Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CO 2 -EOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

THz-range Faraday rotation in the Weyl semimetal candidate Co 2 TiGe

The Co 2 family of ferromagnetic Heusler alloys has attracted interest due to their fully spin-polarized nature, making them ideal for applications in spintronic devices. More recently, the existence of room temperature time-reversal-breaking Weyl nodes near the Fermi level was predicted and confirmed in these systems. As a result of the presence of these Weyl nodes, these systems possess a non-zero momentum space Berry curvature that can dramatically influence transport properties such as the anomalous Hall effect. One of these candidate compounds is Co 2 TiGe. Recently, high-quality molecular beam epitaxy-grown thin films of Co 2 TiGe have become available. In this work, we present a THz-range measurement of MBE-grown Co 2 TiGe films. We measure the THz-range Faraday rotation, which can be understood as a measure of the anomalous Hall effect. We supplement this work with electronic band-structure calculations showing that the principal contribution to the anomalous Hall effect in this material stems from the Berry curvature of the material. Overall, our work shows that this class of Heusler materials shows promise for Weyl semimetal based spintronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Covalent Functionalization of Silicon with Plasma-Grown “Fuzzy” Graphene: Robust Aqueous Photoelectrodes for CO 2 Reduction by Molecular Catalysts

Carbon electrodes are ideal for electrochemistry with molecular catalysts, exhibiting facile charge transfer and good stability. Yet for solar-driven catalysis with semiconductor light absorbers, stable semiconductor/carbon interfaces can be difficult to achieve, and carbon’s high optical extinction means it can only be used in ultrathin layers. Here, we demonstrate a plasma-enhanced chemical vapor deposition process that achieves well-controlled deposition of out-of-plane “fuzzy” graphene (FG) on thermally oxidized Si substrates. The resulting Si|FG interfaces possess a silicon oxycarbide (SiOC) interfacial layer, implying covalent bonding between Si and the FG film that is consistent with the mechanical robustness observed from the films. The FG layer is uniform and tunable in thickness and optical transparency by deposition time. Using p-type Si|FG substrates, noncovalent immobilization of cobalt phthalocyanine (CoPc) molecular catalysts was employed for the photoelectrochemical reduction of CO 2 in aqueous solution. The Si|FG|CoPc photocathodes exhibited good catalytic activity, yielding a current density of ∼1 mA/cm 2 , Faradaic efficiency for CO of ∼70% (balance H 2 ), and stable photocurrent for at least 30 h at −1.5 V vs Ag/AgCl under 1-sun illumination. Furthermore, the results suggest that plasma-deposited FG is a robust carbon electrode for molecular catalysts and suitable for further development of aqueous-stable Si photocathodes for CO 2 reduction.

CO2 reduction↗
DOE OSTI2021

Hysteresis curves reveal the microscopic origin of cooperative CO 2 adsorption in diamine-appended metal–organic frameworks

Diamine-appended metal-organic frameworks (MOFs) of the form Mg 2 (dobpdc)(diamine) 2 adsorb CO 2 in a cooperative fashion, exhibiting an abrupt change in CO 2 occupancy with pressure or temperature. This change is accompanied by hysteresis. While hysteresis is suggestive of a first-order phase transition, we show that hysteretic temperature-occupancy curves associated with this material are qualitatively unlike the curves seen in the presence of a phase transition; they are instead consistent with CO 2 chain polymerization, within one-dimensional channels in the MOF, in the absence of a phase transition. Here, our simulations of a microscopic model reproduce this dynamics, providing a physical understanding of cooperative adsorption in this industrially important class of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Elucidating Mass Transport Regimes in Gas Diffusion Electrodes for CO 2 Electroreduction

