Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Comparing π‐complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high‐performance liquid chromatography

Selective π‐complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π‐complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion‐mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1‐decyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π‐complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three‐phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Comparative Study of Two BAM Designs for Friction Sensitivity Testing of Explosives

A new commercial design of BAM friction tester that utilizes a programmable servo motor was tested in comparison to the traditional cam-driven model. Displacement and velocity profiles were analyzed for both designs; significant differences were found between the two designs, most notable of which is that the traditional cam-driven unit has plate velocities that can be 50–75 % greater than those seen on the servo-driven model. Five energetic materials were also tested on each machine, including PETN, RDX, HMX, CL-20, and HNAB. Finally, results from the servo-driven model generally showed slightly less sensitivity when compared to the cam driven model, though the magnitude of the difference is not significant enough to require modification of safe handling procedures for the materials tested.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Comparative Analyses of Bioequivalence Assessment Methods for In Vitro Permeation Test Data

ABSTRACT For topical, dermatological drug products, an in vitro option to determine bioequivalence (BE) between test and reference products is recommended. In particular, in vitro permeation test (IVPT) data analysis uses a reference‐scaled approach for two primary endpoints, cumulative penetration amount (AMT) and maximum flux ( J max ), which takes the within donor variability into consideration. In 2022, the Food and Drug Administration (FDA) published a draft IVPT guidance that includes statistical analysis methods for both balanced and unbalanced cases of IVPT study data. This work presents a comprehensive evaluation of various methodologies used to estimate critical parameters essential in assessing BE. Specifically, we investigate the performance of the FDA draft IVPT guidance approach alongside alternative empirical and model‐based methods utilizing mixed‐effects models. Our analyses include both simulated scenarios and real‐world studies. In simulated scenarios, empirical formulas consistently demonstrate robustness in approximating the true model, particularly in effectively addressing treatment–donor interactions. Conversely, the effectiveness of model‐based approaches heavily relies on precise model selection, which significantly influences their results. The research emphasizes the importance of accurate model selection in model‐based BE assessment methodologies. It sheds light on the advantages of empirical formulas, highlighting their reliability compared to model‐based approaches and offers valuable implications for BE assessments. Our findings underscore the significance of robust methodologies and provide essential insights to advance their understanding and application in the assessment of BE, employed in IVPT data analysis.

Leon, Sami↗
DOE OSTI2024

Scenario Planning Management Actions to Restore Cold Water Stream Habitat: Comparing Mechanistic and Statistical Modeling Approaches

ABSTRACT Under the United States Clean Water Act, states are required to periodically assess state waters to determine compliance with water quality criteria (including temperature) and then to develop total maximum daily loads (TMDLs) for impaired waters as necessary to bring them into compliance. We compared the performance of mechanistic stream temperature models (HeatSource, QUAL2K, and QUAL2Kw) applied to the mainstem of three TMDL watersheds (Middle Fork John Day, OR; Wind River, WA; South Fork Nooksack, WA) with that of spatial stream network (SSN) models applied to the full watersheds and used these to evaluate the potential effectiveness of restoration strategies. SSN models performed well with slightly lesser accuracy (RMSE = 0.47–0.87) for mainstem predictions than mechanistic models (RMSE = 0.4) but provided additional benefits to inform management, including information on spatial and temporal heterogeneity of restoration effectiveness throughout the watershed. Of the four scenarios considered (restoration of riparian zones to potential natural vegetation, channel narrowing, increasing flow by restricting irrigation withdrawals, and combined applications), riparian zone restoration was consistently the most effective in reducing temperatures at the outlet, mainstem, and throughout the watersheds. Predicted restoration effectiveness for thermal regimes varied significantly both within and among watersheds. A focus on water quality criteria exceedance only at the watershed outlet or along the mainstem reach can obscure knowledge of restoration potential for fish habitat in tributaries and headwaters, potential for creation of thermal refuge areas along the mainstem critical for maintaining migration corridors, and thermal regime heterogeneity across space and time.

