Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Acceleration Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Polyimides: Tribological properties and their use as lubricants

Friction, wear, and wear mechanisms of several different polyimide films, solid bodies, composites, and bonded solid lubricant films are compared and discussed. In addition, the effect of such parameters as temperatures, type of atmosphere, contact stress, and specimen configuration are investigated. A friction and wear transition occurs in some polyimides at elevated temperatures and this transition is related to molecular relaxations that occur in polyimides. Friction and wear data from an accelerated test (pin-on-disk) are compared to similar data from an end use test device (plain spherical bearing), and to other polymers investigated in a similar geometry.

Fusaro, R. L.↗
NASA NTRS1984

Polyimides - Tribological properties and their use as lubricants

Friction, wear, and wear mechanisms of several different polyimide films, solid bodies, composites, and bonded solid lubricant films are compared and discussed. In addition, the effect of such parameters as temperatures, type of atmosphere, contact stress, and specimen configuration are investigated. A friction and wear transition occurs in some polyimides at elevated temperatures and this transition is related to molecular relaxations that occur in polyimides. Friction and wear data from an accelerated test (pin-on-disk) are compared to similar data from an end use test device (plain spherical bearing), and to other polymers investigated in a similar geometry.

Fusaro, R. L.↗
NASA NTRS1995

Summary of OARE flight calibration measurements

To date, the Orbital Acceleration Research Experiment (OARE) has flown on the shuttle orbiter for five missions; namely, STS-40, STS-50, STS-58, STS-62, and STS-65. The OARE instrument system contains a three-axis accelerometer which can resolve accelerations to the nano-g (10(exp -9) g) level and a full calibration station to permit in situ bias and scale factor calibration measurements. This calibration capability eliminates the large uncertainty encountered with accelerometers flown in the past on the orbiter which use ground-based calibrations to provide absolute acceleration measurements. A detailed flight data report presentation is given for the OARE calibration measurements from all missions, along with an estimate of the calibration errors. The main aim is to collect, process, and present the calibration data in one archival report. These calibration data are the necessary key ingredient to produce the absolute acceleration levels from the OARE acceleration flight data.

Blanchard, Robert C.↗
NASA NTRS1982

Fundamental aspects of polyimide dry film and composite lubrication: A review

The tribological properties of polyimide dry films and composites are reviewed. Friction coefficients, wear rates, transfer film characteristics, wear surface morphology, and possible wear mechanisms of several different polyimide films, polyimide-bonded solid lubricants, polyimide solid bodies, and polyimide composites are discussed. Such parameters as temperature, type of atmosphere, load, contact stress, and specimen configuration are investigated. Data from an accelerated test device (Pin-on-Disk) are compared to similar data obtained from an end use application test device (plain spherical bearing).

Fusaro, R. L.↗
NASA NTRS1993

Detailed analysis of Honeywell In-Space Accelerometer data - STS-32

The Honeywell In-Space Accelerometer (HISA) system collected data in the mid-deck area of the Shuttle Columbia during the flight of STS-32, January 1990. The resulting data were to be used to investigate the response of crystal microstructure to different types of residual acceleration. The HISA is designed to detect and record transient and oscillatory accelerations. The sampling and electronics package stored averaged accelerations over two sampling periods; two sampling rates were available: 1 Hz and 50 Hz. Analysis of the HISA data followed the CMMR Acceleration Data Processing Guide, considering in-house computer modelling of a float-zone indium crystal growth experiment. Characteristic examples of HISA data showing the response to the primary reaction control system, Orbiter Maneuvering System operations, and crew treadmill activity are presented. Various orbiter structural modes are excited by these and other activities.

