Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atomic techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effect of Sulfonation Level on the Percolated Morphology and Proton Conductivity of Hydrated Fluorine-Free Copolymers: Experiments and Simulations

Using all-atom molecular dynamics simulations and a variety of experimental methods, we previously reported on a linear polyethylene with pendant phenyl sulfonated groups precisely on every fifth carbon along the backbone. With increasing relative humidity this fluorine-free polymer self-assembled to form nanoscale water channels and exhibited exceptional proton conductivity. Expanding upon those findings, here we explore partially sulfonated random copolymers, referred to as p 5PhSH-Y. Using either acetyl sulfate or sulfuric acid, a wide range of sulfonation levels were prepared ( Y = 34−98%) corresponding to ion-exchange capacities (IEC) of 2.0−4.4 mmol/g. Combining experimental techniques and all-atom molecular dynamics simulations, we study the effect of Y on water uptake, nanoscale morphology, and the proton/water transport properties of p5PhSH- Y . The proton conductivity of p 5PhSH- Y increases with relative humidity and with Y and achieves values in excess of 0.1 S/cm. These high conductivities are attributed to high IEC and welldeveloped nanoscale percolated hydrophilic domains made possible by the flexible backbone. We quantitatively describe the nature of the water channels using the characteristic distance, channel width distribution, the area per sulfonate group at the hydrophilic/ hydrophobic interface, and the fractal dimension. Notably, the channel widths and the areas per sulfonate group are nominally independent of the level of sulfonation, while depending significantly on the level of hydration. The fractal dimension of the water channels correlates strongly with the water diffusion coefficients calculated from the molecular dynamics (MD) simulations. These findings demonstrate that the p 5PhSH- Y hydrocarbon copolymers can be modified to tune properties, particularly proton conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Thin Alumina Film as a Tritium Adsorption Inhibitor for Stainless Steel 316

The effect of a thin alumina coating on stainless-steel 316 (SS316) samples on tritium adsorption and transport are discussed. Compact films of alumina were produced on the surfaces of pristine SS316 samples using an atomic layer deposition (ALD) technique. Subsequently, these samples were exposed for 24 hours to a deuterium-tritium gas mixture (P T =0.5 atm, 25°C). A combination of methods including selective-etching and programmed thermal desorption were employed to assess both, the depth profile of the tritium concentration in the sample and the total quantity of tritium absorbed respectively. Tritium was quantitatively determined through the measurement of beta radioactivity using liquid-scintillation counting techniques. Data suggest that SS316 with a thin film of alumina reduces the total tritium uptake by ~25% relative to uncoated samples. Significantly, such films appear to reduce, by a factor of 200, tritium diffusion into SS316 and therefore constitute an effective barrier against tritium transport. This observation is of practical importance for tritium and, generally, reactive gas handling.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Toward Low-Thermal-Budget Hafnia-Based Ferroelectrics via Atomic Layer Deposition

Since the first report of ferroelectricity in fluorite structure oxides a decade ago, significant attention has been devoted to studying hafnia-based ferroelectric material systems due to their promising properties and opportunities. To achieve such ferroelectric fluorite structure oxides at low temperatures (below 400 °C), stabilizing the metastable noncentrosymmetric orthorhombic phase is crucial. This review provides a comprehensive overview of atomic layer deposition (ALD) techniques for obtaining the orthorhombic phase for low-temperature ferroelectric applications. We discuss optimization of the ALD process for synthesizing high-quality, low-temperature crystallizing ferroelectric films, including doping, precursor and oxygen source selection, deposition temperature, and interface engineering. In addition, the techniques for stabilizing the ferroelectric phase by regulating the thermal budget and stress with various annealing methods and stressors are discussed. In conclusion, the review focuses on different techniques to reduce the thermal budget required to acquire ferroelectricity, making hafnia-based ferroelectric materials compatible with back-end-of-line and three-dimensional integration for a variety of future applications, including flexible electronics applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Bottom-up fabrication of scalable room-temperature diamond quantum computing and sensing technologies

The nitrogen-vacancy (NV) centre in diamond is a premier solid-state defect for quantum information processing and metrology. An integrated diamond quantum device harnesses the collective properties of multiple NV centres, enabling room-temperature quantum computing and sensing. While large-scale devices are poised to fill an important gap in the burgeoning quantum technology landscape, their practical realisation has not been achieved using current top-down fabrication techniques such as ion implantation. Consequently, this necessitates the development of a bottom-up fabrication technique, which is scalable, deterministic, and possesses atomic-scale precision. Informed by existing methods for fabricating phosphorous defect qubits in silicon, we envision a hydrogen depassivation lithography technique for atomically-precise manufacturing of nitrogen-vacancy centres in diamond. This perspective article outlines a viable multi-step procedure for realising scalable fabrication of diamond quantum devices and identifies the key challenges in its development.