Fuller, M. R.↗
DOE OSTI2024

A practical approach to using the Genomic Standards Consortium MIxS reporting standard for comparative genomics and metagenomics

Comparative analysis of (meta)genomes necessitates aggregation, integration, and synthesis of well-annotated data using standards. The Genomic Standards Consortium (GSC) collaborates with the research community to develop and maintain the Minimal Information about any (x) Sequence (MIxS) reporting standard for genomic data. To facilitate use of the GSC’s MIxS reporting standard, we provide a description of the structure and terminology, how to navigate ontologies for required terms in MIxS, and demonstrate practical usage through a soil metagenome example.

standards, metadata, genome, metagenome, schema, v↗
DOE OSTI2021

Comparative studies of 2HDMs under the Higgs boson precision measurements

We perform comparative studies for four types of the two Higgs Doublet Models (2HDMs) under the precision measurements of the Standard Model (SM) Higgs observables at the proposed Higgs factories. We explore the discovery potential based on the hypothetical deviations in the precision data for the 2HDMs up to one-loop level. We find 5σ observability from the χ2 fitting in a significant theory parameter space at future Higgs factories. For the Type-I 2HDM, regions with cos(β - α) ≲ -0.1 or cos(β - α) ≳ 0.08 are discoverable at more than 5σ level. For the other three types of 2HDMs, the 5σ region is even bigger: | cos(β - α)| ≳ 0.02 for tan β ~ 1. At small and large values of tan β, the region in cos(β - α) is further tightened. We examine the extent to which the different 2HDM theories may be distinguishable from one to the other at the 95% Confidence Level with four benchmark points as case studies. We show that a large part of the parameter space of the other types of 2HDMs can be distinguished from the benchmark points of the target model. The impacts of loop corrections are found to be significant in certain parameter regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

A comparative study of Higgs boson production from vector-boson fusion

The data taken in Run II at the Large Hadron Collider have started to probe Higgs boson production at high transverse momentum. Future data will provide a large sample of events with boosted Higgs boson topologies, allowing for a detailed understanding of electroweak Higgs boson plus two-jet production, and in particular the vector-boson fusion mode (VBF). We perform a detailed comparison of precision calculations for Higgs boson production in this channel, with particular emphasis on large Higgs boson transverse momenta, and on the jet radius dependence of the cross section. We study fixed-order predictions at next-to-leading order and next-to-next-to-leading order QCD, and compare the results to NLO plus parton shower (NLOPS) matched calculations. The impact of the NNLO corrections on the central predictions is mild, with inclusive scale uncertainties of the order of a few percent, which can increase with the imposition of kinematic cuts. We find good agreement between the fixed-order and matched calculations in non-Sudakov regions, and the various NLOPS predictions also agree well in the Sudakov regime. We analyze backgrounds to VBF Higgs boson production stemming from associated production, and from gluon-gluon fusion. At high Higgs boson transverse momenta, the Δy$_{jj}$ and/or m$_{jj}$ cuts typically used to enhance the VBF signal over background lead to a reduced efficiency. We examine this effect as a function of the jet radius and using different definitions of the tagging jets. QCD radiative corrections increase for all Higgs production modes with increasing Higgs boson p$_{T}$, but the proportionately larger increase in the gluon fusion channel results in a decrease of the gluon-gluon fusion background to electroweak Higgs plus two jet production upon requiring exclusive two-jet topologies. We study this effect in detail and contrast in particular a central jet veto with a global jet multiplicity requirement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Developing a Consistent Travel-Time Framework for Comparing Three-Dimensional Velocity Models for Seismic Location Accuracy

Abstract Location algorithms have historically relied on simple, one-dimensional (1D) velocity models for fast seismic event locations. 1D models are generally used as travel-time lookup tables, one for each seismic phase, with travel-times pre-calculated for event distance and depth. These travel-time lookup tables are extremely fast to use and this fast computational speed makes them the preferred type of velocity model for operational needs. Higher-dimensional (i.e., three-dimensional—3D) seismic velocity models are becoming readily available and provide more accurate event locations over 1D models. The computational requirements of these 3D models tend to make their operational use prohibitive. Additionally, comparing location accuracy for 3D seismic velocity models tends to be problematic, as each model is determined using different ray-tracing algorithms. Attempting to use a different algorithm than the one used to develop a model usually results in poor travel-time prediction. We demonstrate and test a framework to create first-P and first-S 3D travel-time correction surfaces using an open-source framework ( PCalc + GeoTess , https://www.sandia.gov/salsa3d/software/geotess ) that easily stores 3D travel-time and uncertainty data. This framework produces fast travel-time and uncertainty predictions and overcomes the ray-tracing algorithm hurdle because the lookup tables can be generated using the exact ray-tracing algorithm that is preferred for a model.

