Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CERIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Unexpected Hydride: Ce 4 B 2 C 2 H 2.42 , a Stuffed Variant of the Nd 2 BC Structure Type

Ce 4 B 2 C 2 H 2.42 was grown as large crystals from a cerium/copper eutectic flux. The structure was characterized by single-crystal X-ray and neutron diffraction and was found to be a stuffed variant of Nd 2 BC with the addition of two interstitial hydrogen positions. The tetrahedral hydrogen position is fully occupied, while the octahedral position has an occupancy of 42(3)%. Initial synthesis was due to hydrogen contamination of the cerium metal but has been successfully repeated using anthracene as a carbon and hydrogen source. Density of states calculations suggest that the incorporation of hydrogen stabilizes the compound with respect to the nonhydrided model. Magnetic susceptibility data show a complex magnetic ordering at 7.7 K that originates from the localized electron on the Ce 3+ in the structure. The trivalent state is also supported by X-ray photoelectron spectroscopy measurements. Heat capacity and electrical resistivity data show that the phase transition is broad in temperature, which may be due to structural disorder. Furthermore, the large low temperature value of C/T also indicates possible heavy fermion behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-Performance Catalytic Four-Channel Hollow Fibers with Highly Dispersed Nickel Nanoparticles Prepared by Atomic Layer Deposition for Dry Reforming of Methane

In this study, highly dispersed nickel (Ni) nanoparticles (NPs) with an average particle size of 4.3 nm were uniformly deposited on the outer surface, the inner channel surface, and inside the pores of 20-cm long 4-channel α-Al 2 O 3 hollow fibers (HFs) by atomic layer deposition (ALD) for dry reforming of methane (DRM). Cerium oxide (CeO 2 ) was added to promote the catalytic performance of Ni/Al 2 O 3 -HF catalysts. Rationally designed filling methods, by tuning the reactor size and inert fillings, can reduce the catalyst bed voidage in a fixed bed reactor for better reactant gas distribution, effectively utilize the Ni reactive sites, and achieve excellent catalytic performance. It was found that the CeO 2 -promoted Ni/Al 2 O 3 -HF catalyst was highly active and highly stable without deactivation during an overall 400-hr DRM test at 850 ºC. CeO 2 with reversible valence states could participate in surface reactions; especially, the formation of CeAlO 3 provided sufficient surface Ce 3+ for CO 2 activation and enhanced the stability and reusability of the HF catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metal–Oxo Cluster Formation Using Ammonium and Sulfate to Differentiate M IV (Th, U, Ce) Chemistries

Isolating isostructural compounds of tetravalent metals M IV (Zr, Hf, Ce, Th, U, Pu, Np) improves our understanding of metal hydrolysis and coordination behavior across the periodic table. These metals form polynuclear clusters typified by the hexamer [M IV 6 O 4 (OH) 4 ] 12+ . Exploiting the ammonium M IV -sulfate (Ce IV , Th IV , and U IV ) phase space targeting rapid crystallization, we isolate the common hexamer [M IV 6 (OH) 4 (O) 4 ] 12+ but with different numbers of capping sulfates and water molecules for Ce IV , Th IV , and U IV . Furthermore, these phases allowed a direct comparison of bonding trends across the series. Upon cocrystallization with the hexamers, higher complex structures can be identified. Thorium features assemblies with monomer-linked hexamer chains. Uranium features assemblies with sulfate-bridged hexamers and the supramolecular assembly of 14 hexamers into the U 84 , [U 6 (OH) 4 (O) 4 ) 14 (SO 4 ) 120 (H 2 O) 42 ] 72– . Last, cerium showcases the isolation from monomers to the Ce 62 , [Ce 62 (OH) 30 (O) 58 (SO 4 ) 71 (H 2 O) 33.25 ] 41– . Furthermore, small-angle X-ray scattering (room temperature) shows ammonium-induced cluster assembly for Ce IV but minimal reactivity for U IV and Th IV . In this study, because the phases crystallized at elevated temperature demonstrates favorable cluster assembly, these solution phase results were surprising and suggest some other characteristics such as Ce’s facile redox behavior, contributes to its solution-phase speciation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Search for Stable and Low-Energy Ce–Co–Cu Ternary Compounds Using Machine Learning