Gas diffusion electrodes (GDEs) have shown promising performance for the electrochemical reduction of CO 2 (CO 2 R). In this study, a resolved, pore scale model of electrochemical reduction of CO 2 within a liquid-filled catalyst layer is developed. Three CO 2 mass transport regimes are identified in which the CO 2 penetration depth is controlled by CO 2 consumption in the electrolyte, CO 2 conversion along the solid-electrolyte double-phase boundaries (DPBs), and CO 2 conversion concentrated around the gas–solid–electrolyte triple-phase boundaries (TPBs). While it is possible for CO 2 R to be localized around the TPBs, in systems with submicron pore radii operating at <1 A cm –2 CO 2 R will be distributed across the DPBs within the catalyst layer. This validates the assumption of pore-scale uniformity implicit in popular, volume-averaged GDE models. Overall, the CO 2 conversion efficiency depends strongly on the governing mass transport regime, and operational-phase diagrams are constructed to guide the catalyst layer design.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Plasma-Assisted Catalytic Conversion of CO 2 and Propane to Propylene and CO

Ethylene and propylene are critical pillars of the petrochemical and plastics industry. The current industrial route for producing these olefins, which is via steam cracking process, is extremely endothermic and highly CO 2 -intensive. In this work, Susteon, in partnership with the North Carolina State University (NCSU), New Castle University (NU), and SoCalGas, has investigate catalytic materials and process designs to produce propylene from propane by utilizing CO 2 as a soft oxidant in the presence of low temperature dielectric barrier discharge plasma. This route integrates the effect of catalysis and the presence of a plasma environment to intensify the production of the important three carbon olefin from propane at a lower temperature and near atmospheric pressure. This CO 2 oxidative dehydrogenation (CO 2 -ODH) process coproduces CO, which is a valuable by-product, critical for the petrochemical sector. Through this work, Susteon and the team have made significant progress in developing catalysts and gaining insights on the plasma-assisted CO 2 -ODH process.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Techno-economic and life cycle analysis of synthetic natural gas production from low-carbon H 2 and point-source or atmospheric CO 2 in the United States

Synthetic natural gas (SNG) is of great interest in reducing fossil energy consumption while maintaining compatibility with existing NG infrastructure and end-use applications equipment. SNG can be produced using clean H 2 generated from renewable or nuclear energy and CO 2 captured from stationary sources or the atmosphere. In this study, we develop an engineering process model of SNG production using Aspen Plus® and production scales reported by the industry. We examine the levelized cost and life cycle greenhouse gas (GHG) emissions of SNG production under various CO 2 supply scenarios. Considering the higher cost of H 2 transportation compared with CO 2 transportation, we assume that CO 2 feedstock is transported via pipeline to the H 2 production location, which is collocated with the SNG plant. We also evaluate the cost of CO 2 captured from the atmosphere, assuming the direct air capture process can occur near the SNG facility. Depending on the CO 2 supply chain, the levelized cost of SNG is estimated to be in the range of $\$45–76$ per million British thermal units (MMBtu) on a higher heating value (HHV) basis. The SNG production cost may be reduced to $\$27–57$/MMBtu-HHV by applying a tax credit available in the United States for low-carbon H 2 production (45V). With a lower electricity price of 3¢/kWh for water electrolysis and accounting for a 45V tax credit, the SNG cost reaches parity with the cost of fossil NG. Depending on the CO 2 supply chain, SNG can reduce life cycle GHG emissions by 52–88% compared with fossil NG.

03 NATURAL GAS↗
DOE OSTI2024

Pronounced reduction in the regeneration energy of potassium sarcosinate CO 2 capture solvent using TiO 2

Absorption-based CO 2 capture technologies face economic feasibility concerns due to the exceedingly high energy requirements of solvent regeneration. Among various proposed solutions, solid acid-aided solvent regeneration stands out as a promising approach. Studies have shown that solid materials containing Lewis and Brønsted acid sites can facilitate deprotonation of protonated amine and breakdown of carbamate molecules, which significantly increases CO 2 desorption rate and decreases regeneration energy of common solvents such as MEA and DEA. However, the influence of solid acids on alternate solvents such as amino acids is not well known. Here, we report the performance of TiO 2 for the regeneration of CO 2 -loaded aqueous potassium sarcosinate (K-Sar) solvent. K-Sar is an environmentally friendly amino-acid salt that provides high CO 2 absorption rates, making it a good candidate for both point-source and direct-air capture. TiO 2 is hydrothermally stable and contains high surface acid site concentration. Desorption of CO 2 from K-Sar starts at room temperature in the presence of TiO 2 , while such onset temperature is greater than 70°C for regeneration without TiO 2 . Further, at a temperature of 95°C, the maximum CO 2 desorption rate and cumulative CO 2 removal increase by 128% and 91%, respectively, in the presence of TiO 2 compared to the no TiO 2 case. The total regeneration energy could be reduced by ~ 50% with TiO 2 , showcasing the significant role this process can take in improving the commercial competitiveness of absorption-based CO 2 capture. Further characterization with XRD, SEM, and NMR concluded that neither the TiO 2 powder nor the solvent undergoes any physical or chemical degradation in the regeneration process, suggesting the potential of their long-term usability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural Transformation and Degradation of Cu Oxide Nanocatalysts during Electrochemical CO 2 Reduction

