Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bad data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Analysis of the tropospheric water distribution during FIRE 2

The Penn State/NCAR mesoscale model, as adapted for use at ARC, was used as a testbed for the development and validation of cloud models for use in General Circulation Models (GCM's). This modeling approach also allows us to intercompare the predictions of the various cloud schemes within the same dynamical framework. The use of the PSU/NCAR mesoscale model also allows us to compare our results with FIRE-II (First International Satellite Cloud Climatology Project Regional Experiment) observations, instead of climate statistics. Though a promising approach, our work to date revealed several difficulties. First, the model by design is limited in spatial coverage and is only run for 12 to 48 hours at a time. Hence the quality of the simulation will depend heavily on the initial conditions. The poor quality of upper-tropospheric measurements of water vapor is well known and the situation is particularly bad for mid-latitude winter since the coupling with the surface is less direct than in summer so that relying on the model to spin-up a reasonable moisture field is not always successful. Though one of the most common atmospheric constituents, water vapor is relatively difficult to measure accurately, especially operationally over large areas. The standard NWS sondes have little sensitivity at the low temperatures where cirrus form and the data from the GOES 6.7 micron channel is difficult to quantify. For this reason, the goals of FIRE Cirrus II included characterizing the three-dimensional distribution of water vapor and clouds. In studying the data from FIRE Cirrus II, it was found that no single special observation technique provides accurate regional distributions of water vapor. The Raman lidar provides accurate measurements, but only at the Hub, for levels up to 10 km, and during nighttime hours. The CLASS sondes are more sensitive to moisture at low temperatures than are the NWS sondes, but the four stations only cover an area of two hundred kilometers on a side. The aircraft give the most accurate measurements of water vapor, but are limited in spatial and temporal coverage. This problem is partly alleviated by the use of the MAPS analyses, a four-dimensional data assimilation system that combines the previous 3-hour forecast with the available observations, but its upper-level moisture analyses are sometimes deficient because of the vapor measurement problem. An attempt was made to create a consistent four-dimensional description of the water vapor distribution during the second IFO by subjectively combining data from a variety of sources, including MAPS analyses, CLASS sondes, SPECTRE sondes, NWS sondes, GOES satellite analyses, radars, lidars, and microwave radiometers.

Westphal, Douglas L.↗

Assessing Interpersonal and Communication Skills in Radiation Oncology Residents: A Pilot Standardized Patient Program

Purpose: There is a lack of data for the structured development and evaluation of communication skills in radiation oncology residency training programs. Effective communication skills are increasingly emphasized by the Accreditation Council for Graduate Medical Education and are critical for a successful clinical practice. We present the design of a novel, pilot standardized patient (SP) program and the evaluation of communication skills among radiation oncology residents. Methods and Materials: Two case scenarios were developed to challenge residents in the delivery of “bad news” to patients: one scenario regarding treatment failure and the other regarding change in treatment plan. Eleven radiation oncology residents paired with 6 faculty participated in this pilot program. Each encounter was scored by the SPs, observing faculty, and residents themselves based on the Kalamazoo guidelines. Results: Overall resident performance ratings were “good” to “excellent,” with faculty assigning statistically significant higher scores and residents assigning lower scores. We found inconsistent inter rater agreement among faculty, residents, and SPs. SP feedback was also valuable in identifying areas of improvement, including more collaborative decision making and less use of medical jargon. Conclusions: The program was well received by residents and faculty and regarded as a valuable educational experience that could be used as an annual feedback tool. Poor inter rater agreement suggests a need for residents and faculty physicians to better calibrate their evaluations to true patient perceptions. High scores from faculty members substantiate the concern that resident evaluations are generally positive and nondiscriminating. Faculty should be encouraged to provide honest and critical feedback to hone residents' interpersonal skills.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Test Analysis Guidelines

