Transient porous nickel interlayers for improved silver-based Solid Oxide Fuel Cell brazes
Not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
Positron annihilation induced Auger electron spectroscopy (PAES) measurements from the surface of an oxidized Cu(100) single crystal show a large increase in the intensity of the annihilation induced Cu M2,3VV Auger peak as the sample is subjected to a series of isochronal anneals in vacuum up to annealing temperature 300 deg. C. The PAES intensity then decreases monotonically as the annealing temperature is increased to {approx}550 deg. C. Experimental positron annihilation probabilities with Cu 3p and O 1s core electrons are estimated from the measured intensities of the positron annihilation induced Cu M{sub 2,3}VV and O KLL Auger transitions. PAES results are analyzed by performing calculations of positron surface states and annihilation probabilities of the surface-trapped positrons with relevant core electrons taking into account the charge redistribution at the surface and various surface structures associated with low and high oxygen coverages. The variations in atomic structure and chemical composition of the topmost layers of the oxidized Cu(100) surface are found to affect localization and spatial extent of the positron surface state wave function. The computed positron binding energy and annihilation characteristics reveal their sensitivity to charge transfer effects, atomic structure and chemical composition of the topmost layers of the oxidized Cu(100) surface. Theoretical positron annihilation probabilities with Cu 3p and O 1s core electrons computed for the oxidized Cu(100) surface are compared with experimental ones. The obtained results provide a demonstration of thermal reduction of the copper oxide surface after annealing at 300 deg. C followed by re-oxidation of the Cu(100) surface at higher annealing temperatures presumably due to diffusion of subsurface oxygen to the surface.
Single-crystal copper thin films were oxidized at an isothermal temperature of 425 C and at an oxygen partial pressure of 0.005 torr. Specimens were prepared by epitaxial vapor deposition onto polished faces of rocksalt and were mounted in a hot stage inside the ultrahigh-vacuum chamber of a high-resolution electron microscope. An induction period of roughly 30 min was established which was independent of the film thickness but depended strongly on the oxygen partial pressure and to exposure to oxygen prior to oxidation. Neither stacking faults nor dislocations were found to be associated with the Cu2O nucleation sites. The experimental data, including results from oxygen dissolution experiments and from repetitive oxidation-reduction-oxidation sequences, fit well into the framework of an oxidation process involving the formation of a surface charge layer, oxygen saturation of the metal with formation of a supersaturated zone near the surface, and nucleation followed by surface diffusion of oxygen and bulk diffusion of copper for lateral and vertical oxide growth, respectively.
Graphical abstract: Schematic experimental setup used for the potentiodynamic mode of electrodeposition for the synthesis of CuO cauliflower onto stainless steel substrate. Highlights: ► Synthesis of CuO using potentiodynamic mode of electrodeposition. ► Uniformly spread cauliflower-like nanostructure. ► CuO cauliflowers provide high specific capacitance with good stability. ► CuO cauliflowers show high power and energy density values. -- Abstract: In present investigation, synthesis and characterization of novel cauliflower-like copper oxide (CuO) and its electrochemical properties have been performed. The utilized CuO cauliflowers were prepared by potentiodyanamic mode from an aqueous alkaline bath. X-ray diffraction pattern confirm the formation of monoclinic CuO cauliflowers. Scanning electron micrograph analysis reveals that CuO cauliflowers are uniformly spread all over the substrate surface with the surface area of 49 m{sup 2} g{sup −1} with bimodal pore size distribution. Electrochemical analysis shows that CuO cauliflower exhibits high specific capacitance of 179 Fg{sup −1} in 1 M Na{sub 2}SO{sub 4} electrolyte with 81% capacity retention after 2000 cycles. The Ragone plot discovers better power and energy densities of cauliflowers-like CuO sample. Present investigation illustrates that the potentiodynamic approach for the direct growth of cauliflower-like CuO is simple and cost-effective and can be applied for synthesis of other metal oxides, polymers etc.
