Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSION RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Microwave-Absorbing Foams with Adjustable Absorption Frequency and Structural Coloration

Microwave-absorbing materials with regulatable absorption frequency and optical camouflage hold great significance in intelligent electronic devices and advanced stealth technology. Herein, we present an innovative microwave-absorbing foam that can dynamically tune microwave absorption frequencies via a simple mechanical compression while in parallel enabling optical camouflage over broad spectral ranges by adjusting the structural colors. In this study, the vivid colors spanning different color categories generated from thin-film interference can be precisely regulated by adjusting the thickness of the conformal TiO 2 coatings on Ni/melamine foam. Enhanced interfacial and defect-induced polarizations resulting from the introduction of TiO 2 coating synergistically contribute to the dielectric attenuation performance. Consequently, such a foam exhibits exceptional microwave absorption capabilities, and the absorption frequency can be dynamically tuned from the S band to the Ku band by manipulating its compression ratio. Additionally, simulation calculations validate the adjustable electromagnetic wave loss behavior, offering valuable insights for the development of next-generation intelligent electromagnetic devices across diverse fields.

36 MATERIALS SCIENCE↗

Energy Conversion in Polyelectrolyte Hydrogels

Using extensive molecular dynamics simulations of polyelectrolyte hydrogels we demonstrate that, on deformation, these hydrogels adjust their deformed state predominantly by altering electrostatic interactions between their charged groups rather than excluded-volume and bond energies. On deformation, due to the hydrogel’s inherent tendency to preserve electroneutrality in its interior, the translational entropy of counterions decreases and the total electrostatic energy becomes more attractive. This result is valid for a wide range of compression ratios and Bjerrum lengths. The change in the electrostatic energy is more marked in highly swollen gels at low ionic strengths. At high Bjerrum lengths, where most of the counterions are condensed on hydrogel chains and the gel resembles a neutral system, the electrostatic-energy change with deformation is weaker.

36 MATERIALS SCIENCE↗

Multi-fuel surrogate chemical kinetic mechanisms for real world applications

The most important driving force for development of detailed chemical kinetic reaction mechanisms in combustion is the desire by researchers to simulate practical systems. Here, this article reviews the parallel evolution of kinetic reaction mechanisms and applications of those models to practical, real engines. Early, quite simple, kinetic models for small fuel molecules were extremely valuable in analyzing long-standing, poorly understood applied ignition and flame quenching problems, and later kinetic models have been applied to much more complex flame propagation, problems including autoignition in spark-ignition engines and issues related to octane numbers and knock in modern, high compression ratio and other engines. The recent emergence of very large, multi-fuel surrogate kinetic mechanisms that can address many different fuel types and real engine applications is discussed as a modern analytical tool that can be used for a wide variety of practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shockwave compression and dissociation of ammonia gas

We performed a series of plate impact experiments on NH 3 gas initially at room temperature and at a pressure of ~100 psi. Shocked states were determined by optical velocimetry and the temperatures by optical pyrometry, yielding compression ratios of ~5–10 and second shock temperatures in excess of 7500 K. A first-principles statistical mechanical (thermochemical) approach that included chemical dissociation yielded reasonable agreement with experimental results on the principal Hugoniot, even with interparticle interactions neglected. Theoretical analysis of reshocked states, which predicts a significant degree of chemical dissociation, showed reasonable agreement with experimental data for higher temperature shots; however, reshock calculations required the use of interaction potentials. Here, we rationalize the very different shock temperatures obtained, relative to previous results for argon, in terms of atomic versus molecular heat capacities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnesium oxide at extreme temperatures and pressures studied with first-principles simulations

We combine two first-principles computer simulation techniques, path integral Monte Carlo and density functional theory molecular dynamics, to determine the equation of state of magnesium oxide in the regime of warm dense matter, with densities ranging from 0.35 to 71 g cm -3 and temperatures ranging from 10 000 K to 5 × 10 8 K. These conditions are relevant for the interiors of giant planets and stars as well as for shock wave compression measurements and inertial confinement fusion experiments. We study the electronic structure of MgO and the ionization mechanisms as a function of density and temperature. We show that the L-shell orbitals of magnesium and oxygen hybridize at high density. This results in a gradual ionization of the L-shell with increasing density and temperature. In this regard, MgO behaves differently from pure oxygen, which is reflected in the shape of the MgO principal shock Hugoniot curve. The curve of oxygen shows two compression maxima, while that of MgO shows only one. We predict a maximum compression ratio of 4.66 to occur for a temperature of 6.73 × 10 7 K. Lastly, we research how multiple shocks and ramp waves can be used to cover a large range of densities and temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong collisionless coupling between an unmagnetized driver plasma and a magnetized background plasma

