Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Transmission electron microscopy of the 'LOW-CA' hydrated interplanetary dust particle

Transmission electron microscopy of a hydrated interplanetary dust particle indicates that it consists largely of a poorly crystalline phyllosilicate containing Fe, Mg and Al with an interlayer spacing of 10 to 12 A and so is distinct from the major phyllosilicate in CI and CM carbonaceous chondrites. The silicate is probably an Fe- and Mg-rich smectite or mica. Submicron, spherical to euhedral pyrrhotite and pentlandite are prominent. Unusual, low-Ni pentlandite is also common and typically occurs as rectangular platelets. Unlike many chondritic interplanetary dust particles, olivine is rare and pyroxene was not observed. Other less abundant phases are magnetite, chromite, and an unidentified phase containing Fe, Mg, Si, Ca, and Mn. This particle differs from a hydrated micrometeorite described previously by Brownlee (1978), indicating there are mineralogically different subsets of hydrated interplanetary dust particles. Despite gross similarities in mineralogy between the particle and the carbonaceous chondrites, they show appreciable differences in detail.

Tomeoka, K.↗

A model for core formation in the early Earth

Two basic types exogenous models were proposed to account for siderophile and chalcophile element abundances in the Earth's upper mantle. The first model requires that the Earth be depleted in volatiles and that, after a core formation event which extracted the most siderophile elements into the core, additional noble siderophile elements (Pt, Ir, Au) were added as a late veneer and mixed into the mantle. The second model postulates a reduced Earth with approximately CI elemental abundances in which a primary core forming event depleted all siderophile elements in the mantle. The plausibility of models which require fine scale mixing of chondritic material into the upper mantle is analyzed. Mixing in liquids is more efficient, but large degrees of silicate partial melting will facilitate the separation of magma from residual solids. Any external events affecting the upper mantle of the Earth should also be evident in the Moon; but siderophile and chalcophile element abundance patterns inferred for the mantles of the Earth and Moon differ. There appear to be significant physical difficulties associated with chondritic veneer models.

Jones, J. H.↗

Relationships between chondritic meteorites and planets

Chondrites formed in the solar nebula prior to the formation of planets; they probably constituted the bulk of preplanetary solids in the inner solar system. In the highly reduced enstatite chondrites 10% of Si is metallic; in the highly oxidized CM and CI chondrites 20-30% of Fe is in the +3 state. The high density of Mercury implies that nebular Fe was reduced, whereas the low density of Mars indicates that a large fraction was oxidized. Most rare gases in the terrestrial planets seem to have accreted trapped in grains; Venusian interelement ratios resemble those in enstatite chondrites; Earth and Mars ratios are more like those in ordinary or carbonaceous chondrites. These observations imply that enstatite chondrites formed near the Sun (near Venus?), the carbonaceous chondrites formed far from the Sun, the ordinary chondrites at an intermediate location. Compositional data on Mercury, comets, an asteroidal fragment, and the moons of Mars are badly needed.

Wasson, J. T.↗

Nebular volatile fractionations associated with chondrule formation

Chondrules are ubiquitous constituents of primitive solar system matter, indicating that chondrule formation was an important and widespread process in the early history of the solar system. If chondrules formed from fine grained CI like precursors, some volatile fractionation must have accompanied chondrule formation. This is not likely related to a separation of chondrules from gas (and dust, fine enough to be coupled to gas) shortly after formation, a process required by most models of chondrule formation. If chondrules are continuously formed in and removed from a region of the solar nebula, the chemical environment in this region will change. Vaporization of solid increases both oxygen and sulfur in the gas relative to H. Depending on the oxygen/sulfur ratio, which may vary widely as a function of precursor composition and temperature, two cases can be distinguished: (1) sulfur requires reaction with solid to condense, and thus may become much more enriched than 0; (2) if a significant amount of silicate is vaporized together with sulfides and does not recondense, changes in H/O outweigh S enrichment. In combination, these two effects may be able to account for much of the chemical variation among various types of chondrites. Opaque, fine grained matrix in unequilibrated chondrites, which is thought to derive from dust, has indeed been found to have a volatile element abundance complementary to chondrules.