Development of analysis guidelines for Exploration Life Support (ELS) technology tests was completed. The guidelines were developed based on analysis experiences gained from supporting Environmental Control and Life Support System (ECLSS) technology development in air revitalization systems and water recovery systems. Analyses are vital during all three phases of the ELS technology test: pre-test, during test and post test. Pre-test analyses of a test system help define hardware components, predict system and component performances, required test duration, sampling frequencies of operation parameters, etc. Analyses conducted during tests could verify the consistency of all the measurements and the performance of the test system. Post test analyses are an essential part of the test task. Results of post test analyses are an important factor in judging whether the technology development is a successful one. In addition, development of a rigorous model for a test system is an important objective of any new technology development. Test data analyses, especially post test data analyses, serve to verify the model. Test analyses have supported development of many ECLSS technologies. Some test analysis tasks in ECLSS technology development are listed in the Appendix. To have effective analysis support for ECLSS technology tests, analysis guidelines would be a useful tool. These test guidelines were developed based on experiences gained through previous analysis support of various ECLSS technology tests. A comment on analysis from an experienced NASA ECLSS manager (1) follows: "Bad analysis was one that bent the test to prove that the analysis was right to begin with. Good analysis was one that directed where the testing should go and also bridged the gap between the reality of the test facility and what was expected on orbit."

Jeng, Frank F.↗

Radio-Adaptive Responses of Mouse Myocardiocytes

One of the most significant occupational hazards to an astronaut is the frequent exposure to radiation. Commonly associated with increased risk for cancer related morbidity and mortality, radiation is also known to increase the risk for cardiovascular related disorders including: pericarditis, hypertension, and heart failure. It is believed that these radiation-induced disorders are a result of abnormal tissue remodeling. It is unknown whether radiation exposure promotes remodeling through fibrotic changes alone or in combination with programmed cell death. Furthermore, it is not known whether it is possible to mitigate the hazardous effects of radiation exposure. As such, we assessed the expression and mechanisms of radiation-induced tissue remodeling and potential radio-adaptive responses of p53-mediated apoptosis and fibrosis pathways along with markers for oxidative stress and inflammation in mice myocardium. 7 week old, male, C57Bl/6 mice were exposed to 6Gy (H) or 5cGy followed 24hr later with 6Gy (LH) Cs-137 gamma radiation. Mice were sacrificed and their hearts extirpated 4, 24, or 72hr after final irradiation. Real Time - Polymerase Chain Reaction was used to evaluate target genes. Pro-apoptotic genes Bad and Bax, pro-cell survival genes Bcl2 and Bcl2l2, fibrosis gene Vegfa, and oxidative stress genes Sod2 and GPx4 showed a reduced fold regulation change (Bad,-6.18; Bax,-6.94; Bcl2,-5.09; Bcl2l2,-4.03; Vegfa, -11.84; Sod2,-5.97; GPx4*,-28.72; * = Bonferroni adjusted p-value . 0.003) 4hr after H, but not after 4hr LH when compared to control. Other p53-mediated apoptosis genes Casp3, Casp9, Trp53, and Myc exhibited down-regulation but did not achieve a notable level of significance 4hr after H. 24hr after H, genetic down-regulation was no longer present compared to 24hr control. These data suggest a general reduction in genetic expression 4hrs after a high dose of gamma radiation. However, pre-exposure to 5cGy gamma radiation appears to facilitate a radio-adaptive response that mitigates the reduction in genetic expression associated with single high-dose gamma radiation exposure. This radio-adaptive response may serve as a potential countermeasure to radiation-induced myocardial remodeling and preserve the cardiovascular health of astronauts; thus, reducing the risks of human space exploration.

Seawright, John W.↗

Induction of a Radio-Adaptive Response by Low-dose Gamma Irradiation in Mouse Cardiomyocytes