Fast-exploding plasmas traveling though magnetized, collisionless plasmas can occur in a variety of physical systems, such as supernova remnants, coronal mass ejections, and laser-driven laboratory experiments. To study these systems, it is important to understand the coupling process between the plasmas. Here, in this work, we develop a semi-analytical model of the parameters that characterize the strong collisionless coupling between an unmagnetized driver plasma and a uniformly and perpendicularly magnetized background plasma. In particular, we derive analytical expressions that describe the characteristic diamagnetic cavity and magnetic compression of these systems, such as their corresponding velocities, the compression ratio, and the maximum size of the cavity. The semi-analytical model is compared with collisionless 1D particle-in-cell simulations and experimental results with laser-driven plasmas. The model allows us to provide bounds for parameters that are otherwise difficult to diagnose in experiments with similar setups.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accuracy of Kohn–Sham density functional theory for warm- and hot-dense matter equation of state

We study the accuracy of Kohn–Sham density functional theory (DFT) for warm- and hot-dense matter (WDM and HDM). Specifically, considering a wide range of systems, we perform accurate ab initio molecular dynamics simulations with temperature-independent local/semilocal density functionals to determine the equations of state at compression ratios of 3x–7x and temperatures near 1 MK. We find very good agreement with path integral Monte Carlo benchmarks, while having significantly smaller error bars and smoother data, demonstrating the accuracy of DFT for the study of WDM and HDM at such conditions. In addition, using a Δ-machine learned force field scheme, we confirm that the DFT results are insensitive to the choice of exchange-correlation functional, whether local, semilocal, or nonlocal.

Suryanarayana, Phanish (ORCID:0000000151720049)↗

JUMP CONDITIONS FOR RELATIVISTIC MAGNETOHYDRODYNAMIC SHOCKS IN A GYROTROPIC PLASMA

We study the jump conditions of a relativistic magnetohydrodynamic shock wave in a gyrotropic plasma and solve these relations for a parallel and a perpendicular shock. A closure for the system of jump conditions is obtained by using the constraints of the firehose and mirror instability which operates in anisotropic, gyrotropic plasmas. All postshock quantities are expressed in terms of the compression ratio and dimensionless upstream quantities.

79 ASTRONOMY AND ASTROPHYSICS↗

THE IMPACT OF EFFICIENT PARTICLE ACCELERATION ON THE EVOLUTION OF SUPERNOVA REMNANTS IN THE SEDOV-TAYLOR PHASE

We investigate the effects of the efficient production of cosmic rays (CRs) on the evolution of supernova remnants (SNRs) in the adiabatic Sedov-Taylor phase. We model the SNR by coupling the hydrodynamic evolution with nonlinear diffusive shock acceleration (DSA) and track self-consistently the ionization state of the shock-heated plasma. Using a plasma emissivity code and the results of the model, we predict the thermal X-ray emission and combine it with the non-thermal component in order to obtain the complete spectrum in this energy range. Hence, we study how the interpretation of thermal X-ray observations is affected by the efficiency of the DSA process, and find that, compared to test particle cases, the efficient DSA example yields a smaller shock radius and speed, a larger compression ratio, and lower intensity X-ray thermal emission. We also find that a model where the shock is not assumed to produce CRs can fit the X-ray observational properties of an example with efficient particle acceleration, with a different set of input parameters, and in particular a much lower explosion energy. Additionally, we model the broadband non-thermal emission and investigate what signatures result from the acceleration of particles.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasma physical parameters along CME-driven shocks. II. Observation–simulation comparison

In this work, we compare the spatial distribution of the plasma parameters along the 1999 June 11 coronal mass ejection (CME)-driven shock front with the results obtained from a CME-like event simulated with the FLIPMHD3D code, based on the FLIP-MHD particle-in-cell method. The observational data are retrieved from the combination of white-light coronagraphic data (for the upstream values) and the application of the Rankine–Hugoniot equations (for the downstream values). The comparison shows a higher compression ratio X and Alfvénic Mach number M{sub A} at the shock nose, and a stronger magnetic field deflection d toward the flanks, in agreement with observations. Then, we compare the spatial distribution of M{sub A} with the profiles obtained from the solutions of the shock adiabatic equation relating M{sub A}, X, and θ{sub Bn} (the angle between the upstream magnetic field and the shock front normal) for the special cases of parallel and perpendicular shock, and with a semi-empirical expression for a generically oblique shock. The semi-empirical curve approximates the actual values of M{sub A} very well, if the effects of a non-negligible shock thickness δ{sub sh} and plasma-to magnetic pressure ratio β{sub u} are taken into account throughout the computation. Moreover, the simulated shock turns out to be supercritical at the nose and sub-critical at the flanks. Finally, we develop a new one-dimensional Lagrangian ideal MHD method based on the GrAALE code, to simulate the ion-electron temperature decoupling due to the shock transit. Two models are used, a simple solar wind model and a variable-γ model. Both produce results in agreement with observations, the second one being capable of introducing the physics responsible for the additional electron heating due to secondary effects (collisions, Alfvén waves, etc.).