Kracher, A.↗

Minor-element signature of relic olivine grains in deep-sea particles - A match with forsterites from C2 meteorites

The results of high-precision electron microprobe analyses on relic forsterites in 13 different deep sea particles (DSP) are described, comparing their 'minor' element (Mn, Cr, Ca, Ti, Al) signatures with those of olivines found in several types of meteorites. The results show that the DSP olivines do not match those from terrestrial and lunar rocks and achondritic meteoroties, match poorly those of the carbonaceous Allende (CV3) and Orgeuil (CI) meteorites, but are well matched with olivines from C2 meteorites, including the unusual Belgica 7904 meteorite.

Steele, I. M.↗

Calculation of pressure broadening parameters for the CO-He system at low temperatures

Theoretical pressure broadening parameters were computed for the 0-1 and 1-2 rotational transitions of CO in He at very low temperatures and compared with the recent experimental measurements at 4.2 K. The interaction potential was taken from extensive SCF-CI calculations, molecular collision dynamics were described by essentially exact converged close coupling calculations, and pressure broadening cross sections were obtained from the collisional S matrices within the accurate Fano-Ben Reuven framework. Resonances at low collision energies give rise to an increase in the thermally averaged cross sections at low temperatures. Although previous calculations for this system at higher temperatures (77-300 K) were in good accord with experiment, at 4.2 K predicted values are about two times larger than experiment; possible sources of this discrepancy are discussed.

Green, S.↗

The lower electronic states of ClOO - A computational investigation

Eight doublet and eight quartet states of ClOO were investigated by ab initio CI techniques. The potential energy surfaces of the four lowest energy doublet states of both A-double-prime and A-prime symmetry indicate that only the 1 2A-double-prime state is bound. In contrast to the model provided by the HO2 radical, all of the excited doublet states investigated were repulsive with respect to dissociation to Cl + O2 and metastable or bound with respect to dissociation to ClO + O. The transitions to the excited states investigated span the visible and near UV spectral regions, but the transition moments indicate that they are very weak. Since the photolysis products are the same as those of the rapid thermal dissociation, photolysis is not expected to be an important atmospheric process. The soft bending potential for the 1 2A-prime state and the shape of the 1 4A-double-prime state in the entrance channel of the ClO + O yields Cl + O2 reaction provide a qualitative explanation for the underprediction of the low temperature reaction rate by previous trajectory calculations.

Jafri, J. A.↗

Molecular processes in a high temperature shock layer

The development of techniques for the calculation of electron capture widths, electronic wave functions, cross sections and rates needed for the description of the dissociative recombination (DR) of molecular ions with electrons were described. The cross sections and rates were calculated by using harmonic oscillator wave functions for the ion and a delta function approximation for the continuum vibrational wave function in the repulsive dissociative channel. In order to obtain DR cross sections of quantitative accuracy, a computer program which solves the one dimensional nuclear motion wave equation was revised to calculate the cross sections and rates. The program and the new results are described. Included is a discussion of large windows found in the dissociative recombination cross sections from excited ion vibrational levels. These windows have not been previously reported in the literature. The magnitude of the DR cross sections for several dissociative routes are sensitive to the location of the crossing of the neutral and ion potential curves. Studies of the effects of basis set and CI wave function size on vertical excitation energies are described. Preliminary studies on N2 and O2 using large scale wave functions are also reported.

Guberman, S. L.↗

On the extension of the MCSCF/CI method

Research conducted during this period was focused on two main areas: (1) bonding in transition metal oxides; and (2) adsorption of CO on Al and Ni. In both of these theoretical studies a major interest was to obtain a better understanding of the nature of the bonding in transition metal containing systems. The studies used self consistent field (SCF), multi-configuration self cosistent field (MCSCF) and configuration interaction (CI) methods in the treatment of the transition metal oxides and only the SCF method in the adsorption studies. The reports of three principle investigators who contributed to this work during the tenure of the project are presented along with associated published papers.