Cerium-based intermetallics have garnered significant research attention as potential new permanent magnets. In this study, we explore the compositional and structural landscape of Ce−Co−Cu ternary compounds using a machine learning (ML)- guided framework integrated with first-principles calculations. We employ a crystal graph convolutional neural network (CGCNN), which enables efficient screening for promising candidates, significantly accelerating the material discovery process. With this approach, we predict five stable compounds, Ce 3 Co 3 Cu, CeCoCu 2 , Ce 12 Co 7 Cu, Ce 11 Co 9 Cu, and Ce 10 Co 11 Cu 4 , with formation energies below the convex hull, along with hundreds of low-energy (possibly metastable) Ce−Co−Cu ternary compounds. Firstprinciples calculations reveal that several structures are both energetically and dynamically stable. Notably, two Co-rich low-energy compounds, Ce 4 Co 33 Cu and Ce 4 Co 31 Cu 3 , are predicted to have high magnetizations.

Chemical structure↗
DOE OSTI2025

Structural Investigation of Six Quinary Sulfides Synthesized via the Flux-Assisted Boron-Chalcogen Mixture (BCM) Method: Eu 2+ Containing Members of the RE 3 MTQ 7 (M and T = Transition or Main Group Metals, Q = Chalcogens) Family

For this work, a series of six quinary rare-earth sulfides Ce 4+ 1.85 Eu 2+ 1.15 Na 0.30 SiS 7 , Ce 4+ 1.91 Eu 2+ 1.09 K 0.18 SiS 7 , Ce 4+ 1.96 Eu 2+ 1.04 Rb 0.08 SiS 7 , Ce 4+ 1.98 Eu 2+ 1.02 Cs 0.05 SiS 7 , Ce 4+ 1.97 Eu 2+ 1.03 Ag 0.06 SiS 7 , and Ce 4+ 1.50 Eu 2+ 1.50 CuSiS 7 were obtained in an alkali iodide flux using the boron-chalcogen mixture (BCM) method. Single crystal X-ray diffraction was used to determine the structures of the high quality single crystals that were grown; their elemental compositions were confirmed by energy-dispersive spectroscopy (EDS). The compounds crystallize in the hexagonal crystal system in the noncentrosymmetric space group P63. The crystal structure consists of a three-dimensional network composed of mixed cerium and europium bicapped trigonal prisms, isolated SiS4 tetrahedra, and monovalent metals (Na, K, Rb, Cs, Ag, and Cu) located in cavities created by linked Ce/EuS 8 polyhedra. The structures are charge-balanced when Ce and Eu are in their +4 and +2 oxidation states, respectively. The effective magnetic moment of Ce 1.50 4+ Eu 1.50 2+ CuSiS 7 determined from the temperature dependence of the magnetic susceptibility data is consistent with the presence of Ce 4+ and Eu 2+ . Clear correlations between the alkali ion site occupancy, the ionic radius of the alkali cations, and the average bond length of Ce 4+ /Eu 2+ –S, were established. UV–vis diffuse reflectance data were collected for Ce 1.50 4+ Eu 1.50 2+ CuSiS 7 and a band gap of 1.9(1) eV was established.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electronic Structure Tuning of Lanthanidocene Photocatalysts for C–F Bond Cleavage