One of the most significant occupational hazards to an astronaut is the frequent exposure to radiation. Commonly associated with increased risk for cancer related morbidity and mortality, radiation is also known to increase the risk for cardiovascular related disorders including: pericarditis, hypertension, and heart failure. It is believed that these radiation-induced disorders are a result of abnormal tissue remodeling. It is unknown whether radiation exposure promotes remodeling through fibrotic changes alone or in combination with programmed cell death. Furthermore, it is not known whether it is possible to mitigate the hazardous effects of radiation exposure. As such, we assessed the expression and mechanisms of radiation-induced tissue remodeling and potential radio-adaptive responses of p53-mediated apoptosis and fibrosis pathways along with markers for oxidative stress and inflammation in mice myocardium. 7 week old, male, C57Bl/6 mice were exposed to 6Gy (H) or 5cGy followed 24hr later with 6Gy (LH) 137Cs gamma radiation. Mice were sacrificed and their hearts extirpated 4, 24, or 72hr after final irradiation. Real Time - Polymerase Chain Reaction was used to evaluate target genes. Apoptotic genes Bad and Bax, pro-cell survival genes Bcl2 and Bcl2l2, fibrosis gene Vegfa, and oxidative stress genes Sod2 and GPx4 showed a reduced fold regulation change (Bad,-6.18; Bax,-6.94; Bcl2,-5.09; Bcl2l2,-4.03; Vegfa, -11.84; Sod2,-5.97; GPx4*,-28.72; * = Bonferroni adjusted p-value < or = 0.003) 4hr after H, but not after 4hr LH compared to control. Other p53-mediated apoptosis genes Casp3, Casp9, Trp53, and Myc exhibited down-regulation but did not achieve a notable level of significance 4hr after H. 24hr after H, genetic down-regulation was no longer present compared to 24hr control. These data suggest a general reduction in genetic expression 4hrs after a high dose of gamma radiation. However, pre-exposure to 5cGy gamma radiation appears to facilitate a radio-adaptive response that mitigates the reduction in genetic expression associated with single high-dose gamma radiation exposure. This radio-adaptive response may serve as a potential countermeasure to radiation-induced myocardial remodeling and preserve the cardiovascular health of astronauts; thus, reducing the risks of human space exploration.

Westby, Christian M.↗

Comparison of theoretical and experimental boundary-layer development in a Mach 2.5 mixed-compression inlet

An analytical investigation was made of the boundary layer flow in an axisymmetric Mach 2.5 mixed compression inlet, and the results were compared with experimental measurements. The inlet tests were conducted in the Lewis 10- by 10-foot supersonic wind tunnel at a unit Reynolds number of 8.2 million/m. The inlet incorporated porous bleed regions for boundary layer control, and the effect of this bleed was taken into account in the analysis. The experimental boundary layer data were analyzed by using similarity laws from which the skin friction coefficient was obtained. The boundary layer analysis included predictions of laminar and turbulent boundary layer growth, transition, and the effects of the shock boundary layer interactions. In addition, the surface static pressures were compared with those obtained from an inviscid characteristics program. The results of investigation showed that the analytical techniques gave satisfactory predictions of the boundary layer flow except in regions that were badly distorted by the terminal shock.

Hingst, W. R.↗

CASSIS: THE CORNELL ATLAS OF SPITZER/INFRARED SPECTROGRAPH SOURCES

We present the spectral atlas of sources observed in low resolution with the Infrared Spectrograph on board the Spitzer Space Telescope. More than 11,000 distinct sources were extracted using a dedicated algorithm based on the SMART software with an optimal extraction (AdOpt package). These correspond to all 13,000 low-resolution observations of fixed objects (both single source and cluster observations). The pipeline includes image cleaning, individual exposure combination, and background subtraction. Particular attention is given to bad pixel and outlier rejection at the image and spectra levels. Most sources are spatially unresolved so that optimal extraction reaches the highest possible signal-to-noise ratio. For all sources, an alternative extraction is also provided that accounts for all of the source flux within the aperture. CASSIS provides publishable quality spectra through an online database together with several important diagnostics, such as the source spatial extent and a quantitative measure of detection level. Ancillary data such as available spectroscopic redshifts are also provided. The database interface will eventually provide various ways to interact with the spectra, such as on-the-fly measurements of spectral features or comparisons among spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Advanced sorbents for modular oxygen production for REMS gasifiers