CVD↗
NASA NTRS1982

Evaluation of fuel injection configurations to control carbon and soot formation in small GT combustors

An experimental program to investigate hardware configurations which attempt to minimize carbon formation and soot production without sacrificing performance in small gas turbine combustors has been conducted at the United Technologies Research Center. Four fuel injectors, embodying either airblast atomization, pressure atomization, or fuel vaporization techniques, were combined with nozzle air swirlers and injector sheaths, and evaluated at test conditions which included and extended beyond standard small gas turbine combustor operation. Extensive testing was accomplished with configurations embodying either a spill return or a T-vaporizer injector. Minimal carbon deposits were observed on the spill return nozzle for tests using either Jet A or ERBS test fuel. A more extensive film of soft carbon was observed on the vaporizer after operation at standard engine conditions, with large carbonaceous growths forming on the device during off-design operation at low combustor inlet temperature. Test results indicated that smoke emission levels depended on the combustor fluid mechanics (especially the mixing rates near the injector), the atomization quality of the injector and the fuel hydrogen content.

Rosfjord, T. J.↗
DOE OSTI2021

Topological superconductivity in skyrmion lattices

Atomic manipulation and interface engineering techniques have provided an intriguing approach to custom-designing topological superconductors and the ensuing Majorana zero modes, representing a paradigm for the realization of topological quantum computing and topology-based devices. Magnet-superconductor hybrid (MSH) systems have proven to be experimentally suitable to engineer topological superconductivity through the control of both the complex structure of its magnetic layer and the interface properties of the superconducting surface. Here, we demonstrate that two-dimensional MSH systems containing a magnetic skyrmion lattice provide an unprecedented ability to control the emergence of topological phases. By changing the skyrmion radius, which can be achieved experimentally through an external magnetic field, one can tune between different topological superconducting phases, allowing one to explore their unique properties and the transitions between them. In these MSH systems, Josephson scanning tunneling spectroscopy spatially visualizes one of the most crucial aspects underlying the emergence of topological superconductivity, the spatial structure of the induced spin–triplet correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Development and Application of In Situ Nanocharacterization to Photocatalytic Materials for Solar Fuel Generation

Photocatalytic materials offer an attractive approach for converting solar energy into chemical energy but the performance of the current generation of materials is insufficient to make a technology viable. To address this deficiency, it is necessary to develop a fundamental atomic level understanding of the functioning of such materials so that strategies can be developed to improve performance. This project was undertaken to explore the fundamental structure and properties of photocatalytic materials using atomic resolution imaging and spectroscopy techniques available on advanced transmission electron microscopy. Specifically, there is a need to develop an understanding of how atomic structures/defects and nanoparticle configurations regulate electronic, optical, and catalytic properties to facilitate the design of next generation photocatalysts for solar fuel production. The work focused on fundamental materials information that can be gained from advanced transmission electron microscopy study on novel and existing photocatalytic systems with an emphasis on the hydrogen evolution reaction (HER). Throughout the project, new instrumentation and microscopy characterization tools were developed. Two focus areas were: developing in situ TEM methods and advanced electron energy-loss spectroscopic for nanoscale analysis of catalysts. The work spanned a period of 12 years and for convenience, the report is divided into four phases, approximately corresponding to the four funding periods of the program. Most of the significant results are reported in archival journal publications.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Containerless high temperature property measurements by atomic fluorescence

Laser induced fluorescence (LIF) techniques for containerless study of high temperature processes and material properties was studied. Gas jet and electromagnetic levitation and electromagnetic and laser heating techniques are used with LIF in earth-based containerless high temperature experiments. Included are the development of an apparatus and its use in the studies of (1) chemical reactions on Al2O3, molybdenum, tungsten and LaB6 specimens, (2) methods for noncontact specimen temperature measurement, (3) levitation jet properties and (4) radiative lifetime and collisional energy transfer rates for electronically excited atoms.

Schiffman, R. A.↗
DOE OSTI2024

Unveiling the Stability of Encapsulated Pt Catalysts Using Nanocrystals and Atomic Layer Deposition

