Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Approximate boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Structure of the low-latitude boundary layer

High temporal resolution observations of the frontside magnetopause and plasma boundary layer made with the fast plasma analyzer aboard the ISEE 1 and 2 spacecraft are reported. The data are found to be compatible with a boundary layer that is always attached to the magnetopause but where the layer thickness has a large-scale spatial modulation pattern which travels tailward past the spacecraft. Periods are included when the thickness is essentially zero and others when it is of the order of 1 earth radius. The duration of these periods is highly variable but is typically in the range of 2-5 min corresponding to a distance along the magnetopuase of approximately 3-8 earth radii. The observed boundary layer features include a steep density gradient at the magnetopause with an approximately constant boundary layer plasma density amounting to about 25% of the magnetosheath density, and a second abrupt density decrease at the inner edge of the layer.

Sckopke, N.↗
NASA NTRS1978

A state-trajectory control law for dc-to-dc converters

Mathematical representations of a state-plane switching boundary employed in a state-trajectory control law for dc-to-dc converters are derived. Several levels of approximation to the switching boundary equations are presented, together with an evaluation of the effects of nonideal operating characteristics of converter power stage components on the shape and location of the boundary and the behavior of a system controlled by it. Digital computer simulations of dc-to-dc converters operating in conjunction with each of these levels of control are presented and evaluated with respect to changes in transient and steady-state performance.

Burns, W. W., III↗
NASA NTRS1977

Analytic derivation and evaluation of a state-trajectory control law for dc-to-dc converters

Mathematical representations of a state-plane switching boundary employed in a state-trajectory control law for dc-to-dc converters are derived. Several levels of approximation to the switching boundary equations are presented, together with an evaluation of the effects of nonideal operating characteristics of converter power stage components on the shape and location of the boundary and the behavior of a system controlled by it. Digital computer simulations of dc-to-dc converters operating in conjunction with each of these levels of control are presented and evaluated with respect to changes in transient and steady-state performance.

Burns, W. W., III↗
NASA NTRS1977

An implicit-iterative solution of the heat conduction equation with a radiation boundary condition

For the problem of predicting one-dimensional heat transfer between conducting and radiating mediums by an implicit finite difference method, four different formulations were used to approximate the surface radiation boundary condition while retaining an implicit formulation for the interior temperature nodes. These formulations are an explicit boundary condition, a linearized boundary condition, an iterative boundary condition, and a semi-iterative boundary method. The results of these methods in predicting surface temperature on the space shuttle orbiter thermal protection system model under a variety of heating rates were compared. The iterative technique caused the surface temperature to be bounded at each step. While the linearized and explicit methods were generally more efficient, the iterative and semi-iterative techniques provided a realistic surface temperature response without requiring step size control techniques.

Williams, S. D.↗
NASA NTRS1983

Growth of Goertler vortices in compressible boundary layers along curved surfaces

An investigation of the growth of the three-dimensional, counter-rotating, longitudinal type vortices is considered in two-dimensional laminar compressible boundary-layer flow. The basic approximation of the disturbance equations that includes the terms due to boundary layer growth is considered and solved numerically. These terms are shown to have large local effects near the neutral stability region. The study shows that the instability of the boundary layer with respect to the three-dimensional vortices sets in at higher Goertler number as Mach number increases. Also the maximum amplitude ratio of the vortices is reduced by about 20 percent as Mach number increases from 0 to 5.

El-Hady, N. M.↗
NASA NTRS1990

Scattering from coated structures and antenna pattern control using impedance surfaces, part A/B

The scattering from coated, conducting structures, specifically the coated dihedral corner reflector configuration and the coated strip/plate configuration is examined. The formulation uses impedance-wedge Uniform Theory of Diffraction scattering coefficients to calculate the diffracted fields. A finite-thickness coating is approximated using the impedance boundary condition to arrive at an equivalent impedance for the coating. The formulation of the impedance wedge coefficients is outlined. Far-field, perfectly conducting approximations are discussed. Problems with the present dihedral corner reflector model for certain angles of incidence and observation are discussed along with a potentially rectifying modification. Also, the capacity to measure the electromagnetic properties of lossy materials was developed. The effects of using multiple material coatings on the radiation pattern of the horn antenna were studied. Numerous computations were devoted toward the inverse problem of synthesizing desired radiation patterns using the impedance surfaces. Stabilizing the equivalent sheet impedance using the linear control condition was attempted, and it was found to be a very difficult task.