The electrochemical CO 2 reduction reaction (CO 2 RR) holds enormous potential as a carbon-neutral route to the sustainable production of fuels and platform chemicals. The durability for long-term operation is currently inadequate for commercialization, however, and the underlying deactivation process remains elusive. A fundamental understanding of the degradation mechanism of electrocatalysts, which can dictate the overall device performance, is needed. In this work, we report the structural dynamics and degradation pathway of Cu oxide nanoparticles (CuO x NPs) during the CO 2 RR by using in situ small-angle X-ray scattering (SAXS) and X-ray absorption spectroscopy (XAS). The in situ SAXS reveals a reduction in the size of NPs when subjected to a potential at which no reaction products are detected. At potentials where the CO 2 RR starts to occur, CuO x NPs are agglomerated through a particle migration and coalescence process in the early stage of the reaction, followed by Ostwald ripening (OR) as the dominant degradation mechanism for the remainder of the reaction. As the applied potential becomes more negative, the OR process becomes more dominant, and for the most negative applied potential, OR dominates for the entire reaction time. The morphological changes are linked to a gradual decrease in the formation rate for multicarbon products (C 2 H 4 and ethanol). Other reaction parameters, including reaction intermediates and local high pH, induce changes in the agglomeration process and final morphology of the CuO x NPs electrode, supported by post-mortem ex situ microscopic analysis. The in situ XAS analysis suggests that the CuO x NPs reduced into the metallic state before the structural transformation was observed. The introduction of high surface area carbon supports with ionomer coating mitigates the degree of structural transformation and detachment of the CuO x NPs electrode. These findings show the dynamic nature of Cu nanocatalysts during the CO 2 RR and can serve as a rational guideline toward a stable catalyst system under electrochemical conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thermodynamic modeling of calcium carbonate scale precipitation: aqueous Na + -Ca 2+ -Cl – -HCO 3 – -CO 3 2– -CO 2 system

To allow for accurate calculations of calcium carbonate scaling in highly saline produced waters, we present a comprehensive thermodynamic model based on the electrolyte nonrandom two-liquid (eNRTL) activity coefficient equation for the aqueous Na ⁺ -Ca ²⁺ -Cl – -HCO 3 – -CO 3 ²– -CO 2 system. The eNRTL binary interaction parameters for the H 2 O:(Na ⁺ -CO 3 2– ) pair, the H 2 O:(Na ⁺ -HCO 3 – ) pair, the (Na⁺-Cl–):(Na ⁺ -CO 3 2– ) pair, and the (Na ⁺ -Cl – ):(Na ⁺ -HCO 3 – ) pair are identified in this work via the regression of thermodynamic, calorimetric, and phase equilibria experimental data. The binary interaction parameters associated with the H 2 O:(Na ⁺ -Cl – ) pair, the CO 2 :(Na ⁺ -Cl – ) pair, the H 2 O:(Ca ²⁺ -Cl – ) pair, and the (Na ⁺ -Cl – ):(Ca ²⁺ -Cl – ) pair are retrieved from the literature. The remaining binary interaction parameters are retrieved from Aspen Plus or set to zero. In addition, the solubility product constants are identified for Na 2 CO 3 ·10H 2 O (s) , Na 2 CO 3 · 7H 2 O (s) , Na 2 CO 3 ·H 2 O (s) , Na 2 CO 3 ·NaHCO 3 2H 2 O (s) , Na 2 CO 3 ·3NaHCO 3 (s) , and CaCO 3(s) via regression of solubility data. Here, the model is capable of accurately calculating all phase equilibria and calorimetric properties at temperatures up to 473.15 K and salt concentrations up to saturation.