Chemical looping with oxygen uncoupling (CLOU) is a variant of chemical looping combustion which uses as fluidized bed particles specific solid oxygen carriers which readily liberate gaseous oxygen (O2) in the fuel reactor. This enables much more efficient combustion of solid fuels such as coal than conventional chemical looping combustion, which relies on in situ gasification of char in to produce syngas that can react heterogeneously with the solid oxygen carrier. The CLOU process for coal is an especially interesting application of fluidized bed technology since several types of reactions take place within the reactors. For copper-based oxygen carrier particles, the copper cycles between cuprous and cupric oxide (Cu2O + ½ O2 ↔ 2 CuO). Volatiles released from coal during pyrolysis may react with oxidized copper or with released oxygen gas. Char reacts primarily with released oxygen. Balancing oxygen supply to the fuel reactor, heat generation and temperatures and global and internal circulation rates is a challenge. The University of Utah has been researching CLOU technology for 10 years, studying fundamental reaction kinetics for copper-based CLOU oxygen carriers, performing lab- and bench-scale experiments in single and dual fluidized beds, and developing reactor models through computational fluid dynamic modeling using Barracuda VR™. Recently the university began testing a 200 kWth dual circulating fluidized bed process development unit (PDU) for processing coal. The design process for that reactor, reactor simulations, operational experience and practical challenges of the PDU system are presented.
We report a simple and efficient technique to form high quality single phase cuprous oxide films on glass substrate using thermal evaporation of thin copper films followed by controlled thermal oxidation in air ambient. Crystallographic analysis and oxide phase determination, as well as grain size distribution have been studied using X-ray diffraction (XRD) method, while scanning electron microscopy (SEM) has been utilized to investigate the surface morphology of the as grown oxide films. The formation of various copper oxide phases is found to be highly sensitive to the oxidation temperature and a crystalline, single phase cuprous oxide film can be achieved for oxidation temperatures between 250°C to 320°C. Cu{sub 2}O film surface appeared in a faceted morphology in SEM imaging and a direct band gap of about 2.1 eV has been observed in UV-visible spectroscopy. X-ray photoelectron spectroscopy (XPS) confirmed a single oxide phase formation. Finally, a growth mechanism of the oxide film has also been discussed.
We use inelastic neutron scattering to show that superconducting (SC) rubidium iron selenide Rb0.82Fe1.68Se2 exhibits antiferromagnetic (AF) spin excitations near the in-plane wave vector Q = ( ,0) identical to that for iron arsenide superconductors. Moreover, we find that these excitations change from incommensurate to commensurate with increasing energy and occur at the expense of spin waves associated with the coexisting 5 5 block AF phase. Since these spin excitations cannot come from Fermi surface nesting based on angle resolved photoemission experiments, our results indicate the presence of local moments in SC Rb0.82Fe1.68Se2 that may have a similar origin as the hourglass-like spin excitations in copper oxide superconductors.
Herein the synthesis of Cu{sub 3}Ge films by exposing Cu-Ge alloy films to microwave radiation is reported. It is shown that microwave radiation led to the formation of copper germanide at temperatures ca. 80 °C. The electrical properties of the Cu{sub 3}Ge films are presented and compared for various annealing times. X-ray diffraction shows that the Cu{sub 3}Ge films formed after microwave annealing is crystalline in the orthorhombic phase. Rutherford backscattering and X-ray photoelectron spectroscopy confirms the formation of copper oxide encapsulation layer. Despite the slight oxidation of Cu during the microwave anneal the lowest resistivity of Cu{sub 3}Ge films obtained is 14 μΩ-cm.
Observations of spontaneous breaking of the rotational symmetry in an electron fluid, the so-called “electronic nematicity,” have been reported in several quantum materials. We have developed several different methods, based on angle-resolved transport measurements, to determine the amplitude and the director of the nematic order. Here, we present methods that are applicable to thin films or single crystals, illustrate them with transport data obtained on copper oxide superconductors, and discuss their relative advantages and disadvantages.