Balanis, Constantine A.↗
NASA NTRS1951

Calculations of Laminar Heat Transfer Around Cylinders of Arbitrary Cross Section and Transpiration-Cooled Walls with Application to Turbine Blade Cooling

An approximate method for development of flow and thermal boundary layers in laminar regime on cylinders with arbitrary cross section and transpiration-cooled walls is obtained by use of Karman's integrated momentum equation and an analogous heat-flow equation. Incompressible flow with constant property values throughout boundary layer is assumed. Shape parameters for approximated velocity and temperature profiles and functions necessary for solution of boundary-layer equations are presented as charts, reducing calculations to a minimum. The method is applied to determine local heat-transfer coefficients and surface temperature-cooled turbine blades for a given flow rate. Coolant flow distributions necessary for maintaining uniform blade temperatures are also determined.

TURBINE COOLING↗
NASA NTRS1990

Singular perturbation analysis of AOTV-related trajectory optimization problems

The problem of real time guidance and optimal control of Aeroassisted Orbit Transfer Vehicles (AOTV's) was addressed using singular perturbation theory as an underlying method of analysis. Trajectories were optimized with the objective of minimum energy expenditure in the atmospheric phase of the maneuver. Two major problem areas were addressed: optimal reentry, and synergetic plane change with aeroglide. For the reentry problem, several reduced order models were analyzed with the objective of optimal changes in heading with minimum energy loss. It was demonstrated that a further model order reduction to a single state model is possible through the application of singular perturbation theory. The optimal solution for the reduced problem defines an optimal altitude profile dependent on the current energy level of the vehicle. A separate boundary layer analysis is used to account for altitude and flight path angle dynamics, and to obtain lift and bank angle control solutions. By considering alternative approximations to solve the boundary layer problem, three guidance laws were derived, each having an analytic feedback form. The guidance laws were evaluated using a Maneuvering Reentry Research Vehicle model and all three laws were found to be near optimal. For the problem of synergetic plane change with aeroglide, a difficult terminal boundary layer control problem arises which to date is found to be analytically intractable. Thus a predictive/corrective solution was developed to satisfy the terminal constraints on altitude and flight path angle. A composite guidance solution was obtained by combining the optimal reentry solution with the predictive/corrective guidance method. Numerical comparisons with the corresponding optimal trajectory solutions show that the resulting performance is very close to optimal. An attempt was made to obtain numerically optimized trajectories for the case where heating rate is constrained. A first order state variable inequality constraint was imposed on the full order AOTV point mass equations of motion, using a simple aerodynamic heating rate model.

Calise, Anthony J.↗
NASA NTRS1989

Experimental measurements of large scale structures in an incompressible turbulent boundary layer using correlated X-probes

Hot-wire anemometry measurements in an incompressible turbulent boundary-layer flow over a flat plate, at zero pressure gradient were made using two X-probes simultaneously. The over seven meters long flat plate installed within the wind tunnel generated an approximately 20-cm thick boundary layer, and R(theta) of about 4,000. The mean velocity and turbulence intensity data very close to the wall were measured with a single-wire. Space-time velocity fluctuation and shear-product correlation measurements enabled the calculation of large-scale structure convection velocity, inclination-angle to the wall, and spatial extent in space. The shear-product correlation results are reported for the first time.

Strataridakis, Constantine J.↗
NASA NTRS1978

Boundary layer analysis of a Centaur standard shroud

An analytical boundary layer investigation was carried out in conjunction with an experimental wind tunnel test to determine the discharge characteristics of the Centaur shroud ascent vent system on the Titan/Centaur launch vehicle. This involved estimating the effect of the local boundary layers on the vent discharge for vehicle Mach numbers ranging from 0.8 to 1.56. The growth of the boundary layer along the vehicle was influenced by the interaction with flanges protruding into the flow and by the longitudinal corrugations in the vehicle surface. The effects of the flange and corrugations were treated by approximate techniques. In addition, boundary layer calculations were made for a 3 percent model of the launch vehicle compared with experimental results.

Hingst, W. R.↗
NASA NTRS1972

Calculation of free fall trajectories based on numerical optimization techniques

The development of a means of computing free-fall (nonthrusting) trajectories from one specified point in the solar system to another specified point in the solar system in a given amount of time was studied. The problem is that of solving a two-point boundary value problem for which the initial slope is unknown. Two standard methods of attack exist for solving two-point boundary value problems. The first method is known as the initial value or shooting method. The second method of attack for two-point boundary value problems is to approximate the nonlinear differential equations by an appropriate linearized set. Parts of both boundary value problem solution techniques described above are used. A complete velocity history is guessed such that the corresponding position history satisfies the given boundary conditions at the appropriate times. An iterative procedure is then followed until the last guessed velocity history and the velocity history obtained from integrating the acceleration history agree to some specified tolerance everywhere along the trajectory.