3D velocity models↗
DOE OSTI2022

Comparing the effect of virtual and in-person instruction on students’ performance in a design for additive manufacturing learning activity

The goal of this work is to compare the outcome of a design for additive manufacturing (DfAM) heuristics lesson conducted in a virtual learning environment to the same in an in-person learning environment. Prior work revealed that receiving DfAM heuristics at different points in the design process impacts the quality and novelty of designs produced afterward, but this work may have been limited by the solely virtual format. In this work, an identical experiment was performed in a face-to-face learning environment. Results indicate that neither learning format presents an advantage over the other when it comes to the quality of designs produced during the intervention. Participants across all experimental groups reported an increase in self-efficacy after the intervention, with improved performance on quiz-type questions. Furthermore, the novelty and variety of the designs produced by the in-person experimental groups were significantly lower than that of the virtual experimental groups. In addition to validating the effectiveness of virtual instruction as a teaching method, these results also support the authors’ hypothesis that the priming effect is stronger in an in-person classroom than in a virtual classroom.

Design for additive manufacturing↗
DOE OSTI2024

Comparing Transcriptomic Points of Departure to Apical Effect Concentrations For Larval Fathead Minnow Exposed to Chemicals with Four Different Modes Of Action

It is postulated that below a transcriptomic-based point of departure, adverse effects are unlikely to occur, thereby providing a chemical concentration to use in screening level hazard assessment. The present study extends previous work describing a high-throughput fathead minnow assay that can provide full transcriptomic data after exposure to a test chemical. One-day post-hatch fathead minnows were exposed to ten concentrations of three representatives of four chemical modes of action: organophosphates, ecdysone receptor agonists, plant photosystem II inhibitors, and estrogen receptor agonists for 24 h. Concentration response modeling was performed on whole body gene expression data from each exposure, using measured chemical concentrations when available. Transcriptomic points of departure in larval fathead minnow were lower than apical effect concentrations across fish species but not always lower than toxic effect concentrations in other aquatic taxa like crustaceans and insects. The point of departure was highly dependent on measured chemical concentration which were often lower than the nominal concentration. Differentially expressed genes between chemicals within modes of action were compared and often showed statistically significant overlap. In addition, reproducibility between identical exposures using a positive control chemical (CuSO 4 ) and variability associated with the transcriptomic point of departure using in silico sampling were considered. Results extend a transcriptomic-compatible fathead minnow high-throughput assay for possible use in ecological hazard screening.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

A comparative study of thermal- and electrocatalytic conversion of furfural: methylfuran as a primary and major product

Controlling reaction selectivity represents a fundamental challenge in heterogeneous catalysis. Here, we compare the selectivity in aqueous-phase thermal catalytic and electrocatalytic conversion of furfural and report the fundamental difference in elementary steps in the two reaction systems. Specifically, we observed that furfural alcohol and 2-methylfuran, which is the hydrogenation and hydrogenolysis product of furfural, respectively, are both primary products in electrocatalysis over a Cu electrode, with 2-methylfuran dominating the product distribution under electrode potentials between -0.55 and -0.75 V versus RHE. By contrast, in an aqueous-phase thermal reaction using a SiO 2 -supported Cu catalyst, furfural alcohol and its derivatives from the ring-rearrangement reaction are the major products, without production of 2-methylfuran, at the reaction temperature between 140 and 200 °C. Here, we propose that the distinct selectivity trends for oxygenate conversion via thermal and electrocatalytic reduction result from the distinct sequence of proton attack to the aldehyde group and may be generally true for reduction reactions of other biomass-derived oxygenates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A universal method to compare parts from STEP files