Bauschlicher, C., Jr.↗

Integral processing in beyond-Hartree-Fock calculations

The increasing rate at which improvements in processing capacity outstrip improvements in input/output performance of large computers has led to recent attempts to bypass generation of a disk-based integral file. The direct self-consistent field (SCF) method of Almlof and co-workers represents a very successful implementation of this approach. This paper is concerned with the extension of this general approach to configuration interaction (CI) and multiconfiguration-self-consistent field (MCSCF) calculations. After a discussion of the particular types of molecular orbital (MO) integrals for which -- at least for most current generation machines -- disk-based storage seems unavoidable, it is shown how all the necessary integrals can be obtained as matrix elements of Coulomb and exchange operators that can be calculated using a direct approach. Computational implementations of such a scheme are discussed.

Taylor, P. R.↗

Laser microprobe study of cosmic dust (IDPs) and potential source materials

The study of cosmic dust or interplanetary dust particles (IDP) can provide vital information about primitive materials derived primarily from comets and asteroids along with a small unknown fraction from the nearby interstellar medium. The study of these particles can enhance our understanding of comets along with the decoding of the history of the early solar system. In addition the study of the cosmic dust for IDP particles can assist in the elucidation of the cosmic history of the organogenic elements which are vital to life processes. Studies to date on these particles have shown that they are complex, heterogeneous assemblages of both amorphous and crystalline components. In order to understand the nature of these particles, any analytical measurements must be able to distinguish between the possible sources of these particles. A study was undertaken using a laser microprobe interfaced to a quadrupole mass spectrometer for the analysis of the volatile components present in cosmic dust particles, terrestrial contaminants present in the upper atmosphere, and primitive carbonaceous chondrites. From the study of the volatiles released from the carbonaceous materials it is hoped that one could distinguish between components and sources in the IDP particles analyzed. The technique is briefly described and results for the CI, CM, and CV chondrites and cosmic dust particle W7027B8 are presented.

Gibson, E. K., Jr.↗

Carbon, hydrogen and nitrogen in carbonaceous chondrites Abundances and isotopic compositions in bulk samples

Whole-rock samples of 25 carbonaceous chondrites were analyzed for contents of C, H and N and delta C-13, delta D and delta N-15. Inhomogeneous distribution of these isotopes within individual meteorites is pronounced in several cases. Few systematic intermeteorite trends were observed; N data are suggestive of isotopic inhomogeneity in the early solar system. Several chondrites revealed unusual compositions which would repay further, more detailed study. The data are also useful for classification of carbonaceous chondrites; N abundance and isotopic compositions can differentiate existing taxonomic groups with close to 100 percent reliability; Al Rais and Renazzo clearly constitute a discrete 'grouplet', and there are hints that both CI and CM groups may each be divisible into two subgroups.

Kerridge, J. F.↗

Chondrules in the Qingzhen type-3 enstatite chondrite Possible precursor components and comparison to ordinary chondrite chondrules

The mineral composition of chondrules from a fragment of Qingzhen (EH3) fall was analyzed by neutron activation method. Unlike the ordinary chondrite (OC) chondrules (Gooding and Keil, 1981), the Qingzhen radial pyroxene (RP) and porphyritic pyroxene (PP) chondrules have similar bulk compositions. Porphyritic olivine-pyroxene (POP) chondrules are richer than PP and RP chondrules in refractory lithophiles and siderophiles. Elements in each of the following sets intercorrelate significantly: (1) Fe-Co-Ni-Ir-Au, probably derived from a metal component; (2) Ca-Eu-Se, which suggests an oldhamite-rich precursor; (3) Al-Sc-Hf, occurring in high concentrations in POP chondrules, this set suggesting the existence of a refractory lithophile-rich and olivine-rich component; (4) Na REE; and (5) Cl-Br. Sets (2) and (4) were not precursors of OC. The interelement ratios of refractory lithophiles such as Ca, Al, Ti, Sc, and REE are similar to CI ratios, suggesting that they originated in the earliest phases as silicates, which were sulfurized before chondrule formation.