A set of nine new robust, tunable cerium complexes supported by an ansa-bis(cyclopentadienyl) ligand, [Me 2 Si(η 5 -Cp R ) 2 ]CeX ( an Cp R )CeX, are excellent homogeneous visible-light photocatalysts for the monodefluoroalkylation of trifluorotoluene with Mg(CH 2 C 6 H 5 ) 2 THF 2 (R = Me 4 , SiMe 3 , X = N(SiMe 3 ) 2 (N″), X = CH(SiMe 3 ) 2 (R''), Cl, OC 6 H 2 t Bu 2 -2,6,Me-4 (OAr)). The trends in photocatalytic activity within the series are explained by photophysical spectroscopic analyses. The aryloxide complex [Me 2 Si(Cp SiMe3 ) 2 ]CeOAr, which has the highest activity (95% substrate conversion in 27 h), shows the most negative (most reducing) excited-state reduction potential (-2.71 V vs Fc). The precatalyst excited-state lifetimes are also exceptionally long. Detailed photoluminescence, NMR spectroscopic, and kinetic studies on chloride [Me 2 Si(Cp Me4 ) 2 ]CeCl suggest that the "ate" complex [{Me 2 Si(Cp Me4 ) 2 } 2 Ce III ClBn][MgBn] is the active catalyst in the alkylation reaction to form PhCF 2 CH 2 Ph with high selectivity over PhCF 2 H. Finally, the reaction rates are up to 30 times higher than previously reported for organometallic rare-earth photocatalysts for these Ce complexes and comparable to established Ir-based photoredox systems.

catalysts↗
DOE OSTI2022

Advancing Chemical Separations: Unraveling the Structure and Dynamics of Phase Splitting in Liquid–Liquid Extraction

Liquid-liquid extraction (LLE), the go-to process for a variety of chemical separations, is limited by spontaneous organic phase splitting upon sufficient solute loading, called third phase formation. In this study we explore the applicability of critical phenomena theory to gain insight into this deleterious phase behavior with the goal of improving separations efficiency and minimizing waste. Here, a series of samples representative of rare earth purification were constructed to include each of one light and one heavy lanthanide (cerium and lutetium) paired with one of two common malonamide extractants (DMDOHEMA and DMDBTDMA). The resulting postextraction organic phases are chemically complex and often form rich hierarchical structures whose statics and dynamics near the critical point were probed herein with small-angle X-ray scattering and high-speed X-ray photon correlation spectroscopy. Despite their different extraction behaviors, all samples show remarkably similar critical behavior with exponents well described by classical critical point theory consistent with the 3D Ising model, where the critical behavior is characterized by fluctuations with a single diverging length scale. This unexpected result indicates a significant reduction in relevant chemical parameters at the critical point, indicating that the underlying behavior of phase transitions in LLE rely on far fewer variables than are generally assumed. The obtained scalar order parameter is attributed to the extractant fraction of the extractant/diluent mixture, revealing that other solution components and their respective concentrations simply shift the critical temperature but do not affect the nature of the critical fluctuations. These findings point to an opportunity to drastically simplify studies of liquid-liquid phase separation and phase diagram development in general while providing insights into LLE process improvement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nano-Ceramic Cathodes via Co-sputtering of Gd–Ce Alloy and Lanthanum Strontium Cobaltite for Low-Temperature Thin-Film Solid Oxide Fuel Cells

We report the electrochemical performance and structural characteristics of porous nanostructured ceramic cathodes for thin-film solid oxide fuel cells (TF-SOFCs) based on yttria-stabilized zirconia (YSZ) electrolytes. The nanostructured cathode is obtained through magnetron co-sputtering of gadolinium–cerium (Gd–Ce) alloy and lanthanum strontium cobaltite perovskite targets. The resultant nanostructure and composition of the ceramic cathode are controlled by adjusting the co-sputtering conditions. The peak power densities in our fabricated TF-SOFCs are the highest reported values for YSZ-based electrolyte SOFCs, showing 0.14, 0.48, 1.21, 2.56, and 3.01 W/cm2 at 450, 500, 550, 600, and 650 °C, respectively, operating under air and pure hydrogen fuel. The results show that the porosity and composition of the cathode greatly affect the resulting peak power densities. This work illustrates the capability of sputtering to produce stable, scalable, nano-ceramic cathodes with superb peak power densities when integrated in TF-SOFCs.