Rogers, Melissa J. B.↗
NASA NTRS1993

Preliminary OARE absolute acceleration measurements on STS-50

On-orbit Orbital Acceleration Research Experiment (OARE) data on STS-50 was examined in detail during a 2-day time period. Absolute acceleration levels were derived at the OARE location, the orbiter center-of-gravity, and at the STS-50 spacelab Crystal Growth Facility. The tri-axial OARE raw acceleration measurements (i.e., telemetered data) during the interval were filtered using a sliding trimmed mean filter in order to remove large acceleration spikes (e.g., thrusters) and reduce the noise. Twelve OARE measured biases in each acceleration channel during the 2-day interval were analyzed and applied to the filtered data. Similarly, the in situ measured x-axis scale factors in the sensor's most sensitive range were also analyzed and applied to the data. Due to equipment problem(s) on this flight, both y- and z- axis sensitive range scale factors were determined in a separate process (using the OARE maneuver data) and subsequently applied to the data. All known significant low-frequency corrections at the OARE location (i.e., both vertical and horizontal gravity-gradient, and rotational effects) were removed from the filtered data in order to produce the acceleration components at the orbiter's center-of-gravity, which are the aerodynamic signals along each body axes. Results indicate that there is a force of unknown origin being applied to the Orbiter in addition to the aerodynamic forces. The OARE instrument and all known gravitational and electromagnetic forces were reexamined, but none produce the observed effect. Thus, it is tentatively concluded that the Orbiter is creating the environment observed.

Blanchard, Robert C.↗
NASA NTRS2017

Applications of Satellite Data to Support Improvements in Irrigation and Groundwater Management in California

In agricultural regions around the world, threats to water supplies from drought and groundwater depletion are driving increased demand for tools to advance agricultural water use efficiency and support sustainable groundwater management. Satellite mapping of evapotranspiration (ET) from irrigated agricultural lands can provide agricultural producers and water resource managers with information that can be used to both optimize ag water use and improve estimates of groundwater withdrawals for irrigation. We describe the development of two remote sensing-based tools for ET mapping in California, including important lessons in terms of system design, partnership development, and transition to operations. For irrigation management, the integration of satellite data and surface sensor networks to provide timely delivery of information on crop water requirements can make irrigation scheduling more practical, convenient, and accurate.Developed through a partnership between NASA and the CA Department of Water Resources, the Satellite Irrigation Management Support (SIMS) framework integrates satellite data with information from agricultural weather networks to map crop canopy development and crop water requirements at the scale of individual fields. Information is distributed to agricultural producers and water managers via a web-based interface and web data services. SIMS also provides an API that facilitates integration with other irrigation decision support tools, such as CropManage and IrriQuest. Field trials using these integrated tools have shown that they can be used to sustain yields while improving water use efficiency and nutrient management. For sustainable groundwater management, the combination of satellite-derived estimates of ET and data on surface water deliveries for irrigation can increase the accuracy of estimates of groundwater pumping. We are developing an OpenET platform to facilitate access to ET data from multiple models and accelerate operational use of ET data in support of a range of water management applications, including implementation of the Sustainable Groundwater Management Act in CA. By providing a shared basis for decision making, we anticipate that the OpenET platform will accelerate implementation of solutions for sustainable groundwater management.

Satellite↗
NASA NTRS1972

Solar X-rays and particle acceleration

The process of solar flare acceleration of interplanetary particles, as measured by the fifth orbiting solar observatory, is explained. Data show the acceleration proceeds in two stages: (1) particle acceleration by induced electric fields arising from annihilating magnetic fields at the beginning stages of flares, and (2) a Fermi acceleration mechanism operating in a shock front produced by the flare.

Frost, K.↗
NASA NTRS2011

Assessment of an Automated Touchdown Detection Algorithm for the Orion Crew Module

Orion Crew Module (CM) touchdown detection is critical to activating the post-landing sequence that safe?s the Reaction Control Jets (RCS), ensures that the vehicle remains upright, and establishes communication with recovery forces. In order to accommodate safe landing of an unmanned vehicle or incapacitated crew, an onboard automated detection system is required. An Orion-specific touchdown detection algorithm was developed and evaluated to differentiate landing events from in-flight events. The proposed method will be used to initiate post-landing cutting of the parachute riser lines, to prevent CM rollover, and to terminate RCS jet firing prior to submersion. The RCS jets continue to fire until touchdown to maintain proper CM orientation with respect to the flight path and to limit impact loads, but have potentially hazardous consequences if submerged while firing. The time available after impact to cut risers and initiate the CM Up-righting System (CMUS) is measured in minutes, whereas the time from touchdown to RCS jet submersion is a function of descent velocity, sea state conditions, and is often less than one second. Evaluation of the detection algorithms was performed for in-flight events (e.g. descent under chutes) using hi-fidelity rigid body analyses in the Decelerator Systems Simulation (DSS), whereas water impacts were simulated using a rigid finite element model of the Orion CM in LS-DYNA. Two touchdown detection algorithms were evaluated with various thresholds: Acceleration magnitude spike detection, and Accumulated velocity changed (over a given time window) spike detection. Data for both detection methods is acquired from an onboard Inertial Measurement Unit (IMU) sensor. The detection algorithms were tested with analytically generated in-flight and landing IMU data simulations. The acceleration spike detection proved to be faster while maintaining desired safety margin. Time to RCS jet submersion was predicted analytically across a series of simulated Orion landing conditions. This paper details the touchdown detection method chosen and the analysis used to support the decision.