Under a DOE funded effort, Thermosolv LLC has been developing a sorbent-based oxygen production technology for gasification and oxy-combustion applications. The sorbents utilize oxygen-storage properties of certain perovskites to (1) selectively adsorb oxygen at moderate temperature from compressed air and (2) release the adsorbed oxygen into a vacuum or a sweep gas such as CO2 and/or steam. Through cyclic operations of multiple sorbent beds such a process can be made continuous. Pressure drop across the sorbent bed and other similar design considerations dictate that the sorbent be in the form of a high surface-area-to-volume pellet and yet still possess sufficient crush strength and integrity. Process efficiency is determined by the sorption and desorption kinetics and sorbent capacity. Typical process involves cycle times in the order of 100 seconds, a time too short to fully utilize the full volume of the sorbent and the sorption capacity of the sorbent pellets. As a part of this project, Thermosolv LLC undertook the development of oxygen sorbents as a high-surface area supported sorbent on a light-weight inert support to (1) reduce the cost, (2) increase the productivity, and (3) reduce the overall weight of the reactor. Using a previously developed perovskite (LSCF 1991) with its well-characterized performance, composite sorbent pellets each consisting of an inert core coated by a thin layer of the functional perovskite material were produced. Several low-density, inexpensive inert solids supports in the 1/8”-1/4” size were selected to keep the pressure drop across the sorbent bed in the acceptable range. A number of commercial technologies including spray coating, dip coating, incipient impregnation of porous substrate followed by thermal annealing at various temperatures and duration were employed and tested to produce robust composite supported sorbent pellets. A sense of optimum coating thickness was developed by testing sorbent pellets of various increasing diameter pellets. LSCF-1991extrudates ranging in size from 1/32” to 3/16” were tested in a TGA and in a fixed-bed pressure swing test set-up for sorption/desorption cycles of interest. The data show that for the operational conditions of interest the coating thickness for a supported sorbent pellet needs to be approximately 1/32” (about 0.8 mm). Subsequent work thereby concentrated on developing composite pellets of various substrates, shapes and sizes with coating layer of about this size range. Candidate support materials were chosen based on cost, inertness, mechanical strength, thermal expansion and chemical stability with sorbent material, and in a size range to give an acceptable pressure drop in fixed-bad reactor configurations. Coating application methods used for application of the sorbent onto the support included precipitation, spray coating and dip coating from sorbent slurries and sol gels. For all coated supports where we could successfully apply a uniform coating of desired thickness with an acceptable handling performance in terms of exfoliation, TGA-based cyclic sorption/desorption testing was performed to determine cycling capacity of oxygen. Among nearly twenty different support materials tested, best adhesion performance was obtained from stainless saddle supports. In the bench-scale fixed-bad tests stainless steel saddle support composite pellets with a coating thickness in the 0.6 mm or so range, the composite sorbent pellet performance approached up to 95% of that of the 2 mm parent material pellets. In a parallel approach to reducing the cost of the sorbent, alternate sorbent formulations replacing/reducing the amount of cobalt in the LSCF family were also investigated. Successful formulations that could match the performance of LSCF 1991 were identified based on TGA cyclic tests as LSCF 1919 and LSF 1910. In the range of operational envelop of cycle times and other relevant process operating conditions, the reduced Co formulations showed comparable performance in the bench-scale fixed-bad cyclic operations. As a part of this project, we also attempted substitution of La and Sr with Ca and Ba, and Co with Mn, Ni and Cu with little success, but the overall project goal of reducing sorbent cost in terms of raw material and manufacturing expenses was successful.

01 COAL, LIGNITE, AND PEAT↗

Conformal Hierarchical Simulation-Based Inference with Local Validity

Trustworthy and interpretable uncertainty quantification is a long-standing challenge in artificial intelligence. Simulation-based inference (SBI) comprises a broad swath of approaches for estimating latent parameters with uncertainties. Although flexible neural density estimators in SBI can be remark- ably expressive capturing highly structured, high-dimensional posteriors their credible regions can be badly mis-calibrated and are often only accompanied by heuristic coverage checks. We present the first SBI framework that delivers finite-sample local valid coverage guarantees that hold in the neighborhood of each observation. Our framework can couple any off-the-shelf hierarchical SBI engine with a confor- mal Bayesian post-processing step that operates on the posterior predictive density. A kernel-weighted conformity score adapts the conformal quantile to the local geometry of the data, yielding prediction sets that are simultaneously (i) marginally calibrated, (ii) locally valid, and (iii) hierarchical, handling global and observation-specific parameters in a single pass. Through experiments on synthetic data and benchmarks from neuroscience and physics, we show that our approach attains 1 − α coverage, where prior SBI methods under- or over-cover. Our approach also maintains a competitive, credible set size with minimal computational overhead. Finally, our approach can be used to make predictions on real data and give valid credible regions modulo weight-initialization-based model mis-specification.