42 ENGINEERING↗
DOE OSTI2022

Mechanisms of Complete Dissociation of CO 2 on Iron Clusters

Dissociation of CO 2 on iron clusters was studied by using semilocal density functional theory and basis sets of triple-zeta quality. Fe 2 , Fe 4 , and Fe 16 clusters were selected as the representative host clusters. When searching for isomers of Fe n CO 2 , n=2, 4 and 16 corresponding to carbon dioxide attachment to the host clusters, its reduction to O and CO, and to the complete dissociation, it was found that the total spin magnetic moments of the lowest energy states of the isomers are often quenched with respect to those of initial reagents Fe n +CO 2 . Dissociation pathways of the Fe 2 +CO 2 , Fe 4 +CO 2 , and Fe 16 +CO 2 reactions contain several transition states separated by the local minima states; therefore, a natural question is where do the spin flips occur? Since lifetimes of magnetically excited states were shown to be of the order of 100 fs, the search for the CO 2 dissociation pathways was performed under the assumption that magnetic deexcitation may occur at the intermediate local minima. Two dissociation pathways were obtained for each Fe n +CO 2 reaction using the gradient-based methods. It was found that the Fe 2 +CO 2 reaction is endothermic with respect to both reduction and complete dissociation of CO 2 , whereas the Fe 4 +CO 2 and Fe 16 +CO 2 reactions are exothermic to both reduction and complete dissociation of carbon dioxide. Finally, the CO 2 reduction was found to be more favorable than its complete dissociation in the Fe 4 case.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Amorphous CeO 2 –Cu Heterostructure Enhances CO 2 Electroreduction to Multicarbon Alcohols

Electrochemical conversion of carbon dioxide (CO 2 ) gas to value-added chemicals such as multicarbon (C 2+ ) alcohols is a promising and attractive decarbonization strategy. However, there are tremendous challenges in tuning the intrinsic activity and selectivity of the catalysts to produce C 2+ alcohols. In this work, we prepared a CeO 2 –Cu composite catalyst via a combination of metallurgy and dealloying method. The interfacial sites of amorphous CeO 2 –Cu heterostructure improve the adsorption of key reaction intermediates *CO and promote the C–C coupling. Significantly, they also stabilize *CH 2 CHO at the bifurcation step, steering the reaction pathway toward the formation of C 2+ alcohols over ethylene. The CeO 2 –Cu catalyst achieves a remarkable faradaic efficiency of 32.9% ± 2.6% for C 2+ alcohols at -0.6 V vs RHE. Overall, this work demonstrates an effective strategy of improving the intrinsic activity and selectivity of the Cu-based catalysts for the generation of C 2+ alcohols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High-temperature Raman spectroscopy of K 2 Ca(CO 3 ) 2 bütschliite and Na 2 Ca 2 (CO 3 ) 3 shortite

Raman spectra of Na 2 Ca 2 (CO 3 ) 3 shortite and K 2 Ca(CO 3 ) 2 bütschliite were measured to 715°C and 740°C respectively, under vacuum. The vibrational spectra demonstrate that shortite converts to nyerereite (Na 2 Ca(CO 3 ) 2 ) and calcite at 535°C. This assemblage is stable to ~700°C, where nyerereite begins to decompose. Bütschliite converts to the isochemical phase fairchildite at 570°C, which is stable to 665°C, where it decomposes to an assemblage of K 2 CO 3 and CaO. The variation of anharmonicity between different vibrational modes of each of the low temperature phases is assessed, and these yield insights into inter-carbonate group couplings. In conclusion, both fairchildite and nyerereite exhibit spectral features consistent with extensive disordering.

