor surfaces. Dilute Encor was not strippable. Results suggest FX Hg and dilute Carboset will likely reduce Hg vapor concentrations, in an indoor setting, to a level at or below the Occupational Safety and Health Administration 8-hour human exposure limit (0.1 mg/m3). FX Hg dispensed via fogging would increase worker safety during remediation and demolition of industrial facilities with high levels of elemental mercury contamination. When applied via spray bottle, FX Hg may provide a safe and convenient method for the mitigation of Hg vapor in residential or commercial settings (e.g., offices, homes, schools). This approach would be most beneficial where recovery of the spilled Hg is impractical. A sprayed then stripped application of dilute Carboset may provide a safe and convenient method for recovery of small Hg spills in residential and commercial settings. Further testing is required to determine if liquid Hg sufficiently adheres to the strippable coating to be recovered in this way. If it can be dispensed as a fog, dilute Carboset could be employed to recover Hg contamination in industrial settings. Testing of the foggability of dilute Carboset is required to assess this potential.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Natural Resource Assessment for the Proposed Environmental Management Disposal Facility (EMDF), Oak Ridge, Tennessee

A major contributor to the success of decommissioning, demolition, and remediation activities at the East Tennessee Technology Park by the U.S. Department of Energy (DOE) Oak Ridge Office of Environmental Management (OREM) has been the availability of an onsite Low-Level Waste (LLW) landfill. However, the existing LLW landfill is near capacity, with cleanup of excess facilities at the Y-12 National Security Complex (Y-12) and Oak Ridge National Laboratory (ORNL) pending. Timely provision of additional disposal capacity on the Oak Ridge Reservation (ORR) is required to remedy the threats to human health and the environment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Proposed Disposition of Large-Scale Artifacts Associated with Idaho National Laboratory's Nuclear Reactor Testing Historic Context

As an active scientific and engineering laboratory with a historic mission of testing and development of nuclear power, INL presents unique challenges to historic preservation. These challenges include radiologically contaminated buildings and equipment, security restrictions, and the nearly constant modification, demolition, and replacement of structures and equipment to meet changing programmatic and mission needs. Because of these challenges, what began in 1966 as a building-by-building approach to historic preservation of the INL built environment has evolved into a more holistic management strategy and systematic procedures for identifying, evaluating, and protecting important properties within a historic contextual framework. The development of contexts, identification of historic themes, and inventories of historic INL architectural properties have been expanded following the strategies and procedures outlined within the INL Cultural Resource Management Plan (CRMP). Inventories are ongoing to catalog other important INL architectural properties that may or may not be eligible to the National Register of Historic Places (NRHP), such as nuclear-era artifacts, and photographic and engineering collections.

99 GENERAL AND MISCELLANEOUS↗

Water Application for Dust Control in the Central Plateau: Impacts, Alternatives, and Work Strategies

Dust control is needed during many activities at the Hanford Site for health and safety purposes and to prevent contaminant dispersal via atmospheric transport. Spraying of water is the baseline approach at the Hanford Site for dust control in most applications, including use during excavation activities, on roadways and disturbed areas, for facility demolition, and during construction activities. Use of water at or near waste sites may introduce infiltration to the subsurface. As such, the recharge rate (hydraulic driving force) through the vadose zone and to the groundwater may be increased by an extent related to the duration and amount of water applied. An increased recharge rate can increase contaminant fluxes toward the groundwater and potentially induce lateral movement depending on the magnitude of the recharge rate. Thus, dust suppression via water spray is of potential concern for contaminants in the vadose zone. Because Hanford remediation work is transitioning from the River Corridor to efforts on the Central Plateau where there is a significant inventory of contaminants in the vadose zone, dust suppression approaches for these efforts will need to understand the potential negative effects of water addition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluation of Dell Frenzi Park, Mercury, Area 23, Nevada National Security Site, Nye County, Nevada (Cultural Resources Inventory Report)