Trivedi, Shubhendu [Fermilab]↗

Joule heating in bad and slow metals

Heat supplied to a metal is absorbed by the electrons and then transferred to the lattice. In conventional metals energy is released to the lattice by phonons emitted from the Lindhard continuum. However in a 'bad' metal, with short mean free path, the low energy Lindhard continuum is destroyed. To describe energy transfer to the lattice in these cases we obtain a general Kubo formula for the energy relaxation rate in terms of the electronic density spectral weight \text{lm} \, G^R_{nn}(\omega_{k},k) lm G n n R ( ω k , k ) evaluated on the phonon dispersion \omega_k ω k . We apply our Kubo formula to the high temperature Hubbard model, using recent data from quantum Monte Carlo and experiments in ultracold atoms to characterize \text{lm} \, G^R_{nn}(\omega_{k},k) lm G n n R ( ω k , k ) . We furthermore use recent data from electron energy-loss spectroscopy to estimate the energy relaxation rate of the cuprate strange metal to a high energy optical phonon. As a second, distinct, application of our formalism we consider 'slow' metals. These are defined to have Fermi velocity less than the sound velocity, so that particle-hole pairs are kinematically unable to emit phonons. We obtain an expression for the energy relaxation rate of a slow metal in terms of the optical conductivity.

36 MATERIALS SCIENCE↗

Weathering the Worst Solar Storms

When the last really big solar storm hit in 1921, Earth’s magnetic field funneled a wave of electrically charged particles toward the ground, where they induced a current along telegraph lines and railroad tracks, setting to telegraph offices and train stations—and the fledgling electric grid went dark. Almost a century later, today’s grid is bigger, more interconnected, and even more susceptible to a solar storm disaster. Los Alamos National Laboratory is developing a scientific analysis about how frequently a major geomagnetic storm might strike, which regions of the country are most vulnerable, and how bad it might be. This analysis is part of a plan to support electric utility companies and government regulators in taking the necessary steps to spare us all from the nightmare of days, weeks, or even months without power.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Towards a bayesian seismotectonic zoning for use in Probabilistic Seismic Hazard Assessment (PSHA)

The mathematical representation of seismic sources is an important part of probabilistic seismic hazard assessment. It reflects the association of the seismicity with the tectonically-active geological structures evidenced by seismotectonic studies. Given that most active faults are not characterized well enough, seismic sources are generally defined as areal zones, delimited with finite boundary polygons, within which the geological features of active tectonics and the seismicity are deemed homogeneous (e.g., focal depth, seismicity rate, and maximum magnitude). Besides the lack of data (e.g., narrow range of recorded magnitudes), the application of this representation generates different problems: 1) a large sensitivity of resulting hazard maps on the location of zone boundaries, while these boundaries are set by expert decision; 2) the zoning can not represent any variation in faulting mechanism; 3) the seismicity rates are distributed throughout the zones and we lose the location of the determinant information used for their calculation. We propose an exploratory study for an alternative procedure in area source modeling. First, different data (e.g., geomorphology, geology, fault orientations) will be combined by using automated spatial partitioning (investigation of both supervised and unsupervised methods) in order to obtain several information classes, which may be defined as areal source zones. Then, a given hypocenter belonging to a given ''zone'', from now on called seismicity model, will be expressed by a probability computed from the 2D (spatial) probability density function (pdf) for the active tectonic model used as an a priori and updated with specific data from seismicity catalogs (e.g., focal mechanism) or other new data sources (e.g., geomorphology, subsurface exploration). This hypocenter will thus be allowed to contribute to several models, with weights given by the value of the pdf for each model. The annual rate of occurrence, for a given model, will be calculated by the weighted average of the different hypocenter contributions contained in this model. Future applications will couple the seismicity models to Ground Motion Prediction Equations. In consequence, the results will provide the full spectrum of variability in the hazard and will highlight zones badly constrained and deserving to be more studied.