79 ASTRONOMY AND ASTROPHYSICS↗

Divertor heat flux mitigation in high-performance H-mode discharges in the National Spherical Torus Experiment

Experiments conducted in high-performance 1.0 and 1.2 MA 6 MW NBI-heated H-mode discharges with a high magnetic flux expansion radiative divertor in NSTX demonstrate that significant divertor peak heat flux reduction and access to detachment may be facilitated naturally in a highly shaped spherical torus (ST) configuration. Improved plasma performance with high beta(t) = 15-25%, a high bootstrap current fraction f(BS) = 45-50%, longer plasma pulses and an H-mode regime with smaller ELMs has been achieved in the strongly shaped lower single null configuration with elongation kappa = 2.2-2.4 and triangularity delta = 0.7-0.8. Divertor peak heat fluxes were reduced from 6-12 to 0.5-2 MW m(-2) in ELMy H-mode discharges using the inherently high magnetic flux expansion f(m) = 15-25 and the partial detachment of the outer strike point at several D-2 injection rates. A good core confinement and pedestal characteristics were maintained, while the core carbon concentration and the associated Z(eff) were reduced. The partially detached divertor regime was characterized by an increase in divertor radiated power, a reduction in ion flux to the plate and a large neutral compression ratio. Spectroscopic measurements indicated the formation of a high-density, low-temperature region adjacent to the outer strike point, where substantial increases in the volume recombination rate and C II, CIII emission rates were measured.

Soukhanovskii, V. A.↗

A robust plasma-based laser amplifier via stimulated Brillouin scattering

Brillouin amplification in plasma is more resilient to fluctuations in the laser and plasma parameters than Raman amplification, making it an attractive alternative to Raman amplification. In this work, we focus on high plasma densities, n 0 > n cr /4, where stimulated Raman scattering is not possible and laser beam filamentation is the dominant competing process. Through analytic theory and multi-dimensional particle-in-cell simulations, we identify a parameter regime for which Brillouin amplification can be efficient while maintaining filamentation of the probe at a controlled level. We demonstrate pump-to-probe compression ratios of up to 72 and peak amplified probe fluences over 1 kJ cm -2 with ≃50% efficiency. High pulse quality is maintained through control of parasitic filamentation, enabling operation at large beam diameters. Provided the pump and probe pulse diameters can be increased to 1 mm, our results suggest that Brillouin amplification can be used to produce sub-picosecond pulses of petawatt power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SnowPac : a multiscale cubic B-spline wavelet compressor for astronomical images

ABSTRACT As more advanced and complex survey telescopes are developed, the size and scale of data being captured grows at increasing rates. Across various domains, data compression through wavelets has enabled the reduction of data size and increase in computation efficiency. In this paper, we provide qualitative and quantitative tests of a new wavelet-based image compression method compared against the current standard for astronomical images. The analysis is improved by making use of state-of-the-art object detection systems to accurately measure the impact of the compression. We find that a combination of lossy wavelet-based methods, efficient quantization, and lossless dictionary compressors can preserve up to 98 per cent of astronomical objects at a 10:1 compression ratio. This significant reduction in file size also preserves astronomical object properties better than existing methods. These methods help further reduce future workloads for image-heavy processing pipelines.

Pulido, Jesus↗

Path integral Monte Carlo and density functional molecular dynamics simulations of warm dense MgSiO 3

In order to provide a comprehensive theoretical description of MgSiO 3 at extreme conditions, we combine results from path integral Monte Carlo and density functional molecular dynamics simulations and generate a consistent equation of state for this material. We consider a wide range of temperature and density conditions from 10 4 to 10 8 K and from 0.321 to 64.2 g/cm -3 (0.1- to 20-fold the ambient density). We study how the L and K shell electrons are ionized with increasing temperature and pressure. We derive the shock Hugoniot curve and compare with experimental results. Our Hugoniot curve is in good agreement with the experiments, and we predict a broad compression maximum that is dominated by the K shell ionization of all three nuclei while the peak compression ratio of 4.70 is obtained when the Si and Mg nuclei are ionized. To conclude, we analyze the heat capacity and structural properties of the liquid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equation of state of boron nitride combining computation, modeling, and experiment