Source record↗
NASA NTRS1950

Investigation of High-Subsonic Performance Characteristics of a 12 Degree 21-Inch Conical Diffuser, Including the Effects of Change in Inlet-Boundary-Layer Thickness

Investigations were conducted of a 12 degree 21-inch conical diffuser of 2:l area ratio to determine the interrelation of boundary layer growth and performance characteristics. surveys were made of inlet and exit from, longitudinal static pressures were recorded, and velocity profiles were obtained through an inlet Reynolds number range, determined From mass flows and based on inlet diameter of 1.45 x 10(exp 6) to 7.45 x 10(exp 6) and a Mach number range of 0.11 to approximately choking. These investigations were made to two thicknesses of inlet boundary layer. The mean value, over the entire range of inlet velocities, of the displacement thickness of the thinner inlet boundary layer was approximately 0.035 inch and that of the thicker inlet boundary layer was approximately six times this value. The loss coefficient in the case of the thinner inlet boundary layer had a value between 2 to 3 percent of the inlet impact pressure over most of the air-flow range. The loss coefficient with the thicker inlet boundary layer was of the order of twice that of the thinner inlet boundary layer at low speeds and approximately three times at high speeds. In both cases the values were substantially less than those given in the literature for fully developed pipe flow. The static-pressure rise for the thinner inlet boundary layer was of the order of 95 percent of that theoretically possible over the entire speed range. For the thicker inlet boundary layer the static pressure rise, as a percentage of that theoretically possible, ranged from 82 percent at low speeds to 68 percent at high speeds.

Copp, Martin R.↗
NASA NTRS1978

Thermal response behavior of boundary-layer flows

This paper presents an approximate, but general, analysis for the thermal response behavior of incompressible, constant property, laminar boundary layer flow over a smooth object of arbitrary shape. It encompasses the classic time-dependent Leveque problem as its special case. Comparisons with available data show that, for fluids with Prandtl number of the order of unity or larger, this analytical solution is able to provide reasonably accurate results for most engineering applications. Under certain restrictive conditions, it can also be used to predict the thermal response of a compressible boundary layer flow.

Lin, F. N.↗
NASA NTRS1995

On High-Order Radiation Boundary Conditions

In this paper we develop the theory of high-order radiation boundary conditions for wave propagation problems. In particular, we study the convergence of sequences of time-local approximate conditions to the exact boundary condition, and subsequently estimate the error in the solutions obtained using these approximations. We show that for finite times the Pade approximants proposed by Engquist and Majda lead to exponential convergence if the solution is smooth, but that good long-time error estimates cannot hold for spatially local conditions. Applications in fluid dynamics are also discussed.

Hagstrom, Thomas↗
NASA NTRS1984

Two recent extensions of the vortex method

The vortex method, coupled to an integral boundary-layer solver, is applied to the numerical simulation of high-Reynolds-number, separated flows in two new cases: a bluff body in a wind tunnel and flow in a cascade. In the bluff body case, the blockage effect of the tunnel walls is included approximately, assuming an inviscid boundary condition at the walls. The resulting increase in drag is computed, and compares well with a small-disturbance theory and with experiments. The results for flow in a cascade are compared with results from two finite-difference codes for a single-blade case, and good agreement is found. When a staggered cascade is treated with five independent blades, the simulation predicts rotating stall, depending on the angle of attack, and the essential features of the flow are correct. The sensitivity of this phenomenon to various parameters is studied and the stall boundary is found.

Spalart, P. R.↗
NASA NTRS1986

Calculation of convective heating on proposed aeroassist flight experiment vehicle

Convective heating calculations of a NASA aeroassist flight experiment (AFE) configuration consisting of a blunted, elliptic cone raked off at the base, and fitted with a skirt-type afterbody with a generous corner radius, are presented. The HALIS inviscid flowfield code is used to supply edge properties to an approximate three-dimensional boundary-layer method to calculate the surface heating. Calculations at Mach number 9.86 and approximate Reynolds number of 500,000, for angles of attack from -10 to 10 degrees, are in general good agreement with Langley 31-inch Mach 10 Tunnel experimental data. The results validate the application of the present overall AFE configuration heating pattern heating contours to aeroassist orbital transfer vehicle heating distribution determinations.

Hamilton, H. H., II↗