58 GEOSCIENCES↗

Structure formation from non-Gaussian initial conditions: Multivariate biasing, statistics, and comparison with N-body simulations

We study structure formation in the presence of primordial non-Gaussianity of the local type with parameters f{sub NL} and g{sub NL}. We show that the distribution of dark-matter halos is naturally described by a multivariate bias scheme where the halo overdensity depends not only on the underlying matter density fluctuation {delta} but also on the Gaussian part of the primordial gravitational potential {phi}. This corresponds to a non-local bias scheme in terms of {delta} only. We derive the coefficients of the bias expansion as a function of the halo mass by applying the peak-background split to common parametrizations for the halo mass function in the non-Gaussian scenario. We then compute the halo power spectrum and halo-matter cross spectrum in the framework of Eulerian perturbation theory up to third order. Comparing our results against N-body simulations, we find that our model accurately describes the numerical data for wave numbers k{<=}0.1-0.3h Mpc{sup -1} depending on redshift and halo mass. In our multivariate approach, perturbations in the halo counts trace {phi} on large scales, and this explains why the halo and matter power spectra show different asymptotic trends for k{yields}0. This strongly scale-dependent bias originates from terms at leading order in our expansion. This is different from what happens using the standard univariate local bias where the scale-dependent terms come from badly behaved higher-order corrections. On the other hand, our biasing scheme reduces to the usual local bias on smaller scales, where |{phi}| is typically much smaller than the density perturbations. We finally discuss the halo bispectrum in the context of multivariate biasing and show that, due to its strong scale and shape dependence, it is a powerful tool for the detection of primordial non-Gaussianity from future galaxy surveys.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Steps toward determination of the size and structure of the broad-line region in active galactic nuclei. 5: Variability of the ultraviolet continuum and emission lines of NGC 3783

We report on the results of intensive ultraviolet spectral monitoring of the Seyfert 1 galaxy NGC 3783. The nucleus of NGC 3783 was observed with the International Ultraviolet Explorer satellite on a regular basis for a total of 7 months, once every 4 days for the first 172 days and once every other day for the final 50 days. Significant variability was observed in both continuum and emission-line fluxes. The light curves for the continuum fluxes exhibited two well-defined local minima or 'dips,' the first lasting is less than or approximately 20 days and the second is less than or approximately 4 days, with additional episodes of relatively rapid flickering of approximately the same amplitude. As in the case of NGC 5548 (the only other Seyfert galaxy that has been the subject of such an intensive, sustained monitoring effort), the largest continuum variations were seen at the shortest wavelengths, so that the continuum became 'harder' when brighter. The variations in the continuum occurred simultaneously at all wavelengths (delta(t) is less than 2 days). Generally, the amplitude of variability of the emission lines was lower than (or comparable to) that of the continuum. Apart from Mg II (which varied little) and N V (which is relatively weak and badly blended with Ly(alpha), the light curves of the emission lines are very similar to the continuum light curves, in each case with a small systematic delay or 'lag.' As for NGC 5548, the highest ionization lines seem to respond with shorter lags than the lower ionization lines. The lags found for NGC 3783 are considerably shorter than those obtained for NGC 5548, with values of (formally) approximately 0 days for He II + O III), and approximately 4 days for Ly(alpha) and C IV. The data further suggest lags of approximately 4 days for Si IV + O IV) and 8-30 days for Si III + C III). Mg II lagged the 1460 A continuum by approximately 9 days, although this result depends on the method of measuring the line flux and may in fact be due to variability of the underlying Fe II lines. Correlation analysis further shows that the power density spectrum contains substantial unresolved power over timescales of is less than or approximately 2 days, and that the character of the continuum variability may change with time.

Reichert, G. A.↗

Structural transition and anisotropic magnetism in disordered Zintl phase Eu 7 Ga 6 Sb 8

Single crystals of the Zintl compound Eu 7 Ga 6 Sb 8 were synthesized using a Ga-Sb flux. We report the temperature (T) and magnetic field (H) dependence of the magnetic susceptibility (χ), magnetization (M), resistivity (ρ), specific heat (C), and thermal expansion (α). We also report high-resolution powder x-ray diffraction data that support a structural phase transition with accompanying signatures seen in C(T), ρ(T), and α(T). We find Eu 7 Ga 6 Sb 8 exhibits antiferromagnetic ordering at T N1 = 9.0 K from anomalies seen in χ(T), C(T), and α(T), as well as a potential reorientation of Eu 2+ spins at T N2 = 7.5 K and T N3 = 7.2 K. In conclusion, density functional theory calculations predict Eu 7 Ga 6 Sb 8 to be semiconducting; however, electrical resistivity measurements show bad-metal behavior that indicates the presence of disorder.