The equation of state (EOS) of materials at warm dense conditions poses significant challenges to both theory and experiment. We report a combined computational, modeling, and experimental investigation leveraging new theoretical and experimental capabilities to investigate warm-dense boron nitride (BN). The simulation methodologies include path integral Monte Carlo (PIMC), several density functional theory (DFT) molecular dynamics methods [plane-wave pseudopotential, Fermi operator expansion (FOE), and spectral quadrature (SQ)], activity expansion (actex), and all-electron Green's function Korringa-Kohn-Rostoker (mecca), and compute the pressure and internal energy of BN over a broad range of densities and temperatures. Our experiments were conducted at the Omega laser facility and the Hugoniot response of BN to unprecedented pressures (1200–2650 GPa). The EOSs computed using different methods cross validate one another in the warm-dense matter regime, and the experimental Hugoniot data are in good agreement with our theoretical predictions. By comparing the EOS results from different methods, we assess that the largest discrepancies between theoretical predictions are ≲ 4% in pressure and ≲ 3% in energy and occur at 10 6 K, slightly below the peak compression that corresponds to the K -shell ionization regime. At these conditions, we find remarkable consistency between the EOS from DFT calculations performed on different platforms and using different exchange-correlation functionals and those from PIMC using free-particle nodes. This provides strong evidence for the accuracy of both PIMC and DFT in the high-pressure, high-temperature regime. Moreover, the recently developed SQ and FOE methods produce EOS data that have significantly smaller statistical error bars than PIMC, and so represent significant advances for efficient computation at high temperatures. The shock Hugoniot predicted by PIMC, actex, and mecca shows a maximum compression ratio of 4.55 ± 0.05 for an initial density of 2.26 g/cm 3 , higher than the Thomas-Fermi predictions by about 5%. In addition, we construct tabular EOS models that are consistent with the first-principles simulations and the experimental data. Our findings clarify the ionic and electronic structure of BN over a broad range of temperatures and densities and quantify their roles in the EOS and properties of this material. The tabular models may be utilized for future simulations of laser-driven experiments that include BN as a candidate ablator material.

36 MATERIALS SCIENCE↗

First-principles equation of state of CHON resin for inertial confinement fusion applications

A wide-range (0 to 1044.0 g/ cm 3 and 0 to 10 9 K) equation-of-state (EOS) table for a CH 1.72 O 0.37 N 0.086 quaternary compound has been constructed based on density-functional theory (DFT) molecular-dynamics (MD) calculations using a combination of Kohn-Sham DFT MD, orbital-free DFT MD, and numerical extrapolation. The first-principles EOS data are compared with predictions of simple models, including the fully ionized ideal gas and the Fermi-degenerate electron gas models, to chart their temperature-density conditions of applicability. The shock Hugoniot, thermodynamic properties, and bulk sound velocities are predicted based on the EOS table and compared to those of C-H compounds. The Hugoniot results show the maximum compression ratio of the C-H-O-N resin is larger than that of CH polystyrene due to the existence of oxygen and nitrogen; while the other properties are similar between CHON and CH. Radiation hydrodynamic simulations have been performed using the table for inertial confinement fusion targets with a CHON ablator and compared with a similar design with CH. Here, the simulations show CHON outperforms CH as the ablator for laser-direct-drive target designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Performance Indirect-Drive Cryogenic Implosions at High Adiabat on the National Ignition Facility

To reach the pressures and densities required for ignition, it may be necessary to develop an approach to design that makes it easier for simulations to guide experiments. Here, we report on a new short-pulse inertial confinement fusion platform that is specifically designed to be more predictable. Furthermore, the platform has demonstrated 99%+0.5% laser coupling into the hohlraum, high implosion velocity (411 km/s), high hotspot pressure (220+60 Gbar), and high cold fuel areal density compression ratio (>400), while maintaining controlled implosion symmetry, providing a promising new physics platform to study ignition physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamical Sketching for Enhanced Communication Efficiency in Federated Learning

Federated learning (FL) has revolutionized distributed machine learning by enabling collaborative model training without sharing local data. However, communication efficiency and privacy guarantees remain significant challenges. This paper introduces a dynamic sketching mechanism in FL, optimizing the trade-off between communication efficiency and model accuracy. By dynamically selecting the sketch matrix size, our approach adapts to the evolving characteristics of the data and the model, ensuring optimal performance across diverse scenarios. We leverage Bayesian optimization to systematically tune the sketch parameters, achieving an effective balance between resource efficiency and model performance. Experimental results on the MNIST dataset using a convolutional neural network (CNN) architecture validate the proposed method's efficiency and scalability. Our dynamic sketching approach significantly outperforms fixed-size sketching techniques, achieving higher compression ratios (up to 62x) and providing better privacy guarantees while maintaining high model accuracy. These findings highlight the robustness and versatility of our approach and make it a valuable solution for privacy-preserving, communication-efficient federated learning.

Afrose, Sharmin [ORNL]↗