Copper oxide nanoclusters have a wide range of catalytic applications, such as the selective oxidation of hydrocarbons. O 2 binding to the catalyst, activation, and release upon reagent oxidation are key events in these catalytic chemistries. Furthermore, these events are expected to be accompanied by significant structural changes of the Cu clusters, because O atoms integrate into the cluster, rather than bind to its surface. Topping the complexity of the problem, partially oxidized Cu clusters are known to exhibit strong fluxionality and feature diverse and interconverting structures and oxygen contents in conditions of oxidative dehydrogenation (ODH). Hence, a significant dynamic coupling between the “hot” O 2 molecule impacting the cluster at reaction temperatures and the cluster fluxionality can be expected. In this work, we focus on the dynamics of dioxygen integration into a partially oxidized Cu cluster supported on hydroxylated amorphous alumina–a system recently reported to be an exceptionally selective catalyst for cyclohexane ODH with very little CO produced, whose mechanistic underpinnings are of utmost interest. The statistics over a swarm of adsorption and scattering trajectories where O 2 hits various sites on the cluster at reaction temperature shows that the O 2 binding does not only follow the minimal energy paths. O 2 also rarely integrates into the cluster in a single step and instead first binds to a single Cu atom via either an η 1 -O 2 or an η 2 -O 2 mode. Surprisingly, this step often has a higher barrier than the subsequent O 2 integration and dissociation, which in turn take multiple steps and complete the oxidation process. Dynamic trajectories starting from the key transition state of integration of the adsorbed O 2 can also lead to different intermediate structures during or right after the dissociation, due to the energy released from the transition state and the thermal intracluster effects. From these activated O 2 chemisorbed structures, O 2 dissociation occurs with moderate barriers (~0.5 eV), producing multiple final oxidized Cu 4 O 4 states. Hence, a diversity of reaction profiles for the attack of supported Cu cluster by O 2 emerges due to the dynamic effects, with implications for mechanisms, kinetic models, and catalyst design principles.
A composite material consisting of polycarbonate filled with copper oxide has been found to be suitable as an antistatic material. This material was developed to satisfy a requirement for an antistatic material that has a mass density less than that of aluminum and that exhibits an acceptably low level of outgassing in a vacuum.
Highlights: • Cu-doped ZnO nanoparticles obtained by chemical synthesis. • Substitutional or interstitial Cu into ZnO lead specific structural, chemical, and optical changes. • Incorporation efficiency of Cu atoms in ZnO as a function of the Cu concentration in the precursor dissolution. - Abstract: In this work a study of ZnO and Cu-doped ZnO nanoparticles obtained by chemical synthesis in aqueous media was carried out. Structural analysis gave the dominant presence of wurtzite ZnO phase forming a solid solution Zn{sub 1−x}Cu{sub x}O. For high Cu doping CuO phase is also present. For low Cu concentration the lattice shrinks due to Cu atoms substitute Zn atoms. For high Cu concentration the lattice enlarges due to predominance of interstitial Cu. From elemental analysis we determined and analyzed the incorporation efficiency of Cu atoms in Zn{sub 1−x}Cu{sub x}O as a function of the Cu concentration in the precursor dissolution. Combining structural and chemical results we described the Cu/Zn precursor concentrations r{sub w} in which the solid solution of Cu in ZnO is predominant. In the region located at r{sub w} ≈ 0.2–0.3 it is no longer valid. For Cu/Zn precursor concentration r{sub w} > 0.3 interstitial Cu dominates, and some amount of copper oxide appears. As the Cu concentration increases, the effective size of nanoparticles decreases. Photoluminescence (PL) measurements of the Cu-doped ZnO nanoparticles were carried out and analyzed.
Single-site copper-based catalysts have shown remarkable activity and selectivity for a variety of reactions. However, deactivation by sintering in high-temperature reducing environments remains a challenge and often limits their use due to irreversible structural changes to the catalyst. Here, we report zeolite-based copper catalysts in which copper oxide agglomerates formed after reaction can be repeatedly redispersed back to single sites using an oxidative treatment in air at 550 °C. Under different environments, single-site copper in Cu–Zn–Y/deAlBeta undergoes dynamic changes in structure and oxidation state that can be tuned to promote the formation of key active sites while minimizing deactivation through Cu sintering. For example, single-site Cu 2+ reduces to Cu 1+ after catalyst pretreatment (270 °C, 101 kPa H 2 ) and further to Cu0 nanoparticles under reaction conditions (270–350 °C, 7 kPa EtOH, 94 kPa H 2 ) or accelerated aging (400–450 °C, 101 kPa H 2 ). After regeneration at 550 °C in air, agglomerated CuO was dispersed back to single sites in the presence and absence of Zn and Y, which was verified by imaging, in situ spectroscopy, and catalytic rate measurements. Ab initio molecular dynamics simulations show that solvation of CuO monomers by water facilitates their transport through the zeolite pore, and condensation of the CuO monomer with a fully protonated silanol nest entraps copper and reforms the single-site structure. Importantly, the capability of silanol nests to trap and stabilize copper single sites under oxidizing conditions could extend the use of single-site copper catalysts to a wider variety of reactions and allows for a simple regeneration strategy for copper single-site catalysts.