Gay, Robert S.↗
NASA NTRS1986

Digital filtering and acceleration pulse interpretation

It was concluded that the post processing digital filter is quite effective for removing unwanted high frequency and noise without distorting the signal. In addition, digital filtering is effective for smoothing low-level low resolution digital data where the digital stairstep phenomena are pronounced. Integrating the acceleration data to obtain velocity traces is quite useful. The velocity change provides a check on the validity of the acceleration trace. (Zero offsets in acceleration must be removed before integrating.) Average accelerations can be obtained from the velocity trace by dividing the change in velocity for an acceleration pulse by the pulse duration. One can obtain the peak of an equivalent triangular pulse by doubling the average acceleration.

Pasanella, E. L.↗
NASA NTRS2020

On Development of Three-Dimensional Visualization Capabilities in Glenn Research Center Communication Analysis Suite

With NASA’s upcoming mission to return to the Moon sustainably by 2024 and using that success as a means to step onto the barren world of Mars, it remains more important than ever to conduct research and planning as thoroughly and efficiently as possible. In a mission as complex as landing humans onto another celestial body, a network of orbiting satellites and ground stations must accurately and reliably communicate with each other, enabling crucial data communications throughout the mission. Visualizing this important data communication increases the understanding of the data and can accelerate analyses efforts. The purpose of this software development is to create an interactive visualization with data taken MATLAB® scripts in the GRC Communication Analysis Suite that is easy to understand, can show all necessary data, and display the data accurately. The main types of data to visualize are from the State Propagation, Line of Sight and Dynamic Link Margin scripts. These all show positions and orbits of satellites and ground stations, while the Line of Sight data shows when they have the ability to communicate with each other based on their respective antenna positions and fields of view. Additionally, the Dynamic Link Margin mode color-codes the communication link performance onto the Line of Sight access lines. Visualization requires a graphics language that is easily accessible, has the needed features, and able to easily read data produced by the GRC Communication Analysis Suite MATLAB® scripts. ThreeJS, a graphics library for Web Graphics Library, coded in JavaScript was selected for the visualization. The next part of the software development was to move the data from MATLAB® to the JavaScript. The best way to accomplish this was to implement a MATLAB® function converting the output data of the scripts to a JavaScript Object Notation file. A key part of the development was creating the visualization within JavaScript and ThreeJS to visualize any combination of planets, moons, orbits, satellites, ground stations, line of sight links, and handle future features without changing major parts of the code. The current visualization capability runs directly from MATLAB®, and can dynamically create any scene. This software development currently supports the lunar communications analysis underway by NASA, and can be easily expanded upon in the future to aid any analysis requirements to help plan current and future space missions.

Visualization↗
NASA NTRS1989

Seed population for about 1 MeV per nucleon heavy ions accelerated by interplanetary shocks

Data obtained between 1977 and 1982 by the ISEE 1 and ISEE 3 satellites on the composition of heavy ions of about 1 MeV per nucleon, accelerated in interplanetary shock events which followed solar flare events, are examined. It was found that the average relative abundances for C, O, and Fe in the shock events were very close to those found for energetic ions in the solar flares, suggesting that, at these energies, the shock accelerated particles have the solar energetic particles as their seed population. This hypothesis is supported by the fact that the Fe/O ratio in the solar particle events is very strongly correlated with the Fe/O ratio in associated diffusive shock events.