36 MATERIALS SCIENCE↗

Progress in Grid Generation: From Chimera to DRAGON Grids

Hybrid grids, composed of structured and unstructured grids, combines the best features of both. The chimera method is a major stepstone toward a hybrid grid from which the present approach is evolved. The chimera grid composes a set of overlapped structured grids which are independently generated and body-fitted, yielding a high quality grid readily accessible for efficient solution schemes. The chimera method has been shown to be efficient to generate a grid about complex geometries and has been demonstrated to deliver accurate aerodynamic prediction of complex flows. While its geometrical flexibility is attractive, interpolation of data in the overlapped regions - which in today's practice in 3D is done in a nonconservative fashion, is not. In the present paper we propose a hybrid grid scheme that maximizes the advantages of the chimera scheme and adapts the strengths of the unstructured grid while at the same time keeps its weaknesses minimal. Like the chimera method, we first divide up the physical domain by a set of structured body-fitted grids which are separately generated and overlaid throughout a complex configuration. To eliminate any pure data manipulation which does not necessarily follow governing equations, we use non-structured grids only to directly replace the region of the arbitrarily overlapped grids. This new adaptation to the chimera thinking is coined the DRAGON grid. The nonstructured grid region sandwiched between the structured grids is limited in size, resulting in only a small increase in memory and computational effort. The DRAGON method has three important advantages: (1) preserving strengths of the chimera grid; (2) eliminating difficulties sometimes encountered in the chimera scheme, such as the orphan points and bad quality of interpolation stencils; and (3) making grid communication in a fully conservative and consistent manner insofar as the governing equations are concerned. To demonstrate its use, the governing equations are discretized using the newly proposed flux scheme, AUSM+, which will be briefly described herein. Numerical tests on representative 2D inviscid flows are given for demonstration. Finally, extension to 3D is underway, only paced by the availability of the 3D unstructured grid generator.

Liou, Meng-Sing↗

Method of calibrating an interferometer and reducing its systematic noise

Methods of operation and data analysis for an interferometer so as to eliminate the errors contributed by non-responsive or unstable pixels, interpixel gain variations that drift over time, and spurious noise that would otherwise degrade the operation of the interferometer are disclosed. The methods provide for either online or post-processing calibration. The methods apply prescribed reversible transformations that exploit the physical properties of interferograms obtained from said interferometer to derive a calibration reference signal for subsequent treatment of said interferograms for interpixel gain variations. A self-consistent approach for treating bad pixels is incorporated into the methods.

Hammer, Philip D.↗

Cold nuclear matter effects in J/(psi) production

Lattice QCD predicts that, above a certain critical energy density or temperature, strongly interacting matter undergoes a phase transition from the hadronic world to a quark-gluon plasma state, where the coloured quarks and gluons are no longer bound to colourless hadrons. The suppression of quarkonium production in high-energy nuclear collisions is one of the most interesting signatures of QGP formation, for two reasons: due to their large masses, charm and beauty quarks are created only in the initial hard scattering processes, before the QGP is formed; and the Q{bar Q} binding potential should be screened in the deconfined colour medium. Until the LHC starts colliding Pb nuclei, charm is the heaviest quark that can check the validity of the finite temperature QCD predictions, given the much smaller beauty production cross sections. However, the interpretation of the presently available results on charmonium suppression in heavy-ion collisions, obtained at the SPS and RHIC, is hampered by a multitude of other 'nuclear effects', which exist even in the absence of QGP formation, such as the badly understood nuclear modifications of the gluon distribution functions, the level of energy lost by the partons traversing the nuclei before producing the Q{bar Q} pair, the rate at which the nascent quarkonium state is broken up by the surrounding nuclear matter, etc. Fortunately, most of these 'cold nuclear matter' effects can be studied on the basis of proton-nucleus measurements. However, care must be taken when converting the p-A observations into a reference baseline that can be used in the analysis of the heavy-ion data. In particular, it has recently been shown [1] that it is wrong to assume that the rate of final-state Glauber-like J/{psi} absorption, usually called the 'J/{psi} absorption cross section', {sigma}{sub abs}{sup J/{psi}}, is independent of the collision energy and of the charmonium kinematics, as was previously assumed in the analysis of the SPS heavy-ion data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