Grossman, J. N.↗

Elemental analysis of a comet nucleus by passive gamma ray spectrometry from a penetrator

The Comet Rendezvous Asteroid Flyby (CRAF) spacecraft, to be launched in 1991, was designed to study the physical and chemical properties of cometary and asteroid bodies. It is proposed that these properties can be determined by utilizing a penetrator experiment delivery system aboard the CRAF, which would deliver a passive gamma ray spectrometer to the comet and determine the composition of subsurface materials. Results of calculations for a model comet (50 percent CI carbonaceous chrondrite, 50 percent ices) provide data on the expected gamma ray fluxes, the minimum detectable limits, and the detection uncertainties for 35 isotopes. These results confirm that this technique can determine the composition of both the rocky and ice components, and the rock-to-ice ratio in the nucleus. In addition, useful information regarding the formation of the solar system is provided.

Evans, L. G.↗

Theoretical study of the X 2Pi and A 2Sigma(+) states of CuO and CuS

Theoretical spectroscopic constants and dipole moments are determined for the X 2Pi and A 2Sigma(+) states of CuO and CuS, using extended Gaussian basis sets and incorporating correlation using both configuration interaction (CI) and coupled pair (CPF) methods. Relativistic corrections (Darwin plus mass velocity), included using first-order perturbation theory, are found to be relatively small. At the CPF level, significant configuration mixing with the 3d(9)4s(1) occupation occurs for both states, resulting in some bond shortening and a significant increase in the dissociation energy. The best spectroscopic parameters are in excellent agreement with experiment for both CuO and CuS. In analogy with CuO, CuS is predicted to have a yet unobserved 2Sigma(+) state near 10,000 per cm.

Langhoff, S. R.↗

Calculated potential surfaces for the reactions: O + N2 yields NO + N and N + O2 yields NO + O

Complete Active Space SCF/Contracted CI (CASSCF/CCI) calculations, using large Gaussian basis sets, are presented for selected portions of the potential surfaces for the reactions in the Zeldovich mechanism for the conversion of N2 to NO. The N + O2 reaction is exoergic by 32 kcal/mole and is computed to have an early barrier of 10.2 kcal/mole for the (sup 2)A(sup prime) surface and 18.0 kcal/mole for the (sup 4)A(sup prime) surface. The O + N2 reaction is endoergic by 75 kcal/mole. The (sup 3)A(sup double prime) surface is calculated to have a late barrier of 0.5 kcal/mole, while the (sup 3)A(sup prime) surface is calculated to have a late barrier of 14.4 kcal/mole.

Walch, Stephen P.↗

The atomic carbon distribution in the coma of Comet Halley

The radial distribution of CO, OI, Ci, and CII emissions in the coma of comet Halley were measured by a long-slit far ultraviolet spectrograph aboard a sounding rocket on 26 Feb. and 13 Mar. 1986. While the CO profiles strongly suggest that CO is vaporized directly from the nucleus, the observed carbon distribution is not consistent with a radial outflow model of CO, suggesting an additional source of atomic carbon in the inner coma. Based on the in situ plasma measurements from the Vega and Giotto spacecraft, it is possible that this additional source of carbon could be the recombination of ionized CO in the inner coma.

Woods, T. N.↗

Potential surfaces for O atom-polymer reactions

Ab initio quantum chemistry methods are used to study the energetics of interactions of O atoms with organic compounds. Polyethylene (CH2)n has been chosen as the model system to study the interactions of O(3P) and O(1D) atoms with polymers. In particular, H abstraction is investigated and polyethylene is represented by a C3 (propane) oligomeric model. The gradient method, as implemented in the GRADSCF package of programs, is used to determine the geometries and energies of products and reactants. The saddle point, barrier geometry is determined by minimizing the squares of the gradients of the potential with respect to the internal coordinates. To correctly describe the change in bonding during the reaction at least a two configuration MCSCF (multiconfiguration self consistent field) or GVB (generalized valence bond) wave function has to be used. Basis sets include standard Pople and Dunning sets, however, increased with polarization functions and diffuse p functions on both the C and O atoms. The latter is important due to the O(-) character of the wave function at the saddle point and products. Normal modes and vibrational energy levels are given for the reactants, saddle points and products. Finally, quantitative energetics are obtained by implementing a small CAS (complete active space) approach followed by limited configuration interaction (CI) calculations. Comparisons are made with available experimental data.

Laskowski, B. C.↗