Abstract Model Based Definition (MBD) captures the complete specification of a part in digital form and leverages (at least) the universal “Standard for the Exchange of Product” (STEP) file format. MBD has revolutionized manufacturing due to time and cost savings associated with containing all engineering data within a single digital source. This work presents a novel method to transform digital definitions in any given STEP file into a tensor-like structure that is unique for each part and can be used to regenerate the original STEP file completely. Resulting STEP tensors are amenable to part comparison based on various part specifications in a general and straightforward manner. Here, part similarity is evaluated among sets of parts according to specific geometry, material composition, and design intent. Importantly, specification similarity can be quantified using only the tensors’ structure. As such, this approach is not limited to families of geometric shapes, part types, or fabrication methods; nor does it require any prior knowledge about the parts being compared.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electron beam irradiation effects on bulk metals: a comparative study of polycrystalline versus single-crystalline structures

This study investigates the effects of electron beam (e-beam) irradiation on the mechanical and structural properties of eight bulk metallic samples, comprising both polycrystalline (PC) and single-crystalline (SC) forms of Ni, Cr, V, and Ti. These metals were evaluated as potential candidates for beam exit windows in high-power (MW-class) particle accelerators. The primary objective is to identify metals capable of withstanding the conditions of high-power/MW-class e-beam accelerators and serve effectively as exit windows. Selection criteria were based on each metal’s intrinsic properties, power dissipation capability, and irradiation-induced changes in mechanical behavior, including hardness, elastic modulus, and defect density. Comprehensive characterization was conducted using field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and nanoindentation, performed both before and after exposure to a ~¿66 kGy dose from a 10 MeV e-beam accelerator. Results revealed that e-beam irradiation induced hardening in PC Ni, whereas PC Ti, commonly used in beam exit windows, exhibited softening. The observed softening in PC Ti is attributed to grain coarsening, elongation, and the formation of twins and twin boundaries, in contrast to the smaller, compressed grains in the pristine (Pr) PC Ti samples, consistent with the Hall–Petch relationship. The stresses due to twinning are small and insignificant in influencing the overall hardening of the PC Ti irradiated sample when compared to the stresses due to the dislocation density. Conversely, SC Ti samples exhibited irradiation-induced hardening. The SC Ti irradiated samples developed additional irradiation-induced modifications in crystallographic texture of (100), (101), (110), (200), (112), (004), and (211) as evidenced from the XRD results, which could probably explain the hardening effect that is caused by irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling household online shopping demand in the U.S.: a machine learning approach and comparative investigation between 2009 and 2017

Despite the rapid growth of online shopping and research interest in the relationship between online and in-store shopping, national-level modeling and investigation of the demand for online shopping with a prediction focus remain limited in the literature. Here, this paper differs from prior work and leverages two recent releases of the U.S. National Household Travel Survey (NHTS) data for 2009 and 2017 to develop machine learning (ML) models, specifically gradient boosting machine (GBM), for predicting household-level online shopping purchases. The NHTS data allow for not only conducting nationwide investigation but also at the level of households, which is more appropriate than at the individual level given the connected consumption and shopping needs of members in a household. We follow a systematic procedure for model development including employing Recursive Feature Elimination algorithm to select input variables (features) in order to reduce the risk of model overfitting and increase model explainability. Among several ML models, GBM is found to yield the best prediction accuracy. Extensive post-modeling investigation is conducted in a comparative manner between 2009 and 2017, including quantifying the importance of each input variable in predicting online shopping demand, and characterizing value-dependent relationships between demand and the input variables. In doing so, two latest advances in machine learning techniques, namely Shapley value-based feature importance and Accumulated Local Effects plots, are adopted to overcome inherent drawbacks of the popular techniques in current ML modeling. The modeling and investigation are performed at the national level, with a number of findings obtained. The models developed and insights gained can be used for online shopping-related freight demand generation and may also be considered for evaluating the potential impact of relevant policies on online shopping demand.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

A comparative look at structural variation among RC–LH1 ‘Core’ complexes present in anoxygenic phototrophic bacteria

All purple photosynthetic bacteria contain RC–LH1 ‘Core’ complexes. The structure of this complex from Rhodobacter sphaeroides, Rhodopseudomonas palustris and Thermochromatium tepidum has been solved using X-ray crystallography. Recently, the application of single particle cryo-EM has revolutionised structural biology and the structure of the RC–LH1 ‘Core’ complex from Blastochloris viridis has been solved using this technique, as well as the complex from the non-purple Chloroflexi species, Roseiflexus castenholzii. It is apparent that these structures are variations on a theme, although with a greater degree of structural diversity within them than previously thought. Furthermore, it has recently been discovered that the only phototrophic representative from the phylum Gemmatimonadetes, Gemmatimonas phototrophica, also contains a RC–LH1 ‘Core’ complex. At present only a low-resolution EM-projection map exists but this shows that the Gemmatimonas phototrophica complex contains a double LH1 ring. This short review compares these different structures and looks at the functional significance of these variations from two main standpoints: energy transfer and quinone exchange.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Comparative Analysis of Austenitized Steel Microstructures Due to Induction and Conventional Heating in High Magnetic Field