25 ENERGY STORAGE↗
DOE OSTI2025

Supported-Single Nickel Atom Catalysts for the Methanation of Carbon Dioxide

Synthesis of twenty-seven bimetallic catalysts consisting of nickel and one of nine different dopants (B, Co, Cu, Fe, Mg, Mn, Sn, V, and Zn) supported on three different metal oxides (Al 2 O 3 , CeO 2 , and SiO 2 ) is carried out via organometallic grafting. The catalysts are evaluated for their activity and selectivity for the CO 2 methanation reaction at a feed ratio of H 2 /CO 2 of 4 at 300 °C in a high-throughput flow reactor system. After in situ pre-activation (500 °C in H 2 ), Ni/Co/CeO 2 exhibited high conversion (84.3%) and selectivity for methane (99.6%). Ni/Co/CeO 2 was characterized by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction, H 2 -temperature-programmed reduction (H 2 -TPR), and CO 2 -temperature-programmed desorption (CO 2 -TPD). HRTEM showed the presence of single Ni and Co atoms on ceria after pre-reduction at 500 °C and after the methanation reaction at 300 °C for 15 h. XPS determined that the strong interaction between Ni, Co, and ceria increased after the reduction, leading to a charge transfer between Ni and Ce that created oxygen vacancies in ceria. Nickel was found to be Ni 2+ in the as-prepared material and was partially reduced in the presence of cobalt and after the activation in H 2 at 500 °C. The DFT results show that both nickel and cerium exhibit lower Bader charges in the Ni/Co/CeO 2 system, confirming that the presence of cobalt enhances the reduction of both Ni and Ce through electronic interactions. This indicates that single cationic Ni atoms are highly effective for the methanation reaction. In conclusion, the organometallic grafting technique is found to be efficient for synthesizing catalysts with highly homogeneous dispersed species at low metal loadings (0.16 wt % Ni–0.15 wt % Co), which leads to high turnover frequency (up to 248.7 h –1 ) and durability for methanation.

CO2 conversion↗
DOE OSTI2024

CeO2 Nanoparticle Doping as a Probe of Active Site Speciation in the Catalytic Hydrolysis of Organophosphates

Organophosphate hydrolysis is important for degrading environmentally harmful compounds and recovering phosphate ions in biological molecules. CeO2 nanocrystals have been well-studied for dephosphorylation via hydrolysis owing to the accessible and tunable distribution of Ce3+ and Ce4+ ions. However, there remains uncertainty in the literature regarding which surface defect properties direct catalytic activity, such as the Ce3+/Ce4+ distribution, oxygen vacancies, faceting, and dopants, and to what degree they contribute to efficient hydrolysis. Trivalent (M3+) dopants serve as a tool for manipulating defects, including the concentration of Ce3+ and oxygen vacancies, thereby influencing the hydrolytic activity of CeO2. Herein, trivalent metal ions (M = Y3+, Cr3+, In3+, and Gd3+) were employed to modulate the active sites on the CeO2 nanocrystal surface, and the effects of each metal dopant on the cerium oxide active sites for organophosphate hydrolysis were investigated. M-doped CeO2 nanoparticles were synthesized via hydrothermal methods, followed by annealing to remove ligands and prime the nanocrystal surface for catalysis. Catalytic performance was evaluated using dimethyl-p¬-nitrophenyl phosphate (DMNP) as a model organophosphate substrate, with degradation monitored over time using UV-visible absorption spectroscopy. Powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy revealed successful doping of CeO2 in all cases, albeit with distinctive characteristics demonstrating how M3+ dopants affect catalysis. We show that CeO2 exhibits high sensitivity to dopants that generate lattice strain, Ce3+ ions, and oxygen vacancy defects. Consequently, achieving high catalytic efficiency within CeO2 requires a balanced active site ensemble, wherein defects are maintained at optimal concentrations and distributions on the nanocrystal surface.