Tan, L. C.↗
NASA NTRS1997

An Acceleration Measurement Capability on International Space Station Supporting Microgravity Science Payloads

The conditions present in low-earth-orbit have enabled various scientific investigations to be conducted. A fundamental reason that space is a useful environment for science is the presence of a decreased effect of gravity while in orbital free-fall. Science investigations are conducted to study phenomena occurring as a result of reductions in buoyancy forces and phenomena enabled as a result of the apparent lack of gravity. The science community requires knowledge of the environment in which their experiments are being conducted. A general purpose measurement system was developed in the 1980's to supply scientific investigators with data of the residual acceleration environment. The Space Acceleration Measurement System, or SAMS, has flown aboard the NASA shuttle fleet over fourteen times, successfully acquiring acceleration measurement data in support of microgravity science experiments. As NASA continues its development of the International Space Station and its associated research payloads, it once again becomes necessary to address the requirement to measure the residual acceleration in support of the planned scientific investigations. As a follow-on to the SAMS project, SAMS-2 was initiated to investigate the requirements and develop the measurement system to support the microgravity science payloads aboard the International Space Station. The characteristics of the payload complement to be supported by SAMS-2 and the different capabilities provided by the station requires a fresh look at the design implementation of a general purpose measurement system. Not only is there a requirement for measurements in support of numerous, potentially simultaneous experiments, but this support is required to be provided for at least ten years of on-orbit operation as compared to a ten to fourteen day mission on shuttle. These differences in fundamental requirements result in the design configuration of the space station-based SAMS-2 being significantly different than that of the shuttle-based SAMS. This paper describes these differences in requirements and the planned features to be provided to the science user community. Some of the unique challenges faced in developing a general purpose measurement system are also discussed.

Sutliff, Thomas J.↗
NASA NTRSDate not supplied

NASA GeneLab RNASeq Consensus Pipeline: A Nextflow Implementation

The NASA GeneLab project (genelab.nasa.gov) seeks to accelerate space biology research through cataloging and democratizing omics data. Since raw omics data is largely inaccessible to non-bioinformaticians, GeneLab works with the scientific community to develop standard processing pipelines to generate and publish processed data. Unlike raw data, processed data has greater immediate value to a wide range of users with varying technical backgrounds and computational capabilities. Standardizing processing workflows is essential to match the pace of raw data generation, ensure reproducibility, and enable standardized processed data for comparison across datasets. Previously, GeneLab developed a standardized pipeline for processing RNAseq data, referred to as the ‘GeneLab RNAseq Consensus Pipeline (RCP)’, in collaboration with GeneLab’s Analysis Working Groups. The work presented here is a Nextflow implementation of GeneLab’s RCP that automates and accelerates data processing of RNASeq datasets hosted on GeneLab. In addition to the core data processing, the workflow also includes staging of GeneLab raw data and a robust verification and validation (V&V) program that runs after each processing step to identify errors in real-time, stop additional downstream computation, and preserve computational resources. The workflow, including the staging and V&V functionality, is open source for others to reuse and modify at https://github.com/nasa/GeneLab_Data_Processing/tree/master/RNAseq.

Jonathan Dejesus Oribello↗
NASA NTRSDate not supplied

NASA GeneLab RNASeq Consensus Pipeline: A Nextflow Implementation

The NASA GeneLab project (genelab.nasa.gov) seeks to accelerate space biology research through cataloging and democratizing omics data. Since raw omics data is largely inaccessible to non-bioinformaticians, GeneLab works with the scientific community to develop standard processing pipelines to generate and publish processed data. Unlike raw data, processed data has greater immediate value to a wide range of users with varying technical backgrounds and computational capabilities. Standardizing processing workflows is essential to match the pace of raw data generation, ensure reproducibility, and enable standardized processed data for comparison across datasets. Previously, GeneLab developed a standardized pipeline for processing RNAseq data, referred to as the ‘GeneLab RNAseq Consensus Pipeline (RCP)’, in collaboration with GeneLab’s Analysis Working Groups. The work presented here is a Nextflow implementation of GeneLab’s RCP that automates and accelerates data processing of RNASeq datasets hosted on GeneLab. In addition to the core data processing, the workflow also includes staging of GeneLab raw data and a robust verification and validation (V&V) program that runs after each processing step to identify errors in real-time, stop additional downstream computation, and preserve computational resources. The workflow, including the staging and V&V functionality, is open source for others to reuse and modify at https://github.com/nasa/GeneLab_Data_Processing/tree/master/RNAseq.

Jonathan D Oribello↗