While magnetic field-assisted processing shows promise in improving alloys’ mechanical properties, insufficient descriptions of heating methods hinder development of tailored processing pathways. This study investigates how induction and conventional heating affect microstructures of near-eutectoid Fe–C steel with and without 9 T magnetic field. Conventionally heated samples in field showed more austenite grain growth compared to inductively heated counterparts. Annealing twin frequency increased under field, with twin density increases not fully explained by larger grain sizes.

Hurley, Megan [University of Florida, Gainesville]↗
DOE OSTI2026

Comparative Study of Zinc Cold-Spray Coating and Pre-treatments for Magnesium Alloys

Magnesium (Mg) alloys are appealing for automotive lightweighting owing to their high specific strength. However, their susceptibility to corrosion in harsh environments remains a major challenge. Conventional industrial pre-treatment coatings, including zinc phosphate, chromate conversion, and non-chromate conversion, often exhibit discontinuities and microcracks, leading to localized corrosion near fasteners and parting lines. Here, this study investigates cold-sprayed zinc (Zn) coatings as a novel pre-treatment alternative for high-pressure die cast (HPDC) AZ91 Mg alloys, demonstrating significant improvements in wear and corrosion performance. Cold spray produces uniform and robust coatings, reducing wear rate by over 50% and reducing corrosion rate by over 99.3%, as measured by evolved hydrogen release, compared to traditional pre-treatments. Multimodal corrosion testing reveals that Zn cold-spray coatings form a protective layer during exposure, minimizing general and filiform corrosion, and exhibiting corrosion potential (E corr ) that is nobler by ~ 400 mV than the surfaces of both pre-treated and uncoated AZ91. Scalability of cold spray for selective application around multimaterial joints further strengthens their industrial viability. This work establishes Zn cold-spray coatings as highly effective pre-treatment solutions for the advancement of corrosion resistant Mg alloy components in automotive applications.

multimodal corrosion↗
DOE OSTI2021

Cross-national analysis of food security drivers: comparing results based on the Food Insecurity Experience Scale and Global Food Security Index

Abstract The second UN Sustainable Development Goal establishes food security as a priority for governments, multilateral organizations, and NGOs. These institutions track national-level food security performance with an array of metrics and weigh intervention options considering the leverage of many possible drivers. We studied the relationships between several candidate drivers and two response variables based on prominent measures of national food security: the 2019 Global Food Security Index (GFSI) and the Food Insecurity Experience Scale’s (FIES) estimate of the percentage of a nation’s population experiencing food security or mild food insecurity (FI ). We compared the contributions of explanatory variables in regressions predicting both response variables, and we further tested the stability of our results to changes in explanatory variable selection and in the countries included in regression model training and testing. At the cross-national level, the quantity and quality of a nation’s agricultural land were not predictive of either food security metric. We found mixed evidence that per-capita cereal production, per-hectare cereal yield, an aggregate governance metric, logistics performance, and extent of paid employment work were predictive of national food security. Household spending as measured by per-capita final consumption expenditure (HFCE) was consistently the strongest driver among those studied, alone explaining a median of 92% and 70% of variation (based on out-of-sample R 2 ) in GFSI and FI , respectively. The relative strength of HFCE as a predictor was observed for both response variables and was independent of the countries used for model training, the transformations applied to the explanatory variables prior to model training, and the variable selection technique used to specify multivariate regressions. The results of this cross-national analysis reinforce previous research supportive of a causal mechanism where, in the absence of exceptional local factors, an increase in income drives increase in food security. However, the strength of this effect varies depending on the countries included in regression model fitting. We demonstrate that using multiple response metrics, repeated random sampling of input data, and iterative variable selection facilitates a convergence of evidence approach to analyzing food security drivers.

42 ENGINEERING↗