Platinum exhibits desirable catalytic properties, but it is scarce and expensive. Optimizing its use in key applications such as emission control catalysis is important to reduce our reliance on such a rare element. Supported Pt nanoparticles (NPs) used in emission control systems deactivate over time because of particle growth in sintering processes. Here, in this work, we shed light on the stability against sintering of Pt NPs supported on and encapsulated in Al 2 O 3 using a combination of nanocrystal catalysts and atomic layer deposition (ALD) techniques. We find that small amounts of alumina overlayers created by ALD on preformed Pt NPs can stabilize supported Pt catalysts, significantly reducing deactivation caused by sintering, as previously observed by others. Combining theoretical and experimental insights, we correlate this behavior to the decreased propensity of oxidized Pt species to undergo Ostwald ripening phenomena because of the physical barrier imposed by the alumina overlayers. Furthermore, we find that highly stable catalysts can present an abundance of under-coordinated Pt sites after restructuring of both Pt particles and alumina overlayers at a high temperature (800 °C) in C 3 H 6 oxidation conditions. The enhanced stability significantly improves the Pt utilization efficiency after accelerated aging treatments, with encapsulated Pt catalysts reaching reaction rates more than two times greater than those of a control supported Pt catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Large area transparent refractory aerogels with high solar thermal performance

Application of transparent silica aerogels in low-temperature solar thermal systems has led to major improvements in performance. In high temperature concentrating solar thermal (CST) systems, aerogels have yet to demonstrate the necessary scalability, durability, and performance to support their widespread deployment. Here, large-area transparent refractory aerogel tiles are synthesized and shown to achieve a record-high receiver figure-of-merit (FOM) at high temperatures. The work leverages a scaled-up process for sol–gel synthesis to control the density of the aerogels for improved solar transmittance and adapts a previous atomic layer deposition (ALD) technique with the aid of predictive reaction-transport modeling. After aging for 10 days at 700 °C, the large-area tiles exhibit a solar-weighted transmittance of 95.6 % and a thermal emittance of 0.31, corresponding to a FOM of 80 % at 100 suns and 700 °C. The observed sintering rates at 700 °C are comparably low to earlier one-inch aerogels, suggesting long-term stability under relevant operating conditions. Furthermore, the study indicates that refractory aerogels are scalable materials for efficient photothermal conversion at high temperatures.

Aerogels↗
DOE OSTI2025

Including Physics-Informed Atomization Constraints in Neural Networks for Reactive Chemistry

Machine learning interatomic potentials (MLIPs) have emerged as powerful tools for investigating atomistic systems with high accuracy and a relatively low computational cost. However, a common and unaddressed challenge with many current neural network (NN) MLIP models is their limited ability to accurately predict the relative energies of systems containing isolated or nearly isolated atoms, which appear in various reactive processes. To address this limitation, we present a mathematical technique for modifying any existing atom-centered NN architecture to account for the energies of isolated atoms. The result produces a consistent prediction of the atomization energy (AE) of a system using minimal constraints on the model. Using this technique, we build a model architecture that we call hierarchically interacting particle neural network (HIP-NN)-AE, an AE-constrained version of the HIP-NN, as well as ANI-AE, the AE-constrained version of the accurate NN engine for molecular energies (ANI). Our results demonstrate AE consistency of AE-constrained models, which drastically improves the AE predictions for the models. We compare the AE-constrained approach to unconstrained models as well as models from the literature in other scenarios, such as bond dissociation energies, bond dissociation pathways, and extensibility tests. These results show that the constraints improve the model performance in some of these tasks and do not negatively affect the performance on any tasks. The AE constraint approach thus offers a robust solution to the challenges posed by isolated atoms in energy prediction tasks.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Metal alloy microparticle tagging of UO 2 fuel pellets for nuclear forensics

A tagging strategy for UO 2 fuel pellets will be discussed which involves the creation of alloyed metal microparticles that can be tuned to create a unique identification (“barcode”) indicating provenance of the pellets. These specialized markers would contain high temperature resistant materials, such as Ti, Mo, and Cr, in small quantities such that they do not interfere with the performance of the pellets but are recoverable by standard analytical techniques. The Amazemet rePowder ultrasonic atomization system was used to manufacture the microparticles, and sample pellets were fabricated and sintered containing these dopants. Various techniques, such as Scanning Electron Microscopy (SEM) and Electron Probe Microanalysis (EPMA), were used to evaluate these sample pellets to determine if particles (and their alloy compositions) were recoverable. Details on how the particles were manufactured and characterized will be detailed, as well as results from their incorporation into test pellets. Next steps will involve the scale of this technique using more conventional mass production methods, as well as the implementation of other alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Directly resolving surface vs. lattice self-diffusion in iron at the nanoscale using in situ atom probe capabilities