The U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office (NNSA/NFO) proposes to remove the ball courts and grade the area known as Dell Frenzi Park in the town of Mercury at the Nevada National Security Site (NNSS) in Nye County, Nevada. The park is within the Mercury Historic District (Nevada State Historic Preservation Office (SHPO) Resource No. D230). This project is an undertaking subject to review under Title 54 U.S.C. § 306108, commonly known as Section 106 of the National Historic Preservation Act, Title 54 U.S.C. § 300101, et seq., and its implementing regulations, 36 C.F.R. Part 800. The NNSA/NFO has consulted with the SHPO and the Advisory Council on Historic Preservation regarding the demolition of and modification to resources in Mercury as part of a modernization project, and has developed the Mercury Programmatic Agreement (PA) with the SHPO that specifies the approach that NNSA/NFO will take to meet its statutory obligations toward historic preservation within the district. The district is located in Sections 10–12, 14, and 15, T15S R53E, Mount Diablo Benchmark (BM) (projected) in Area 23 of the NNSS. In 2010, the Nevada Test Site became the NNSS, and will be referred to as such throughout this report as appropriate. This report is part of the Report Series: Evaluation, Finding of Effect, and Mitigation Documentation for Dell Frenzi Park, Mercury, Area 23, Nevada National Security Site, Nye County, Nevada

54 ENVIRONMENTAL SCIENCES↗

A Revised Architectural Survey of the Nuclear Engine Maintenance Assembly and Disassembly Facility, Area 25, Nevada National Security Site, Nye County, Nevada

The U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office (NNSA/NFO) anticipates closure activities under the Federal Facility Agreement Consent Order (FFACO) and eventual demolition of the Engine Maintenance and Disassembly (E-MAD) facility, to meet Environmental Management mission requirements. The NNSA/NFO has obligations under Section 106 of the National Historic Preservation Act (NHPA) and its implementing regulations (36 C.F.R. Part 800) to consider the effects of its actions and undertakings on historically important properties and to develop and implement strategies to minimize or mitigate adverse effects to these resources. This Section 106 architectural survey and evaluation of the buildings and structures in the E-MAD facility was done under requirements of 36 C.F.R § 800.4 - Identification of historic properties. Desert Research Institute (DRI) completed an architectural survey of a 21-acre area of potential effect in February 2019. DRI previously surveyed the entire E-MAD facility as a single architectural resource eligible for inclusion in the National Register of Historic Places (NRHP or National Register) under Criteria A and C and Consideration G and as a contributor to the potential Nuclear Rocket Development Station (NRDS) Historic District (Beck et al. 1996).

54 ENVIRONMENTAL SCIENCES↗

Eligibility Assessment of TA-52-1 and TA-52-11: The Ultra-High Temperature Reactor Experiment (UHTREX) Complex

The U.S. Department of Energy (DOE), National Nuclear Security Administration, Los Alamos Field Office (NA-LA) requests the State Historic Preservation Officer (SHPO) to concur with the eligibility determinations contained in this report for Buildings 1 and 11 in Technical Area 52 (TA-52) at Los Alamos National Laboratory (LANL or the Laboratory). Triad National Security LLC cultural resources staff have completed the evaluation of two buildings, called the UHTREX Complex, for inclusion in the National Register of Historic Places (Register). This complex includes the UHTREX Reactor Building (TA-52-1), and an associated Mechanical Assembly Building (TA-52-11). As part of LANL’s Footprint Reduction Program, both facilities of the UHTREX Complex are scheduled for characterization and demolition. In addition to evaluating their eligibility in the Register, the properties at TA-52 were assessed for potential adaptive reuse, long-term preservation, and public interpretation. Based on the findings in this assessment report, both TA-52-1 and TA-52-11 have been determined to not be eligible for inclusion in the Register. The history of the UHTREX Complex lacks association with exceptionally significant Cold War events of scientific developments. Both TA-52-1 and TA-52-11 lack the necessary internal historic integrity suitable for long-term preservation or public interpretation. And both facilities contain legacy radioactive contamination, which prohibits their reuse. In addition to its loss of integrity and context, TA-52- 11 has been determined ineligible due to its status as a support building of secondary or minor importance. In compliance with Section 106 and Section 110 of the National Historic Preservation Act of 1966, as amended, and with the Programmatic Agreement among the U.S. Department of Energy, National Nuclear Security Administration, Los Alamos Field Office, the New Mexico State Historic Preservation Office, and the Advisory Council on Historic Preservation Concerning Management of the Historic Properties at Los Alamos National Laboratory, Los Alamos, New Mexico, the SHPO is requested to concur with the eligibility determinations contained in this report for the UHTREX Complex in TA-52.