Miura-Stempel, Emily L.↗
DOE OSTI2020

Discriminating the Role of Surface Hydride and Hydroxyl for Acetylene Semihydrogenation over Ceria through In Situ Neutron and Infrared Spectroscopy

Ceria has been used as a hydrogenation catalyst especially in selective alkyne hydrogenation, but the reaction mechanism regarding the role of different surface hydrogen species remains unclear. Here, we utilized in situ neutron and infrared vibration spectroscopy to show the catalytic role of cerium hydride (Ce–H) and hydroxyl (OH) groups in acetylene hydrogenation over ceria surfaces with different degree of reduction. In situ inelastic neutron scattering spectroscopy (INS) proved that not only Ce–H but also surface atomic hydrogen species on the reduced ceria surface can participate in acetylene semihydrogenation. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results implied that bridging OH groups both on the oxidized and reduced ceria are active in the selective hydrogenation of acetylene. It appears that surface Ce–H is more reactive than the coexisting OH species on the reduced ceria surface, but over-reduction of ceria also results in strongly bound species that may lead to catalyst deactivation. These spectroscopic results clearly explain the reaction mechanism including not only the surface chemistry but also the nature of the active hydrogen species for selective hydrogenation over ceria, providing insights into the design of more active and stable ceria-based catalysts for hydrogenation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ceria Incorporation in Sinter-Resistant Platinum-Based Catalysts

Platinum group metals (PGM) are widely used for exhaust emission abatement. Sintering during the high-temperature emission control conditions decreases noble metal utilization efficiency. Efficient use of scarce noble metals requires sinter-resistant catalysts. Here we extend an approach to synthesize catalysts consisting of platinum nanoparticles encapsulated in a mixture of cerium and aluminum oxides (Pt@Al 2 O 3 -CeO 2 ). We tested the activity of this catalyst toward carbon monoxide, propene, and propane oxidation chosen as model oxidation reactions for emission control catalysts. Pt@Al 2 O 3 -CeO 2 catalysts demonstrated similar activity and stability upon aging as the comparison system without ceria, Pt@Al 2 O 3 , while maintaining small Pt nanoparticles and ceria crystallites. Additionally, we studied the influence of various thermal treatments on CO oxidation activity and determined that a steam treatment can activate low temperature CO oxidation activity of Pt@Al 2 O 3 -CeO 2 . STEM-EDS analysis revealed that thermal treatments led to the co-location of Pt and CeO 2 and temperature programmed-reduction analysis revealed that the steam treatment specifically enhanced CO oxidation activity through surface reduction of the CeO 2 . As a result, we demonstrate the versatility of this encapsulation approach to generate mixed metal-oxide supports with improved metal-support interactions without hindering nanoparticle stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Tuning the Coordination Environment of Rh Single Atoms on Highly Dispersed Reducible Oxides for Enhanced Reverse Water-Gas Shift Performance

Controlling the dynamic mobility of catalyst surface active sites and their interactions with the surrounding environment is critical in generating active surfaces that directly influence the catalytic activity and selectivity. Here, we report a strategy for tailoring the dispersion and electronic environment of single atom Rh catalysts by decorating the alumina support with highly dispersed (HD) cerium and molybdenum oxides. The resulting catalysts exhibit markedly different behavior in the Reverse Water Gas Shift (RWGS) reaction. In particular, Rh/MoOx(HD)/Al2O3 maintains atomically dispersed Rh even at elevated temperatures (up to 400 °C), achieving CO selectivity of up to 100% and resists sintering via the formation of a newly developed structure featuring Rh single atoms embedded in MoOx clusters. In situ spectroscopy and microscopy analyses confirm the stabilization of Rh and the dynamic evolution of Rh–Mo coordination under reaction conditions. Our findings highlight the power of support modification in steering active site structure and activity, offering a pathway toward enhanced and tunable single atom catalysts for CO2 valorization.