The structure of layered Cu/Ni nanowires obtained by template synthesis in 100-nm channels of track membranes has been investigated by transmission and scanning electron microscopy. The phase composition and main structural features of individual nanowires are determined. It is shown that nanowires consist of alternating Ni (Fm3m) and Cu (Fm3m) layers with grains up to 100 nm in size. It is found that nanowires contain also copper oxide crystallites up to 20 nm in size. The elemental composition of individual layers and their mutual arrangement are determined.
The effect of intense femtosecond laser radiation on single-layer graphene fixed on a copper fine-meshed grid is studied using a compact femtosecond electron diffractometer. A modification of the graphene – copper substrate is found. The composition of the resulting compounds is analysed. It is shown that the main new products are copper oxides. The prospects of using such a substrate in the method of ultrafast electron diffraction and microscopy are analysed. (paper)
A model describing heterostructure solar cells based on zinc and copper oxides is developed. Seed layers of ZnO and CuO are synthesized by spray pyrolysis. To form a bulk heterojunction, ZnO nanorods are grown by hydrothermal synthesis. The morphological, electrical and optical properties of the fabricated structures are investigated.
The conversion and utilization of carbon dioxide is a critical challenge for the control of greenhouse gas pollution and in the production of high value chemicals in C1 chemistry. ZrO 2 /Cu(111) is an inverse oxide/metal catalyst that displays high activity and stability for the hydrogenation of CO 2 into methanol at 500-600 K. At elevated temperatures, ZrO 2 grows on a CuO x /Cu(111) substrate forming islands of 10-12 nm in size and an average height of ~ 3 Å. Reaction with H 2 leads to the removal of the copper oxide producing ZrO 2 /Cu(111) surfaces which are very active for the binding and dissociation of CO 2 into CO and C. After exposing ZrO 2 /Cu(111) to moderate or elevated pressures of a CO 2 /H 2 mixture at 300 K, atomic C and minor amounts of CH x O and CO x are deposited on the catalyst surface. The adsorbed CH x O and CO x disappear upon heating above 400 K. The catalytic tests for CO 2 hydrogenation give CO as the main reaction product and CH 4 and CH 3 OH as secondary products. The relative yields of methane and methanol change with time and track the amount of atomic C deposited on the active ZrO 2 /Cu(111) surface. The formation of methane stops once the catalyst surface is saturated with C. Under steady-state conditions, ZrO 2 /Cu(111) is a much better catalyst for methanol synthesis than ZnO/Cu(111). This trend reflects variations in the size of the oxide islands and in the strength of oxide-metal interactions. The use of an inverse oxide/metal configuration is an important synthetic tool when preparing active, selective, and stable catalysts for CO 2 hydrogenation.
Copper oxide nanoparticles, produced by direct plasmochemical synthesis in a low-pressure arc discharge plasma, show a wide variety of magnetic properties depending on the strength of the external magnetic field and the temperature. At low strength of the field and throughout the studied temperature range, the ferromagnetic state dominates. This state is caused by disordering of the spins on the surface of the nanoparticles. At high strength of the field and under temperatures of less than 200 K, nanoparticles exhibit a paramagnetic state due to the spin-glass behavior of copper atoms. At high strength of the field (more than 3 kOe) and under temperatures of above 300 K, the diamagnetic state of nanoparticles is observed, due to local eddy currents caused by oxygen vacancies. The temperature of antiferromagnetic ordering under study is significantly lowered (down to ∼ 100 K).