99 GENERAL AND MISCELLANEOUS↗

Imagery Applications for Advanced Event Analytics (WBS 24.3.1.3.3-IDC FY202 Final Project Report)

Accurate event locations and replicability of location analyses are essential for assessing the nature of an event, its context, ambient site conditions, and proximity to relevant facilities and infrastructure. Additionally, accurate event locations provide valuable information that reduce uncertainties, improve confidence in event analyses, and inform in-field verification activities. However, event location/relocation and replicability are difficult due to a number of factors, including spatially-sparse network coverage in some areas of the globe and variability in seismic data processing. This team proposed that the incorporation of high-fidelity imagery as a data backbone to the analytical assessment of a suspected underground explosion and/or an advanced seismic event bulletin produced by the International Data Centre (IDC) of the Preparatory Commission for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO PrepCom) could reduce uncertainties and improve confidence in analyses. Specifically, temporally-separated images can reduce uncertainty by identifying areas where change has occurred (e.g., building construction or demolition, road or facilities improvements). The primary goal of this project was to develop an automated geospatial processing script for imagery change detection to better reflect needs of the technical community (including the IDC) and to make the use of such a tool accessible in a variety of settings across platforms. Technical experts at Los Alamos National Laboratory successfully built GAIA: the Geospatial Automated Imagery Analysis tool, to fill this need. GAIA combines five tool components to produce orthorectified time separated imagery and imagery change detection maps. Our toolkit (1) reduces error by providing a standardized workflow for image analyses and (2) significantly reduces processing time from between 7 and 24+ hours to approximately 5 minutes. Technical experts at Sandia National Laboratories supported GAIA via beta-testing and by introducing a web-based system approach for increased applicability. To test the function, performance, broad application, and ease-of-use of GAIA, we applied it to four separate test cases. The results of this preliminary investigation show promise in reducing uncertainty in seismic event locations: if satellite imagery can show regions where operations that produce seismic activity likely occurred, then pursuing imagery to locate epicenters of seismic nuclear events could reduce the time needed to find the true epicenter location.

58 GEOSCIENCES↗

Imagery Applications for Advanced Event Analytics (WBS 24.3.1.3.3-IDC FY2020 Final Project Report)

Accurate event locations and replicability of location analyses are essential for assessing the nature of an event, its context, ambient site conditions, and proximity to relevant facilities and infrastructure. Additionally, accurate event locations provide valuable information that reduce uncertainties, improve confidence in event analyses, and inform in-field verification activities. However, event location/relocation and replicability are difficult due to a number of factors, including spatially-sparse network coverage in some areas of the globe and variability in seismic data processing. This team proposed that the incorporation of high-fidelity imagery as a data backbone to the analytical assessment of a suspected underground explosion and/or an advanced seismic event bulletin produced by the International Data Centre (IDC) of the Preparatory Commission for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO PrepCom) could reduce uncertainties and improve confidence in analyses. Specifically, temporally-separated images can reduce uncertainty by identifying areas where change has occurred (e.g., building construction or demolition, road or facilities improvements). The primary goal of this project was to develop an automated geospatial processing script for imagery change detection to better reflect needs of the technical community (including the IDC) and to make the use of such a tool accessible in a variety of settings across platforms. Technical experts at Los Alamos National Laboratory successfully built GAIA: the Geospatial Automated Imagery Analysis tool, to fill this need. GAIA combines five tool components to produce orthorectified time-separated imagery and imagery change detection maps. Our toolkit (1) reduces error by providing a standardized workflow for image analyses and (2) significantly reduces processing time from between 7 and 24+ hours to approximately 5 minutes. Technical experts at Sandia National Laboratories supported GAIA via beta-testing and by introducing a web-based system approach for increased applicability. To test the function, performance, broad application, and ease-of-use of GAIA, we applied it to four separate test cases. The results of this preliminary investigation show promise in reducing uncertainty in seismic event locations: if satellite imagery can show regions where operations that produce seismic activity likely occurred, then pursuing imagery to locate epicenters of seismic nuclear events could reduce the time needed to find the true epicenter location.

58 GEOSCIENCES↗