58 GEOSCIENCES↗
DOE OSTI2025

Synthesis and structural characterization of 2,2′:6′,2″-terpyridine zinc formate: Hydroboration and hydrosilylation of CO 2 and carbonyl compounds

The zinc formate compound (terpy)Zn(O 2 CH) 2 is obtained via the reaction of Zn(O 2 CH) 2 with 2,2′:6′,2″-terpyridine (terpy) and has been structurally characterized by X-ray diffraction as possessing formate ligands that coordinate via a κ 1 -monodentate coordination mode, which is in accord with IR spectroscopic studies. In terms of reactivity, (terpy)Zn(O 2 CH) 2 participates in catalytic transformations involving CO 2 and carbonyl compounds via hydrosilylation and hydroboration reactions. For example, (terpy)Zn(O 2 CH) 2 achieves hydroboration of Me 2 CO and Ph 2 CO by HBpin to afford R 2 C(H)OBpin, and triple insertion of Ph 2 CO, PhC(O)Me, Me 2 CO and PhCHO into the Si–H bonds of PhSiH 3 to afford PhSi[OCH(R)R’] 3 . In addition, CO 2 also undergoes hydroboration and hydrosilylation by HBpin and (MeO) 3 SiH in the presence of (terpy)Zn(O 2 CH) 2 to afford HCO 2 Bpin and HCO 2 Si(OMe) 3 , respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Source of 12 C in Calvin–Benson cycle intermediates and isoprene emitted from plant leaves fed with 13 CO 2

Feeding 14 CO 2 was crucial to uncovering the path of carbon in photosynthesis. Feeding 13 CO 2 to photosynthesizing leaves emitting isoprene has been used to develop hypotheses about the sources of carbon for the methylerythritol 4-phosphate pathway, which makes the precursors for terpene synthesis in chloroplasts and bacteria. Both photosynthesis and isoprene studies found that products label very quickly (<10 min) up to 80–90% but the last 10–20% of labeling requires hours indicating a source of 12 C during photosynthesis and isoprene emission. Furthermore, studies with isoprene showed that the proportion of slow label could vary significantly. This was interpreted as a variable contribution of carbon from sources other than the Calvin–Benson cycle (CBC) feeding the methylerythritol 4-phosphate pathway. Here, we measured the degree of label in isoprene and photosynthetic metabolites 20 min after beginning to feed 13 CO 2 . Isoprene labeling was the same as labeling of photosynthesis intermediates. High temperature reduced the label in isoprene and photosynthesis intermediates by the same amount indicating no role for alternative carbon sources for isoprene. A model assuming glucose, fructose, and/or sucrose reenters the CBC as ribulose 5-phosphate through a cytosolic shunt involving glucose 6-phosphate dehydrogenase was consistent with the observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Sulfur-Enriched Nanoporous Carbon: A Novel Approach to CO 2 Adsorption

Carbon dioxide (CO 2 ) intake plays a vital role in sustaining the environmental balance by influencing global carbon dynamics and climatic stability. This work addresses the production of sulfur-doped porous nanocarbons (SDCs) as prospective sorbents for CO 2 capture. SDCs were fabricated by utilizing coconut shell as a carbon precursor and potassium persulfate as both a chemical activating agent and a sulfur dopant. The incorporation of sulfur functionalities into carbon matrices creates structural variability and active sites, boosting CO 2 absorption capabilities. Sulfur's peculiar electrical structure allows greater intermolecular interactions with CO 2 , enhancing adsorption affinities. According to the experimental data, the CO 2 uptake was best measured as 3.37 mmol/g at 0(degrees)C and 1 bar and 2.56 mmol/g at 25 C-degrees and 1 bar. The results show that the higher porosity of SDC materials adds to a large amplification in the CO 2 uptake capability. The work underlines the delicate interaction between sulfur doping, morphological porosity, and surface reactivity in enhancing the effectiveness of CO 2 sequestration. SDC materials hold considerable promise in tackling the present ecological concerns and developing CO 2 collection techniques. The suggested single-step synthesis technique described here provides a sustainable and environmentally friendly method for synthesizing SDCs for carbon capture applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