CO selectivity↗
DOE OSTI2024

Coherent Erbium Spin Defects in Colloidal Nanocrystal Hosts

We demonstrate nearly a microsecond of spin coherence in Er 3+ ions doped in cerium dioxide nanocrystal hosts, despite a large gyromagnetic ratio and nanometric proximity of the spin defect to the nanocrystal surface. The long spin coherence is enabled by reducing the dopant density below the instantaneous diffusion limit in a nuclear spin-free host material, reaching the limit of a single erbium spin defect per nanocrystal. We observe a large Orbach energy in a highly symmetric cubic site, further protecting the coherence in a qubit that would otherwise rapidly decohere. Spatially correlated electron spectroscopy measurements reveal the presence of Ce 3+ at the nanocrystal surface, which likely acts as extraneous paramagnetic spin noise. Even with these factors, defect-embedded nanocrystal hosts show tremendous promise for quantum sensing and quantum communication applications, with multiple avenues, including core-shell fabrication, redox tuning of oxygen vacancies, and organic surfactant modification, available to further enhance their spin coherence and functionality in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

A Ce 4+ Aluminum Hydride Complex

Complexes of reducing hydride ligands by high-oxidation state cerium are unknown due to the fundamental mismatch in their redox chemistry. Herein we report the synthesis, characterization, and reactivity of the first example of a Ce 4+ aluminum hydride complex. Synthetic strategies adapted from the preparation of Ce 4+ alkyl complexes facilitated the isolation of [Ce 4+ (κ 2 -H 3 AlC(TMS) 3 )(NP( t Bu) 3 ) 3 ] (CeHAl). The bonding and structure of this complex is characterized by single-crystal XRD, NMR, and UV–vis–NIR spectroscopy, and DFT computations. The fundamental reactivity profile is evaluated by cyclic voltammetry and small-molecule reactions.

anions↗
DOE OSTI2025

Surface Hydration of Porous Nickel Hydroxides Facilitates the Reversible Adsorption of CO 2 from Ambient Air

Direct air capture (DAC) under humid ambient conditions typically requires the use of organic components, with sorbents that are purely inorganic in composition for the most part operating hundreds of degrees above room temperature. In this work, we report porous metal hydroxides as a novel class of water-tolerant, oxidatively and hydrothermally stable low-temperature sorbents that exhibit competitive DAC working capacities of 1.25 mmol/g over 5 consecutive temperature swing adsorption–desorption cycles in the presence of steam and oxygen. Aqueous miscible organic solvent treatments are used to create highly porous structures with surface areas exceeding 700 m 2 /g that capture CO 2 in the form of bicarbonates under dry conditions, and carbonates under wet conditions. Water exerts a facilitative rather than an inhibiting effect on CO 2 binding, and the presence of hydrating multilayers serves to stabilize carbonate species akin to moisture swing adsorbents except for the fact that solvation results in a remarkable (upto 10-fold) increase, not decrease, in DAC capacity. High-valent doping with cerium is used to improve DAC capacities by amplifying surface basicity, evidencing porous nickel hydroxides specifically (and porous metal hydroxides more generally) as a novel class of robust, earth-abundant DAC sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metallic surface doping of metal halide perovskites

Abstract Intentional doping is the core of semiconductor technologies to tune electrical and optical properties of semiconductors for electronic devices, however, it has shown to be a grand challenge for halide perovskites. Here, we show that some metal ions, such as silver, strontium, cerium ions, which exist in the precursors of halide perovskites as impurities, can n-dope the surface of perovskites from being intrinsic to metallic. The low solubility of these ions in halide perovskite crystals excludes the metal impurities to perovskite surfaces, leaving the interior of perovskite crystals intrinsic. Computation shows these metal ions introduce many electronic states close to the conduction band minimum of perovskites and induce n-doping, which is in striking contrast to passivating ions such as potassium and rubidium ion. The discovery of metallic surface doping of perovskites enables new device and material designs that combine the intrinsic interior and heavily doped surface of perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