Surface self-diffusion studies on metals under elevated reaction conditions are limited, as it is inherently challenging to unambiguously follow atomic transport across highly-reactive surfaces. Here, quantitative and mechanistic insight into thermally induced atomic transport processes in bcc α-iron at the sub-nanometer level was achieved using isotopic tracer techniques coupled with in situ atom probe tomography (APT) capabilities. Specifically, using a reactor directly connected to the APT, needle-shaped specimens fabricated from epitaxial thin films with an embedded 57 Fe tracer layer were annealed in Ar at 500 °C and 350 °C for 1 hour. Furthermore, the tracer was positioned at various depths in the APT specimen by field evaporation, enabling targeted and simultaneous analysis of lattice and surface diffusion. 57 Fe concentration profiles reveal lattice self-diffusion occurs at 500 °C on the order of ~7 – 9 monolayers, while lattice diffusion is not resolvable at 350 °C. Considerable surface transport was, however, observed at both conditions, where atomic transport over the specimen surface led to the formation of a thin (≤1 nm), isotopically-intermixed layer at the surface. Further, the observed isotopic redistributions at 500 °C were convoluted by additional processes occurring in the subsurface, such as atomic intermixing in correlation with lattice diffusion. However, surface diffusion was determined to be the primary transport process at 350 °C and was thereby quantified. Ultimately, these results demonstrate the significance of surface self-diffusion as a short circuit pathway. More broadly, this approach has the potential to provide detailed insight into (self-)diffusion mechanisms across various materials while targeting site-specific reactions under elevated reaction conditions.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Recovery of a Charred Painting Using Atomic Oxygen Treatment

A noncontact method is described which uses atomic oxygen to remove soot and char from the surface of a painting. The atomic oxygen was generated by the dissociation of oxygen in low pressure air using radio frequency energy. The treatment, which is an oxidation process, allows control of the amount of material to be removed. The effectiveness of char removal from half of a fire-damaged oil painting was studied using reflected light measurements from selected areas of the painting and by visual and photographic observation. The atomic oxygen was able to effectively remove char and soot from the treated half of the painting. The remaining loosely bound pigment was lightly sprayed with a mist to replace the binder and then varnish was reapplied. Caution should he used when treating an untested paint medium using atomic oxygen. A representative edge or corner should he tested first in order to determine if the process would be safe for the pigments present. As more testing occurs, a greater knowledge base will be developed as to what types of paints and varnishes can or cannot be treated using this technique. With the proper precautions, atomic oxygen treatment does appear to be a technique with great potential for allowing very charred, previously unrestorable art to be salvaged.

Rutledge, Sharon K.↗
DOE OSTI2022

Insights into Heterogeneous Catalysts under Reaction Conditions by In Situ/Operando Electron Microscopy

The advancement of clean energy and environment depends strongly on the development of efficient catalysts in a wide range of heterogeneous catalytic reactions, which has benefited from transmission electron microscopic techniques in determining the atomic-scale morphologies and structures. However, it is the morphology and structure under the catalytic reaction conditions that determine the performance of the catalyst, which has captured a surge of interest in developing and applying in situ/operando transmission electron microscopic techniques in heterogeneous catalysis. The major theme of this review is to highlight some of the most recent insights into heterogeneous catalysts under the relevant reaction conditions using in situ/operando transmission electron microscopic techniques. Rather than a comprehensive overview of the basic principles of in situ/operando techniques, this review focuses on the insights into the atomic-scale/nanoscale details of various catalysts ranging from single-component to multicomponent catalysts under heterogeneous catalytic, electrocatalytic, and photocatalytic reaction conditions involving both gas–solid and liquid–solid interfaces. Here, this focus is coupled with discussions of the correlation of the atomic, molecular, and nanoscale morphology, composition, and structure with the catalytic properties under the reaction conditions, shining light on the challenges and opportunities in design of nanostructured catalysts for clean and sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Peptoid-based hierarchically-structured biomimetic nanomaterials: Synthesis, characterization and applications

Peptoids (or poly-N-substituted glycines) is a promising class of bioinspired sequence-defined polymers due to their highly efficient synthesis, high chemical stability, enzyme hydrolysis resistance, and biocompatibility. By tuning the side chain chemistry of peptoids, it allows for a precise control over sequences and achieving a large side-chain diversity. Due to these unique features, in the last several years, many amphiphilic peptoids were designed as highly tunable building blocks for the preparation of biomimetic nanomaterials with well-defined hierarchical structures and desired functionalities. In this paper, we provide an overview of the recent achievements in this area by dividing them into the following three aspects. First, mica- and silica-templated peptoid self-assembly was summarized. Here, the presence of inorganic substrates provides the guarantee of investigating their self-assembly mechanisms and interactions between peptoids and substrates using nanoscale characterization techniques, particularly in situ atomic force spectroscopy (AFM) and AFM-based dynamic force spectroscopy (AFM-DFS). Second, solution-phase self-assembly of peptoids into nanotubes and nanosheets was presented, as well as their self-repair properties. Third, the applications of peptoid based nanomaterials were outlined, including the construction of catalytic nanomaterials as a template and cytosolic delivery as cargoes.

36 MATERIALS SCIENCE↗